bss->ctx = ctx;
os_strlcpy(bss->ifname, ifname, sizeof(bss->ifname));
- drv->monitor_ifidx = -1;
- drv->monitor_sock = -1;
drv->eapol_tx_sock = -1;
drv->ap_scan_as_station = NL80211_IFTYPE_UNSPECIFIED;
"nl80211: wifi status sockopt failed: %s",
strerror(errno));
drv->data_tx_status = 0;
- if (!drv->use_monitor)
- drv->capa.flags &=
- ~WPA_DRIVER_FLAGS_EAPOL_TX_STATUS;
+ drv->capa.flags &= ~WPA_DRIVER_FLAGS_EAPOL_TX_STATUS;
} else {
eloop_register_read_sock(
drv->eapol_tx_sock,
bss->brname, strerror(errno));
}
- nl80211_remove_monitor_interface(drv);
-
if (is_ap_interface(drv->nlmode)) {
wpa_driver_nl80211_del_beacon_all(bss);
nl80211_remove_links(bss);
{
struct wpa_driver_nl80211_data *drv = bss->drv;
struct ieee80211_mgmt *mgmt;
- int encrypt = !no_encrypt;
u16 fc;
int use_cookie = 1;
int res;
goto send_frame_cmd;
}
- if (WLAN_FC_GET_TYPE(fc) == WLAN_FC_TYPE_MGMT &&
- WLAN_FC_GET_STYPE(fc) == WLAN_FC_STYPE_AUTH) {
- /*
- * Only one of the authentication frame types is encrypted.
- * In order for static WEP encryption to work properly (i.e.,
- * to not encrypt the frame), we need to tell mac80211 about
- * the frames that must not be encrypted.
- */
- u16 auth_alg = le_to_host16(mgmt->u.auth.auth_alg);
- u16 auth_trans = le_to_host16(mgmt->u.auth.auth_transaction);
- if (auth_alg != WLAN_AUTH_SHARED_KEY || auth_trans != 3)
- encrypt = 0;
- }
-
if ((is_sta_interface(drv->nlmode) ||
drv->nlmode == NL80211_IFTYPE_P2P_DEVICE) &&
WLAN_FC_GET_TYPE(fc) == WLAN_FC_TYPE_MGMT &&
freq = link->freq;
}
- if (drv->use_monitor && is_ap_interface(drv->nlmode)) {
- wpa_printf(MSG_DEBUG,
- "nl80211: send_frame(freq=%u bss->freq=%u) -> send_monitor",
- freq, link->freq);
- return nl80211_send_monitor(drv, data, data_len, encrypt,
- noack);
- }
-
if ((noack || WLAN_FC_GET_TYPE(fc) != WLAN_FC_TYPE_MGMT ||
WLAN_FC_GET_STYPE(fc) != WLAN_FC_STYPE_ACTION) &&
link_id == NL80211_DRV_LINK_ID_NA)
use_cookie = 0;
send_frame_cmd:
#ifdef CONFIG_TESTING_OPTIONS
- if (no_encrypt && !encrypt && !drv->use_monitor) {
+ if (no_encrypt) {
wpa_printf(MSG_DEBUG,
"nl80211: Request to send an unencrypted frame - use a monitor interface for this");
- if (nl80211_create_monitor_interface(drv) < 0)
- return -1;
- res = nl80211_send_monitor(drv, data, data_len, encrypt,
- noack);
- nl80211_remove_monitor_interface(drv);
- return res;
+ return nl80211_send_monitor(drv, data, data_len, !no_encrypt,
+ noack);
}
#endif /* CONFIG_TESTING_OPTIONS */
beacon_set);
if (beacon_set)
cmd = NL80211_CMD_SET_BEACON;
- else if (!drv->device_ap_sme && !drv->use_monitor &&
- !nl80211_get_wiphy_data_ap(bss))
+ else if (!drv->device_ap_sme && !nl80211_get_wiphy_data_ap(bss))
return -ENOBUFS;
wpa_hexdump(MSG_DEBUG, "nl80211: Beacon head",
nla_put_u32(msg, NL80211_ATTR_IFTYPE, iftype))
goto fail;
- if (iftype == NL80211_IFTYPE_MONITOR) {
- struct nlattr *flags;
-
- flags = nla_nest_start(msg, NL80211_ATTR_MNTR_FLAGS);
