[efi] Add EFI_BLOCK_IO2_PROTOCOL header and GUID definition

Signed-off-by: Michael Brown <mcb30@ipxe.org>

diff --git a/src/include/ipxe/efi/Protocol/BlockIo2.h b/src/include/ipxe/efi/Protocol/BlockIo2.h
new file mode 100644 (file)
index 0000000..0b9cf8e
--- /dev/null
+++ b/src/include/ipxe/efi/Protocol/BlockIo2.h
@@ -0,0 +1,208 @@
+/** @file
+  Block IO2 protocol as defined in the UEFI 2.3.1 specification.
+
+  The Block IO2 protocol defines an extension to the Block IO protocol which
+  enables the ability to read and write data at a block level in a non-blocking
+  manner.
+
+  Copyright (c) 2011, Intel Corporation. All rights reserved.<BR>
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __BLOCK_IO2_H__
+#define __BLOCK_IO2_H__
+
+FILE_LICENCE ( BSD3 );
+
+#include <ipxe/efi/Protocol/BlockIo.h>
+
+#define EFI_BLOCK_IO2_PROTOCOL_GUID \
+  { \
+    0xa77b2472, 0xe282, 0x4e9f, {0xa2, 0x45, 0xc2, 0xc0, 0xe2, 0x7b, 0xbc, 0xc1} \
+  }
+
+typedef struct _EFI_BLOCK_IO2_PROTOCOL  EFI_BLOCK_IO2_PROTOCOL;
+
+/**
+  The struct of Block IO2 Token.
+**/
+typedef struct {
+
+  ///
+  /// If Event is NULL, then blocking I/O is performed.If Event is not NULL and
+  /// non-blocking I/O is supported, then non-blocking I/O is performed, and
+  /// Event will be signaled when the read request is completed.
+  ///
+  EFI_EVENT               Event;
+
+  ///
+  /// Defines whether or not the signaled event encountered an error.
+  ///
+  EFI_STATUS              TransactionStatus;
+} EFI_BLOCK_IO2_TOKEN;
+
+
+/**
+  Reset the block device hardware.
+
+  @param[in]  This                 Indicates a pointer to the calling context.
+  @param[in]  ExtendedVerification Indicates that the driver may perform a more
+                                   exhausive verification operation of the device
+                                   during reset.
+
+  @retval EFI_SUCCESS          The device was reset.
+  @retval EFI_DEVICE_ERROR     The device is not functioning properly and could
+                               not be reset.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLOCK_RESET_EX) (
+  IN EFI_BLOCK_IO2_PROTOCOL  *This,
+  IN BOOLEAN                 ExtendedVerification
+  );
+
+/**
+  Read BufferSize bytes from Lba into Buffer.
+
+  This function reads the requested number of blocks from the device. All the
+  blocks are read, or an error is returned.
+  If EFI_DEVICE_ERROR, EFI_NO_MEDIA,_or EFI_MEDIA_CHANGED is returned and
+  non-blocking I/O is being used, the Event associated with this request will
+  not be signaled.
+
+  @param[in]       This       Indicates a pointer to the calling context.
+  @param[in]       MediaId    Id of the media, changes every time the media is
+                              replaced.
+  @param[in]       Lba        The starting Logical Block Address to read from.
+  @param[in, out]  Token           A pointer to the token associated with the transaction.
+  @param[in]       BufferSize Size of Buffer, must be a multiple of device block size.
+  @param[out]      Buffer     A pointer to the destination buffer for the data. The
+                              caller is responsible for either having implicit or
+                              explicit ownership of the buffer.
+
+  @retval EFI_SUCCESS           The read request was queued if Token->Event is
+                                not NULL.The data was read correctly from the
+                                device if the Token->Event is NULL.
+  @retval EFI_DEVICE_ERROR      The device reported an error while performing
+                                the read.
+  @retval EFI_NO_MEDIA          There is no media in the device.
+  @retval EFI_MEDIA_CHANGED     The MediaId is not for the current media.
+  @retval EFI_BAD_BUFFER_SIZE   The BufferSize parameter is not a multiple of the
+                                intrinsic block size of the device.
+  @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
+                                or the buffer is not on proper alignment.
+  @retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack
+                                of resources.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLOCK_READ_EX) (
