Init virtio before loading ENV from EXT4 or FAT

[thirdparty/u-boot.git] / doc / README.rockchip

diff --git a/doc/README.rockchip b/doc/README.rockchip
index 70c8798ed2d07de58f09d8cfe3d681151e729d91..84caff8a24d3cef5f265ecc6b305dff1be9b3440 100644 (file)
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -8,6 +8,10 @@ U-Boot on Rockchip
 
 A wide range of Rockchip SoCs are supported in mainline U-Boot
 
+Warning
+=======
+This document is being moved to doc/board/rockchip, so information on it
+might be incomplete or outdated.
 
 Prerequisites
 =============
@@ -24,77 +28,9 @@ You will need:
    - Suitable ARM cross compiler, e.g.:
         sudo apt-get install gcc-4.7-arm-linux-gnueabi
 
-
 Building
 ========
 
-At present 11 RK3288 boards are supported:
-
-   - EVB RK3288 - use evb-rk3288 configuration
-   - Firefly RK3288 - use firefly-rk3288 configuration
-   - Hisense Chromebook - use chromebook_jerry configuration
-   - Asus C100P Chromebook - use chromebook_minnie configuration
-   - Asus Chromebit - use chromebook_mickey configuration
-   - MiQi RK3288 - use miqi-rk3288 configuration
-   - phyCORE-RK3288 RDK - use phycore-rk3288 configuration
-   - PopMetal RK3288 - use popmetal-rk3288 configuration
-   - Radxa Rock 2 - use rock2 configuration
-   - Tinker RK3288 - use tinker-rk3288 configuration
-   - Vyasa RK3288 - use vyasa-rk3288 configuration
-
-Two RK3036 boards are supported:
-
-   - EVB RK3036 - use evb-rk3036 configuration
-   - Kylin - use kylin_rk3036 configuration
-
-Two RK3308 boards are supported:
-
-   - EVB RK3308 - use evb-rk3308 configuration
-   - ROC-CC-RK3308 - use roc-cc-rk3308 configuration
-
-Three RK3328 boards are supported:
-
-   - EVB RK3328 - use evb-rk3328_defconfig
-   - Pine64 Rock64 board - use rock64-rk3328_defconfig
-   - Firefly / Libre Computer Project ROC-RK3328-CC board -
-     use roc-cc-rk3328_defconfig
-
-Size RK3399 boards are supported (aarch64):
-
-   - EBV RK3399 - use evb_rk3399 configuration
-   - Firefly RK3399 - use the firefly_rk3399 configuration
-   - Puma - use puma_rk3399 configuration
-   - Ficus - use ficus-rk3399 configuration
-   - Rock960 (Vamrs) - use rock960-rk3399 configuration
-   - Bob - use chromebook_bob configuration
-
-Four RK3368 boards are supported:
-
-   - Sheep - use sheep-rk3368 configuration
-   - Lion - use lion-rk3368 configuration
-   - Geekbox - use geekbox configuration
-   - EVB PX5 - use evb-px5  configuration
-
-One RK3128 board is supported:
-
-   - EVB RK3128 - use evb-rk3128 configuration
-
-One RK3229 board is supported:
-
-   - EVB RK3229 - use evb-rk3229 configuration
-
-Two RV1108 boards are supported:
-
-   - EVB RV1108 - use evb-rv1108 configuration
-   - Elgin R1 - use elgin-rv1108 configuration
-
-One RV3188 baord is supported:
-
-   - Raxda Rock - use rock configuration
-
-
-For example:
-
 1. To build RK3288 board:
 
    CROSS_COMPILE=arm-linux-gnueabi- make O=firefly firefly-rk3288_defconfig all
@@ -102,16 +38,8 @@ For example:
     (or you can use another cross compiler if you prefer)
 
 2. To build RK3308 board:
-   - Get the rkbin
-     => git clone https://github.com/rockchip-linux/rkbin.git
 
-   - Compile U-Boot
-     => cd /path/to/u-boot
-     => export BL31=/path/to/rkbin/bin/rk33/rk3308_bl31_v2.22.elf
-     => make roc-cc-rk3308_defconfig
-     => make CROSS_COMPILE=aarch64-linux-gnu- all
-     => ./tools/mkimage -n rk3308 -T rksd -d /path/to/rkbin/bin/rk33/rk3308_ddr_589MHz_uart2_m0_v1.26.bin idbloader.img
-     => cat spl/u-boot-spl.bin  >> idbloader.img
+   See doc/board/rockchip/rockchip.rst
 
 3. To build RK3399 board:
 
@@ -145,30 +73,19 @@ For example:
 
    - Compile ATF
 
-     For Puma board.
-
-       => git clone git://git.theobroma-systems.com/arm-trusted-firmware.git
-       => cd arm-trusted-firmware
-       => make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31
-
-       (export bl31.bin)
-       => export BL31=/path/to/arm-trusted-firmware/build/rk3399/release/bl31/bl31.bin
-
-     For rest of rk3399 boards.
-
-       => git clone https://github.com/ARM-software/arm-trusted-firmware.git
-       => cd arm-trusted-firmware
+     => git clone https://github.com/ARM-software/arm-trusted-firmware.git
+     => cd arm-trusted-firmware
 
-       (export cross compiler path for Cortex-M0 MCU likely arm-none-eabi-)
-       => make realclean
-       => make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399
+     (export cross compiler path for Cortex-M0 MCU likely arm-none-eabi-)
+     => make realclean
+     => make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399
 
-       (export bl31.elf)
-       => export BL31=/path/to/arm-trusted-firmware/build/rk3399/release/bl31/bl31.elf
+    (export bl31.elf)
+    => export BL31=/path/to/arm-trusted-firmware/build/rk3399/release/bl31/bl31.elf
 
    - Compile PMU M0 firmware
 
-     This is optional for most of the rk3399 boards and required only for Puma board.
+     This is optional for most of the rk3399 boards.
 
      => git clone git://git.theobroma-systems.com/rk3399-cortex-m0.git
      => cd rk3399-cortex-m0