--- /dev/null
+/* SPDX-License-Identifier: MIT */
+/* Copyright (C) B.A.T.M.A.N. contributors:
+ *
+ * Matthias Schiffer
+ */
+
+#ifndef _LINUX_BATMAN_ADV_H_
+#define _LINUX_BATMAN_ADV_H_
+
+#define BATADV_NL_NAME "batadv"
+
+#define BATADV_NL_MCAST_GROUP_CONFIG "config"
+#define BATADV_NL_MCAST_GROUP_TPMETER "tpmeter"
+
+/**
+ * enum batadv_tt_client_flags - TT client specific flags
+ *
+ * Bits from 0 to 7 are called _remote flags_ because they are sent on the wire.
+ * Bits from 8 to 15 are called _local flags_ because they are used for local
+ * computations only.
+ *
+ * Bits from 4 to 7 - a subset of remote flags - are ensured to be in sync with
+ * the other nodes in the network. To achieve this goal these flags are included
+ * in the TT CRC computation.
+ */
+enum batadv_tt_client_flags {
+ /**
+ * @BATADV_TT_CLIENT_DEL: the client has to be deleted from the table
+ */
+ BATADV_TT_CLIENT_DEL = (1 << 0),
+
+ /**
+ * @BATADV_TT_CLIENT_ROAM: the client roamed to/from another node and
+ * the new update telling its new real location has not been
+ * received/sent yet
+ */
+ BATADV_TT_CLIENT_ROAM = (1 << 1),
+
+ /**
+ * @BATADV_TT_CLIENT_WIFI: this client is connected through a wifi
+ * interface. This information is used by the "AP Isolation" feature
+ */
+ BATADV_TT_CLIENT_WIFI = (1 << 4),
+
+ /**
+ * @BATADV_TT_CLIENT_ISOLA: this client is considered "isolated". This
+ * information is used by the Extended Isolation feature
+ */
+ BATADV_TT_CLIENT_ISOLA = (1 << 5),
+
+ /**
+ * @BATADV_TT_CLIENT_NOPURGE: this client should never be removed from
+ * the table
+ */
+ BATADV_TT_CLIENT_NOPURGE = (1 << 8),
+
+ /**
+ * @BATADV_TT_CLIENT_NEW: this client has been added to the local table
+ * but has not been announced yet
+ */
+ BATADV_TT_CLIENT_NEW = (1 << 9),
+
+ /**
+ * @BATADV_TT_CLIENT_PENDING: this client is marked for removal but it
+ * is kept in the table for one more originator interval for consistency
+ * purposes
+ */
+ BATADV_TT_CLIENT_PENDING = (1 << 10),
+
+ /**
+ * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be
+ * part of the network but no node has already announced it
+ */
+ BATADV_TT_CLIENT_TEMP = (1 << 11),
+};
+
+/**
+ * enum batadv_mcast_flags_priv - Private, own multicast flags
+ *
+ * These are internal, multicast related flags. Currently they describe certain
+ * multicast related attributes of the segment this originator bridges into the
+ * mesh.
+ *
+ * Those attributes are used to determine the public multicast flags this
+ * originator is going to announce via TT.
+ *
+ * For netlink, if BATADV_MCAST_FLAGS_BRIDGED is unset then all querier
+ * related flags are undefined.
+ */
+enum batadv_mcast_flags_priv {
+ /**
+ * @BATADV_MCAST_FLAGS_BRIDGED: There is a bridge on top of the mesh
+ * interface.
