dt-bindings: i2c: renesas,riic: Document RZ/T2H and RZ/N2H support

Document support for the I2C Bus Interface (RIIC) found on the Renesas
RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs.

The RIIC IP on these parts is similar to that on RZ/V2H(P) but supports
only four interrupts (including a combined error/event), lacks FM+ mode,
and does not require reset. Introduce a new compatible string
`renesas,riic-r9a09g077` for RZ/T2H and use it as a fallback for RZ/N2H.

Unlike earlier SoCs that use eight distinct interrupts, the RZ/T2H uses
only four. Update the binding schema to reflect this interrupt layout
and skip the `resets` property check, as it is not required on these SoCs.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250625104526.101004-3-prabhakar.mahadev-lad.rj@bp.renesas.com

diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
index bfcc400655dcb22241ed0001ee2c38b2912b9241..6876eade431bc20f3b37fc440f0b885808639c08 100644 (file)
--- a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
+++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
@@ -29,32 +29,50 @@ properties:
               - renesas,riic-r9a09g056   # RZ/V2N
           - const: renesas,riic-r9a09g057   # RZ/V2H(P)
 
-      - const: renesas,riic-r9a09g057   # RZ/V2H(P)
+      - enum:
+          - renesas,riic-r9a09g057   # RZ/V2H(P)
+          - renesas,riic-r9a09g077   # RZ/T2H
+
+      - items:
+          - const: renesas,riic-r9a09g087  # RZ/N2H
+          - const: renesas,riic-r9a09g077  # RZ/T2H
 
   reg:
     maxItems: 1
 
   interrupts:
-    items:
-      - description: Transmit End Interrupt
-      - description: Receive Data Full Interrupt
-      - description: Transmit Data Empty Interrupt
-      - description: Stop Condition Detection Interrupt
-      - description: Start Condition Detection Interrupt
-      - description: NACK Reception Interrupt
-      - description: Arbitration-Lost Interrupt
-      - description: Timeout Interrupt
+    oneOf:
+      - items:
+          - description: Transmit End Interrupt
+          - description: Receive Data Full Interrupt
+          - description: Transmit Data Empty Interrupt
+          - description: Stop Condition Detection Interrupt
+          - description: Start Condition Detection Interrupt
+          - description: NACK Reception Interrupt
+          - description: Arbitration-Lost Interrupt
+          - description: Timeout Interrupt
+      - items:
+          - description: Transfer Error Or Event Generation
+          - description: Receive Data Full Interrupt
+          - description: Transmit Data Empty Interrupt
+          - description: Transmit End Interrupt
 
   interrupt-names:
-    items:
-      - const: tei
-      - const: ri
-      - const: ti
-      - const: spi
-      - const: sti
-      - const: naki
-      - const: ali
-      - const: tmoi
+    oneOf:
+      - items:
+          - const: tei
+          - const: ri
+          - const: ti
+          - const: spi
+          - const: sti
+          - const: naki
+          - const: ali
+          - const: tmoi
+      - items:
+          - const: eei
+          - const: rxi
+          - const: txi
+          - const: tei
 
   clock-frequency:
     description:
@@ -84,6 +102,25 @@ required:
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml#
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,riic-r9a09g077
+    then:
+      properties:
+        interrupts:
+          maxItems: 4
+        interrupt-names:
+          maxItems: 4
+        resets: false
+    else:
+      properties:
+        interrupts:
+          minItems: 8
+        interrupt-names:
+          minItems: 8
+
   - if:
       properties:
         compatible: