sig_analog: Changes to improve electromechanical signalling compatibility

sig_analog: Changes to improve electromechanical signalling compatibility

This changeset is intended to address compatibility issues encountered
when interfacing Asterisk to electromechanical telephone switches that
implement ANI-B, ANI-C, or ANI-D.

In particular the behaviours that this impacts include:

 - FGC-CAMA did not work at all when using MF signaling. Modified the
   switch case block to send calls to the correct part of the
   signaling-handling state machine.

 - For FGC-CAMA operation, the delay between called number ST and
   second wink for ANI spill has been made configurable; previously
   all calls were made to wait for one full second.

 - After the ANI spill, previous behavior was to require a 'ST' tone
   to advance the call.  This has been changed to allow 'STP' 'ST2P'
   or 'ST3P' as well, for compatibility with ANI-D.

 - Store ANI2 (ANI INFO) digits in the CALLERID(ANI2) channel variable.

 - For calls with an ANI failure, No. 1 Crossbar switches will send
   forward a single-digit failure code, with no calling number digits
   and no ST pulse to terminate the spill.  I've made the ANI timeout
   configurable so to reduce dead air time on calls with ANI fail.

 - ANI info digits configurable.  Modern digital switches will send 2
   digits, but ANI-B sends only a single info digit.  This caused the
   ANI reported by Asterisk to be misaligned.

 - Changed a confusing log message to be more informative.

ASTERISK-29518

Change-Id: Ib7e27d987aee4ed9bc3663c57ef413e21b404256