brcmfmac: sdio: Disable auto-tuning around commands expected to fail

commit 2de0b42da263c97d330d276f5ccf7c4470e3324f upstream.

There are certain cases, notably when transitioning between sleep and
active state, when Broadcom SDIO WiFi cards will produce errors on the
SDIO bus.  This is evident from the source code where you can see that
we try commands in a loop until we either get success or we've tried
too many times.  The comment in the code reinforces this by saying
"just one write attempt may fail"

Unfortunately these failures sometimes end up causing an "-EILSEQ"
back to the core which triggers a retuning of the SDIO card and that
blocks all traffic to the card until it's done.

Let's disable retuning around the commands we expect might fail.

Cc: stable@vger.kernel.org #v4.18+
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index cacf05dec4f1e089a92087aba51cb8f79dddbdc7..36ca5e2bd2749112e324cbdba19124014bb4ca0e 100644 (file)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -676,6 +676,8 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 
        brcmf_dbg(TRACE, "Enter: on=%d\n", on);
 
+       sdio_retune_crc_disable(bus->sdiodev->func1);
+
        wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
        /* 1st KSO write goes to AOS wake up core if device is asleep  */
        brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err);
@@ -736,6 +738,8 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
        if (try_cnt > MAX_KSO_ATTEMPTS)
                brcmf_err("max tries: rd_val=0x%x err=%d\n", rd_val, err);
 
+       sdio_retune_crc_enable(bus->sdiodev->func1);
+
        return err;
 }