+++ /dev/null
-#-----------------------------------------------------------------------------
-# Copyright (c) 1994 Regents of the University of Michigan.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms are permitted
-# provided that this notice is preserved and that due credit is given
-# to the University of Michigan at Ann Arbor. The name of the University
-# may not be used to endorse or promote products derived from this
-# software without specific prior written permission. This software
-# is provided ``as is'' without express or implied warranty.
-#
-# LDAP common Make defines (included in all but top-level Makefile)
-#
-#-----------------------------------------------------------------------------
-
-#############################################################################
-## Edit the following variables to have appropriate values for your system ##
-#############################################################################
-
-#############################################################################
-## LDAP install paths ##
-#############################################################################
-#
-# by default, everything is installed below INSTROOT
-# servers, config files, etc. are put in ETCDIR
-# include files get put in INCLUDEDIR
-# libraries are put in LIBDIR
-# man pages are put under MANDIR
-# programs end-users will run are put in BINDIR
-#
-INSTROOT=/usr/local
-ETCDIR= $(INSTROOT)/etc
-INCLUDEDIR= $(INSTROOT)/include
-LIBDIR= $(INSTROOT)/lib
-MANDIR= $(INSTROOT)/man
-BINDIR= $(INSTROOT)/bin
-#
-# if you want things to run in a different directory from where they
-# are installed, set this accordingly (this path gets compiled into a
-# few binaries). otherwise, leave it alone.
-RUNTIMEETCDIR= $(ETCDIR)
-
-#############################################################################
-## General compiler options ##
-#############################################################################
-# Passed to every compile (cc or gcc). This is where you put -O or -g, etc.
-EXTRACFLAGS=-g
-# Passed to every link (ld). Include -g here if you did in EXTRACFLAGS.
-EXTRALDFLAGS=-g
-
-#############################################################################
-## If you are NOT using Kerberos authentication, you can skip this section.##
-#############################################################################
-#
-# Otherwise, to enable kerberos authentication, uncomment KERBEROS (and
-# AFSKERBEROS if you are running the AFS version of kerberos). Also
-# uncomment and change the various KRB* lines to point to where the
-# kerberos libraries and include files are installed at your site.
-#
-KERBEROS=-DKERBEROS
-AFSKERBEROS=-DAFSKERBEROS
-KRBINCLUDEFLAG = -I/usr/local/kerberos/include
-KRBLIBFLAG = -L/usr/local/kerberos/lib
-KRBLIBS = -lkrb -ldes
-
-#############################################################################
-## ISODE is required ONLY to build the ldap <-> X.500 server (ldapd) ##
-## If you don't want to build it, you can skip this section. ##
-#############################################################################
-#
-# To build the ldap server, uncomment the HAVEISODE line,
-# and the section describing build settings for your version of isode.
-#
-HAVEISODE = yes
-# If you compiled ISODE with TURBO_DISK defined, uncomment this
-#ISODETURBOLIBS = -lgdbm
-# uncomment these to have ldapd "pretty print" protocol elements w/debugging
-PEPSY_DUMP=-DPEPSY_DUMP
-PEPSY=/usr/local/ic/bin/pepsy
-# uncommment this line to have ldapd load PP syntax handlers
-# you'll also need to add -lpp to ISODEBASELIBS below
-#LDAP_USE_PP=-DLDAP_USE_PP
-# uncomment NO_SETPROCTITLE to have ldapd NOT change its title
-#NO_SETPROCTITLE=-DNOSETPROCTITLE
-#
-# ISODE Consortium release build settings
-# You should change the next line so that ICRELEASE matches the (integer)
-# version number of whatever IC release you have, e.g. 1, 2, or 3 and
-# also uncomment the next 5 lines.