+ */
+ BATADV_MCAST_FLAGS_BRIDGED = (1 << 0),
+
+ /**
+ * @BATADV_MCAST_FLAGS_QUERIER_IPV4_EXISTS: Whether an IGMP querier
+ * exists in the mesh
+ */
+ BATADV_MCAST_FLAGS_QUERIER_IPV4_EXISTS = (1 << 1),
+
+ /**
+ * @BATADV_MCAST_FLAGS_QUERIER_IPV6_EXISTS: Whether an MLD querier
+ * exists in the mesh
+ */
+ BATADV_MCAST_FLAGS_QUERIER_IPV6_EXISTS = (1 << 2),
+
+ /**
+ * @BATADV_MCAST_FLAGS_QUERIER_IPV4_SHADOWING: If an IGMP querier
+ * exists, whether it is potentially shadowing multicast listeners
+ * (i.e. querier is behind our own bridge segment)
+ */
+ BATADV_MCAST_FLAGS_QUERIER_IPV4_SHADOWING = (1 << 3),
+
+ /**
+ * @BATADV_MCAST_FLAGS_QUERIER_IPV6_SHADOWING: If an MLD querier
+ * exists, whether it is potentially shadowing multicast listeners
+ * (i.e. querier is behind our own bridge segment)
+ */
+ BATADV_MCAST_FLAGS_QUERIER_IPV6_SHADOWING = (1 << 4),
+};
+
+/**
+ * enum batadv_gw_modes - gateway mode of node
+ */
+enum batadv_gw_modes {
+ /** @BATADV_GW_MODE_OFF: gw mode disabled */
+ BATADV_GW_MODE_OFF,
+
+ /** @BATADV_GW_MODE_CLIENT: send DHCP requests to gw servers */
+ BATADV_GW_MODE_CLIENT,
+
+ /** @BATADV_GW_MODE_SERVER: announce itself as gateway server */
+ BATADV_GW_MODE_SERVER,
+};
+
+/**
+ * enum batadv_nl_attrs - batman-adv netlink attributes
+ */
+enum batadv_nl_attrs {
+ /**
+ * @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors
+ */
+ BATADV_ATTR_UNSPEC,
+
+ /**
+ * @BATADV_ATTR_VERSION: batman-adv version string
+ */
+ BATADV_ATTR_VERSION,
+
+ /**
+ * @BATADV_ATTR_ALGO_NAME: name of routing algorithm
+ */
+ BATADV_ATTR_ALGO_NAME,
+
+ /**
+ * @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface
+ */
+ BATADV_ATTR_MESH_IFINDEX,
+
+ /**
+ * @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface
+ */
+ BATADV_ATTR_MESH_IFNAME,
+
+ /**
+ * @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface
+ */
+ BATADV_ATTR_MESH_ADDRESS,
+
+ /**
+ * @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface
+ */
+ BATADV_ATTR_HARD_IFINDEX,
+
+ /**
+ * @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface
+ */
+ BATADV_ATTR_HARD_IFNAME,
+
+ /**
+ * @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv
+ * interface
+ */
+ BATADV_ATTR_HARD_ADDRESS,
+
+ /**
+ * @BATADV_ATTR_ORIG_ADDRESS: originator mac address
+ */
+ BATADV_ATTR_ORIG_ADDRESS,
+
+ /**
+ * @BATADV_ATTR_TPMETER_RESULT: result of run (see
+ * batadv_tp_meter_status)
+ */
+ BATADV_ATTR_TPMETER_RESULT,
+
+ /**
+ * @BATADV_ATTR_TPMETER_TEST_TIME: time (msec) the run took
+ */
+ BATADV_ATTR_TPMETER_TEST_TIME,
+
+ /**
+ * @BATADV_ATTR_TPMETER_BYTES: amount of acked bytes during run
+ */
+ BATADV_ATTR_TPMETER_BYTES,
+
+ /**
+ * @BATADV_ATTR_TPMETER_COOKIE: session cookie to match tp_meter session
+ */
+ BATADV_ATTR_TPMETER_COOKIE,
+
+ /**
+ * @BATADV_ATTR_PAD: attribute used for padding for 64-bit alignment
