-/******************************************************************************
-
- FileName: Q931.h
-
- Contents: Header and definition for the ITU-T Q.931 stack. The
- header contents the following parts:
-
- - Definition of codes
- - Definition of information elements (Q931ie_).
- - Definition of messages (Q931mes_).
- - Definitian of variables (var_).
- - Function prototypes.
-
- Description: The Q.931 stack provided here covers ITU-T Q.931 w/Q.932
- supplementary services for both PRI, BRI and variants.
- The stack is generic and designed to deal with variants as
- needed.
-
- The stack uses the following interface functions:
-
- - Q931Initialize Initialize the Q.931 stack.
- - Q931Rx23 Receive a message from layer 2
- - Q931Tx32 Send a message to layer 2
- - Q931Rx43 Receive a message from layer 4 or above.
- - Q931Tx34 Send a message to layer 4 or above.
- - Q931TimeTick Periodical timer processing.
- - Q931ErrorProc Callback for stack error message.
-
- The protocol is a module with no external dependencies and
- can easely be ported to any operating system like Windows,
- Linux, rtos and others.
-
- Related Files: Q931.h Q.931 Definitions
- Q931.c Q.931 Interface Functions.
- Q931api.c Low level L4 API functions.
-
- Q932.h Q.932 Suplementary Services
- Q932mes.c Q.932 encoders/coders
-
- Q931mes.c Q.931 Message encoders/coders
- Q931ie.c Q.931 IE encoders/coders
- Q931StateTE.c Generic Q.931 TE State Engine
- Q931StateNT.c Generic Q.931 NT State Engine
-
- Design Note 1: For each variant please add separate files starting with
- the variant short-name as follows:
-
- <variant>.h Spesific headers needed.
- <variant>mes.c Message encoders/decores.
- <variant>ie.c IE encoders/decoders.
- <variant>StateTE.c TE side state engine.
- <variant>StateNT.c NT side state engine.
-
- Design Note 2: The stack is deliberatly made non-threading. Use 1
- thread per Trunk, but lock access from the timertick
- and rx, tx functions. And make sure the callbacks only
- dump messages to a queue, no time-consuming processing
- inside stack processing.
-
- All stack processing is async 'fire and forget', meaning
- that there are not, and should not be any time-consuming
- processing within the stack-time. The best way to thread
- a stack is to use one single thread that signal 5 queues.
-
- - Incoming L2 queue.
- - Incoming L4 queue.
- - Outgoing L2 queue.
- - Outgoing L4 queue.
- - Error/Trace queue.
-
- Design Note 3: DSP optimization. The L3 (Rx23) can be called directly
- from a hdlc receiver without usage of queues for optimized
- processing. But keep in mind that Q.931 calls Tx34 or Tx32
- as part of receiving a message from Layer 2.
-
- License/Copyright:
-
- Copyright (c) 2007, Jan Vidar Berger, Case Labs, Ltd. All rights reserved.
- email:janvb@caselaboratories.com
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are
- met:
-
- * Redistributions of source code must retain the above copyright notice,
- this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright notice,
- this list of conditions and the following disclaimer in the documentation
- and/or other materials provided with the distribution.
- * Neither the name of the Case Labs, Ltd nor the names of its contributors
- may be used to endorse or promote products derived from this software
- without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
-******************************************************************************/
-
-#ifndef _Q931_NL
-#define _Q931_NL
-
-/* uncomment the #define below to add x.25 support to the Q.931 */
-/* #define Q931_X25_SUPPORT */
-
-#include "stdio.h"
-
-#ifdef _MSC_VER
-#pragma warning(disable:4100)
-#endif
-
-/*****************************************************************************
-
- Error Codes
-
-*****************************************************************************/
-#define Q931E_NO_ERROR 0
-#define Q931E_UNKNOWN_MESSAGE -3001
-#define Q931E_ILLEGAL_IE -3002
-#define Q931E_UNKNOWN_IE -3003
-#define Q931E_BEARERCAP -3004
-#define Q931E_HLCOMP -3005
-#define Q931E_LLCOMP -3006
-#define Q931E_INTERNAL -3007
-#define Q931E_MISSING_CB -3008
-#define Q931E_UNEXPECTED_MESSAGE -3009
-#define Q931E_ILLEGAL_MESSAGE -3010
-#define Q931E_TOMANYCALLS -3011
-#define Q931E_INVALID_CRV -3012
-#define Q931E_CALLID -3013
-#define Q931E_CALLSTATE -3014
-#define Q931E_CALLEDSUB -3015
-#define Q931E_CALLEDNUM -3016
-#define Q931E_CALLINGNUM -3017
-#define Q931E_CALLINGSUB -3018
-#define Q931E_CAUSE -3019
-#define Q931E_CHANID -3020
-#define Q931E_DATETIME -3021
-#define Q931E_DISPLAY -3022
-#define Q931E_KEYPADFAC -3023
-#define Q931E_NETFAC -3024
-#define Q931E_NOTIFIND -3025
-#define Q931E_PROGIND -3026
-#define Q931E_RESTARTIND -3027
-#define Q931E_SEGMENT -3028
-#define Q931E_SIGNAL -3029
-
-/*****************************************************************************
-
- Some speed optimization can be achieved by changing all variables to the
- word size of your processor. A 32 bit processor have to do a lot of extra
- work to read a packed 8 bit integer. Changing all fields to 32 bit integer
- will ressult in usage of some extra space, but speed up the stack.
-
- The stack have been designed to allow L3UCHAR etc. to be any size of 8 bit
- or larger.
-
-*****************************************************************************/
-
-#define L3UCHAR unsigned char /* Min 8 bit */
-#define L3USHORT unsigned short /* Min 16 bit unsigned */
-#define L3UINT unsigned int /* Min 16 bit unsigned */
-#define L3INT int /* Min 16 bit signed */
-#define L3ULONG unsigned long /* Min 32 bit */
-#define L3BOOL char /* Min 1 bit, valuse 0 & 1 only */
-
-#define L3TRUE 1
-#define L3FALSE 0
-
-/*****************************************************************************
-
- MAXTRUNKS sets how many physical trunks this system might have. This
- number should be keept at a minimum since it will use global space.