-ICRELEASE=-DICRELEASE=2
-ISODEPACKAGE=-DISODEPACKAGE=IC
-ISODEINCLUDEFLAG= -I/usr/local/ic/include
-ISODELIBFLAG = -L/usr/local/ic/lib
-ISODEBASELIBS = -lisode
-#
-# Freely available ISODE 8.0 release build settings (uncomment the next 4 lines)
-#ISODEPACKAGE=-DISODEPACKAGE
-#ISODEINCLUDEFLAG= -I/usr/local/isode/include
-#ISODELIBFLAG = -L/usr/local/isode/lib
-#ISODEBASELIBS = -ldsap -lisode
-#
-# NEXOR ISODE release build settings (uncomment the next 4 lines)
-#ISODEPACKAGE=-DISODEPACKAGE=XT
-#ISODEINCLUDEFLAG= -I/usr/include/isode
-#ISODELIBFLAG = -L/usr/local/lib -L/usr/sunlink/osi/lib
-#ISODEBASELIBS = -lxtpp -lresolv -lxtdsap -lxtisode -losi
-
-#############################################################################
-## If you don't want to run slapd, skip this section. ##
-#############################################################################
-#
-# To build slapd (the stand-alone ldap daemon), uncomment the MAKESLAPD
-# line and select the SLAPD_BACKENDS you want to use. If you enable the
-# LDBM backend, also select one of the LDBM backends.
-MAKESLAPD= yes
-#
-# remove the defines for backends you don't want to enable
-SLAPD_BACKENDS= -DLDAP_LDBM -DLDAP_SHELL -DLDAP_PASSWD
-#
-# If you have included -DLDAP_LDBM in the SLAPD_BACKENDS line you need
-# to specify which low-level database package to use. There are
-# four choices: Berkeley db b-tree, Berkeley db hash, GNU dbm, or ndbm.
-#
-# berkeley db btree package
-LDBMBACKEND=-DLDBM_USE_DBBTREE
-LDBMINCLUDE=-I/usr/local/include
-LDBMLIB=-ldb
-# berkeley db hash package
-#LDBMBACKEND=-DLDBM_USE_DBHASH
-#LDBMINCLUDE=-I/usr/local/include
-#LDBMLIB=-ldb
-# gnu dbm (gdbm)
-#LDBMBACKEND=-DLDBM_USE_GDBM
-#LDBMINCLUDE=-I/usr/local/include
-#LDBMLIB=-lgdbm
-# standard unix ndbm
-#LDBMBACKEND=-DLDBM_USE_NDBM
-#
-# if you want to use a non-default threads package change these lines
-#THREADS=-DNO_THREADS
-#THREADSLIB=
-
-#############################################################################
-## The following options are used by the xax500 client. If you haven't ##
-## retrieved the xax500 source and dropped it into the "clients" ##
-## directory, you can skip this section. ##
-#############################################################################
-#
-# location of your X include files
-#XINCLUDES= -I/usr/local/X11/include
-#
-# location of your X libraries
-#XLIBDIRS=-L/usr/local/X11/lib
-#
-# include any extra X libraries you need here
-# the following works with sunos 4 and X11R5
-#XLIBS = $(XLIBDIRS) -lXm -lXt -lX11
-# the following has been known to work with Solaris 2.4 and X11R6
-#XLIBS = $(XLIBDIRS) -lXm -lXext -lSM -lICE -lXpm -lXt -lX11
-
-#############################################################################
-## If you don't want to do auto-translation of character sets, skip this ##
-#############################################################################
-#
-# Otherwise, uncomment this line and set the following options.
-#STR_TRANSLATION=-DSTR_TRANSLATION
-#
-# remove the defines for LDAP client library T.61 character translation
-# you do not need. If you use LDAP_CHARSET_8859, replace the '1' in "88591"
-# with the number of the particular character set you use. E.g., use "88594"
-# if you use the ISO 8859-4 chracter set.
-#LIBLDAP_CHARSETS=-DLDAP_CHARSET_8859="88591"
-#
-# uncomment one these lines to enable automatic T.61 translation by default
-#LIBLDAP_DEF_CHARSET=-DLDAP_DEFAULT_CHARSET=LDAP_CHARSET_8859
-
-#############################################################################
-## General options ##
-#############################################################################
-# uncomment this line to enable debugging code (a good idea)
-LDAP_DEBUG=-DLDAP_DEBUG
-
-# uncomment this line to turn on a few U of Michigan specific things
-UOFM=-DUOFM
-
-# uncomment this line to delete a few printfs in the lber and ldap libraries.