+ */
+ BATADV_ATTR_PAD,
+
+ /**
+ * @BATADV_ATTR_ACTIVE: Flag indicating if the hard interface is active
+ */
+ BATADV_ATTR_ACTIVE,
+
+ /**
+ * @BATADV_ATTR_TT_ADDRESS: Client MAC address
+ */
+ BATADV_ATTR_TT_ADDRESS,
+
+ /**
+ * @BATADV_ATTR_TT_TTVN: Translation table version
+ */
+ BATADV_ATTR_TT_TTVN,
+
+ /**
+ * @BATADV_ATTR_TT_LAST_TTVN: Previous translation table version
+ */
+ BATADV_ATTR_TT_LAST_TTVN,
+
+ /**
+ * @BATADV_ATTR_TT_CRC32: CRC32 over translation table
+ */
+ BATADV_ATTR_TT_CRC32,
+
+ /**
+ * @BATADV_ATTR_TT_VID: VLAN ID
+ */
+ BATADV_ATTR_TT_VID,
+
+ /**
+ * @BATADV_ATTR_TT_FLAGS: Translation table client flags
+ */
+ BATADV_ATTR_TT_FLAGS,
+
+ /**
+ * @BATADV_ATTR_FLAG_BEST: Flags indicating entry is the best
+ */
+ BATADV_ATTR_FLAG_BEST,
+
+ /**
+ * @BATADV_ATTR_LAST_SEEN_MSECS: Time in milliseconds since last seen
+ */
+ BATADV_ATTR_LAST_SEEN_MSECS,
+
+ /**
+ * @BATADV_ATTR_NEIGH_ADDRESS: Neighbour MAC address
+ */
+ BATADV_ATTR_NEIGH_ADDRESS,
+
+ /**
+ * @BATADV_ATTR_TQ: TQ to neighbour
+ */
+ BATADV_ATTR_TQ,
+
+ /**
+ * @BATADV_ATTR_THROUGHPUT: Estimated throughput to Neighbour
+ */
+ BATADV_ATTR_THROUGHPUT,
+
+ /**
+ * @BATADV_ATTR_BANDWIDTH_UP: Reported uplink bandwidth
+ */
+ BATADV_ATTR_BANDWIDTH_UP,
+
+ /**
+ * @BATADV_ATTR_BANDWIDTH_DOWN: Reported downlink bandwidth
+ */
+ BATADV_ATTR_BANDWIDTH_DOWN,
+
+ /**
+ * @BATADV_ATTR_ROUTER: Gateway router MAC address
+ */
+ BATADV_ATTR_ROUTER,
+
+ /**
+ * @BATADV_ATTR_BLA_OWN: Flag indicating own originator
+ */
+ BATADV_ATTR_BLA_OWN,
+
+ /**
+ * @BATADV_ATTR_BLA_ADDRESS: Bridge loop avoidance claim MAC address
+ */
+ BATADV_ATTR_BLA_ADDRESS,
+
+ /**
+ * @BATADV_ATTR_BLA_VID: BLA VLAN ID
+ */
+ BATADV_ATTR_BLA_VID,
+
+ /**
+ * @BATADV_ATTR_BLA_BACKBONE: BLA gateway originator MAC address
+ */
+ BATADV_ATTR_BLA_BACKBONE,
+
+ /**
+ * @BATADV_ATTR_BLA_CRC: BLA CRC
+ */
+ BATADV_ATTR_BLA_CRC,
+
+ /**
+ * @BATADV_ATTR_DAT_CACHE_IP4ADDRESS: Client IPv4 address
+ */
+ BATADV_ATTR_DAT_CACHE_IP4ADDRESS,
+
+ /**
+ * @BATADV_ATTR_DAT_CACHE_HWADDRESS: Client MAC address
+ */
+ BATADV_ATTR_DAT_CACHE_HWADDRESS,
+
+ /**
+ * @BATADV_ATTR_DAT_CACHE_VID: VLAN ID
+ */
+ BATADV_ATTR_DAT_CACHE_VID,
+
+ /**
+ * @BATADV_ATTR_MCAST_FLAGS: Per originator multicast flags
+ */
+ BATADV_ATTR_MCAST_FLAGS,
+
+ /**
+ * @BATADV_ATTR_MCAST_FLAGS_PRIV: Private, own multicast flags
+ */
+ BATADV_ATTR_MCAST_FLAGS_PRIV,
+
+ /**
+ * @BATADV_ATTR_VLANID: VLAN id on top of soft interface
+ */
+ BATADV_ATTR_VLANID,
+
+ /**
+ * @BATADV_ATTR_AGGREGATED_OGMS_ENABLED: whether the batman protocol
+ * messages of the mesh interface shall be aggregated or not.
+ */
+ BATADV_ATTR_AGGREGATED_OGMS_ENABLED,
+
+ /**
+ * @BATADV_ATTR_AP_ISOLATION_ENABLED: whether the data traffic going
+ * from a wireless client to another wireless client will be silently
+ * dropped.