-
- It is recommended that you leave MAXCHPERTRUNK as is
-
-*****************************************************************************/
-
-#define Q931L4BUF 1000 /* size of message buffer */
-
-#define Q931L2BUF 300 /* size of message buffer */
-
-#define Q931MAXTRUNKS 1 /* Total number of trunks that will be */
- /* processed by this instance of the */
- /* stack */
-
-#define Q931MAXCHPERTRUNK 32 /* Number of channels per trunk. The */
- /* stack uses a static set of 32 */
- /* channels regardless if it is E1, T1 */
- /* or BRI that actually is used. */
-
-#define Q931MAXCALLPERTRUNK (Q931MAXCHPERTRUNK * 2)
- /* Number of max active CRV per trunk. */
- /* Q.931 can have more calls than there */
- /* are channels. */
-
-/*****************************************************************************
-
- The following defines control the dialect switch tables and should only be
- changed when a new dialect needs to be inserted into the stack.
-
- This stack uses an array of functions to know which function to call as
- it receives a SETUP message etc. A new dialect can when schoose to use
- the proc etc for standard Q.931 or insert a modified proc.
-
- This technique has also been used to distinguish between user and network
- mode to make the code as easy to read and maintainable as possible.
-
- A message and IE index have been used to save space. These indexes allowes
- the message or IE code to be used directly and will give back a new index
- into the table.
-
-*****************************************************************************/
-
-/* WARNING! Initialize Q931CreateDialectCB[] will NULL when increasing the */
-/* Q931MAXDLCT value to avoid Q931Initialize from crashing if one entry is */
-/* not used. */
-#define Q931MAXDLCT 2 /* Max dialects included in this */
- /* compile. User and Network count as */
- /* one dialect each. */
-
-
-#define Q931MAXMES 255 /* Number of messages */
-
-#define Q931MAXIE 255 /* Number of IE */
-
-#define Q931MAXSTATE 100 /* Size of state tables */
-
-/*****************************************************************************
-
- Call States for ITU-T Q.931 TE (User Mode)
-
-*****************************************************************************/
-
-#define Q931_U0 0
-#define Q931_U1 1
-#define Q931_U2 2
-#define Q931_U3 3
-#define Q931_U4 4
-#define Q931_U6 6
-#define Q931_U7 7
-#define Q931_U8 8
-#define Q931_U9 9
-#define Q931_U10 10
-#define Q931_U11 11
-#define Q931_U12 12
-#define Q931_U15 15
-#define Q931_U17 17
-#define Q931_U19 19
-#define Q931_U25 25
-
-/*****************************************************************************
-
- Call States for ITU-T Q.931 NT (Network Mode)
-
-*****************************************************************************/
-#define Q931_N0 (0x0100 | 0)
-#define Q931_N1 (0x0100 | 1)
-#define Q931_N2 (0x0100 | 2)
-#define Q931_N3 (0x0100 | 3)
-#define Q931_N4 (0x0100 | 4)
-#define Q931_N6 (0x0100 | 6)
-#define Q931_N7 (0x0100 | 7)
-#define Q931_N8 (0x0100 | 8)
-#define Q931_N9 (0x0100 | 9)
-#define Q931_N10 (0x0100 | 11)
-#define Q931_N11 (0x0100 | 11)
-#define Q931_N12 (0x0100 | 12)
-#define Q931_N15 (0x0100 | 15)
-#define Q931_N17 (0x0100 | 17)
-#define Q931_N19 (0x0100 | 19)
-#define Q931_N22 (0x0100 | 22)
-#define Q931_N25 (0x0100 | 25)
-
-/*****************************************************************************
-
- Q.931 Message codes
-
-*****************************************************************************/
-
-#define Q931mes_ALERTING 0x01 /* 0000 0001 */
-#define Q931mes_CALL_PROCEEDING 0x02 /* 0000 0010 */
-#define Q931mes_CONNECT 0x07 /* 0000 0111 */
-#define Q931mes_CONNECT_ACKNOWLEDGE 0x0f /* 0000 1111 */
-#define Q931mes_PROGRESS 0x03 /* 0000 0011 */
-#define Q931mes_SETUP 0x05 /* 0000 0101 */
-#define Q931mes_SETUP_ACKNOWLEDGE 0x0d /* 0000 1101 */