-#NO_USERINTERFACE=-DNO_USERINTERFACE
-
-# uncomment this line to include Connectionless LDAP support
-CLDAP=-DCLDAP
-
-# uncomment this line to eliminate local caching support in the libldap
-#NO_CACHE=-DNO_CACHE
-
-# uncomment this line to enable support for LDAP referrals in libldap
-LDAP_REFERRALS=-DLDAP_REFERRALS
-
-# uncomment this line to use soundex for approximate matches in slapd.
-# the default is to use the metaphone algorithm.
-#PHONETIC=-DSOUNDEX
+++ /dev/null
-#-----------------------------------------------------------------------------
-# Copyright (c) 1994 Regents of the University of Michigan.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms are permitted
-# provided that this notice is preserved and that due credit is given
-# to the University of Michigan at Ann Arbor. The name of the University
-# may not be used to endorse or promote products derived from this
-# software without specific prior written permission. This software
-# is provided ``as is'' without express or implied warranty.
-#
-# LDAP include file makefile
-#
-#-----------------------------------------------------------------------------
-
-LDAPSRC=..
-
-all: ldapconfig.h FORCE
- @if [ ! -z "$(SYSEXITSPATH)" -a ! -r sysexits.h ]; then \
- echo "$(LN) $(SYSEXITSPATH) sysexits.h"; \
- $(LN) $(SYSEXITSPATH) sysexits.h; \
- else \
- exit 0; \
- fi
-
-ldapconfig.h: ldapconfig.h.edit Makefile
- @$(RM) $@
- @echo "/*" > $@; \
- echo " * This file was automatically generated. Do not edit it." >> $@; \
- echo " * Instead, edit the file ldapconfig.h.edit. See the LDAP" >> $@; \
- echo " * INSTALL file for more information." >> $@; \
- echo " */ " >> $@; \
- echo "" >> $@; \
- $(SED) -e 's;%ETCDIR%;$(RUNTIMEETCDIR);' ldapconfig.h.edit >> $@; \
- $(CHMOD) 444 $@
-
-install: all FORCE
- -$(MKDIR) -p $(INCLUDEDIR)
- $(INSTALL) $(INSTALLFLAGS) -m 644 ldap.h $(INCLUDEDIR)
- $(INSTALL) $(INSTALLFLAGS) -m 644 lber.h $(INCLUDEDIR)
- $(INSTALL) $(INSTALLFLAGS) -m 644 proto-lber.h $(INCLUDEDIR)
- $(INSTALL) $(INSTALLFLAGS) -m 644 proto-ldap.h $(INCLUDEDIR)
- $(INSTALL) $(INSTALLFLAGS) -m 644 disptmpl.h $(INCLUDEDIR)
- $(INSTALL) $(INSTALLFLAGS) -m 644 srchpref.h $(INCLUDEDIR)
-
-depend: FORCE
-
-clean: FORCE
-
-veryclean: clean
- $(RM) ldapconfig.h
- @if [ ! -z "$(SYSEXITSPATH)" ]; then \
- echo "$(RM) sysexits.h"; \
- $(RM) sysexits.h; \
- else \
- exit 0; \
- fi
-
-links:
- @echo "making links in `$(PWD)`
- @$(LN) .src/*.h .
- @cp .src/ldapconfig.h.edit .
- @-$(RM) ldapconfig.h
+++ /dev/null
-/*
- * Copyright (c) 1994 Regents of the University of Michigan.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that this notice is preserved and that due credit is given
- * to the University of Michigan at Ann Arbor. The name of the University
- * may not be used to endorse or promote products derived from this
- * software without specific prior written permission. This software
- * is provided ``as is'' without express or implied warranty.
- */
-
-#ifndef _CONFIG_H
-#define _CONFIG_H
-
-/*
- * config.h for LDAP -- edit this file to customize LDAP client behavior.
- * NO platform-specific definitions should be placed in this file.
- * Note that this is NOT used by the LDAP or LBER libraries.