+  IN     EFI_BLOCK_IO2_PROTOCOL *This,
+  IN     UINT32                 MediaId,
+  IN     EFI_LBA                LBA,
+  IN OUT EFI_BLOCK_IO2_TOKEN    *Token,
+  IN     UINTN                  BufferSize,
+     OUT VOID                  *Buffer
+  );
+
+/**
+  Write BufferSize bytes from Lba into Buffer.
+
+  This function writes the requested number of blocks to the device. All blocks
+  are written, or an error is returned.If EFI_DEVICE_ERROR, EFI_NO_MEDIA,
+  EFI_WRITE_PROTECTED or EFI_MEDIA_CHANGED is returned and non-blocking I/O is
+  being used, the Event associated with this request will not be signaled.
+
+  @param[in]       This       Indicates a pointer to the calling context.
+  @param[in]       MediaId    The media ID that the write request is for.
+  @param[in]       Lba        The starting logical block address to be written. The
+                              caller is responsible for writing to only legitimate
+                              locations.
+  @param[in, out]  Token      A pointer to the token associated with the transaction.
+  @param[in]       BufferSize Size of Buffer, must be a multiple of device block size.
+  @param[in]       Buffer     A pointer to the source buffer for the data.
+
+  @retval EFI_SUCCESS           The write request was queued if Event is not NULL.
+                                The data was written correctly to the device if
+                                the Event is NULL.
+  @retval EFI_WRITE_PROTECTED   The device can not be written to.
+  @retval EFI_NO_MEDIA          There is no media in the device.
+  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.
+  @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.
+  @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
+  @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
+                                or the buffer is not on proper alignment.
+  @retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack
+                                of resources.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLOCK_WRITE_EX) (
+  IN     EFI_BLOCK_IO2_PROTOCOL  *This,
+  IN     UINT32                 MediaId,
+  IN     EFI_LBA                LBA,
+  IN OUT EFI_BLOCK_IO2_TOKEN    *Token,
+  IN     UINTN                  BufferSize,
+  IN     VOID                   *Buffer
+  );
+
+/**
+  Flush the Block Device.
+
+  If EFI_DEVICE_ERROR, EFI_NO_MEDIA,_EFI_WRITE_PROTECTED or EFI_MEDIA_CHANGED
+  is returned and non-blocking I/O is being used, the Event associated with
+  this request will not be signaled.
+
+  @param[in]      This     Indicates a pointer to the calling context.
+  @param[in,out]  Token    A pointer to the token associated with the transaction
+
+  @retval EFI_SUCCESS          The flush request was queued if Event is not NULL.
+                               All outstanding data was written correctly to the
+                               device if the Event is NULL.
+  @retval EFI_DEVICE_ERROR     The device reported an error while writting back
+                               the data.
+  @retval EFI_WRITE_PROTECTED  The device cannot be written to.
+  @retval EFI_NO_MEDIA         There is no media in the device.
+  @retval EFI_MEDIA_CHANGED    The MediaId is not for the current media.
+  @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack
+                               of resources.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLOCK_FLUSH_EX) (
+  IN     EFI_BLOCK_IO2_PROTOCOL   *This,
+  IN OUT EFI_BLOCK_IO2_TOKEN      *Token
+  );
+
+///
+///  The Block I/O2 protocol defines an extension to the Block I/O protocol which
+///  enables the ability to read and write data at a block level in a non-blocking
+//   manner.
+///
+struct _EFI_BLOCK_IO2_PROTOCOL {
+  ///
+  /// A pointer to the EFI_BLOCK_IO_MEDIA data for this device.
+  /// Type EFI_BLOCK_IO_MEDIA is defined in BlockIo.h.
+  ///
+  EFI_BLOCK_IO_MEDIA      *Media;
+
+  EFI_BLOCK_RESET_EX      Reset;
+  EFI_BLOCK_READ_EX       ReadBlocksEx;
+  EFI_BLOCK_WRITE_EX      WriteBlocksEx;
+  EFI_BLOCK_FLUSH_EX      FlushBlocksEx;
+};
+
+extern EFI_GUID gEfiBlockIo2ProtocolGuid;
+
+#endif
+

