Merge patch series "Introduce initial TI's J784S4 and AM69 support"

Apurva Nandan <a-nandan@ti.com> says:

Hello Everyone!

This series will introduce basic support (SD and UART) support for Texas
Instruments J784S4 EVM.

The J784S4 SoC device tree patches are taken from kernel patch submissions
and will be updated as they are accepted and merged to the kernel tree.
All other patches are specific to SPL and u-boot and do not have
dependency on other trees. Appreciate a review for acceptance to u-boot
tree.

Here are some of the salient features of the J784S4 automotive grade
application processor:

The J784S4 SoC belongs to the K3 Multicore SoC architecture
platform, providing advanced system integration in automotive,
ADAS and industrial applications requiring AI at the network edge.
This SoC extends the K3 Jacinto 7 family of SoCs with focus on
raising performance and integration while providing interfaces,
memory architecture and compute performance for multi-sensor, high
concurrency applications.

Some highlights of this SoC are:
* Up to 8 Cortex-A72s, four clusters of lockstep capable dual Cortex-R5F MCUs,
  4 C7x floating point vector DSPs with Matrix Multiply Accelerator(MMA) for
  deep learning and CNN.
* 3D GPU: Automotive grade IMG BXS-4-64 MC1
* Vision Processing Accelerator (VPAC) with image signal processor and Depth
  and Motion Processing Accelerator (DMPAC)
* Three CSI2.0 4L RX plus two CSI2.0 4L TX, two DSI Tx, one eDP/DP and one
  DPI interface.
* Integrated gigabit ethernet switch, up to 8 ports (TDA4VH), two ports
  support 10Gb USXGMII; Two 4 lane PCIe-GEN3 controllers, USB3.0 Dual-role
  device subsystems, Up to 20 MCANs, among other peripherals.

See J784S4 Technical Reference Manual (SPRUJ52 - JUNE 2022)
for further details: http://www.ti.com/lit/zip/spruj52

In addtion, the J784S4 EVM board is designed for TI J784S4 SoC. It
supports the following interfaces:
* 32 GB DDR4 RAM
* x2 Gigabit Ethernet interfaces capable of working in Switch and MAC mode
* x1 Input Audio Jack, x1 Output Audio Jack
* x1 USB2.0 Hub with two Type A host and x1 USB 3.1 Type-C Port
* x2 4L PCIe connector
* x1 UHS-1 capable micro-SD card slot
* 512 Mbit OSPI flash, 1 Gbit Octal NAND flash, 512 Mbit QSPI flash,
  UFS flash.
* x6 UART through UART-USB bridge
* XDS110 for onboard JTAG debug using USB
* Temperature sensors, user push buttons and LEDs
* 40-pin User Expansion Connector
* x2 ENET Expansion Connector, x1 GESI expander, x2 Display connector
* x1 15-pin CSI header
* x6 MCAN instances

Schematics: https://www.ti.com/lit/zip/sprr458

AM69 SD mode bootlog: https://gist.githubusercontent.com/apurvanandan1997/1b2c55d0204ff0f5a47ebbc196a97e99/raw/
J784S4 SD mode bootlog: https://gist.githubusercontent.com/apurvanandan1997/5e2ef85ee4322798d22b57a60dc917db/raw/
eMMC UDA moode bootlog: https://gist.githubusercontent.com/apurvanandan1997/3cffada252d50a8aa0c00a91f1f2f856/raw/