-#define Q931mes_RESUME 0x26 /* 0010 0110 */
-#define Q931mes_RESUME_ACKNOWLEDGE 0x2e /* 0010 1110 */
-#define Q931mes_RESUME_REJECT 0x22 /* 0010 0010 */
-#define Q931mes_SUSPEND 0x25 /* 0010 0101 */
-#define Q931mes_SUSPEND_ACKNOWLEDGE 0x2d /* 0010 1101 */
-#define Q931mes_SUSPEND_REJECT 0x21 /* 0010 0001 */
-#define Q931mes_USER_INFORMATION 0x20 /* 0010 0000 */
-#define Q931mes_DISCONNECT 0x45 /* 0100 0101 */
-#define Q931mes_RELEASE 0x4d /* 0100 1101 */
-#define Q931mes_RELEASE_COMPLETE 0x5a /* 0101 1010 */
-#define Q931mes_RESTART 0x46 /* 0100 0110 */
-#define Q931mes_RESTART_ACKNOWLEDGE 0x4e /* 0100 1110 */
-#define Q931mes_CONGESTION_CONTROL 0x79 /* 0111 1001 */
-#define Q931mes_INFORMATION 0x7a /* 0111 1011 */
-#define Q931mes_NOTIFY 0x6e /* 0110 1110 */
-#define Q931mes_STATUS 0x7d /* 0111 1101 */
-#define Q931mes_STATUS_ENQUIRY 0x75 /* 0111 0101 */
-#define Q931mes_SEGMENT 0x60 /* 0110 0000 */
-
-
-/* Single octet information elements */
-#define Q931ie_SHIFT 0x90 /* 1001 ---- */
-#define Q931ie_MORE_DATA 0xa0 /* 1010 ---- */
-#define Q931ie_SENDING_COMPLETE 0xa1 /* 1010 0000 */
-#define Q931ie_CONGESTION_LEVEL 0xb0 /* 1011 ---- */
-#define Q931ie_REPEAT_INDICATOR 0xd0 /* 1101 ---- */
-
-/* Variable Length Information Elements */
-#define Q931ie_SEGMENTED_MESSAGE 0x00 /* 0000 0000 */
-#define Q931ie_BEARER_CAPABILITY 0x04 /* 0000 0100 */
-#define Q931ie_CAUSE 0x08 /* 0000 1000 */
-#define Q931ie_CALL_IDENTITY 0x10 /* 0001 0000 */
-#define Q931ie_CALL_STATE 0x14 /* 0001 0100 */
-#define Q931ie_CHANNEL_IDENTIFICATION 0x18 /* 0001 1000 */
-#define Q931ie_PROGRESS_INDICATOR 0x1e /* 0001 1110 */
-#define Q931ie_NETWORK_SPECIFIC_FACILITIES 0x20 /* 0010 0000 */
-#define Q931ie_NOTIFICATION_INDICATOR 0x27 /* 0010 0111 */
-#define Q931ie_DISPLAY 0x28 /* 0010 1000 */
-#define Q931ie_DATETIME 0x29 /* 0010 1001 */
-#define Q931ie_KEYPAD_FACILITY 0x2c /* 0010 1100 */
-#define Q931ie_SIGNAL 0x34 /* 0011 0100 */
-#define Q931ie_SWITCHOOK 0x36 /* 0011 0110 */
-#define Q931ie_FEATURE_ACTIVATION 0x38 /* 0011 1000 */
-#define Q931ie_FEATURE_INDICATION 0x39 /* 0011 1001 */
-#define Q931ie_INFORMATION_RATE 0x40 /* 0100 0000 */
-#define Q931ie_END_TO_END_TRANSIT_DELAY 0x42 /* 0100 0010 */
-#define Q931ie_TRANSIT_DELAY_SELECTION_AND_IND 0x43 /* 0100 0011 */
-#define Q931ie_PACKED_LAYER_BIMARY_PARAMETERS 0x44 /* 0100 0100 */
-#define Q931ie_PACKED_LAYER_WINDOW_SIZE 0x45 /* 0100 0101 */
-#define Q931ie_PACKED_SIZE 0x46 /* 0100 0110 */
-#define Q931ie_CALLING_PARTY_NUMBER 0x6c /* 0110 1100 */
-#define Q931ie_CALLING_PARTY_SUBADDRESS 0x6d /* 0110 1101 */
-#define Q931ie_CALLED_PARTY_NUMBER 0x70 /* 0111 0000 */
-#define Q931ie_CALLED_PARTY_SUBADDRESS 0x71 /* 0111 0001 */
-#define Q931ie_REDIRECTING_NUMBER 0x74 /* 0111 0100 */
-#define Q931ie_TRANSIT_NETWORK_SELECTION 0x78 /* 0111 1000 */
-#define Q931ie_RESTART_INDICATOR 0x79 /* 0111 1001 */
-#define Q931ie_LOW_LAYER_COMPATIBILITY 0x7c /* 0111 1100 */
-#define Q931ie_HIGH_LAYER_COMPATIBILITY 0x7d /* 0111 1101 */
-#define Q931ie_USER_USER 0x7e /* 0111 1110 */
-#define Q931ie_ESCAPE_FOR_EX 0x7f /* 0111 1111 */
-
-/*****************************************************************************
-
- Global defines.
-
-*****************************************************************************/
-
-typedef L3USHORT ie; /* Special data type to hold a dynamic */
- /* or optional information element as */
- /* part of a message struct. MSB = 1 */
- /* indicate that the ie is present, the */
- /* last 15 bits is an offset ( or the */
- /* value for single octet ) to the */
- /* struct holding the ie. Offset = 0 */
- /* is buf[1] etc. */
- /* ie == 0xffff indicate error */
-
-/*****************************************************************************
-
- Struct: Q931ie_BearerCap
-
- Description: Bearer Capability Information Element.
