# SPDX-License-Identifier: GPL-2.0+
-VERSION = 2018
-PATCHLEVEL = 11
+VERSION = 2019
+PATCHLEVEL = 04
SUBLEVEL =
EXTRAVERSION =
NAME =
os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
$(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
+os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
+ $(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
+
# Snow Leopards build environment has no longer restrictions as described above
HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
# in some host tools which is a problem then ... so disable ASLR for these
# tools
HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
+
+# macOS Mojave (10.14.X)
+# Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
+HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
endif
# Decide whether to build built-in, modular, or both.
no-dot-config-targets := clean clobber mrproper distclean \
help %docs check% coccicheck \
- ubootversion backup tests
+ ubootversion backup tests check qcheck
config-targets := 0
mixed-targets := 0
@# Otherwise, 'make silentoldconfig' would be invoked twice.
$(Q)touch include/config/auto.conf
-u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg: include/config.h FORCE
+u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
-include include/autoconf.mk
libs-y += drivers/mtd/spi/
libs-y += drivers/net/
libs-y += drivers/net/phy/
-libs-y += drivers/pci/
libs-y += drivers/power/ \
drivers/power/domain/ \
drivers/power/fuel_gauge/ \
libs-y += drivers/usb/common/
libs-y += drivers/usb/emul/
libs-y += drivers/usb/eth/
-libs-y += drivers/usb/gadget/
-libs-y += drivers/usb/gadget/udc/
+libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
+libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
libs-y += drivers/usb/host/
libs-y += drivers/usb/musb/
libs-y += drivers/usb/musb-new/
libs-y += env/
libs-$(CONFIG_API) += api/
libs-$(CONFIG_HAS_POST) += post/
-libs-y += test/
-libs-y += test/dm/
+libs-$(CONFIG_UNIT_TEST) += test/ test/dm/
libs-$(CONFIG_UT_ENV) += test/env/
libs-$(CONFIG_UT_OVERLAY) += test/overlay/
ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin
endif
+ALL-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
+
# Add optional build target if defined in board/cpu/soc headers
ifneq ($(CONFIG_BUILD_TARGET),)
ALL-y += $(CONFIG_BUILD_TARGET:"%"=%)
>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
quiet_cmd_mkfitimage = MKIMAGE $@
-cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E $@ \
+cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@\
>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
quiet_cmd_cat = CAT $@
cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
$(srctree)/scripts/config_whitelist.txt $(srctree)
-all: $(ALL-y) cfg
+all: $(ALL-y)
ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
- @echo "===================== WARNING ======================"
- @echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
- @echo "(possibly in a subsequent patch in your series)"
- @echo "before sending patches to the mailing list."
- @echo "===================================================="
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
+ @echo >&2 "(possibly in a subsequent patch in your series)"
+ @echo >&2 "before sending patches to the mailing list."
+ @echo >&2 "===================================================="
+endif
+ifeq ($(CONFIG_MMC),y)
+ifneq ($(CONFIG_DM_MMC)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does not use CONFIG_DM_MMC. Please update"
+ @echo >&2 "the board to use CONFIG_DM_MMC before the v2019.04 release."
+ @echo >&2 "Failure to update by the deadline may result in board removal."
+ @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+ @echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_USB),y)
+ifneq ($(CONFIG_DM_USB)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does not use CONFIG_DM_USB. Please update"
+ @echo >&2 "the board to use CONFIG_DM_USB before the v2019.07 release."
+ @echo >&2 "Failure to update by the deadline may result in board removal."
+ @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+ @echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_MVSATA_IDE),y)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does use CONFIG_MVSATA_IDE which is not"
+ @echo >&2 "ported to driver-model (DM) yet. Please update the storage"
+ @echo >&2 "controller driver to use CONFIG_AHCI before the v2019.07"
+ @echo >&2 "release."
+ @echo >&2 "Failure to update by the deadline may result in board removal."
+ @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+ @echo >&2 "===================================================="
+endif
+ifeq ($(CONFIG_LIBATA),y)
+ifneq ($(CONFIG_AHCI),y)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does use CONFIG_LIBATA but has CONFIG_AHCI not"
+ @echo >&2 "enabled. Please update the storage controller driver to use"
+ @echo >&2 "CONFIG_AHCI before the v2019.07 release."
+ @echo >&2 "Failure to update by the deadline may result in board removal."
+ @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+ @echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_PCI),y)
+ifneq ($(CONFIG_DM_PCI),y)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does not use CONFIG_DM_PCI Please update"
+ @echo >&2 "the board to use CONFIG_DM_PCI before the v2019.07 release."
+ @echo >&2 "Failure to update by the deadline may result in board removal."
+ @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+ @echo >&2 "===================================================="
+endif
+endif
+ifneq ($(CONFIG_LCD)$(CONFIG_VIDEO),)
+ifneq ($(CONFIG_DM_VIDEO),y)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does not use CONFIG_DM_VIDEO Please update"
+ @echo >&2 "the board to use CONFIG_DM_VIDEO before the v2019.07 release."
+ @echo >&2 "Failure to update by the deadline may result in board removal."
+ @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+ @echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_OF_EMBED),y)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
+ @echo >&2 "be used for debugging purposes. Please use"
+ @echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
+ @echo >&2 "See doc/README.fdt-control for more info."