+ */
+ BATADV_ATTR_AP_ISOLATION_ENABLED,
+
+ /**
+ * @BATADV_ATTR_ISOLATION_MARK: the isolation mark which is used to
+ * classify clients as "isolated" by the Extended Isolation feature.
+ */
+ BATADV_ATTR_ISOLATION_MARK,
+
+ /**
+ * @BATADV_ATTR_ISOLATION_MASK: the isolation (bit)mask which is used to
+ * classify clients as "isolated" by the Extended Isolation feature.
+ */
+ BATADV_ATTR_ISOLATION_MASK,
+
+ /**
+ * @BATADV_ATTR_BONDING_ENABLED: whether the data traffic going through
+ * the mesh will be sent using multiple interfaces at the same time.
+ */
+ BATADV_ATTR_BONDING_ENABLED,
+
+ /**
+ * @BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED: whether the bridge loop
+ * avoidance feature is enabled. This feature detects and avoids loops
+ * between the mesh and devices bridged with the soft interface
+ */
+ BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED,
+
+ /**
+ * @BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED: whether the distributed
+ * arp table feature is enabled. This feature uses a distributed hash
+ * table to answer ARP requests without flooding the request through
+ * the whole mesh.
+ */
+ BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED,
+
+ /**
+ * @BATADV_ATTR_FRAGMENTATION_ENABLED: whether the data traffic going
+ * through the mesh will be fragmented or silently discarded if the
+ * packet size exceeds the outgoing interface MTU.
+ */
+ BATADV_ATTR_FRAGMENTATION_ENABLED,
+
+ /**
+ * @BATADV_ATTR_GW_BANDWIDTH_DOWN: defines the download bandwidth which
+ * is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set
+ * to 'server'.
+ */
+ BATADV_ATTR_GW_BANDWIDTH_DOWN,
+
+ /**
+ * @BATADV_ATTR_GW_BANDWIDTH_UP: defines the upload bandwidth which
+ * is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set
+ * to 'server'.
+ */
+ BATADV_ATTR_GW_BANDWIDTH_UP,
+
+ /**
+ * @BATADV_ATTR_GW_MODE: defines the state of the gateway features.
+ * Possible values are specified in enum batadv_gw_modes
+ */
+ BATADV_ATTR_GW_MODE,
+
+ /**
+ * @BATADV_ATTR_GW_SEL_CLASS: defines the selection criteria this node
+ * will use to choose a gateway if gw_mode was set to 'client'.
+ */
+ BATADV_ATTR_GW_SEL_CLASS,
+
+ /**
+ * @BATADV_ATTR_HOP_PENALTY: defines the penalty which will be applied
+ * to an originator message's tq-field on every hop and/or per
+ * hard interface
+ */
+ BATADV_ATTR_HOP_PENALTY,
+
+ /**
+ * @BATADV_ATTR_LOG_LEVEL: bitmask with to define which debug messages
+ * should be send to the debug log/trace ring buffer
+ */
+ BATADV_ATTR_LOG_LEVEL,
+
+ /**
+ * @BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED: whether multicast
+ * optimizations should be replaced by simple broadcast-like flooding
+ * of multicast packets. If set to non-zero then all nodes in the mesh
+ * are going to use classic flooding for any multicast packet with no
+ * optimizations.
+ */
+ BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED,
+
+ /**
+ * @BATADV_ATTR_NETWORK_CODING_ENABLED: whether Network Coding (using
+ * some magic to send fewer wifi packets but still the same content) is
+ * enabled or not.
+ */
+ BATADV_ATTR_NETWORK_CODING_ENABLED,
+
+ /**
+ * @BATADV_ATTR_ORIG_INTERVAL: defines the interval in milliseconds in
+ * which batman sends its protocol messages.
+ */
+ BATADV_ATTR_ORIG_INTERVAL,
+
+ /**
+ * @BATADV_ATTR_ELP_INTERVAL: defines the interval in milliseconds in
+ * which batman emits probing packets for neighbor sensing (ELP).
