Simon Glass [Thu, 26 Jul 2018 20:02:13 +0000 (14:02 -0600)]
libfdt: Update to latest pylibfdt implementation
The enhanced pylibfdt support in U-Boot needed for binman was a
placeholder while upstreaming of this work continued. This is now
complete, so bring in the changes and update the tools as needed.
There are quite a few changes since we decided to split the
implementation into three fdt classes instead of two.
The Fdt.del_node() method was unfortunately missed in this process and
will be dealt with later. It exists in U-Boot but not upstream.
Further syncing of libfdt probably needs to wait until we assess the
code-size impact of all the new checking code on SPL and possibly provide
a way to disable it.
Bin Meng [Fri, 3 Aug 2018 08:14:53 +0000 (01:14 -0700)]
test: dm: pci: Add cases for finding PCI capability APIs
Add several PCI capability and extended capability ID registers
in the swap_case driver, so that we can add test case for
dm_pci_find_capability() and dm_pci_find_ext_capability().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:52 +0000 (01:14 -0700)]
dm: pci: Add APIs to find capability and extended capability
This introduces two new APIs dm_pci_find_capability() and
dm_pci_find_ext_capability() to get PCI capability address and
PCI express extended capability address for a given PCI device.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:50 +0000 (01:14 -0700)]
test: dm: pci: Add tests for mixed static and dynamic devices on the same bus
In the Sandbox test configuration, PCI bus#0 only has static devices
while bus#1 only has dynamic devices. Create a bus#2 that has both
types of devices and test such.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:47 +0000 (01:14 -0700)]
sandbox: Update test.dts for dynamic PCI device driver matching
At present we have two PCI buses in the test configuration. Both
buses have static device-tree config devices. Now we switch the
2nd bus to use dynamic PCI devices for testing.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:45 +0000 (01:14 -0700)]
pci: sandbox: Support dynamically binding device driver
At present all emulated sandbox pci devices must be present in the
device tree in order to be used. The real world pci uclass driver
supports pci device driver matching, and we should add such support
on sandbox too.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
The bug only shows up when bus number is not equal to zero. This is
caused by the plain find_devfn parameter is passed to function call
pci_bus_find_devfn(), inside which find_devfn is compared to devfn
in the device's pplat structure. However pplat->devfn does not carry
the bus number. Fix this by passing find_devfn with bus number masked.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:41 +0000 (01:14 -0700)]
test: dm: pci: Test more than one PCI host controller
So far there is only one PCI host controller in the sandbox test
configuration. This is normally the case for x86, but it can be
common on other architectures like ARM/PPC to have more than one
PCI host controller in the system.
This updates the case to cover such scenario.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:40 +0000 (01:14 -0700)]
pci: sandbox: swap_case: Preserve space indicator bit in BAR registers
With the newly added testing of more than one device, we get:
=> ut dm pci_swapcase
Test: dm_test_pci_swapcase: pci.c
test/dm/pci.c:88, dm_test_pci_swapcase(): "tHIS IS A tESt" = ptr:
Expected "tHIS IS A tESt", got "this is a test"
Test: dm_test_pci_swapcase: pci.c (flat tree)
test/dm/pci.c:88, dm_test_pci_swapcase(): "tHIS IS A tESt" = ptr:
Expected "tHIS IS A tESt", got "this is a test"
Failures: 2
The failure only happens on the 2nd swap_case device on the PCI bus.
The case passes on the 1st device.
It turns out the swap_case driver does not emulate bit#0 in BAR
registers as a read-only bit. This corrects the implementation.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:37 +0000 (01:14 -0700)]
dm: pci: Fix scanning multi-function device
The flag to control whether to scan multi-function device during
enumeration should be cleared at the beginning of each iteration
if the device's function number equals to zero.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:36 +0000 (01:14 -0700)]
dm: pci: Extract vendor/device id in child_post_bind()
Currently only devfn is extracted in child_post_bind(). Now that
we have the live-tree version API to look up PCI vendor and device
id from the compatible string, let's extract and save them too.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Wed, 11 Jul 2018 13:05:25 +0000 (09:05 -0400)]
mips: au1x00: Remove support for these SoCs
The only platform left for the AU1x00 SoCs was the pb1x00 platform, an
apparent clone of the dbau1x00 platform. As pb1x00 had no listed
maintainer I am assuming that it is also orphaned. Remove this platform
and then remove the unused SoC support.