- if (!flags ||
- nla_put_flag(msg, NL80211_MNTR_FLAG_COOK_FRAMES))
- goto fail;
-
- nla_nest_end(msg, flags);
- } else if (wds) {
- if (nla_put_u8(msg, NL80211_ATTR_4ADDR, wds))
- goto fail;
- }
+ if (wds && nla_put_u8(msg, NL80211_ATTR_4ADDR, wds))
+ goto fail;
/*
* Tell cfg80211 that the interface belongs to the socket that created
{
struct wpa_driver_nl80211_data *drv = bss->drv;
- wpa_printf(MSG_DEBUG, "nl80211: Setup AP(%s) - device_ap_sme=%d use_monitor=%d",
- bss->ifname, drv->device_ap_sme, drv->use_monitor);
+ wpa_printf(MSG_DEBUG, "nl80211: Setup AP(%s) - device_ap_sme=%d",
+ bss->ifname, drv->device_ap_sme);
/*
* Disable Probe Request reporting unless we need it in this way for
if (!drv->device_ap_sme)
wpa_driver_nl80211_probe_req_report(bss, 0);
- if (!drv->device_ap_sme && !drv->use_monitor)
- if (nl80211_mgmt_subscribe_ap(bss))
- return -1;
-
- if (drv->device_ap_sme && !drv->use_monitor)
- if (nl80211_mgmt_subscribe_ap_dev_sme(bss))
- wpa_printf(MSG_DEBUG,
- "nl80211: Failed to subscribe for mgmt frames from SME driver - trying to run without it");
-
- if (!drv->device_ap_sme && drv->use_monitor &&
- nl80211_create_monitor_interface(drv) &&
- !drv->device_ap_sme)
+ if (!drv->device_ap_sme && nl80211_mgmt_subscribe_ap(bss))
return -1;
+ if (drv->device_ap_sme && nl80211_mgmt_subscribe_ap_dev_sme(bss))
+ wpa_printf(MSG_DEBUG,
+ "nl80211: Failed to subscribe for mgmt frames from SME driver - trying to run without it");
+
if (drv->device_ap_sme &&
wpa_driver_nl80211_probe_req_report(bss, 1) < 0) {
wpa_printf(MSG_DEBUG, "nl80211: Failed to enable "
{
struct wpa_driver_nl80211_data *drv = bss->drv;
- wpa_printf(MSG_DEBUG, "nl80211: Teardown AP(%s) - device_ap_sme=%d use_monitor=%d",
- bss->ifname, drv->device_ap_sme, drv->use_monitor);
+ wpa_printf(MSG_DEBUG, "nl80211: Teardown AP(%s) - device_ap_sme=%d",
+ bss->ifname, drv->device_ap_sme);
if (drv->device_ap_sme) {
wpa_driver_nl80211_probe_req_report(bss, 0);
- if (!drv->use_monitor)
- nl80211_mgmt_unsubscribe(bss, "AP teardown (dev SME)");
- } else if (drv->use_monitor)
- nl80211_remove_monitor_interface(drv);
- else
+ nl80211_mgmt_unsubscribe(bss, "AP teardown (dev SME)");
+ } else {
nl80211_mgmt_unsubscribe(bss, "AP teardown");
+ }
nl80211_put_wiphy_data_ap(bss);
if (bss->flink)
}
-static const u8 rfc1042_header[6] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
-
static int wpa_driver_nl80211_hapd_send_eapol(
void *priv, const u8 *addr, const u8 *data,
size_t data_len, int encrypt, const u8 *own_addr, u32 flags,
{
struct i802_bss *bss = priv;
struct wpa_driver_nl80211_data *drv = bss->drv;
- struct ieee80211_hdr *hdr;
- size_t len;
- u8 *pos;
- int res;
- int qos = flags & WPA_STA_WMM;
/* For now, disable EAPOL TX over control port in AP mode by default
* since it does not provide TX status notifications. */
data, data_len, !encrypt,
