dt-bindings: usb: richtek,rt1711h: remove deprecated .txt file

Remove the deprecated .txt binding for richtek,rt1711h. It was
superseded by the YAML schema added in commit a72095ed8e65
("dt-bindings usb: typec: rt1711h: Add binding for Richtek RT1711H").

Signed-off-by: Akash Sukhavasi <akash.sukhavasi@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260520170451.2403-1-akash.sukhavasi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
deleted file mode 100644 (file)
index 6f8115d..0000000
--- a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Richtek RT1711H TypeC PD Controller.
-
-Required properties:
- - compatible : Must be "richtek,rt1711h".
- - reg : Must be 0x4e, it's slave address of RT1711H.
- - interrupts : <a b> where a is the interrupt number and b represents an
-   encoding of the sense and level information for the interrupt.
-
-Required sub-node:
-- connector: The "usb-c-connector" attached to the tcpci chip, the bindings
-  of connector node are specified in
-  Documentation/devicetree/bindings/connector/usb-connector.yaml
-
-Example :
-rt1711h@4e {
-       compatible = "richtek,rt1711h";
-       reg = <0x4e>;
-       interrupt-parent = <&gpio26>;
-       interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-       usb_con: connector {
-               compatible = "usb-c-connector";
-               label = "USB-C";
-               data-role = "dual";
-               power-role = "dual";
-               try-power-role = "sink";
-               source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
-               sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
-                            PDO_VAR(5000, 12000, 2000)>;
-               op-sink-microwatt = <10000000>;
-
-               ports {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       port@1 {
-                               reg = <1>;
-                               usb_con_ss: endpoint {
-                                       remote-endpoint = <&usb3_data_ss>;
-                               };
-                       };
-               };
-       };
-};