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tom Rini [Mon, 9 Jul 2018 19:09:55 +0000 (15:09 -0400)]
mips: dbau1x00: Remove this board
This platform has been marked as orphan since June of 2016 and should
have been removed some time ago. Do so now.
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Luis Araneda [Fri, 27 Jul 2018 08:43:42 +0000 (04:43 -0400)]
arm: zynq: dts: add spi flash node to zedboard
Add a flash node to fix the detection of the memory IC.
With the changes introduced with commit 8fee8845e754
("enf_sf: reuse setup_flash_device instead of open coding it")
the SPI speed is now read from device-tree or a default value
is applied. This replaced the old behavior of setting the
SPI speed to CONFIG_ENV_SPI_MAX_HZ.
As this board didn't have a flash node, the default value
was applied to the SPI speed, producing an error when probing
the flash memory (speed too slow).
Signed-off-by: Luis Araneda <luaraneda@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Mon, 6 Aug 2018 05:42:40 +0000 (07:42 +0200)]
gpio: xilinx: Return 0 from xilinx_gpio_set_value
.set_value functions have no specified return value and gpio_uclass is
not working with it too. But this patch is returning 0 to be in sync
with others DM gpio drivers.
Reported-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Michal Simek [Mon, 23 Jul 2018 10:40:36 +0000 (12:40 +0200)]
gpio: xilinx: Not read output values via regs
Reading registers for finding out output value is not working because
input value is read instead in case of tristate.
Reported-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Michal Simek [Mon, 30 Jul 2018 12:29:27 +0000 (14:29 +0200)]
gpio: xilinx: Simplify logic in xilinx_gpio_set_value
There is no reason to do read/write for if/else separately.
Reported-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Michal Simek [Mon, 30 Jul 2018 08:02:53 +0000 (10:02 +0200)]
gpio: xilinx: Set value before changing direction
Set a value before changing gpio direction. This will ensure that the
old value is not propagated when direction has changed but new value is
not written yet.
Reported-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Michal Simek [Mon, 23 Jul 2018 10:08:49 +0000 (12:08 +0200)]
gpio: xilinx: Find out bank before use in xilinx_gpio_get_function()
Call xilinx_gpio_get_bank_pin() before use.
Reported-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Vladimir Vid [Fri, 13 Jul 2018 09:56:00 +0000 (11:56 +0200)]
arm64: a37xx: add CONFIG_MTD_DEVICE and CONFIG_MTD_PARTITIONS
CONFIG_MTD_DEVICE is required for the mtdparts command and but it is missing from the mvebu_armada-37xx.h
CONFIG_MTD_PARTITIONS is needed for the ubi support. Some of the Marvell based devices may require this as well.
Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> Signed-off-by: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: Stefan Roese <sr@denx.de>
tools: kwboot: properly quit when read() returns 0
When kwboot is attached to a terminal which disappears such as one
connected via an unplugged USB cable, read() returns 0, making kwboot
loop until a key is pressed in the terminal. The only case where read()
may return 0 here is when the terminal is closed anyway, so let's
properly handle this one and report is similar to other errors.
Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Stefan Roese <sr@denx.de>
Commit 84899e2 ("tools/kwboot: Sync with latest barebox version to
support Armada XP") accidently broke the terminal-only mode (-t) by
removing the test on the bootmsg. Thus even when trying to use kwboot
as a plain terminal, it asks to reboot the target.
This commit simply reintroduces the lost test so that it is possible
again to use kwboot to attach to the target system's console.
Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Mon, 25 Jun 2018 10:34:57 +0000 (22:34 +1200)]
ARM: kirkwood: add SBx81LIFXCAT board
This is a series of line cards for Allied Telesis's SBx8100 chassis
switch. The CPU block is common to the SBx81GP24 and SBx81GT24 cards
cards collectively referred to as SBx81LIFXCAT in u-boot.
Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
Jon Nettleton [Thu, 21 Jun 2018 09:35:49 +0000 (12:35 +0300)]
arm: mvebu: clearfog: add u-boot, dm-spl tag for spi
This is required so SPL and u-boot can boot from spi
flash devices that use the dm drivers.
Signed-off-by: Jon Nettleton <jon@solid-run.com>
[baruch: use -u-boot.dtsi] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
The same pinctrl node appears in the solidrun-microsom dtsi. Use that
instead.