link_id);
- if (drv->device_ap_sme || !drv->use_monitor)
- return nl80211_send_eapol_data(bss, addr, data, data_len);
-
- len = sizeof(*hdr) + (qos ? 2 : 0) + sizeof(rfc1042_header) + 2 +
- data_len;
- hdr = os_zalloc(len);
- if (hdr == NULL) {
- wpa_printf(MSG_INFO, "nl80211: Failed to allocate EAPOL buffer(len=%lu)",
- (unsigned long) len);
- return -1;
- }
-
- hdr->frame_control =
- IEEE80211_FC(WLAN_FC_TYPE_DATA, WLAN_FC_STYPE_DATA);
- hdr->frame_control |= host_to_le16(WLAN_FC_FROMDS);
- if (encrypt)
- hdr->frame_control |= host_to_le16(WLAN_FC_ISWEP);
- if (qos) {
- hdr->frame_control |=
- host_to_le16(WLAN_FC_STYPE_QOS_DATA << 4);
- }
-
- memcpy(hdr->IEEE80211_DA_FROMDS, addr, ETH_ALEN);
- memcpy(hdr->IEEE80211_BSSID_FROMDS, own_addr, ETH_ALEN);
- memcpy(hdr->IEEE80211_SA_FROMDS, own_addr, ETH_ALEN);
- pos = (u8 *) (hdr + 1);
-
- if (qos) {
- /* Set highest priority in QoS header */
- pos[0] = 7;
- pos[1] = 0;
- pos += 2;
- }
-
- memcpy(pos, rfc1042_header, sizeof(rfc1042_header));
- pos += sizeof(rfc1042_header);
- WPA_PUT_BE16(pos, ETH_P_PAE);
- pos += 2;
- memcpy(pos, data, data_len);
-
- res = nl80211_send_monitor(drv, hdr, len, encrypt, 0);
- if (res < 0) {
- wpa_printf(MSG_ERROR,
- "hapd_send_eapol - packet len: %lu - failed",
- (unsigned long) len);
- }
- os_free(hdr);
-
- return res;
+ return nl80211_send_eapol_data(bss, addr, data, data_len);
}
nlmode = NL80211_IFTYPE_AP;
old_mode = drv->nlmode;
- if (wpa_driver_nl80211_set_mode(drv->first_bss, nlmode)) {
- nl80211_remove_monitor_interface(drv);
+ if (wpa_driver_nl80211_set_mode(drv->first_bss, nlmode))
return -1;
- }
if (params->freq.freq &&
nl80211_set_channel(drv->first_bss, ¶ms->freq, 0)) {
if (old_mode != nlmode)
wpa_driver_nl80211_set_mode(drv->first_bss, old_mode);
- nl80211_remove_monitor_interface(drv);
return -1;
}
}
#endif /* CONFIG_MESH */
- if (is_ap_interface(drv->nlmode) &&
- (!(drv->capa.flags & WPA_DRIVER_FLAGS_OFFCHANNEL_TX) ||
- (int) freq == bss->flink->freq || drv->device_ap_sme ||
- !drv->use_monitor))
+ if (is_ap_interface(drv->nlmode))
ret = wpa_driver_nl80211_send_mlme(bss, buf, 24 + data_len,
0, freq, no_cck, offchanok,
wait_time, NULL, 0, 0,
}
#endif /* CONFIG_P2P */
- if (os_strstr(param, "use_monitor=1"))
- drv->use_monitor = 1;
-
if (os_strstr(param, "force_connect_cmd=1")) {
drv->capa.flags &= ~WPA_DRIVER_FLAGS_SME;
drv->force_connect_cmd = 1;
"prev_bssid=" MACSTR "\n"
"associated=%d\n"
"assoc_freq=%u\n"
- "monitor_sock=%d\n"
- "monitor_ifidx=%d\n"
- "monitor_refcount=%d\n"
"last_mgmt_freq=%u\n"
"eapol_tx_sock=%d\n"
- "%s%s%s%s%s%s%s%s%s%s%s%s%s",
+ "%s%s%s%s%s%s%s%s%s%s%s%s",
drv->phyname,
MAC2STR(drv->perm_addr),
drv->ifindex,
MAC2STR(drv->prev_bssid),
drv->associated,
drv->assoc_freq,
- drv->monitor_sock,
- drv->monitor_ifidx,
- drv->monitor_refcount,
drv->last_mgmt_freq,
drv->eapol_tx_sock,
drv->ignore_if_down_event ?