diff --git a/src/include/ipxe/efi/efi.h b/src/include/ipxe/efi/efi.h
index db9943a429d792b02a042c5ab395c55f267f1de5..d341553215f73cc0264f879ec2764abba01a9d3d 100644 (file)
--- a/src/include/ipxe/efi/efi.h
+++ b/src/include/ipxe/efi/efi.h
@@ -158,6 +158,7 @@ extern EFI_GUID efi_apple_net_boot_protocol_guid;
 extern EFI_GUID efi_arp_protocol_guid;
 extern EFI_GUID efi_arp_service_binding_protocol_guid;
 extern EFI_GUID efi_block_io_protocol_guid;
+extern EFI_GUID efi_block_io2_protocol_guid;
 extern EFI_GUID efi_bus_specific_driver_override_protocol_guid;
 extern EFI_GUID efi_component_name_protocol_guid;
 extern EFI_GUID efi_component_name2_protocol_guid;

diff --git a/src/interface/efi/efi_debug.c b/src/interface/efi/efi_debug.c
index 19531fdc1afa707f7442f5ec6bf2ceaf98c444e6..dc9ed85c43c2a5f9717e68e6c10010491aa1d176 100644 (file)
--- a/src/interface/efi/efi_debug.c
+++ b/src/interface/efi/efi_debug.c
@@ -79,6 +79,8 @@ static struct efi_well_known_guid efi_well_known_guids[] = {
          "ArpSb" },
        { &efi_block_io_protocol_guid,
          "BlockIo" },
+       { &efi_block_io2_protocol_guid,
+         "BlockIo2" },
        { &efi_bus_specific_driver_override_protocol_guid,
          "BusSpecificDriverOverride" },
        { &efi_component_name_protocol_guid,

diff --git a/src/interface/efi/efi_guid.c b/src/interface/efi/efi_guid.c
index 62ee5a517c1492a409dfc5b339aea5536653241d..cd81876fc9b7dda35805b1f7f9c95b41a62600e4 100644 (file)
--- a/src/interface/efi/efi_guid.c
+++ b/src/interface/efi/efi_guid.c
@@ -28,6 +28,7 @@ FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
 #include <ipxe/efi/Protocol/AppleNetBoot.h>
 #include <ipxe/efi/Protocol/Arp.h>
 #include <ipxe/efi/Protocol/BlockIo.h>
+#include <ipxe/efi/Protocol/BlockIo2.h>
 #include <ipxe/efi/Protocol/BusSpecificDriverOverride.h>
 #include <ipxe/efi/Protocol/ComponentName.h>
 #include <ipxe/efi/Protocol/ComponentName2.h>
@@ -101,6 +102,10 @@ EFI_GUID efi_arp_service_binding_protocol_guid
 EFI_GUID efi_block_io_protocol_guid
        = EFI_BLOCK_IO_PROTOCOL_GUID;
 
+/** Block I/O version 2 protocol GUID */
+EFI_GUID efi_block_io2_protocol_guid
+       = EFI_BLOCK_IO2_PROTOCOL_GUID;
+
 /** Bus specific driver override protocol GUID */
 EFI_GUID efi_bus_specific_driver_override_protocol_guid
        = EFI_BUS_SPECIFIC_DRIVER_OVERRIDE_PROTOCOL_GUID;