- */
-
-/*
- * SHARED DEFINITIONS - things you should change
- */
- /* default ldap host */
-#define LDAPHOST "localhost"
- /* default place to start searching */
-#define DEFAULT_BASE "o=Your Organization Name, c=US"
-
-/*********************************************************************
- * *
- * You probably do not need to edit anything below this point *
- * *
- *********************************************************************/
-
-/*
- * SHARED DEFINITIONS - other things you can change
- */
- /* default attribute to use when sorting entries, NULL => sort by DN */
-#define SORT_ATTR NULL
- /* default count of DN components to show in entry displays */
-#define DEFAULT_RDNCOUNT 2
- /* default config file locations */
-#define FILTERFILE "%ETCDIR%/ldapfilter.conf"
-#define TEMPLATEFILE "%ETCDIR%/ldaptemplates.conf"
-#define SEARCHFILE "%ETCDIR%/ldapsearchprefs.conf"
-#define FRIENDLYFILE "%ETCDIR%/ldapfriendly"
-
-/*
- * FINGER DEFINITIONS
- */
- /* who to bind as */
-#define FINGER_BINDDN NULL
- /* where to search */
-#define FINGER_BASE DEFAULT_BASE
- /* banner to print */
-#define FINGER_BANNER "X.500 Finger Service...\r\n"
- /* who to report errors to */
-#define FINGER_ERRORS "your local system administrator"
- /* what to say if no matches are found */
-#define FINGER_NOMATCH "Search failed to find anything.\r\n"
- /* what to say if the service may be unavailable */
-#define FINGER_UNAVAILABLE \
-"The X.500 service may be temporarily unavailable.\r\n\
-Please try again later.\r\n"
- /* printed if a match has no email address - for disptmp default */
-#define FINGER_NOEMAIL1 "None registered in this service."
-#define FINGER_NOEMAIL2 NULL
-#define FINGER_NOEMAIL { FINGER_NOEMAIL1, FINGER_NOEMAIL2, NULL }
- /* maximum number of matches returned */
-#define FINGER_SIZELIMIT 50
- /* max number of hits displayed in full before a list is presented */
-#define FINGER_LISTLIMIT 1
- /* what to exec for "finger @host" */
-#define FINGER_CMD "/usr/ucb/finger"
- /* how to treat aliases when searching */
-#define FINGER_DEREF LDAP_DEREF_FINDING
- /* attribute to use when sorting results */
-#define FINGER_SORT_ATTR SORT_ATTR
- /* enable ufn support */
-#define FINGER_UFN
- /* timeout for searches */
-#define FINGER_TIMEOUT 60
- /* number of DN components to show in entry displays */
-#define FINGER_RDNCOUNT DEFAULT_RDNCOUNT
-
-/*
- * GO500 GOPHER GATEWAY DEFINITIONS
- */
- /* who to bind as */
-#define GO500_BINDDN NULL
- /* where to search */
-#define GO500_BASE DEFAULT_BASE
- /* port on which to listen */
-#define GO500_PORT 5555
- /* how to handle aliases */
-#define GO500_DEREF LDAP_DEREF_FINDING
- /* attribute to use when sorting results */
-#define GO500_SORT_ATTR SORT_ATTR
- /* timeout for searches */
-#define GO500_TIMEOUT 180
- /* enable ufn support */
-#define GO500_UFN
- /*
- * only set and uncomment this if your hostname() does not return
- * a fully qualified hostname
- */
-/* #define GO500_HOSTNAME "fully.qualified.hostname.here" */
- /* number of DN components to show in entry displays */
-#define GO500_RDNCOUNT DEFAULT_RDNCOUNT
-
-/*
- * GO500GW GOPHER GATEWAY DEFINITIONS
- */
- /* who to bind as */
-#define GO500GW_BINDDN NULL
- /* where the helpfile lives */
-#define GO500GW_HELPFILE "%ETCDIR%/go500gw.help"
- /* port on which to listen */
-#define GO500GW_PORT 7777
- /* timeout on all searches */
-#define GO500GW_TIMEOUT 180
- /* enable ufn support */
-#define GO500GW_UFN
- /* attribute to use when sorting results */
-#define GO500GW_SORT_ATTR SORT_ATTR
- /*
- * only set and uncomment this if your hostname() does not return
- * a fully qualified hostname
- */
-/* #define GO500GW_HOSTNAME "fully.qualified.hostname.here" */
- /* number of DN components to show in entry displays */
-#define GO500GW_RDNCOUNT DEFAULT_RDNCOUNT
-
-/*
- * RCPT500 MAIL RESPONDER GATEWAY DEFINITIONS
- */
- /* who to bind as */
-#define RCPT500_BINDDN NULL
- /* where the helpfile lives */
-#define RCPT500_HELPFILE "%ETCDIR%/rcpt500.help"
- /* maximum number of matches returned */
-#define RCPT500_SIZELIMIT 50
