dt-bindings: mmc: mxs-mmc: change ref to mmc-controller-common.yaml from mmc-controll...

Change ref to mmc-controller-common.yaml from mmc-controller.yaml because
imx23/imx28 use dual mode controller (spi and mmc). So default dts node
name use spi instead of mmc. The legacy reason, it use difference
compatible string to distringuish work mode (spi / mmc).

Fix below CHECK_DTB warnings:
arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dtb: spi@80010000 (fsl,imx23-mmc): $nodename:0: 'spi@80010000' does not match '^mmc(@.*)?$'

Additional add clocks property.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250603152245.1068740-1-Frank.Li@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
index 32e512a68ed6195a95845fc497ad1e9079cf5cd5..df07ea3b81d1523e994d343f3b535188aa7051df 100644 (file)
--- a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
@@ -17,7 +17,7 @@ description: |
   and the properties used by the mxsmmc driver.
 
 allOf:
-  - $ref: mmc-controller.yaml
+  - $ref: mmc-controller-common.yaml#
 
 properties:
   compatible:
@@ -31,6 +31,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
   dmas:
     maxItems: 1
 
@@ -41,6 +44,7 @@ required:
   - compatible
   - reg
   - interrupts
+  - clocks
   - dmas
   - dma-names
 
@@ -52,6 +56,7 @@ examples:
         compatible = "fsl,imx28-mmc";
         reg = <0x80010000 2000>;
         interrupts = <96>;
+        clocks = <&clks 46>;
         dmas = <&dma_apbh 0>;
         dma-names = "rx-tx";
         bus-width = <8>;