drv->data_tx_status ? "data_tx_status=1\n" : "",
drv->scan_for_auth ? "scan_for_auth=1\n" : "",
drv->retry_auth ? "retry_auth=1\n" : "",
- drv->use_monitor ? "use_monitor=1\n" : "",
drv->ignore_next_local_disconnect ?
"ignore_next_local_disconnect\n" : "",
drv->ignore_next_local_deauth ?
#include "driver_nl80211.h"
-static void handle_tx_callback(void *ctx, u8 *buf, size_t len, int ok)
-{
- struct ieee80211_hdr *hdr;
- u16 fc;
- union wpa_event_data event;
-
- hdr = (struct ieee80211_hdr *) buf;
- fc = le_to_host16(hdr->frame_control);
-
- os_memset(&event, 0, sizeof(event));
- event.tx_status.type = WLAN_FC_GET_TYPE(fc);
- event.tx_status.stype = WLAN_FC_GET_STYPE(fc);
- event.tx_status.dst = hdr->addr1;
- event.tx_status.data = buf;
- event.tx_status.data_len = len;
- event.tx_status.ack = ok;
- wpa_supplicant_event(ctx, EVENT_TX_STATUS, &event);
-}
-
-
-static void from_unknown_sta(struct wpa_driver_nl80211_data *drv,
- u8 *buf, size_t len)
-{
- struct ieee80211_hdr *hdr = (void *)buf;
- u16 fc;
- union wpa_event_data event;
-
- if (len < sizeof(*hdr))
- return;
-
- fc = le_to_host16(hdr->frame_control);
-
- os_memset(&event, 0, sizeof(event));
- event.rx_from_unknown.bssid = get_hdr_bssid(hdr, len);
- event.rx_from_unknown.addr = hdr->addr2;
- event.rx_from_unknown.wds = (fc & (WLAN_FC_FROMDS | WLAN_FC_TODS)) ==
- (WLAN_FC_FROMDS | WLAN_FC_TODS);
- wpa_supplicant_event(drv->ctx, EVENT_RX_FROM_UNKNOWN, &event);
-}
-
-
-static void handle_frame(struct wpa_driver_nl80211_data *drv,
- u8 *buf, size_t len, int datarate, int ssi_signal)
-{
- struct ieee80211_hdr *hdr;
- u16 fc;
- union wpa_event_data event;
-
- if (!drv->use_monitor)
- return;
-
- hdr = (struct ieee80211_hdr *) buf;
- fc = le_to_host16(hdr->frame_control);
-
- switch (WLAN_FC_GET_TYPE(fc)) {
- case WLAN_FC_TYPE_MGMT:
- os_memset(&event, 0, sizeof(event));
- event.rx_mgmt.frame = buf;
- event.rx_mgmt.frame_len = len;
- event.rx_mgmt.datarate = datarate;
- event.rx_mgmt.ssi_signal = ssi_signal;
- wpa_supplicant_event(drv->ctx, EVENT_RX_MGMT, &event);
- break;
- case WLAN_FC_TYPE_CTRL:
- /* can only get here with PS-Poll frames */
- wpa_printf(MSG_DEBUG, "CTRL");
- from_unknown_sta(drv, buf, len);
- break;
- case WLAN_FC_TYPE_DATA:
- from_unknown_sta(drv, buf, len);
- break;
- }
-}
-
-
-static void handle_monitor_read(int sock, void *eloop_ctx, void *sock_ctx)
-{
- struct wpa_driver_nl80211_data *drv = eloop_ctx;
- int len;
- unsigned char buf[3000];
- struct ieee80211_radiotap_iterator iter;
- int ret;
- int datarate = 0, ssi_signal = 0;
- int injected = 0, failed = 0, rxflags = 0;
-
- len = recv(sock, buf, sizeof(buf), 0);
- if (len < 0) {
- wpa_printf(MSG_ERROR, "nl80211: Monitor socket recv failed: %s",