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UCHAR IEId; /* 00000100 for Bearer Capability */
-
- L3UCHAR Size; /* Length of Information Element */
-
- L3UCHAR CodStand; /* Coding Standard. */
- /* 00 - ITU-T */
- /* 01 - ISO/IEC */
- /* 10 - National standard */
- /* 11 - Network side spesific */
-
- L3UCHAR ITC; /* Information Transfer Capability */
- /* 00000 - Speech */
- /* 01000 - Unrestricted digital info */
- /* 01001 - Restricted digital info */
- /* 10000 - 3.1 kHz audio */
- /* 10001 - Unrestricted with tones */
- /* 11000 - Video */
-
- L3UCHAR TransMode; /* Transfer Mode. */
- /* 00 - Circuit mode */
- /* 10 - Packet mode */
-
- L3UCHAR ITR; /* Information Transfer Rate. */
- /* 00000 - Packed mode */
- /* 10000 - 64 kbit/s */
- /* 10001 - 2 x 64 kbit/s */
- /* 10011 - 384 kbit/s */
- /* 10101 - 1536 kbit/s */
- /* 10111 - 1920 kbit/s */
- /* 11000 - Multirat (64 kbit/s base) */
-
- L3UCHAR RateMul; /* Rate Multiplier */
-
- L3UCHAR Layer1Ident; /* Layer 1 Ident. */
-
- L3UCHAR UIL1Prot; /* User Information Layer 1 Protocol */
- /* 00001 : ITU-T V.110, I.460 and X.30 */
- /* 00010 : G.711 my-law */
- /* 00011 : G.711 A-law */
- /* 00100 : G.721 */
- /* 00101 : H.221 and H.242 */
- /* 00110 : H.223 and H.245 */
- /* 00111 : Non ITU-T Standard */
- /* 01000 : ITU-T V.120 */
- /* 01001 : ITU-T X.31 HDLC flag stuff. */
-
- L3UCHAR SyncAsync; /* Sync/Async */
- /* 0 : Syncronous data */
- /* 1 : Asyncronous data */
-
- L3UCHAR Negot; /* Negotiation */
- /* 0 : In-band negotiation not possib. */
- /* 1 : In-band negotiation possible */
-
- L3UCHAR UserRate; /* User rate */
- /* 00000 : I.460, V.110, X,30 */
- /* 00001 : 0.6 kbit/s x.1 */
- /* 00010 : 1.2 kbit/s */
- /* 00011 : 2.4 kbit/s */
- /* 00100 : 3.6 kbit/s */
- /* 00101 : 4.8 kbit/s */
- /* 00110 : 7.2 kbit/s */
- /* 00111 : 8 kbit/s I.460 */
- /* 01000 : 9.6 kbit/s */
- /* 01001 : 14.4 kbit/s */
- /* 01010 : 16 kbit/s */
- /* 01011 : 19.2 kbit/s */
- /* 01100 : 32 kbit/s */
- /* 01101 : 38.4 kbit/s */
- /* 01110 : 48 kbit/s */
- /* 01111 : 56 kbit/s */
- /* 10000 : 57.6 kbit/s */
- /* 10010 : 28.8 kbit/s */
- /* 10100 : 24 kbit/s */
- /* 10101 : 0.1345 kbit/s */
- /* 10110 : 0.100 kbit/s */
- /* 10111 : 0.075/1.2 kbit/s */
- /* 11000 : 1.2/0.075/kbit/s */
- /* 11001 : 0.050 kbit/s */
- /* 11010 : 0.075 kbit/s */
- /* 11011 : 0.110 kbit/s */
- /* 11100 : 0.150 kbit/s */
- /* 11101 : 0.200 kbit/s */
- /* 11110 : 0.300 kbit/s */
- /* 11111 : 12 kbit/s */
-
- L3UCHAR InterRate; /* Intermediate Rate */
- /* 00 : Not used */
- /* 01 : 8 kbit/s */
- /* 10 : 16 kbit/s */
- /* 11 : 32 kbit/s */
-
- L3UCHAR NIConTx; /* Network Indepentend Clock on transmit*/
- /* 0 : Not required to send data clc */
- /* 1 : Send data w/NIC clc */
-
- L3UCHAR NIConRx; /* NIC on Rx */
- /* 0 : Cannot accept indep. clc */
- /* 1 : data with indep. clc accepted */
-
- L3UCHAR FlowCtlTx; /* Flow control on Tx */
- /* 0 : Send Flow ctrl not required */
- /* 1 : Send flow ctrl required */
-
- L3UCHAR FlowCtlRx; /* Flow control on Rx */
- /* 0 : cannot use receive flow ctrl */
- /* 1 : Receive flow ctrl accepted */
- L3UCHAR HDR; /* HDR/No HDR */
- L3UCHAR MultiFrame; /* Multi frame support */
- /* 0 : multiframe not supported */
- /* 1 : multiframe supported */
-
- L3UCHAR Mode; /* Mode of operation */
- /* 0 : bit transparent mode of operat. */
- /* 1 : protocol sesitive mode of op. */
-
- L3UCHAR LLInegot; /* Logical link id negotiation (oct. 5b)*/
- /* 0 : default LLI=256 only */
- /* 1 : Full protocol negotiation */
-
- L3UCHAR Assignor; /* Assignor/assignee */
- /* 0 : Default Asignee */
- /* 1 : Assignor only */
-
- L3UCHAR InBandNeg; /* In-band/out-band negot. */
- /* 0 : negot done w/ USER INFO mes */
- /* 1 : negot done in-band w/link zero */
-
- L3UCHAR NumStopBits; /* Number of stop bits */
- /* 00 : Not used */
- /* 01 : 1 bit */
- /* 10 : 1.5 bits */
- /* 11 : 2 bits */
-
- L3UCHAR NumDataBits; /* Number of data bits. */
- /* 00 : not used */
- /* 01 : 5 bits */
- /* 10 : 7 bits */
- /* 11 : 8 bits */
-
- L3UCHAR Parity; /* Parity Information */
- /* 000 : Odd */
- /* 010 : Even */
- /* 011 : None */
- /* 100 : Forced to 0 */
- /* 101 : Forced to 1 */
-
- L3UCHAR DuplexMode; /* Mode duplex */
- /* 0 : Half duplex */
- /* 1 : Full duplex */
-
- L3UCHAR ModemType; /* Modem type, see Q.931 p 64 */
-
- L3UCHAR Layer2Ident; /* Layer 2 Ident */
-
- L3UCHAR UIL2Prot; /* User Information Layer 2 Protocol */
- /* 00010 : Q.921/I.441 */
- /* 00110 : X.25 */
- /* 01100 : LAN logical link */
-
- L3UCHAR Layer3Ident; /* Layer 3 ident. */
-
- L3UCHAR UIL3Prot; /* User Information Layer 3 Protocol */
- /* 00010 : Q.931 */
- /* 00110 : X.25 */
- /* 01011 : ISO/IEC TR 9577 */
-
- L3UCHAR AL3Info1; /* additional layer 3 info 1 */
-
- L3UCHAR AL3Info2; /* additional layer 3 info 2 */
-}Q931ie_BearerCap;
-
-/*****************************************************************************
-
- Struct: Q931ie_CallID
-
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UCHAR IEId; /* 00010000 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR CallId[1]; /* Call identity */
-}Q931ie_CallID;
-
-/*****************************************************************************
-
- Struct: Q931ie_CallState
-
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UCHAR IEId; /* 00010100 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR CodStand; /* Coding Standard */
