tools/hv: update route parsing in kvp daemon

tools/hv: update route parsing in kvp daemon

After recent changes in the VM network stack, the host fails to
display the IP addresses of the VM. As a result the "IP Addresses"
column in the "Networking" tab in the Windows Hyper-V Manager is
empty. This is caused by a change in the expected output of the
"ip route show" command. Previously the gateway address was shown
in the third row. Now the gateway addresses might be split into
several lines of output. As a result, the string "ra" instead of
an IP address is sent to the host.

To me more specific, a VM with the wellknown wicked network
managing tool still shows the expected output in recent openSUSE
Tumbleweed snapshots:

ip a show dev uplink;ip -4 route show;ip -6 route show
2: uplink: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state ...
    link/ether 00:15:5d:d0:93:08 brd ff:ff:ff:ff:ff:ff
    inet 1.2.3.4/22 brd 1.2.3.255 scope global uplink
       valid_lft forever preferred_lft forever
    inet6 fe80::215:5dff:fed0:9308/64 scope link proto kernel_ll
       valid_lft forever preferred_lft forever
default via 1.2.3.254 dev uplink proto dhcp
1.2.3.0/22 dev uplink proto kernel scope link src 1.2.3.4
fe80::/64 dev uplink proto kernel metric 256 pref medium
default via fe80::26fc:4e00:3b:74 dev uplink proto ra metric 1024 exp...
default via fe80::6a22:8e00:fb:14f8 dev uplink proto ra metric 1024 e...

A similar VM, but with NetworkManager as network managing tool:

ip a show dev eth0;ip -4 route show;ip -6 route show
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP...
    link/ether 00:15:5d:d0:93:0b brd ff:ff:ff:ff:ff:ff
    inet 1.2.3.8/22 brd 1.2.3.255 scope global dynamic noprefixroute ...
       valid_lft 1022sec preferred_lft 1022sec
    inet6 fe80::215:5dff:fed0:930b/64 scope link noprefixroute
       valid_lft forever preferred_lft forever
default via 1.2.3.254 dev eth0 proto dhcp src 1.2.3.8 metric 100
1.2.3.0/22 dev eth0 proto kernel scope link src 1.2.3.8 metric 100
fe80::/64 dev eth0 proto kernel metric 1024 pref medium
default proto ra metric 20100 pref medium
        nexthop via fe80::6a22:8e00:fb:14f8 dev eth0 weight 1
        nexthop via fe80::26fc:4e00:3b:74 dev eth0 weight 1

Adjust the route parsing to use a single line for each line of
output. Also use a single shell invocation to retrieve both IPv4
and IPv6 information. The actual IP addresses are expected after
the "via" keyword.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://lore.kernel.org/r/20241202102235.9701-1-olaf@aepfle.de
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241202102235.9701-1-olaf@aepfle.de>