- strerror(errno));
- return;
- }
-
- if (ieee80211_radiotap_iterator_init(&iter, (void *) buf, len, NULL)) {
- wpa_printf(MSG_INFO, "nl80211: received invalid radiotap frame");
- return;
- }
-
- while (1) {
- ret = ieee80211_radiotap_iterator_next(&iter);
- if (ret == -ENOENT)
- break;
- if (ret) {
- wpa_printf(MSG_INFO, "nl80211: received invalid radiotap frame (%d)",
- ret);
- return;
- }
- switch (iter.this_arg_index) {
- case IEEE80211_RADIOTAP_FLAGS:
- if (*iter.this_arg & IEEE80211_RADIOTAP_F_FCS)
- len -= 4;
- break;
- case IEEE80211_RADIOTAP_RX_FLAGS:
- rxflags = 1;
- break;
- case IEEE80211_RADIOTAP_TX_FLAGS:
- injected = 1;
- failed = le_to_host16((*(le16 *) iter.this_arg)) &
- IEEE80211_RADIOTAP_F_TX_FAIL;
- break;
- case IEEE80211_RADIOTAP_DATA_RETRIES:
- break;
- case IEEE80211_RADIOTAP_CHANNEL:
- /* TODO: convert from freq/flags to channel number */
- break;
- case IEEE80211_RADIOTAP_RATE:
- datarate = *iter.this_arg * 5;
- break;
- case IEEE80211_RADIOTAP_DBM_ANTSIGNAL:
- ssi_signal = (s8) *iter.this_arg;
- break;
- }
- }
-
- if (rxflags && injected)
- return;
-
- if (!injected)
- handle_frame(drv, buf + iter._max_length,
- len - iter._max_length, datarate, ssi_signal);
- else
- handle_tx_callback(drv->ctx, buf + iter._max_length,
- len - iter._max_length, !failed);
-}
-
-
-/*
- * we post-process the filter code later and rewrite
- * this to the offset to the last instruction
- */
-#define PASS 0xFF
-#define FAIL 0xFE
+#ifdef CONFIG_TESTING_OPTIONS
static struct sock_filter msock_filter_insns[] = {
- /*
- * do a little-endian load of the radiotap length field
- */
- /* load lower byte into A */
- BPF_STMT(BPF_LD | BPF_B | BPF_ABS, 2),
- /* put it into X (== index register) */
- BPF_STMT(BPF_MISC| BPF_TAX, 0),
- /* load upper byte into A */
- BPF_STMT(BPF_LD | BPF_B | BPF_ABS, 3),
- /* left-shift it by 8 */
- BPF_STMT(BPF_ALU | BPF_LSH | BPF_K, 8),
- /* or with X */
- BPF_STMT(BPF_ALU | BPF_OR | BPF_X, 0),
- /* put result into X */
- BPF_STMT(BPF_MISC| BPF_TAX, 0),
-
- /*
- * Allow management frames through, this also gives us those
- * management frames that we sent ourselves with status
- */
- /* load the lower byte of the IEEE 802.11 frame control field */
- BPF_STMT(BPF_LD | BPF_B | BPF_IND, 0),
- /* mask off frame type and version */
- BPF_STMT(BPF_ALU | BPF_AND | BPF_K, 0xF),
- /* accept frame if it's both 0, fall through otherwise */
- BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, 0, PASS, 0),
-
- /*
- * TODO: add a bit to radiotap RX flags that indicates
- * that the sending station is not associated, then
- * add a filter here that filters on our DA and that flag
- * to allow us to deauth frames to that bad station.