- L3UCHAR CallState; /* Call State Value */
-}Q931ie_CallState;
-
-/*****************************************************************************
-
- Struct: Q931ie_Cause
-
- Description: Cause IE as described in Q.850
-
-*****************************************************************************/
-typedef struct
-{
- L3UCHAR IEId; /* 00010100 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR CodStand; /* Coding Standard */
- L3UCHAR Location; /* Location */
- L3UCHAR Recom; /* Recommendation */
- L3UCHAR Value; /* Cause Value */
- L3UCHAR Diag[1]; /* Optional Diagnostics Field */
-}Q931ie_Cause;
-
-/*****************************************************************************
-
- Struct: Q931ie_CalledNum
-
-*****************************************************************************/
-typedef struct
-{
- L3UCHAR IEId; /* 01110000 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR TypNum; /* Type of Number */
- L3UCHAR NumPlanID; /* Numbering plan identification */
- L3UCHAR Digit[1]; /* Digit (IA5) */
-}Q931ie_CalledNum;
-
-/*****************************************************************************
-
- Struct: Q931ie_CalledSub
-
- Description: Called party subaddress
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UCHAR IEId; /* 01110001 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR TypNum; /* Type of subaddress */
- L3UCHAR OddEvenInd; /* Odd/Even indicator */
- L3UCHAR Digit[1]; /* digits */
-}Q931ie_CalledSub;
-
-/*****************************************************************************
-
- Struct: Q931ie_CallingNum
-
- Description: Calling party number
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UCHAR IEId; /* 01101100 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR TypNum; /* Type of number */
- L3UCHAR NumPlanID; /* Numbering plan identification */
- L3UCHAR PresInd; /* Presentation indicator */
- L3UCHAR ScreenInd; /* Screening indicator */
- L3UCHAR Digit[1]; /* Number digits (IA5) */
-}Q931ie_CallingNum;
-
-/*****************************************************************************
-
- Struct: Q931ie_CallingSub
-
- Description: Calling party subaddress
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UCHAR IEId; /* 01101101 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR TypNum; /* Type of subaddress */
- L3UCHAR OddEvenInd; /* Odd/Even indicator */
- L3UCHAR Digit[1]; /* digits */
-}Q931ie_CallingSub;
-
-/*****************************************************************************
-
- Struct: Q931ie_ChanID
-
- Description: Channel identification
-
- Channel Identificationis one of the IE elements that differ
- between BRI and PRI. IntType = 1 = BRI and ChanSlot is used
- for channel number, while InfoChanSel is used for BRI.
-
- ChanID is one of the most important IE as it is passed
- either though SETUP or CALL PROCEEDING to select the channel
- to be used.
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UCHAR IEId; /* 00011000 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR IntIDPresent; /* Int. id. present */
- L3UCHAR IntType; /* Interface Type */
- /* 0 : Basic Interface (BRI) */
- /* 1 : Other interfaces, PRI etc. */
-
- L3UCHAR PrefExcl; /* Pref./Excl. */
- /* 0 : Indicated channel is preffered */
- /* 1 : Exclusive, no other accepted */
-
- L3UCHAR DChanInd; /* D-channel ind. */
- /* 0 : chan is NOT D chan. */
- /* 1 : chan is D chan */
-
- L3UCHAR InfoChanSel; /* Info. channel selection */
- /* 00 : No channel */
- /* 01 : B1 channel */
- /* 10 : B2 channel */
- /* 11 : Any channel */
-
- L3UCHAR InterfaceID; /* Interface identifier */
-
- L3UCHAR CodStand; /* Code standard */
- /* 00 : ITU-T standardization coding */
- /* 01 : ISO/IEC Standard */
- /* 10 : National Standard */
- /* 11 : Standard def. by network. */
-
- L3UCHAR NumMap; /* Number/Map */
- /* 0 : chan is in following octet */
- /* 1 : chan is indicated by slot map */
-
- L3UCHAR ChanMapType; /* Channel type/Map element type */
- /* 0011 : B Channel units */
- /* 0110 : H0 channel units */
- /* 1000 : H11 channel units */
- /* 1001 : H12 channel units */
-
- L3UCHAR ChanSlot; /* Channel number */
-}Q931ie_ChanID;
-
-/*****************************************************************************
-
- Struct: Q931ie_DateTime
-
- Description: Date/time
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UCHAR IEId; /* 00101001 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR Year; /* Year */
- L3UCHAR Month; /* Month */
- L3UCHAR Day; /* Day */
- L3UCHAR Hour; /* Hour */
- L3UCHAR Minute; /* Minute */
- L3UCHAR Second; /* Second */
- L3UCHAR Format; /* Indicate presense of Hour, Min & sec */
- /* 0 : Only Date */
- /* 1 : Hour present */
- /* 2 : Hour and Minute present */
- /* 3 : Hour, Minute and Second present */
-}Q931ie_DateTime;
-
-/*****************************************************************************
-
- Struct: Q931ie_Display
-
- Description: Display
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UCHAR IEId; /* 00101000 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR Display[1]; /* Display information (IA5) */
-}Q931ie_Display;
-
-/*****************************************************************************
-
- Struct: Q931ie_HLComp
-
- Description: High layer compatibility