- /* address replies will appear to come from */
-#define RCPT500_FROM "\"X.500 Query Program\" <X500-Query>"
- /* command that will accept an RFC822 message text on standard
- input, and send it. sendmail -t does this nicely. */
-#define RCPT500_PIPEMAILCMD "/usr/lib/sendmail -t"
- /* where to search */
-#define RCPT500_BASE DEFAULT_BASE
- /* attribute to use when sorting results */
-#define RCPT500_SORT_ATTR SORT_ATTR
- /* max number of hits displayed in full before a list is presented */
-#define RCPT500_LISTLIMIT 1
- /* enable ufn support */
-#define RCPT500_UFN
- /* number of DN components to show in entry displays */
-#define RCPT500_RDNCOUNT DEFAULT_RDNCOUNT
-
-/*
- * LDAPSEARCH TOOL
- */
- /* who to bind as */
-#define LDAPSEARCH_BINDDN NULL
- /* search base */
-#define LDAPSEARCH_BASE DEFAULT_BASE
-
-/*
- * LDAPMODIFY TOOL
- */
- /* who to bind as */
-#define LDAPMODIFY_BINDDN NULL
- /* search base */
-#define LDAPMODIFY_BASE DEFAULT_BASE
-
-/*
- * LDAPDELETE TOOL
- */
- /* who to bind as */
-#define LDAPDELETE_BINDDN NULL
- /* search base */
-#define LDAPDELETE_BASE DEFAULT_BASE
-
-/*
- * LDAPMODRDN TOOL
- */
- /* who to bind as */
-#define LDAPMODRDN_BINDDN NULL
- /* search base */
-#define LDAPMODRDN_BASE DEFAULT_BASE
-
-/*
- * MAIL500 MAILER DEFINITIONS
- */
- /* who to bind as */
-#define MAIL500_BINDDN NULL
- /* max number of ambiguous matches reported */
-#define MAIL500_MAXAMBIGUOUS 10
- /* max subscribers allowed (size limit when searching for them ) */
-#define MAIL500_MAXGROUPMEMBERS LDAP_NO_LIMIT
- /* timeout for all searches */
-#define MAIL500_TIMEOUT 180
- /* sendmail location - mail500 needs to exec this */
-#define MAIL500_SENDMAIL "/usr/lib/sendmail"
-
-/*
- * UD DEFINITIONS
- */
- /* ud configuration file */
-#define UD_CONFIG_FILE "%ETCDIR%/ud.conf"
- /* default editor */
-#define UD_DEFAULT_EDITOR "/usr/ucb/vi"
- /* default bbasename of user config file */
-#define UD_USER_CONFIG_FILE ".udrc"
- /* default user to bind as */
-#define UD_BINDDN NULL
- /* default password to bind with */
-#define UD_PASSWD NULL
- /* default search base */
-#define UD_BASE DEFAULT_BASE
- /* default base where groups are created */
-#define UD_WHERE_GROUPS_ARE_CREATED ""
- /* default base below which all groups live */
-#define UD_WHERE_ALL_GROUPS_LIVE ""
-
-/*
- * FAX500 DEFINITIONS
- */
- /* what to bind as */
-#define FAX_BINDDN NULL
- /* how long to wait for searches */
-#define FAX_TIMEOUT 180
- /* maximum number of ambiguous matches reported */
-#define FAX_MAXAMBIGUOUS 10
- /* maximum number of members allowed */
-#define FAX_MAXMEMBERS LDAP_NO_LIMIT
- /* program to send mail */
-#define FAX_SENDMAIL "/usr/lib/sendmail"
-
-/*
- * RP500 DEFINITIONS
- */
- /* what to bind as */
-#define RP_BINDDN NULL
- /* prefix to add to non-fully-qualified numbers */
-#define RP_PHONEPREFIX ""
-
-/*
- * SLAPD DEFINITIONS
- */
- /* location of the default slapd config file */
-#define SLAPD_DEFAULT_CONFIGFILE "%ETCDIR%/slapd.conf"
- /* default sizelimit on number of entries from a search */
-#define SLAPD_DEFAULT_SIZELIMIT 500
- /* default timelimit to spend on a search */
-#define SLAPD_DEFAULT_TIMELIMIT 3600
- /* location of the slapd pid file */
-#define SLAPD_PIDFILE "%ETCDIR%/slapd.pid"
- /* location of the slapd args file */
-#define SLAPD_ARGSFILE "%ETCDIR%/slapd.args"
- /* dn of the special "monitor" entry */
-#define SLAPD_MONITOR_DN "cn=monitor"
- /* dn of the special "config" entry */
-#define SLAPD_CONFIG_DN "cn=config"
- /* minimum max ids that a single index entry can map to in ldbm */
-#define SLAPD_LDBM_MIN_MAXIDS 4000
-
-#endif /* _CONFIG_H */
+++ /dev/null
-/*
- * Copyright (c) 1994 Regents of the University of Michigan.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that this notice is preserved and that due credit is given
- * to the University of Michigan at Ann Arbor. The name of the University
- * may not be used to endorse or promote products derived from this
- * software without specific prior written permission. This software
- * is provided ``as is'' without express or implied warranty.