- *
- * For now allow all To DS data frames through.
- */
- /* load the IEEE 802.11 frame control field */
- BPF_STMT(BPF_LD | BPF_H | BPF_IND, 0),
- /* mask off frame type, version and DS status */
- BPF_STMT(BPF_ALU | BPF_AND | BPF_K, 0x0F03),
- /* accept frame if version 0, type 2 and To DS, fall through otherwise
- */
- BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, 0x0801, PASS, 0),
-
-#if 0
- /*
- * drop non-data frames
- */
- /* load the lower byte of the frame control field */
- BPF_STMT(BPF_LD | BPF_B | BPF_IND, 0),
- /* mask off QoS bit */
- BPF_STMT(BPF_ALU | BPF_AND | BPF_K, 0x0c),
- /* drop non-data frames */
- BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, 8, 0, FAIL),
-#endif
- /* load the upper byte of the frame control field */
- BPF_STMT(BPF_LD | BPF_B | BPF_IND, 1),
- /* mask off toDS/fromDS */
- BPF_STMT(BPF_ALU | BPF_AND | BPF_K, 0x03),
- /* accept WDS frames */
- BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, 3, PASS, 0),
-
- /*
- * add header length to index
- */
- /* load the lower byte of the frame control field */
- BPF_STMT(BPF_LD | BPF_B | BPF_IND, 0),
- /* mask off QoS bit */
- BPF_STMT(BPF_ALU | BPF_AND | BPF_K, 0x80),
- /* right shift it by 6 to give 0 or 2 */
- BPF_STMT(BPF_ALU | BPF_RSH | BPF_K, 6),
- /* add data frame header length */
- BPF_STMT(BPF_ALU | BPF_ADD | BPF_K, 24),
- /* add index, was start of 802.11 header */
- BPF_STMT(BPF_ALU | BPF_ADD | BPF_X, 0),
- /* move to index, now start of LL header */
- BPF_STMT(BPF_MISC | BPF_TAX, 0),
-
- /*
- * Accept empty data frames, we use those for
- * polling activity.
