ARM: dts: Add a Raidsonic IB-4210-B DTS

This adds a device tree for the Raidsonic IB-4210-B NAS, a slightly
under-powered version of IB-4220-B with half the memory and
the cheaper version of the SoC.

Signed-off-by: Linus Walleij <linusw@kernel.org>

diff --git a/arch/arm/boot/dts/gemini/Makefile b/arch/arm/boot/dts/gemini/Makefile
index d5d32f02e2321e2e7f5e893b50e7122aa6db3d6a..4722fb1bac4954c25cb6dc067538986f30664cac 100644 (file)
--- a/arch/arm/boot/dts/gemini/Makefile
+++ b/arch/arm/boot/dts/gemini/Makefile
@@ -2,6 +2,7 @@
 dtb-$(CONFIG_ARCH_GEMINI) += \
        gemini-dlink-dir-685.dtb \
        gemini-dlink-dns-313.dtb \
+       gemini-nas4210b.dtb \
        gemini-nas4220b.dtb \
        gemini-ns2502.dtb \
        gemini-rut1xx.dtb \

diff --git a/arch/arm/boot/dts/gemini/gemini-nas4210b.dts b/arch/arm/boot/dts/gemini/gemini-nas4210b.dts
new file mode 100644 (file)
index 0000000..8bec57c
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-nas4210b.dts
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for the Gemini-based Raidsonic NAS IB-4210-B
+ * Based on the NAS Forum experiments by user "CptSpock".
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Raidsonic NAS IB-4210-B";
+       compatible = "raidsonic,ib-4210-b", "cortina,gemini";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       memory@0 { /* 64 MB */
+               device_type = "memory";
+               reg = <0x00000000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait";
+               stdout-path = &uart0;
+       };
+
+       gpio_keys {
+               compatible = "gpio-keys";
+
+               button-setup {
+                       debounce-interval = <100>;
+                       wakeup-source;
+                       linux,code = <KEY_SETUP>;
+                       label = "Backup button";
+                       /* Conflict with TVC */
+                       gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+               };
+               button-restart {
+                       debounce-interval = <100>;
+                       wakeup-source;
+                       linux,code = <KEY_RESTART>;
+                       label = "Softreset button";
+                       /* Conflict with TVC */
+                       gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               led-orange-hdd {
+                       label = "nas4220b:orange:hdd";
+                       /* Conflict with TVC */
+                       gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+                       default-state = "on";
+                       linux,default-trigger = "disk-activity";
+               };
+               led-green-os {
+                       label = "nas4220b:green:os";
+                       /* Conflict with TVC */
+                       gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+                       default-state = "on";
+                       linux,default-trigger = "heartbeat";
+               };
+       };
+
+       mdio0: mdio {
+               compatible = "virtual,mdio-gpio";
+               gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+                       <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               /* Realtek RTL8211B */
+               phy0: ethernet-phy@1 {
+                       reg = <1>;
+                       device_type = "ethernet-phy";
+               };
+       };
+
+       soc {
+               flash@30000000 {
+                       status = "okay";
+                       /* 16MB of flash */
+                       reg = <0x30000000 0x01000000>;
+
+                       partitions {
+                               compatible = "redboot-fis";
+                               /* Eraseblock at 0xfe0000 */
+                               fis-index-block = <0x7f>;
+                       };
+               };
+
+               syscon: syscon@40000000 {
+                       pinctrl {
+                               gpio0_default_pins: pinctrl-gpio0 {
+                                       mux {
+                                               function = "gpio0";
+                                               groups =
+                                               "gpio0egrp",
+                                               /* Used by MDIO */
+                                               "gpio0igrp";
+                                       };
+                               };
+                               gpio1_default_pins: pinctrl-gpio1 {
+                                       mux {
+                                               function = "gpio1";
+                                               /* Lines 28-31 used by LEDs and buttons */
+                                               groups = "gpio1dgrp";
+                                       };
+                               };
+                               pinctrl-gmii {
+                                       mux {
+                                               function = "gmii";
+                                               groups = "gmii_gmac0_grp";
+                                       };
+                                       conf0 {
+                                               pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV";
+                                               skew-delay = <0>;
+                                       };
+                                       conf1 {
+                                               pins = "T8 GMAC0 RXC";
+                                               skew-delay = <10>;
+                                       };
+                                       conf2 {
+                                               pins = "T11 GMAC1 RXC";
+                                               skew-delay = <15>;
+                                       };
+                                       conf3 {
+                                               pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN";
+                                               skew-delay = <7>;
+                                       };
+                                       conf4 {
+                                               pins = "V7 GMAC0 TXC", "P10 GMAC1 TXC";
+                                               skew-delay = <10>;
+                                       };
+                                       conf5 {
+                                               /* The data lines all have default skew */
+                                               pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
+                                                      "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
+                                                      "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
+                                                      "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
+                                                      "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
+                                                      "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
+                                               skew-delay = <7>;
+                                       };
+                                       conf6 {
+                                               pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
+                                                      "R7 GMAC0 TXD2", "P7 GMAC0 TXD3";
+                                               skew-delay = <5>;
+                                       };
+                                       /* Set up drive strength on GMAC0 to 16 mA */
+                                       conf7 {
+                                               groups = "gmii_gmac0_grp";
+                                               drive-strength = <16>;
+                                       };
+                               };
+                       };
+               };
+
+               sata: sata@46000000 {
+                       cortina,gemini-ata-muxmode = <0>;
+                       cortina,gemini-enable-sata-bridge;
+                       status = "okay";
+               };
+
+               gpio0: gpio@4d000000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&gpio0_default_pins>;
+               };
+
+               gpio1: gpio@4e000000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&gpio1_default_pins>;
+               };
+
+               ethernet@60000000 {
+                       status = "okay";
+
+                       ethernet-port@0 {
+                               phy-mode = "rgmii";
+                               phy-handle = <&phy0>;
+                       };
+                       ethernet-port@1 {
+                               /* Not used in this platform */
+                       };
+               };
+
+               ide@63000000 {
+                       status = "okay";
+               };
+
+               ide@63400000 {
+                       status = "okay";
+               };
+
+               usb@68000000 {
+                       status = "okay";
+               };
+
+               usb@69000000 {
+                       status = "okay";
+               };
+       };
+};