- */
-
-#ifndef _CONFIG_H
-#define _CONFIG_H
-
-/*
- * config.h for LDAP -- edit this file to customize LDAP client behavior.
- * NO platform-specific definitions should be placed in this file.
- * Note that this is NOT used by the LDAP or LBER libraries.
- */
-
-/*
- * SHARED DEFINITIONS - things you should change
- */
- /* default ldap host */
-#define LDAPHOST "ldap.itd.umich.edu"
- /* default place to start searching */
-#define DEFAULT_BASE "o=University of Michigan, c=US"
-
-/*********************************************************************
- * *
- * You probably do not need to edit anything below this point *
- * *
- *********************************************************************/
-
-/*
- * SHARED DEFINITIONS - other things you can change
- */
- /* default attribute to use when sorting entries, NULL => sort by DN */
-#define SORT_ATTR NULL
- /* default count of DN components to show in entry displays */
-#define DEFAULT_RDNCOUNT 2
- /* default config file locations */
-#define FILTERFILE "%ETCDIR%/ldapfilter.conf"
-#define TEMPLATEFILE "%ETCDIR%/ldaptemplates.conf"
-#define SEARCHFILE "%ETCDIR%/ldapsearchprefs.conf"
-#define FRIENDLYFILE "%ETCDIR%/ldapfriendly"
-
-/*
- * FINGER DEFINITIONS
- */
- /* who to bind as */
-#define FINGER_BINDDN "cn=finger, ou=Miscellaneous Servers, o=University of Michigan, c=US"
- /* where to search */
-#define FINGER_BASE DEFAULT_BASE
- /* banner to print */
-#define FINGER_BANNER "X.500 Finger Service...\r\n"
- /* who to report errors to */
-#define FINGER_ERRORS "x500@umich.edu"
- /* what to say if no matches are found */
-#define FINGER_NOMATCH \
-"Search failed to find anything. Currently, this service contains\r\n\
-information only on University of Michigan faculty, staff, and students.\r\n\
-Other likely places to finger are:\r\n\
- um.cc.umich.edu\r\n\
- azure.engin.umich.edu\r\n"
- /* what to say if the service may be unavailable */
-#define FINGER_UNAVAILABLE \
-"The X.500 service may be temporarily unavailable.\r\n\
-Please try again later.\r\n"
- /* printed if a match has no email address - for disptmp default */
-#define FINGER_NOEMAIL1 "None registered in this service. Try fingering at:"
-#define FINGER_NOEMAIL2 "um.cc.umich.edu or azure.engin.umich.edu"
-#define FINGER_NOEMAIL { FINGER_NOEMAIL1, FINGER_NOEMAIL2, NULL }
- /* maximum number of matches returned */
-#define FINGER_SIZELIMIT 50
- /* max number of hits displayed in full before a list is presented */
-#define FINGER_LISTLIMIT 1
- /* what to exec for "finger @host" */
-#define FINGER_CMD "/usr/ucb/finger"
- /* how to treat aliases when searching */
-#define FINGER_DEREF LDAP_DEREF_FINDING
- /* attribute to use when sorting results */
-#define FINGER_SORT_ATTR SORT_ATTR
- /* enable ufn support */
-#define FINGER_UFN
- /* timeout for searches */
-#define FINGER_TIMEOUT 60
- /* number of DN components to show in entry displays */
-#define FINGER_RDNCOUNT DEFAULT_RDNCOUNT
-
-/*
- * GO500 GOPHER GATEWAY DEFINITIONS
- */
- /* who to bind as */