Cc: Dennis Gilmore <dennis@ausil.us> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Dennis Gilmore <dennis@ausil.us> Tested-by: Dennis Gilmore <dennis@ausil.us> Signed-off-by: Stefan Roese <sr@denx.de>
Jon Nettleton [Thu, 14 Jun 2018 15:17:53 +0000 (18:17 +0300)]
arm: mvebu: Better align Clearfog dts file with Linux kernel
This makes changes so the u-boot dts file is structured more
similar to the mainline linux dtsi file. It provides a minimal
common dts that can work for most boards based on the ClearFog
platform. Ethernet support is only supported for eth0 however
all devices are left enabled so u-boot can generate and
provide mac addresses for all of the network interfaces.
Signed-off-by: Jon Nettleton <jon@solid-run.com>
[baruch: rebase on recent changes] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Dennis Gilmore <dennis@ausil.us> Tested-by: Dennis Gilmore <dennis@ausil.us> Signed-off-by: Stefan Roese <sr@denx.de>
Baruch Siach [Mon, 18 Jun 2018 18:56:25 +0000 (21:56 +0300)]
mvebu: select boot device at SoC level
Move the gdsys Controlcenter DC specific build time kwbimage.cfg
generation code into the mach-mvebu/ directory to be shared by all 32bit
mvebu platforms.
Remove board specific kwbimage.cfg files, and use the generated one
instead. These files are all identical, with two exceptions. Clearfog
and Helios4 use the sdio boot device, whereas all others use spi. Update
the defconfigs for the exceptional boards to generate the same
kwbimage.cfg as before.
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
Baruch Siach [Mon, 18 Jun 2018 18:56:24 +0000 (21:56 +0300)]
mvebu: consolidate SPL boot device config symbols
Use MVEBU_SPL_BOOT_DEVICE_* to select between SPI and MMC, instead of
board specific symbols. This commit enables the boot device selection
menu to all mvebu platforms, but it is only effective on Turris Omnia
and gdsys Controlcenter DC platforms. A following commit will enable
boot selection for other platforms.
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
Baruch Siach [Mon, 18 Jun 2018 18:56:22 +0000 (21:56 +0300)]
mvebu: turris_omnia: use u-boot-spl-dtb.bin
u-boot-spl.bin and u-boot-spl-dtb.bin are identical when building the
turris_omnia_defconfig. This commit makes Turris Omnia consistent with
all other mvebu boards.
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
Peng Fan [Fri, 27 Jul 2018 02:20:39 +0000 (10:20 +0800)]
dm: power-domain: query power domain after get device
This is to test power_domain_on in device_probe.
If the device has a power-domain property, enable it
when probe the device. So add the test to check
whether it is powered on or not.
Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Michal Simek [Mon, 23 Jul 2018 06:34:43 +0000 (08:34 +0200)]
microblaze: Add missing quotes around XILINX_MICROBLAZE0_HW_VER
This issue is reported by kconfiglib:
warning: style: quotes recommended around default value for string
symbol XILINX_MICROBLAZE0_HW_VER (defined at
board/xilinx/microblaze-generic/Kconfig:37)
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Lukasz Majewski [Wed, 1 Aug 2018 12:48:59 +0000 (14:48 +0200)]
ARM: Odroid XU3: Fix the dwmci_exynos *priv data assignment for DM_MMC (sdr_timing)
By convention for DM_MMC the host->priv is used to store struct udevice
*dev pointer.
Unfortunately, the legacy Exynos DW MMC code uses this field to
store pointer to dwmci_exynos_priv_data struct
Hence, we do need to get data in other way - namely by using container_of
when host pointer is present.
In this way the sdr_timing data is properly accessed.
Neil Armstrong [Thu, 26 Jul 2018 13:19:32 +0000 (15:19 +0200)]
clk: clk_set_default: accept no-op skip fields
The Assigned Clock parents and rates misses the fact that a "0" entry can
be passed to skip setting a parent or rate of an assigned clock as
described in the Linux clock bindings at [1].
This patch simply skips the clock reparenting if the DT parsing returns
-ENOENT and the clock rate setting if "0" is passed as clock rate.
mmc: arm_pl180_mmci: Remove cd_inverted host's struct field
As platform uses GPIOs for card detection, it's
simpler and more readable to use GPIO_ACTIVE_(LOW|HIGH)
in the gpio flags instead of using the cd-inverted
property.
Reported-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
projects / thirdparty / u-boot.git / log