- */
- BPF_STMT(BPF_LD | BPF_W | BPF_LEN, 0),
- BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_X, 0, PASS, 0),
-
- /*
- * Accept EAPOL frames
- */
- BPF_STMT(BPF_LD | BPF_W | BPF_IND, 0),
- BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, 0xAAAA0300, 0, FAIL),
- BPF_STMT(BPF_LD | BPF_W | BPF_IND, 4),
- BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, 0x0000888E, PASS, FAIL),
-
- /* keep these last two statements or change the code below */
- /* return 0 == "DROP" */
+ /* return 0 == "DROP", we don't want RX */
BPF_STMT(BPF_RET | BPF_K, 0),
- /* return ~0 == "keep all" */
- BPF_STMT(BPF_RET | BPF_K, ~0),
};
-static struct sock_fprog msock_filter = {
+static const struct sock_fprog msock_filter = {
.len = ARRAY_SIZE(msock_filter_insns),
.filter = msock_filter_insns,
};
static int add_monitor_filter(int s)
{
- int idx;
-
- /* rewrite all PASS/FAIL jump offsets */
- for (idx = 0; idx < msock_filter.len; idx++) {
- struct sock_filter *insn = &msock_filter_insns[idx];
-
- if (BPF_CLASS(insn->code) == BPF_JMP) {
- if (insn->code == (BPF_JMP|BPF_JA)) {
- if (insn->k == PASS)
- insn->k = msock_filter.len - idx - 2;
- else if (insn->k == FAIL)
- insn->k = msock_filter.len - idx - 3;
- }
-
- if (insn->jt == PASS)
- insn->jt = msock_filter.len - idx - 2;
- else if (insn->jt == FAIL)
- insn->jt = msock_filter.len - idx - 3;
-
- if (insn->jf == PASS)
- insn->jf = msock_filter.len - idx - 2;
- else if (insn->jf == FAIL)
- insn->jf = msock_filter.len - idx - 3;
- }
- }
-
if (setsockopt(s, SOL_SOCKET, SO_ATTACH_FILTER,
&msock_filter, sizeof(msock_filter))) {
wpa_printf(MSG_ERROR, "nl80211: setsockopt(SO_ATTACH_FILTER) failed: %s",
}
-void nl80211_remove_monitor_interface(struct wpa_driver_nl80211_data *drv)
+static void
+nl80211_remove_monitor_interface(struct wpa_driver_nl80211_data *drv,
+ int ifidx, int sock)
{
- if (drv->monitor_refcount > 0)
- drv->monitor_refcount--;
- wpa_printf(MSG_DEBUG, "nl80211: Remove monitor interface: refcount=%d",
- drv->monitor_refcount);
- if (drv->monitor_refcount > 0)
- return;
-
- if (drv->monitor_ifidx >= 0) {
- nl80211_remove_iface(drv, drv->monitor_ifidx);
- drv->monitor_ifidx = -1;
- }
- if (drv->monitor_sock >= 0) {
- eloop_unregister_read_sock(drv->monitor_sock);
- close(drv->monitor_sock);
- drv->monitor_sock = -1;
- }
+ wpa_printf(MSG_DEBUG, "nl80211: Remove monitor interface");
+
+ if (ifidx >= 0)
+ nl80211_remove_iface(drv, ifidx);
+ if (sock >= 0)
+ close(sock);
}
-int nl80211_create_monitor_interface(struct wpa_driver_nl80211_data *drv)
+static int nl80211_create_monitor_interface(struct wpa_driver_nl80211_data *drv,
+ int *ifidx, int *sock)
{
char buf[IFNAMSIZ];
struct sockaddr_ll ll;
int optval;
socklen_t optlen;
- if (drv->monitor_ifidx >= 0) {
- drv->monitor_refcount++;
- wpa_printf(MSG_DEBUG, "nl80211: Re-use existing monitor interface: refcount=%d",
- drv->monitor_refcount);
- return 0;
- }
+ *ifidx = -1;
+ *sock = -1;
if (os_strncmp(drv->first_bss->ifname, "p2p-", 4) == 0) {
/*
buf[IFNAMSIZ - 1] = '\0';
- drv->monitor_ifidx =
- nl80211_create_iface(drv, buf, NL80211_IFTYPE_MONITOR, NULL,
- 0, NULL, NULL, 0);
+ *ifidx = nl80211_create_iface(drv, buf, NL80211_IFTYPE_MONITOR, NULL,
+ 0, NULL, NULL, 0);
- if (drv->monitor_ifidx == -EOPNOTSUPP) {
- /*
- * This is backward compatibility for a few versions of
- * the kernel only that didn't advertise the right
- * attributes for the only driver that then supported
- * AP mode w/o monitor -- ath6kl.
