arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node

This board has one Type-C port which has USB3 capability. This will
add typec nodes and enable usb3 node.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
index 8bc066c3760cb13be262900958a857564e5e8eba..25ac331f03183e3e8adebcbff4d4deb012cc25ea 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
 #include "imx95.dtsi"
 
 #define FALLING_EDGE                   1
@@ -317,6 +318,48 @@
                interrupt-parent = <&gpio5>;
                interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
        };
+
+       ptn5110: tcpc@50 {
+               compatible = "nxp,ptn5110", "tcpci";
+               reg = <0x50>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_typec>;
+               interrupt-parent = <&gpio5>;
+               interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+               typec_con: connector {
+                       compatible = "usb-c-connector";
+                       label = "USB-C";
+                       power-role = "dual";
+                       data-role = "dual";
+                       try-power-role = "sink";
+                       source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+                       sink-pdos = <PDO_FIXED(5000, 0, PDO_FIXED_USB_COMM)>;
+                       op-sink-microwatt = <0>;
+                       self-powered;
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               port@0 {
+                                       reg = <0>;
+
+                                       typec_con_hs: endpoint {
+                                               remote-endpoint = <&usb3_data_hs>;
+                                       };
+                               };
+
+                               port@1 {
+                                       reg = <1>;
+
+                                       typec_con_ss: endpoint {
+                                               remote-endpoint = <&usb3_data_ss>;
+                                       };
+                               };
+                       };
+               };
+       };
 };
 
 &lpuart1 {
@@ -418,6 +461,40 @@
        status = "okay";
 };
 
+&usb3 {
+       status = "okay";
+};
+
+&usb3_dwc3 {
+       dr_mode = "otg";
+       hnp-disable;
+       srp-disable;
+       adp-disable;
+       usb-role-switch;
+       role-switch-default-mode = "peripheral";
+       snps,dis-u1-entry-quirk;
+       snps,dis-u2-entry-quirk;
+       status = "okay";
+
+       port {
+               usb3_data_hs: endpoint {
+                       remote-endpoint = <&typec_con_hs>;
+               };
+       };
+};
+
+&usb3_phy {
+       fsl,phy-tx-preemp-amp-tune-microamp = <600>;
+       orientation-switch;
+       status = "okay";
+
+       port {
+               usb3_data_ss: endpoint {
+                       remote-endpoint = <&typec_con_ss>;
+               };
+       };
+};
+
 &usdhc1 {
        pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
        pinctrl-0 = <&pinctrl_usdhc1>;
@@ -676,6 +753,12 @@
                >;
        };
 
+       pinctrl_typec: typecgrp {
+               fsl,pins = <
+                       IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14                     0x31e
+               >;
+       };
+
        pinctrl_usdhc2_gpio: usdhc2gpiogrp {
                fsl,pins = <
                        IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0               0x31e