+ @echo >&2 "===================================================="
+endif
+ifeq ($(CONFIG_SPI),y)
+ifneq ($(CONFIG_DM_SPI)$(CONFIG_OF_CONTROL),yy)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does not use CONFIG_DM_SPI. Please update"
+ @echo >&2 "the board before v2019.04 for no dm conversion"
+ @echo >&2 "and v2019.07 for partially dm converted drivers."
+ @echo >&2 "Failure to update can lead to driver/board removal"
+ @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+ @echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_SPI_FLASH),y)
+ifneq ($(CONFIG_DM_SPI_FLASH)$(CONFIG_OF_CONTROL),yy)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does not use CONFIG_DM_SPI_FLASH. Please update"
+ @echo >&2 "the board to use CONFIG_SPI_FLASH before the v2019.07 release."
+ @echo >&2 "Failure to update by the deadline may result in board removal."
+ @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+ @echo >&2 "===================================================="
+endif
endif
@# Check that this build does not use CONFIG options that we do not
@# know about unless they are in Kconfig. All the existing CONFIG
ifeq ($(CONFIG_MULTI_DTB_FIT),y)
+ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
+FINAL_DTB_CONTAINER = fit-dtb.blob.lzo
+else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y)
+FINAL_DTB_CONTAINER = fit-dtb.blob.gz
+else
+FINAL_DTB_CONTAINER = fit-dtb.blob
+endif
+
+fit-dtb.blob.gz: fit-dtb.blob
+ @gzip -kf9 $< > $@
+
+fit-dtb.blob.lzo: fit-dtb.blob
+ @lzop -f9 $< > $@
+
fit-dtb.blob: dts/dt.dtb FORCE
$(call if_changed,mkimage)
-a 0 -e 0 -E \
$(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
-u-boot-fit-dtb.bin: u-boot-nodtb.bin fit-dtb.blob
+u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER)
$(call if_changed,cat)
u-boot.bin: u-boot-fit-dtb.bin FORCE
else
ifneq ($(CONFIG_SPL_FIT_GENERATOR),"")
U_BOOT_ITS := u-boot.its
+ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh")
+U_BOOT_ITS_DEPS += u-boot-nodtb.bin
+endif
ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
U_BOOT_ITS_DEPS += u-boot
endif
u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
$(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE
$(call if_changed,mkimage)
+ $(BOARD_SIZE_CHECK)
+
+ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
+MKIMAGEFLAGS_u-boot.itb =
+else
+MKIMAGEFLAGS_u-boot.itb = -E
+endif
u-boot.itb: u-boot-nodtb.bin dts/dt.dtb $(U_BOOT_ITS) FORCE
$(call if_changed,mkfitimage)
SPL_PAYLOAD := u-boot.bin
endif
+SPL_IMAGE := $(CONFIG_SPL_IMAGE:"%"=%)
+
OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
--pad-to=$(CONFIG_SPL_PAD_TO)
-u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
+u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
$(call if_changed,pad_cat)
ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
SPL: spl/u-boot-spl.bin FORCE
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
+flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+endif
+
u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
$(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
$(call if_changed,u-boot-elf)
+# MediaTek's ARM-based u-boot needs a header to contains its load address
+# which is parsed by the BootROM.
+# If the SPL build is enabled, the header will be added to the spl binary,
+# and the spl binary and the u-boot.img will be combined into one file.
+# Otherwise the header will be added to the u-boot.bin directly.
+
+ifeq ($(CONFIG_SPL),y)
+spl/u-boot-spl-mtk.bin: spl/u-boot-spl
+
+u-boot-mtk.bin: u-boot.dtb u-boot.img spl/u-boot-spl-mtk.bin FORCE
+ $(call if_changed,binman)
+else
+MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
+ -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
+ -n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
+
+u-boot-mtk.bin: u-boot.bin FORCE
+ $(call if_changed,mkimage)
+endif
+
ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
# Rule to link u-boot
endif
# prepare2 creates a makefile if using a separate output directory
-prepare2: prepare3 outputmakefile
+prepare2: prepare3 outputmakefile cfg
prepare1: prepare2 $(version_h) $(timestamp_h) \
include/config/auto.conf
MRPROPER_DIRS += include/config include/generated spl tpl \
.tmp_objdiff
MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
- ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
+ ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
+ drivers/video/fonts/*.S
# clean - Delete most, but leave enough to build external modules
#
-o -name '.*.rej' -o -name '*%' -o -name 'core' \
-o -name '*.pyc' \) \
-type f -print | xargs rm -f
- @rm -f boards.cfg
+ @rm -f boards.cfg CHANGELOG
backup:
F=`basename $(srctree)` ; cd .. ; \
@echo 'Test targets:'
@echo ''
@echo ' check - Run all automated tests that use sandbox'
+ @echo ' qcheck - Run quick automated tests that use sandbox'
@echo ''
@echo 'Other generic targets:'
@echo ' all - Build all necessary images depending on configuration'
tests check:
$(srctree)/test/run
+qcheck:
+ $(srctree)/test/run quick
+
# Documentation targets
# ---------------------------------------------------------------------------
DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
projects / thirdparty / u-boot.git / blobdiff