-#define GO500_BINDDN "cn=go500, ou=Miscellaneous Servers, o=University of Michigan, c=US"
- /* where to search */
-#define GO500_BASE DEFAULT_BASE
- /* port on which to listen */
-#define GO500_PORT 5555
- /* how to handle aliases */
-#define GO500_DEREF LDAP_DEREF_FINDING
- /* attribute to use when sorting results */
-#define GO500_SORT_ATTR SORT_ATTR
- /* timeout for searches */
-#define GO500_TIMEOUT 60
- /* enable ufn support */
-#define GO500_UFN
- /*
- * only set and uncomment this if your hostname() does not return
- * a fully qualified hostname
- */
-/* #define GO500_HOSTNAME "fully.qualified.hostname.here" */
- /* number of DN components to show in entry displays */
-#define GO500_RDNCOUNT DEFAULT_RDNCOUNT
-
-/*
- * GO500GW GOPHER GATEWAY DEFINITIONS
- */
- /* who to bind as */
-#define GO500GW_BINDDN "cn=go500gw, ou=Miscellaneous Servers, o=University of Michigan, c=US"
- /* where the helpfile lives */
-#define GO500GW_HELPFILE "%ETCDIR%/go500gw.help"
- /* port on which to listen */
-#define GO500GW_PORT 7777
- /* timeout on all searches */
-#define GO500GW_TIMEOUT 180
- /* enable ufn support */
-#define GO500GW_UFN
- /* attribute to use when sorting results */
-#define GO500GW_SORT_ATTR SORT_ATTR
- /*
- * only set and uncomment this if your hostname() does not return
- * a fully qualified hostname
- */
-/* #define GO500GW_HOSTNAME "fully.qualified.hostname.here" */
- /* number of DN components to show in entry displays */
-#define GO500GW_RDNCOUNT DEFAULT_RDNCOUNT
-
-/*
- * RCPT500 MAIL RESPONDER GATEWAY DEFINITIONS
- */
- /* who to bind as */
-#define RCPT500_BINDDN "cn=Rcpt500, ou=Miscellaneous Servers, o=University of Michigan, c=US"
- /* where the helpfile lives */
-#define RCPT500_HELPFILE "%ETCDIR%/rcpt500.help"
- /* maximum number of matches returned */
-#define RCPT500_SIZELIMIT 50
- /* address replies will appear to come from */
-#define RCPT500_FROM "\"X.500 Query Program\" <X500-Query>"
- /* command that will accept an RFC822 message text on standard
- input, and send it. sendmail -t does this nicely. */
-#define RCPT500_PIPEMAILCMD "/usr/lib/sendmail -t"
- /* where to search */
-#define RCPT500_BASE DEFAULT_BASE
- /* attribute to use when sorting results */
-#define RCPT500_SORT_ATTR SORT_ATTR
- /* max number of hits displayed in full before a list is presented */
-#define RCPT500_LISTLIMIT 3
- /* enable ufn support */
-#define RCPT500_UFN
- /* number of DN components to show in entry displays */
-#define RCPT500_RDNCOUNT DEFAULT_RDNCOUNT
-
-/*
- * LDAPSEARCH TOOL
- */
- /* who to bind as */
-#define LDAPSEARCH_BINDDN "cn=LDAP Search Tool, ou=Miscellaneous Servers, o=University of Michigan, c=US"
- /* search base */
-#define LDAPSEARCH_BASE DEFAULT_BASE
-
-/*
- * LDAPMODIFY TOOL
- */
- /* who to bind as */
-#define LDAPMODIFY_BINDDN "cn=Manager, o=University of Michigan, c=US"
- /* search base */
-#define LDAPMODIFY_BASE DEFAULT_BASE
-
-/*
- * LDAPDELETE TOOL
- */
- /* who to bind as */
-#define LDAPDELETE_BINDDN "cn=Manager, o=University of Michigan, c=US"