+ */
+ BATADV_ATTR_ELP_INTERVAL,
+
+ /**
+ * @BATADV_ATTR_THROUGHPUT_OVERRIDE: defines the throughput value to be
+ * used by B.A.T.M.A.N. V when estimating the link throughput using
+ * this interface. If the value is set to 0 then batman-adv will try to
+ * estimate the throughput by itself.
+ */
+ BATADV_ATTR_THROUGHPUT_OVERRIDE,
+
+ /**
+ * @BATADV_ATTR_MULTICAST_FANOUT: defines the maximum number of packet
+ * copies that may be generated for a multicast-to-unicast conversion.
+ * Once this limit is exceeded distribution will fall back to broadcast.
+ */
+ BATADV_ATTR_MULTICAST_FANOUT,
+
+ /* add attributes above here, update the policy in netlink.c */
+
+ /**
+ * @__BATADV_ATTR_AFTER_LAST: internal use
+ */
+ __BATADV_ATTR_AFTER_LAST,
+
+ /**
+ * @NUM_BATADV_ATTR: total number of batadv_nl_attrs available
+ */
+ NUM_BATADV_ATTR = __BATADV_ATTR_AFTER_LAST,
+
+ /**
+ * @BATADV_ATTR_MAX: highest attribute number currently defined
+ */
+ BATADV_ATTR_MAX = __BATADV_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum batadv_nl_commands - supported batman-adv netlink commands
+ */
+enum batadv_nl_commands {
+ /**
+ * @BATADV_CMD_UNSPEC: unspecified command to catch errors
+ */
+ BATADV_CMD_UNSPEC,
+
+ /**
+ * @BATADV_CMD_GET_MESH: Get attributes from softif/mesh
+ */
+ BATADV_CMD_GET_MESH,
+
+ /**
+ * @BATADV_CMD_GET_MESH_INFO: Alias for @BATADV_CMD_GET_MESH
+ */
+ BATADV_CMD_GET_MESH_INFO = BATADV_CMD_GET_MESH,
+
+ /**
+ * @BATADV_CMD_TP_METER: Start a tp meter session
+ */
+ BATADV_CMD_TP_METER,
+
+ /**
+ * @BATADV_CMD_TP_METER_CANCEL: Cancel a tp meter session
+ */
+ BATADV_CMD_TP_METER_CANCEL,
+
+ /**
+ * @BATADV_CMD_GET_ROUTING_ALGOS: Query the list of routing algorithms.
+ */
+ BATADV_CMD_GET_ROUTING_ALGOS,
+
+ /**
+ * @BATADV_CMD_GET_HARDIF: Get attributes from a hardif of the
+ * current softif
+ */
+ BATADV_CMD_GET_HARDIF,
+
+ /**
+ * @BATADV_CMD_GET_HARDIFS: Alias for @BATADV_CMD_GET_HARDIF
+ */
+ BATADV_CMD_GET_HARDIFS = BATADV_CMD_GET_HARDIF,
+
+ /**
+ * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations
+ */
+ BATADV_CMD_GET_TRANSTABLE_LOCAL,
+
+ /**
+ * @BATADV_CMD_GET_TRANSTABLE_GLOBAL: Query list of global translations
+ */
+ BATADV_CMD_GET_TRANSTABLE_GLOBAL,
+
+ /**
+ * @BATADV_CMD_GET_ORIGINATORS: Query list of originators
+ */
+ BATADV_CMD_GET_ORIGINATORS,
+
+ /**
+ * @BATADV_CMD_GET_NEIGHBORS: Query list of neighbours
+ */
+ BATADV_CMD_GET_NEIGHBORS,
+
+ /**
+ * @BATADV_CMD_GET_GATEWAYS: Query list of gateways
+ */
+ BATADV_CMD_GET_GATEWAYS,
+
+ /**
+ * @BATADV_CMD_GET_BLA_CLAIM: Query list of bridge loop avoidance claims
+ */
+ BATADV_CMD_GET_BLA_CLAIM,
+
+ /**
+ * @BATADV_CMD_GET_BLA_BACKBONE: Query list of bridge loop avoidance
