Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 for RTL8852BE-VT

Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 for RTL8852BE-VT

Add the support ID(0x13d3, 0x3618) to usb_device_id table for
Realtek RTL8852BE-VT.

The device info from /sys/kernel/debug/usb/devices as below.

    T:  Bus=04 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 86 Spd=12   MxCh= 0
    D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
    P:  Vendor=13d3 ProdID=3618 Rev= 0.00
    S:  Manufacturer=Realtek
    S:  Product=Bluetooth Radio
    S:  SerialNumber=00e04c000001
    C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
    I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
    E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
    E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
    I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
    E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
    I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
    E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
    I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
    I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
    I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
    I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>