- /* search base */
-#define LDAPDELETE_BASE DEFAULT_BASE
-
-/*
- * LDAPMODRDN TOOL
- */
- /* who to bind as */
-#define LDAPMODRDN_BINDDN "cn=Manager, o=University of Michigan, c=US"
- /* search base */
-#define LDAPMODRDN_BASE DEFAULT_BASE
-
-/*
- * MAIL500 MAILER DEFINITIONS
- */
- /* who to bind as */
-#define MAIL500_BINDDN "cn=mail500, ou=Miscellaneous Servers, o=University of Michigan, c=US"
- /* max number of ambiguous matches reported */
-#define MAIL500_MAXAMBIGUOUS 10
- /* max subscribers allowed (size limit when searching for them ) */
-#define MAIL500_MAXGROUPMEMBERS LDAP_NO_LIMIT
- /* timeout for all searches */
-#define MAIL500_TIMEOUT 180
- /* sendmail location - mail500 needs to exec this */
-#define MAIL500_SENDMAIL "/usr/lib/sendmail"
-
-/*
- * UD DEFINITIONS
- */
- /* ud configuration file */
-#define UD_CONFIG_FILE "%ETCDIR%/ud.conf"
- /* default editor */
-#define UD_DEFAULT_EDITOR "/usr/ucb/vi"
- /* default bbasename of user config file */
-#define UD_USER_CONFIG_FILE ".udrc"
- /* default user to bind as */
-#define UD_BINDDN "cn=ud, ou=Miscellaneous Servers, o=University of Michigan, c=US"
- /* default password to bind with */
-#define UD_PASSWD NULL
- /* default search base */
-#define UD_BASE DEFAULT_BASE
- /* default base where groups are created */
-#define UD_WHERE_GROUPS_ARE_CREATED "ou=User Groups, ou=Groups, o=University of Michigan, c=US"
- /* default base below which all groups live */
-#define UD_WHERE_ALL_GROUPS_LIVE "ou=Groups, o=University of Michigan, c=US"
-
-/*
- * FAX500 DEFINITIONS
- */
- /* what to bind as */
-#define FAX_BINDDN "cn=mail500, ou=Miscellaneous Servers, o=University of Michigan, c=US"
- /* how long to wait for searches */
-#define FAX_TIMEOUT 180
- /* maximum number of ambiguous matches reported */
-#define FAX_MAXAMBIGUOUS 10
- /* maximum number of members allowed */
-#define FAX_MAXMEMBERS LDAP_NO_LIMIT
- /* program to send mail */
-#define FAX_SENDMAIL "/usr/lib/sendmail"
-
-/*
- * RP500 DEFINITIONS
- */
- /* what to bind as */
-#define RP_BINDDN "cn=rp500, ou=Miscellaneous Servers, o=University of Michigan, c=US"
- /* prefix to add to non-fully-qualified numbers */
-#define RP_PHONEPREFIX "1313"
-
-/*
- * SLAPD DEFINITIONS
- */
- /* location of the default slapd config file */
-#define SLAPD_DEFAULT_CONFIGFILE "%ETCDIR%/slapd.conf"
- /* default sizelimit on number of entries from a search */
-#define SLAPD_DEFAULT_SIZELIMIT 500
- /* default timelimit to spend on a search */
-#define SLAPD_DEFAULT_TIMELIMIT 3600
- /* location of the slapd pid file */
-#define SLAPD_PIDFILE "%ETCDIR%/slapd.pid"
- /* location of the slapd args file */
-#define SLAPD_ARGSFILE "%ETCDIR%/slapd.args"
- /* dn of the special "monitor" entry */
-#define SLAPD_MONITOR_DN "cn=monitor"
- /* dn of the special "config" entry */
-#define SLAPD_CONFIG_DN "cn=config"
- /* minimum max ids that a single index entry can map to in ldbm */
-#define SLAPD_LDBM_MIN_MAXIDS 4000
-
-#endif /* _CONFIG_H */
projects / thirdparty / openldap.git / commitdiff