- */
- wpa_printf(MSG_DEBUG, "nl80211: Driver does not support "
- "monitor interface type - try to run without it");
- drv->device_ap_sme = 1;
- }
-
- if (drv->monitor_ifidx < 0)
+ if (*ifidx < 0)
return -1;
if (linux_set_iface_flags(drv->global->ioctl_sock, buf, 1))
memset(&ll, 0, sizeof(ll));
ll.sll_family = AF_PACKET;
- ll.sll_ifindex = drv->monitor_ifidx;
- drv->monitor_sock = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
- if (drv->monitor_sock < 0) {
+ ll.sll_ifindex = *ifidx;
+ *sock = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
+ if (*sock < 0) {
wpa_printf(MSG_ERROR, "nl80211: socket[PF_PACKET,SOCK_RAW] failed: %s",
strerror(errno));
goto error;
}
- if (add_monitor_filter(drv->monitor_sock)) {
+ if (add_monitor_filter(*sock)) {
wpa_printf(MSG_INFO, "Failed to set socket filter for monitor "
"interface; do filtering in user space");
/* This works, but will cost in performance. */
}
- if (bind(drv->monitor_sock, (struct sockaddr *) &ll, sizeof(ll)) < 0) {
+ if (bind(*sock, (struct sockaddr *) &ll, sizeof(ll)) < 0) {
wpa_printf(MSG_ERROR, "nl80211: monitor socket bind failed: %s",
strerror(errno));
goto error;
optlen = sizeof(optval);
optval = 20;
- if (setsockopt
- (drv->monitor_sock, SOL_SOCKET, SO_PRIORITY, &optval, optlen)) {
+ if (setsockopt(*sock, SOL_SOCKET, SO_PRIORITY, &optval, optlen)) {
wpa_printf(MSG_ERROR, "nl80211: Failed to set socket priority: %s",
strerror(errno));
goto error;
}
- if (eloop_register_read_sock(drv->monitor_sock, handle_monitor_read,
- drv, NULL)) {
- wpa_printf(MSG_INFO, "nl80211: Could not register monitor read socket");
- goto error;
- }
-
- drv->monitor_refcount++;
return 0;
error:
- nl80211_remove_monitor_interface(drv);
+ nl80211_remove_monitor_interface(drv, *ifidx, *sock);
return -1;
}
-int nl80211_send_monitor(struct wpa_driver_nl80211_data *drv,
- const void *data, size_t len,
- int encrypt, int noack)
+static int _nl80211_send_monitor(int monitor_sock,
+ const void *data, size_t len,
+ int encrypt, int noack)
{
__u8 rtap_hdr[] = {
0x00, 0x00, /* radiotap version */
if (encrypt)
rtap_hdr[8] |= IEEE80211_RADIOTAP_F_WEP;
- if (drv->monitor_sock < 0) {
- wpa_printf(MSG_DEBUG, "nl80211: No monitor socket available "
- "for %s", __func__);
- return -1;
- }
-
if (noack)
txflags |= IEEE80211_RADIOTAP_F_TX_NOACK;
WPA_PUT_LE16(&rtap_hdr[12], txflags);
- res = sendmsg(drv->monitor_sock, &msg, 0);
+ res = sendmsg(monitor_sock, &msg, 0);
if (res < 0) {
wpa_printf(MSG_INFO, "nl80211: sendmsg: %s", strerror(errno));
return -1;
}
return 0;
}
+
+
+int nl80211_send_monitor(struct wpa_driver_nl80211_data *drv,
+ const void *data, size_t len,
+ int encrypt, int noack)
+{
+ int res, ifidx, sock;
+
+ res = nl80211_create_monitor_interface(drv, &ifidx, &sock);
+ if (res < 0)
+ return res;
+
+ res = _nl80211_send_monitor(sock, data, len, encrypt, noack);
+ nl80211_remove_monitor_interface(drv, ifidx, sock);
+ return res;
+}
+
+#endif /* CONFIG_TESTING_OPTIONS */
projects / thirdparty / hostap.git / commitdiff