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UCHAR IEId; /* 01111101 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR CodStand; /* Coding standard */
- L3UCHAR Interpret; /* Interpretation */
- L3UCHAR PresMeth; /* Presentation methor of prot. profile */
- L3UCHAR HLCharID; /* High layer characteristics id. */
- L3UCHAR EHLCharID; /* Extended high layer character. id. */
- L3UCHAR EVideoTlfCharID; /* Ext. videotelephony char. id. */
-}Q931ie_HLComp;
-
-/*****************************************************************************
-
- Struct: Q931ie_KeypadFac
-
- Description: Keypad facility
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UCHAR IEId; /* 00101100 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR KeypadFac[1]; /* dynamic buffer */
-}Q931ie_KeypadFac;
-
-/*****************************************************************************
-
- Struct: Q931ie_LLComp
-
- Description: Low layer compatibility
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UCHAR IEId; /* 01111100 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR CodStand; /* Coding standard */
- /* 00 - ITU-T */
- /* 01 - ISO/IEC */
- /* 10 - National standard */
- /* 11 - Network side spesific */
-
- L3UCHAR ITransCap; /* Information transfer capability */
- /* 00000 - Speech */
- /* 01000 - Unrestricted digital info */
- /* 01001 - Restricted digital info */
- /* 10000 - 3.1 kHz audio */
- /* 10001 - Unrestricted with tones */
- /* 11000 - Video */
-
- L3UCHAR NegotInd; /* Negot indic. */
- /* 0 : Out-band neg. not possib. */
- /* 1 : Out-band neg. possible */
-
- L3UCHAR TransMode; /* Transfer Mode */
- /* 00 : Circuit Mode */
- /* 10 : Packed Mode */
-
- L3UCHAR InfoRate; /* Information transfer rate */
- /* 00000 - Packed mode */
- /* 10000 - 64 kbit/s */
- /* 10001 - 2 x 64 kbit/s */
- /* 10011 - 384 kbit/s */
- /* 10101 - 1536 kbit/s */
- /* 10111 - 1920 kbit/s */
- /* 11000 - Multirat (64 kbit/s base) */
-
- L3UCHAR RateMul; /* Rate multiplier */
- L3UCHAR Layer1Ident; /* Layer 1 ident. */
- L3UCHAR UIL1Prot; /* User information layer 1 protocol */
- /* 00001 : ITU-T V.110, I.460 and X.30 */
- /* 00010 : G.711 my-law */
- /* 00011 : G.711 A-law */
- /* 00100 : G.721 */
- /* 00101 : H.221 and H.242 */
- /* 00110 : H.223 and H.245 */
- /* 00111 : Non ITU-T Standard */
- /* 01000 : ITU-T V.120 */
- /* 01001 : ITU-T X.31 HDLC flag stuff. */
-
- L3UCHAR SyncAsync; /* Synch/asynch */
- /* 0 : Syncronous data */
- /* 1 : Asyncronous data */
-
- L3UCHAR Negot; /* Negot */
- /* 0 : In-band negotiation not possib. */
- /* 1 : In-band negotiation possible */
-
- L3UCHAR UserRate; /* User rate */
- /* 00000 : I.460, V.110, X,30 */
- /* 00001 : 0.6 kbit/s x.1 */
- /* 00010 : 1.2 kbit/s */
- /* 00011 : 2.4 kbit/s */
- /* 00100 : 3.6 kbit/s */
- /* 00101 : 4.8 kbit/s */
- /* 00110 : 7.2 kbit/s */
- /* 00111 : 8 kbit/s I.460 */
- /* 01000 : 9.6 kbit/s */
- /* 01001 : 14.4 kbit/s */
- /* 01010 : 16 kbit/s */
- /* 01011 : 19.2 kbit/s */
- /* 01100 : 32 kbit/s */
- /* 01101 : 38.4 kbit/s */
- /* 01110 : 48 kbit/s */
- /* 01111 : 56 kbit/s */
- /* 10000 : 57.6 kbit/s */
- /* 10010 : 28.8 kbit/s */
- /* 10100 : 24 kbit/s */
- /* 10101 : 0.1345 kbit/s */
- /* 10110 : 0.100 kbit/s */
- /* 10111 : 0.075/1.2 kbit/s */
- /* 11000 : 1.2/0.075/kbit/s */
- /* 11001 : 0.050 kbit/s */
- /* 11010 : 0.075 kbit/s */
- /* 11011 : 0.110 kbit/s */
- /* 11100 : 0.150 kbit/s */
- /* 11101 : 0.200 kbit/s */
- /* 11110 : 0.300 kbit/s */
- /* 11111 : 12 kbit/s */
-
- L3UCHAR InterRate; /* Intermediate rate */
- /* 00 : Not used */
- /* 01 : 8 kbit/s */
- /* 10 : 16 kbit/s */
- /* 11 : 32 kbit/s */
-
- L3UCHAR NIConTx; /* Network Indepentend Clock on transmit*/
- /* 0 : Not required to send data clc */
- /* 1 : Send data w/NIC clc */
-
- L3UCHAR NIConRx; /* NIC on Rx */
- /* 0 : Cannot accept indep. clc */
- /* 1 : data with indep. clc accepted */
-
- L3UCHAR FlowCtlTx; /* Flow control on Tx */
- /* 0 : Send Flow ctrl not required */
- /* 1 : Send flow ctrl required */
-
- L3UCHAR FlowCtlRx; /* Flow control on Rx */
- /* 0 : cannot use receive flow ctrl */
- /* 1 : Receive flow ctrl accepted */
- L3UCHAR HDR; /* HDR/No HDR */
- L3UCHAR MultiFrame; /* Multi frame support */
- /* 0 : multiframe not supported */
- /* 1 : multiframe supported */
-
- L3UCHAR ModeL1; /* Mode L1 */
- /* 0 : bit transparent mode of operat. */
- /* 1 : protocol sesitive mode of op. */
-
- L3UCHAR NegotLLI; /* Negot. LLI */
- /* 0 : default LLI=256 only */
- /* 1 : Full protocol negotiation */
-
- L3UCHAR Assignor; /* Assignor/Assignor ee */
- /* 0 : Default Asignee */
- /* 1 : Assignor only */
-
- L3UCHAR InBandNeg; /* In-band negot. */
- /* 0 : negot done w/ USER INFO mes */
- /* 1 : negot done in-band w/link zero */
-
- L3UCHAR NumStopBits; /* Number of stop bits */
- /* 00 : Not used */
- /* 01 : 1 bit */
- /* 10 : 1.5 bits */
- /* 11 : 2 bits */
-
- L3UCHAR NumDataBits; /* Number of data bits. */
- /* 00 : not used */
- /* 01 : 5 bits */
- /* 10 : 7 bits */
- /* 11 : 8 bits */
-
- L3UCHAR Parity; /* Parity Information */
- /* 000 : Odd */
- /* 010 : Even */
- /* 011 : None */
- /* 100 : Forced to 0 */
- /* 101 : Forced to 1 */
-
- L3UCHAR DuplexMode; /* Mode duplex */
- /* 0 : Half duplex */
- /* 1 : Full duplex */
-
- L3UCHAR ModemType; /* Modem type, see Q.931 p 89 */
-
- L3UCHAR Layer2Ident; /* Layer 2 ident. */
-
- L3UCHAR UIL2Prot; /* User information layer 2 protocol */
