ASoC: stm32_sai: fix incorrect BCLK polarity for DSP_A/B, LEFT_J

ASoC: stm32_sai: fix incorrect BCLK polarity for DSP_A/B, LEFT_J

The STM32 SAI driver do not set the clock strobing bit (CKSTR) for DSP_A,
DSP_B and LEFT_J formats, causing data to be sampled on the wrong BCLK
edge when SND_SOC_DAIFMT_NB_NF is used.

Per ALSA convention, NB_NF requires sampling on the rising BCLK edge.
The STM32MP25 SAI reference manual states that CKSTR=1 is required for
signals received by the SAI to be sampled on the SCK rising edge.
Without setting CKSTR=1, the SAI samples on the falling edge, violating
the NB_NF convention. For comparison, the NXP FSL SAI driver correctly
sets FSL_SAI_CR2_BCP for DSP_A, DSP_B and LEFT_J, consistent with its
I2S handling.

This patch adds SAI_XCR1_CKSTR for DSP_A, DSP_B and LEFT_J in
stm32_sai_set_dai_fmt which was verified empirically with a cs47l35 codec.
RIGHT_J (LSB) is not investigated and addressed by this patch.

Note: the STM32 I2S driver (stm32_i2s_set_dai_fmt) may have the same issue
for DSP_A mode, as I2S_CGFR_CKPOL is not set. This has not been verified
and is left for a separate investigation.

Signed-off-by: Tomasz Merta <tommerta@gmail.com>
Link: https://patch.msgid.link/20260408084056.20588-1-tommerta@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>