+ * backbones
+ */
+ BATADV_CMD_GET_BLA_BACKBONE,
+
+ /**
+ * @BATADV_CMD_GET_DAT_CACHE: Query list of DAT cache entries
+ */
+ BATADV_CMD_GET_DAT_CACHE,
+
+ /**
+ * @BATADV_CMD_GET_MCAST_FLAGS: Query list of multicast flags
+ */
+ BATADV_CMD_GET_MCAST_FLAGS,
+
+ /**
+ * @BATADV_CMD_SET_MESH: Set attributes for softif/mesh
+ */
+ BATADV_CMD_SET_MESH,
+
+ /**
+ * @BATADV_CMD_SET_HARDIF: Set attributes for hardif of the
+ * current softif
+ */
+ BATADV_CMD_SET_HARDIF,
+
+ /**
+ * @BATADV_CMD_GET_VLAN: Get attributes from a VLAN of the
+ * current softif
+ */
+ BATADV_CMD_GET_VLAN,
+
+ /**
+ * @BATADV_CMD_SET_VLAN: Set attributes for VLAN of the
+ * current softif
+ */
+ BATADV_CMD_SET_VLAN,
+
+ /* add new commands above here */
+
+ /**
+ * @__BATADV_CMD_AFTER_LAST: internal use
+ */
+ __BATADV_CMD_AFTER_LAST,
+
+ /**
+ * @BATADV_CMD_MAX: highest used command number
+ */
+ BATADV_CMD_MAX = __BATADV_CMD_AFTER_LAST - 1
+};
+
+/**
+ * enum batadv_tp_meter_reason - reason of a tp meter test run stop
+ */
+enum batadv_tp_meter_reason {
+ /**
+ * @BATADV_TP_REASON_COMPLETE: sender finished tp run
+ */
+ BATADV_TP_REASON_COMPLETE = 3,
+
+ /**
+ * @BATADV_TP_REASON_CANCEL: sender was stopped during run
+ */
+ BATADV_TP_REASON_CANCEL = 4,
+
+ /* error status >= 128 */
+
+ /**
+ * @BATADV_TP_REASON_DST_UNREACHABLE: receiver could not be reached or
+ * didn't answer
+ */
+ BATADV_TP_REASON_DST_UNREACHABLE = 128,
+
+ /**
+ * @BATADV_TP_REASON_RESEND_LIMIT: (unused) sender retry reached limit
+ */
+ BATADV_TP_REASON_RESEND_LIMIT = 129,
+
+ /**
+ * @BATADV_TP_REASON_ALREADY_ONGOING: test to or from the same node
+ * already ongoing
+ */
+ BATADV_TP_REASON_ALREADY_ONGOING = 130,
+
+ /**
+ * @BATADV_TP_REASON_MEMORY_ERROR: test was stopped due to low memory
+ */
+ BATADV_TP_REASON_MEMORY_ERROR = 131,
+
+ /**
+ * @BATADV_TP_REASON_CANT_SEND: failed to send via outgoing interface
+ */
+ BATADV_TP_REASON_CANT_SEND = 132,
+
+ /**
+ * @BATADV_TP_REASON_TOO_MANY: too many ongoing sessions
+ */
+ BATADV_TP_REASON_TOO_MANY = 133,
+};
+
+/**
+ * enum batadv_ifla_attrs - batman-adv ifla nested attributes
+ */
+enum batadv_ifla_attrs {
+ /**
+ * @IFLA_BATADV_UNSPEC: unspecified attribute which is not parsed by
+ * rtnetlink
+ */
+ IFLA_BATADV_UNSPEC,
+
+ /**
+ * @IFLA_BATADV_ALGO_NAME: routing algorithm (name) which should be
+ * used by the newly registered batadv net_device.
+ */
+ IFLA_BATADV_ALGO_NAME,
+
+ /* add attributes above here, update the policy in soft-interface.c */
+
+ /**
+ * @__IFLA_BATADV_MAX: internal use
+ */
+ __IFLA_BATADV_MAX,
+};
+
+#define IFLA_BATADV_MAX (__IFLA_BATADV_MAX - 1)
+
+#endif /* _LINUX_BATMAN_ADV_H_ */
projects / thirdparty / iproute2.git / commitdiff
