# SPDX-License-Identifier: GPL-2.0+
VERSION = 2019
-PATCHLEVEL = 01
+PATCHLEVEL = 07
SUBLEVEL =
-EXTRAVERSION =
+EXTRAVERSION = -rc4
NAME =
# *DOCUMENTATION*
os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
$(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
+os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
+ $(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
+
# Snow Leopards build environment has no longer restrictions as described above
HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
# in some host tools which is a problem then ... so disable ASLR for these
# tools
HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
+
+# macOS Mojave (10.14.X)
+# Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
+HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
endif
# Decide whether to build built-in, modular, or both.
# KBUILD_MODULES := 1
#endif
+define size_check
+ actual=$$( wc -c $1 | awk '{print $$1}'); \
+ limit=$$( printf "%d" $2 ); \
+ if test $$actual -gt $$limit; then \
+ echo "$1 exceeds file size limit:" >&2; \
+ echo " limit: $$limit bytes" >&2; \
+ echo " actual: $$actual bytes" >&2; \
+ echo " excess: $$((actual - limit)) bytes" >&2; \
+ exit 1; \
+ fi
+endef
+export size_check
+
export KBUILD_MODULES KBUILD_BUILTIN
export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
-libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
+libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/
libs-y += drivers/serial/
libs-y += drivers/usb/dwc3/
libs-y += drivers/usb/common/
#########################################################################
ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
-BOARD_SIZE_CHECK = \
- @actual=`wc -c $@ | awk '{print $$1}'`; \
- limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
- if test $$actual -gt $$limit; then \
- echo "$@ exceeds file size limit:" >&2 ; \
- echo " limit: $$limit bytes" >&2 ; \
- echo " actual: $$actual bytes" >&2 ; \
- echo " excess: $$((actual - limit)) bytes" >&2; \
- exit 1; \
- fi
+BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
else
BOARD_SIZE_CHECK =
endif
+ifneq ($(CONFIG_SPL_SIZE_LIMIT),0)
+SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit))
+else
+SPL_SIZE_CHECK =
+endif
+
# Statically apply RELA-style relocations (currently arm64 only)
# This is useful for arm64 where static relocation needs to be performed on
# the raw binary, but certain simulators only accept an ELF file (but don't
>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
quiet_cmd_mkfitimage = MKIMAGE $@
-cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@\
+cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@\
>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
quiet_cmd_cat = CAT $@
$(srctree)/scripts/config_whitelist.txt $(srctree)
all: $(ALL-y)
+ifeq ($(CONFIG_DEPRECATED),y)
+ $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.")
+ifeq ($(CONFIG_SPI),y)
+ifneq ($(CONFIG_DM_SPI)$(CONFIG_OF_CONTROL),yy)
+ $(warning "The relevant config item with associated code will remove in v2019.07 release.")
+endif
+endif
+endif
ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
@echo >&2 "===================== WARNING ======================"
@echo >&2 "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
@echo >&2 "===================================================="
endif
endif
-ifeq ($(CONFIG_LIBATA)$(CONFIG_MVSATA_IDE),y)
-ifneq ($(CONFIG_DM_SCSI),y)
+ifeq ($(CONFIG_MVSATA_IDE),y)
@echo >&2 "===================== WARNING ======================"
- @echo >&2 "This board does not use CONFIG_DM_SCSI. Please update"
- @echo >&2 "the storage controller to use CONFIG_DM_SCSI before the v2019.07 release."
+ @echo >&2 "This board does use CONFIG_MVSATA_IDE which is not"
+ @echo >&2 "ported to driver-model (DM) yet. Please update the storage"
+ @echo >&2 "controller driver to use CONFIG_AHCI before the v2019.07"
+ @echo >&2 "release."
+ @echo >&2 "Failure to update by the deadline may result in board removal."
+ @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+ @echo >&2 "===================================================="
+endif
+ifeq ($(CONFIG_LIBATA),y)
+ifneq ($(CONFIG_AHCI),y)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does use CONFIG_LIBATA but has CONFIG_AHCI not"
+ @echo >&2 "enabled. Please update the storage controller driver to use"
+ @echo >&2 "CONFIG_AHCI before the v2019.07 release."
@echo >&2 "Failure to update by the deadline may result in board removal."
@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
@echo >&2 "===================================================="
@echo >&2 "See doc/README.fdt-control for more info."
@echo >&2 "===================================================="
endif
-ifeq ($(CONFIG_SPI),y)
-ifneq ($(CONFIG_DM_SPI)$(CONFIG_OF_CONTROL),yy)
+ifeq ($(CONFIG_SPI_FLASH),y)
+ifneq ($(CONFIG_DM_SPI_FLASH)$(CONFIG_OF_CONTROL),yy)
@echo >&2 "===================== WARNING ======================"
- @echo >&2 "This board does not use CONFIG_DM_SPI. Please update"
- @echo >&2 "the board before v2019.04 for no dm conversion"
- @echo >&2 "and v2019.07 for partially dm converted drivers."
- @echo >&2 "Failure to update can lead to driver/board removal"
+ @echo >&2 "This board does not use CONFIG_DM_SPI_FLASH. Please update"
+ @echo >&2 "the board to use CONFIG_SPI_FLASH before the v2019.07 release."