- /* 00001 : Basic mode ISO 1745 */
- /* 00010 : Q.921/I.441 */
- /* 00110 : X.25 single link */
- /* 00111 : X.25 multilink */
- /* 01000 : Extended LAPB T.71 */
- /* 01001 : HDLC ARM */
- /* 01010 : HDLC NRM */
- /* 01011 : HDLC ABM */
- /* 01100 : LAN logical link */
- /* 01101 : X.75 SLP */
- /* 01110 : Q.922 */
- /* 01111 : Q.922 core aspect */
- /* 10000 : User specified */
- /* 10001 : ISO/IEC 7776 DTE-DCE */
-
- L3UCHAR ModeL2; /* Mode */
- /* 01 : Normal Mode of operation */
- /* 10 : Extended mode of operation */
-
- L3UCHAR Q933use; /* Q.9333 use */
-
- L3UCHAR UsrSpcL2Prot; /* User specified layer 2 protocol info */
-
- L3UCHAR WindowSize; /* Window size (k) */
-
- L3UCHAR Layer3Ident; /* Layer 3 ident */
-
- L3UCHAR UIL3Prot; /* User Information Layer 3 protocol */
- /* 00010 : Q.931 */
- /* 00110 : X.25 */
- /* 00111 : 8208 */
- /* 01000 : X.233 ... */
- /* 01001 : 6473 */
- /* 01010 : T.70 */
- /* 01011 : ISO/IEC TR 9577 */
- /* 10000 : User specified */
- L3UCHAR OptL3Info; /* Optional Leyer 3 info */
-
- L3UCHAR ModeL3; /* Mode of operation */
- /* 01 : Normal packed seq. numbering */
- /* 10 : Extended packed seq. numbering */
-
- L3UCHAR DefPackSize; /* Default packet size */
-
- L3UCHAR PackWinSize; /* Packet window size */
-
- L3UCHAR AddL3Info; /* Additional Layer 3 protocol info */
-}Q931ie_LLComp;
-
-/*****************************************************************************
-
- Struct: Q931ie_NetFac;
-
- Description: Network-specific facilities
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UCHAR IEId; /* 00100000 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR LenNetID; /* Length of network facilities id. */
- L3UCHAR TypeNetID; /* Type of network identification */
- L3UCHAR NetIDPlan; /* Network identification plan. */
- L3UCHAR NetFac; /* Network specific facility spec. */
- L3UCHAR NetID[1]; /* Network id. (IA5) */
-}Q931ie_NetFac;
-
-/*****************************************************************************
-
- Struct: Q931ie_NotifInd;
-
- Description: Notification Indicator
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UCHAR IEId; /* 00100000 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR Notification; /* Notification descriptor */
-}Q931ie_NotifInd;
-
-/*****************************************************************************
-
- Struct: Q931ie_ProgInd
-
- Description: Progress indicator
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UCHAR IEId; /* 00011110 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR CodStand; /* Coding standard */
- L3UCHAR Location; /* Location */
- L3UCHAR ProgDesc; /* Progress description */
-}Q931ie_ProgInd;
-
-/*****************************************************************************
-
- Struct; Q931ie_Segment
-
- Description: Segmented message
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UCHAR IEId; /* 00000000 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR FSI; /* First segment indicator */
- L3UCHAR NumSegRem; /* Number of segments remaining */
- L3UCHAR SegType; /* Segment message type */
-}Q931ie_Segment;
-
-typedef struct
-{
- L3UCHAR IEId; /* 00000000 */
- L3UCHAR Size; /* Length of Information Element */
-}Q931ie_SendComplete;
-
-/*****************************************************************************
-
- Struct: Q931ie_Signal
-
- Description: Signal
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UCHAR IEId; /* 00000000 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR Signal; /* Signal value */
- /* 00000000 Dial tone on */
- /* 00000001 Ring back tone on */
- /* 00000010 Intercept tone on */
- /* 00000011 Network congestion on */
- /* 00000100 Busy tone on */
- /* 00000101 Confirm tone on */
- /* 00000110 Answer tone on */
- /* 00000111 Call waiting tone */
- /* 00001000 Off-hook warning tone */
- /* 00001001 Pre-emption tone on */
- /* 00111111 Tones off */
- /* 01000000 Alerting on - pattern 0 */
- /* 01000001 Alerting on - pattern 1 */
- /* 01000010 Alerting on - pattern 2 */
- /* 01000011 Alerting on - pattern 3 */
- /* 01000100 Alerting on - pattern 4 */
- /* 01000101 Alerting on - pattern 5 */
- /* 01000110 Alerting on - pattern 6 */
- /* 01000111 Alerting on - pattern 7 */
- /* 01001111 Alerting off */
-}Q931ie_Signal;
-
-/*****************************************************************************
-
- Struct: Q931ie_TransDelSelInd
-
- description: Transit delay selection and indication
-
-*****************************************************************************/
-#ifdef Q931_X25_SUPPORT
-typedef struct
-{
- L3UCHAR IEId; /* 00000000 */
- L3UCHAR Size; /* Length of Information Element */
- L3ULONG TxDSIValue; /* Trans. delay sel. & ind. value */
-}Q931ie_TransDelSelInd;
-#endif
-
-/*****************************************************************************
-
- Struct: Q931ie_TransNetSel
-
- Description: Transit network selection
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UCHAR IEId; /* 01111000 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR Type; /* Type of network identifier */
- L3UCHAR NetIDPlan; /* Network idetification plan */
- L3UCHAR NetID[1]; /* Network identification(IA5) */
-}Q931ie_TransNetSel;
-
-/*****************************************************************************
-
- Struct: Q931ie_UserUser
-
- Description: User-user
