ARM: dts: Add bus type for parallel ov5640

Add bus type for parallel ov5640 to fix below CHECK_DTBS warnings:
  arch/arm/boot/dts/nxp/imx/imx6q-sabrelite.dtb: camera@42 (ovti,ov5642): port:endpoint:hsync-active: False schema does not allow 1

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
index 8323be1bfb769fda5c21ea9d4790786654e996a8..b2d9e528fcfec55d5467a11ae4308fc92c1d1d50 100644 (file)
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/imx6qdl-clock.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/media/video-interfaces.h>
 
 / {
        chosen {
@@ -372,6 +373,7 @@
                port {
                        ov5642_to_ipu1_csi0_mux: endpoint {
                                remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+                               bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
                                bus-width = <8>;
                                hsync-active = <1>;
                                vsync-active = <1>;

diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
index cc2a7b61a293a0d8919a74a0ea28ae83390dd68b..d1adbb11c51ae078094dbe475b85038c89d243ac 100644 (file)
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/clock/imx6qdl-clock.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/media/video-interfaces.h>
 
 / {
        chosen {
@@ -299,6 +300,7 @@
                port {
                        ov5642_to_ipu1_csi0_mux: endpoint {
                                remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+                               bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
                                bus-width = <8>;
                                hsync-active = <1>;
                                vsync-active = <1>;