dt-bindings: net: bluetooth: nxp: add support for supply and reset

Add support for chip power supply and chip reset/powerdown.

Signed-off-by: Catalin Popescu <catalin.popescu@leica-geosystems.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
index bb9ab5dd3b4afe981968c8b01430ee769ce6bf0e..857c6234ba9be27a2ddf2e99ecdd5706ca4e7481 100644 (file)
--- a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
+++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
@@ -72,6 +72,14 @@ properties:
     description:
       The GPIO number of the NXP chipset used for BT_WAKE_OUT.
 
+  vcc-supply:
+    description:
+      phandle of the regulator that provides the supply voltage.
+
+  reset-gpios:
+    description:
+      Chip powerdown/reset signal (PDn).
+
 required:
   - compatible
 
@@ -90,6 +98,8 @@ examples:
             device-wakeup-gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
             nxp,wakein-pin = /bits/ 8 <18>;
             nxp,wakeout-pin = /bits/ 8 <19>;
+            vcc-supply = <&nxp_iw612_supply>;
+            reset-gpios = <&gpioctrl 2 GPIO_ACTIVE_LOW>;
             local-bd-address = [66 55 44 33 22 11];
             interrupt-parent = <&gpio>;
             interrupts = <8 IRQ_TYPE_EDGE_FALLING>;