+ @echo >&2 "Failure to update by the deadline may result in board removal."
@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
@echo >&2 "===================================================="
endif
endif
-ifeq ($(CONFIG_SPI_FLASH),y)
-ifneq ($(CONFIG_DM_SPI_FLASH)$(CONFIG_OF_CONTROL),yy)
+ifneq ($(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG),)
+ifneq ($(CONFIG_WDT),y)
@echo >&2 "===================== WARNING ======================"
- @echo >&2 "This board does not use CONFIG_DM_SPI_FLASH. Please update"
- @echo >&2 "the board to use CONFIG_SPI_FLASH before the v2019.07 release."
+ @echo >&2 "This board does not use CONFIG_WDT (DM watchdog support)."
+ @echo >&2 "Please update the board to use CONFIG_WDT before the"
+ @echo >&2 "v2019.10 release."
@echo >&2 "Failure to update by the deadline may result in board removal."
@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
@echo >&2 "===================================================="
ifeq ($(CONFIG_MULTI_DTB_FIT),y)
+ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
+FINAL_DTB_CONTAINER = fit-dtb.blob.lzo
+else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y)
+FINAL_DTB_CONTAINER = fit-dtb.blob.gz
+else
+FINAL_DTB_CONTAINER = fit-dtb.blob
+endif
+
+fit-dtb.blob.gz: fit-dtb.blob
+ @gzip -kf9 $< > $@
+
+fit-dtb.blob.lzo: fit-dtb.blob
+ @lzop -f9 $< > $@
+
fit-dtb.blob: dts/dt.dtb FORCE
$(call if_changed,mkimage)
+ifneq ($(SOURCE_DATE_EPOCH),)
+ touch -d @$(SOURCE_DATE_EPOCH) fit-dtb.blob
+ chmod 0600 fit-dtb.blob
+endif
MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-a 0 -e 0 -E \
$(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
-u-boot-fit-dtb.bin: u-boot-nodtb.bin fit-dtb.blob
+ifneq ($(EXT_DTB),)
+u-boot-fit-dtb.bin: u-boot-nodtb.bin $(EXT_DTB)
+ $(call if_changed,cat)
+else
+u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER)
$(call if_changed,cat)
+endif
u-boot.bin: u-boot-fit-dtb.bin FORCE
$(call if_changed,copy)
%.imx: %.bin
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+ $(BOARD_SIZE_CHECK)
%.vyb: %.imx
$(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
spl/u-boot-spl.srec: spl/u-boot-spl FORCE
$(call if_changed,objcopy)
+%.scif: %.srec
+ $(Q)$(MAKE) $(build)=arch/arm/mach-rmobile $@
+
OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
$(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
$(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec)
$(call if_changed,mkimage)
$(BOARD_SIZE_CHECK)
+ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
+MKIMAGEFLAGS_u-boot.itb =
+else
+MKIMAGEFLAGS_u-boot.itb = -E
+endif
+
u-boot.itb: u-boot-nodtb.bin dts/dt.dtb $(U_BOOT_ITS) FORCE
$(call if_changed,mkfitimage)
$(BOARD_SIZE_CHECK)
SPL_PAYLOAD := u-boot.bin
endif
+SPL_IMAGE := $(CONFIG_SPL_IMAGE:"%"=%)
+
OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
--pad-to=$(CONFIG_SPL_PAD_TO)
-u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
+u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
$(call if_changed,pad_cat)
ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
u-boot.rom: u-boot-x86-16bit.bin u-boot.bin \
$(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
+ $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin) \
$(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE
$(call if_changed,binman)
spl/u-boot-spl.bin: spl/u-boot-spl
@:
+ $(SPL_SIZE_CHECK)
+
spl/u-boot-spl: tools prepare \
$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \
$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb)
envtools: scripts_basic $(version_h) $(timestamp_h)
$(Q)$(MAKE) $(build)=tools/env
+tools-only: export TOOLS_ONLY=y
tools-only: scripts_basic $(version_h) $(timestamp_h)
$(Q)$(MAKE) $(build)=tools
$(filter-out include, $(shell ls -1 $d 2>/dev/null))))
CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
- boot* u-boot* MLO* SPL System.map fit-dtb.blob
+ boot* u-boot* MLO* SPL System.map fit-dtb.blob*
# Directories & files removed with 'make mrproper'
MRPROPER_DIRS += include/config include/generated spl tpl \
.tmp_objdiff
MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
- ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
+ ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
+ drivers/video/fonts/*.S
# clean - Delete most, but leave enough to build external modules
#
$(build)=$(build-dir) $(@:.ko=.o)
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+quiet_cmd_genenv = GENENV $@
+cmd_genenv = $(OBJCOPY) --dump-section .rodata.default_environment=$@ env/common.o; \
+ sed --in-place -e 's/\x00/\x0A/g' $@
+
+u-boot-initial-env: u-boot.bin
+ $(call if_changed,genenv)
+
# Consistency checks
# ---------------------------------------------------------------------------
projects / thirdparty / u-boot.git / blobdiff