Configurations/descrip.mms.tmpl: avoid enormous PIPE commands

DCL has a total command line limitation that's too easily broken by
them.

We solve them by creating separate message scripts and using them.

Fixes #13789

Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13834)

diff --git a/Configurations/descrip.mms.tmpl b/Configurations/descrip.mms.tmpl
index 399f34b3eea0a8acc6e28f3d2a42183e8320b93a..04c93222cce4850c3555eedb8347af6a8193df36 100644 (file)
--- a/Configurations/descrip.mms.tmpl
+++ b/Configurations/descrip.mms.tmpl
@@ -377,8 +377,13 @@ NODEBUG=@
         $(NODEBUG) !
         $(NODEBUG) ! Installation logical names
         $(NODEBUG) !
-        $(NODEBUG) installtop = F$PARSE(staging_instdir,"$(INSTALLTOP)","[]A.;",,"SYNTAX_ONLY,NO_CONCEAL") - ".][000000" - "[000000." - "][" - "]A.;" + ".]"
-        $(NODEBUG) datatop = F$PARSE(staging_datadir,"$(OPENSSLDIR)","[]A.;",,"SYNTAX_ONLY,NO_CONCEAL") - ".][000000" - "[000000." - "][" - "]A.;" + ".]"
+        $(NODEBUG) ! This also creates a few DCL variables that are used for
+        $(NODEBUG) ! the "install_msg" target.
+        $(NODEBUG) !
+        $(NODEBUG) installroot = F$PARSE(staging_instdir,"$(INSTALLTOP)","[]A.;",,"SYNTAX_ONLY,NO_CONCEAL") - ".][000000" - "[000000." - "][" - "]A.;"
+        $(NODEBUG) installtop = installroot + ".]"
+        $(NODEBUG) dataroot = F$PARSE(staging_datadir,"$(OPENSSLDIR)","[]A.;",,"SYNTAX_ONLY,NO_CONCEAL") - ".][000000" - "[000000." - "][" - "]A.;"
+        $(NODEBUG) datatop = dataroot + ".]"
         $(NODEBUG) DEFINE ossl_installroot 'installtop'
         $(NODEBUG) DEFINE ossl_dataroot 'datatop'
         $(NODEBUG) !
@@ -455,30 +460,19 @@ list-tests :
         @ WRITE SYS$OUTPUT "Tests are not supported with your chosen Configure options"
         @ ! {- output_on() if !$disabled{tests}; "" -}
 
-install : install_sw install_ssldirs install_docs
+install : install_sw install_ssldirs install_docs install_msg
+        @ !
+
+install_msg :
         @ WRITE SYS$OUTPUT ""
         @ WRITE SYS$OUTPUT "######################################################################"
         @ WRITE SYS$OUTPUT ""
         @ IF "$(DESTDIR)" .EQS. "" THEN -
-             PIPE ( WRITE SYS$OUTPUT "Installation complete" ; -
-                    WRITE SYS$OUTPUT "" ; -
-                    WRITE SYS$OUTPUT "Run @$(SYSTARTUP)openssl_startup{- $osslver -} to set up logical names" ; -
-                    WRITE SYS$OUTPUT "then run @$(SYSTARTUP)openssl_utils{- $osslver -} to define commands" ; -
-                    WRITE SYS$OUTPUT "" )
+             @{- sourcefile("VMS", "msg_install.com") -} "$(SYSTARTUP)" "{- $osslver -}"
         @ IF "$(DESTDIR)" .NES. "" THEN -
-             PIPE ( WRITE SYS$OUTPUT "Staging installation complete" ; -
-                    WRITE SYS$OUTPUT "" ; -
-                    WRITE SYS$OUTPUT "Finish or package in such a way that the contents of the directory tree" ; -
-                    WRITE SYS$OUTPUT staging_instdir ; -
-                    WRITE SYS$OUTPUT "ends up in $(INSTALLTOP)," ; -
-                    WRITE SYS$OUTPUT "and that the contents of the contents of the directory tree" ; -
-                    WRITE SYS$OUTPUT staging_datadir ; -
-                    WRITE SYS$OUTPUT "ends up in $(OPENSSLDIR)" ; -
-                    WRITE SYS$OUTPUT "" ; -
-                    WRITE SYS$OUTPUT "When in its final destination," ; -
-                    WRITE SYS$OUTPUT "Run @$(SYSTARTUP)openssl_startup{- $osslver -} to set up logical names" ; -
-                    WRITE SYS$OUTPUT "then run @$(SYSTARTUP)openssl_utils{- $osslver -} to define commands" ; -
-                    WRITE SYS$OUTPUT "" )
+             @{- sourcefile("VMS", "msg_staging.com") -} -
+             "''installroot']" "''dataroot']" "$(INSTALLTOP)" "$(OPENSSLDIR)" -
+             "$(SYSTARTUP)" "{- $osslver -}"
 
 check_install :
         spawn/nolog @ossl_installroot:[SYSTEST]openssl_ivp{- $osslver -}.com

diff --git a/VMS/msg_install.com b/VMS/msg_install.com
new file mode 100644 (file)
index 0000000..d1eec7c
--- /dev/null
+++ b/VMS/msg_install.com
@@ -0,0 +1,19 @@
+$       ! Used by the main descrip.mms to print the installation complete
+$       ! message.
+$       ! Arguments:
+$       ! P1    startup / setup / shutdown scripts directory
+$       ! P2    distinguishing version number ("major version")
+$
+$       systartup = p1
+$       osslver = p2
+$
+$       WRITE SYS$OUTPUT "Installation complete"
+$       WRITE SYS$OUTPUT ""
+$       WRITE SYS$OUTPUT "The following commands need to be executed to enable you to use OpenSSL:"
+$       WRITE SYS$OUTPUT ""
+$       WRITE SYS$OUTPUT "- to set up OpenSSL logical names:"
+$       WRITE SYS$OUTPUT "  @''systartup'openssl_startup''osslver'"
+$       WRITE SYS$OUTPUT ""
+$       WRITE SYS$OUTPUT "- to define the OpenSSL command"
+$       WRITE SYS$OUTPUT "  @''systartup'openssl_utils''osslver'"
+$       WRITE SYS$OUTPUT ""

diff --git a/VMS/msg_staging.com b/VMS/msg_staging.com
new file mode 100644 (file)
index 0000000..11cd808
--- /dev/null
+++ b/VMS/msg_staging.com
@@ -0,0 +1,37 @@
+$       ! Used by the main descrip.mms to print the statging installation
+$       ! complete
+$       ! message.
+$       ! Arguments:
+$       ! P1    staging software installation directory
+$       ! P2    staging data installation directory
+$       ! P3    final software installation directory
+$       ! P4    final data installation directory
+$       ! P5    startup / setup / shutdown scripts directory
+$       ! P6    distinguishing version number ("major version")
+$
+$       staging_instdir = p1
+$       staging_datadir = p2
+$       final_instdir = p3
+$       final_datadir = p4
+$       systartup = p5
+$       osslver = p6
+$
+$       WRITE SYS$OUTPUT "Staging installation complete"
+$       WRITE SYS$OUTPUT ""
+$       WRITE SYS$OUTPUT "Finish or package in such a way that the contents of the following directory"
+$       WRITE SYS$OUTPUT "trees end up being copied:"
+$       WRITE SYS$OUTPUT ""
+$       WRITE SYS$OUTPUT "- from ", staging_instdir
+$       WRITE SYS$OUTPUT "  to   ", final_instdir
+$       WRITE SYS$OUTPUT "- from ", staging_datadir
+$       WRITE SYS$OUTPUT "  to   ", final_datadir
+$       WRITE SYS$OUTPUT ""
+$       WRITE SYS$OUTPUT "When in its final destination, the following commands need to be executed"
+$       WRITE SYS$OUTPUT "to use OpenSSL:"
+$       WRITE SYS$OUTPUT ""
+$       WRITE SYS$OUTPUT "- to set up OpenSSL logical names:"
+$       WRITE SYS$OUTPUT "  @''systartup'openssl_startup''osslver'"
+$       WRITE SYS$OUTPUT ""
+$       WRITE SYS$OUTPUT "- to define the OpenSSL command"
+$       WRITE SYS$OUTPUT "  @''systartup'openssl_utils''osslver'"
+$       WRITE SYS$OUTPUT ""