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UCHAR IEId; /* 01111110 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR ProtDisc; /* Protocol discriminator */
- L3UCHAR User[1]; /* User information */
-}Q931ie_UserUser;
-
-/*****************************************************************************
-
- Struct: Q931ie_ClosedUserGrp
-
- Description: Closed user group
-
-*****************************************************************************/
-#ifdef Q931_X25_SUPPORT
-typedef struct
-{
- L3UCHAR IEId; /* 01000111 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR CUGInd; /* CUG indication */
- L3UCHAR CUG[1]; /* CUG index code (IA5) */
-}Q931ie_ClosedUserGrp;
-#endif
-
-/*****************************************************************************
-
- Struct: Q931ie_CongLevel
-
- Description: Congestion Level
-
-*****************************************************************************/
-typedef struct
-{
- L3UCHAR IEId; /* 01000111 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR CongLevel; /* Conguestion Level */
-}Q931ie_CongLevel;
-
-/*****************************************************************************
-
- Struct: Q931ie_EndEndTxDelay
-
- Description: End to end transit delay
-
-*****************************************************************************/
-#ifdef Q931_X25_SUPPORT
-typedef struct
-{
- L3UCHAR IEId; /* 01000010 */
- L3UCHAR Size; /* Length of Information Element */
- L3ULONG CumTxDelay; /* Cumulative transit delay value */
- L3ULONG ReqTxDelay; /* Requested end to end transit delay */
- L3ULONG MaxTxDelay; /* Maximum transit delay */
-}Q931ie_EndEndTxDelay;
-#endif
-
-/*****************************************************************************
-
- Struct: Q931ie_InfoRate
-
- Description: Information Rate
-
-*****************************************************************************/
-#ifdef Q931_X25_SUPPORT
-typedef struct
-{
- L3UCHAR IEId; /* 01100000 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR InInfoRate; /* Incoming information rate */
- L3UCHAR OutInfoRate; /* Outgoing information rate */
- L3UCHAR MinInInfoRate; /* Minimum incoming information rate */
- L3UCHAR MinOutInfoRate; /* Minimum outgoing information rate */
-}Q931ie_InfoRate;
-#endif
-
-/*****************************************************************************
-
- Struct: Q931ie_PackParam
-
- Description: Packed layer binary parameters
-
-*****************************************************************************/
-#ifdef Q931_X25_SUPPORT
-typedef struct
-{
- L3UCHAR IEId; /* 01000100 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR FastSel; /* Fast selected */
- L3UCHAR ExpData; /* Exp. data */
- L3UCHAR DelConf; /* Delivery conf */
- L3UCHAR Modulus; /* Modulus */
-}Q931ie_PackParam;
-#endif
-
-/*****************************************************************************
-
- Struct: Q931ie_PackWinSize
-
- Description: Packed window size
-
-*****************************************************************************/
-#ifdef Q931_X25_SUPPORT
-typedef struct
-{
- L3UCHAR IEId; /* 01000101 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR ForwardValue; /* Forward value */
- L3UCHAR BackwardValue; /* Backward value */
-}Q931ie_PackWinSize;
-#endif
-
-/*****************************************************************************
-
- Struct: Q931ie_PackSize
-
- Description: Packet size
-
-*****************************************************************************/
-#ifdef Q931_X25_SUPPORT
-typedef struct
-{
- L3UCHAR IEId; /* 01000110 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR ForwardValue; /* Forward value */
- L3UCHAR BackwardValue; /* Backward value */
-}Q931ie_PackSize;
-#endif
-
-/*****************************************************************************
-
- Struct: Q931ie_RedirNum
-
- Description: Redirecting number
-
-*****************************************************************************/
-#ifdef Q931_X25_SUPPORT
-typedef struct
-{
- L3UCHAR IEId; /* 01110100 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR TypeNum; /* Type of number */
- L3UCHAR NumPlanID; /* Number plan identification */
- L3UCHAR PresInd; /* Presentation indicator */
- L3UCHAR ScreenInd; /* Screening indicator */
- L3UCHAR Reason; /* Reason for redirection */
- L3UCHAR Digit[1]; /* Number digits (IA5) */
-}Q931ie_RedirNum;
-#endif
-
-typedef struct
-{
- L3UCHAR IEId; /* 01110100 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR RepeatInd; /* 0010 Prioritized list for selecting */
- /* one possible. */
-}Q931ie_RepeatInd;
-
-typedef struct
-{
- L3UCHAR IEId; /* 01110100 */
- L3UCHAR Size; /* Length of Information Element */
- L3UCHAR Class; /* Class */
- /* 000 Indicate channels */
- /* 110 Single interface */
- /* 111 All interfaces */
-}Q931ie_RestartInd;
-
-/*****************************************************************************
-
- Struct: Q931mes_Header
-
- Description: Used to read the header & message code.
-
-*****************************************************************************/
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
-}Q931mes_Header;
-
-/*****************************************************************************
-
- Struct: Q931mes_Generic
-
- Description: Generic header containing all IE's. This is not used, but is
- provided in case a proprietary variant needs it.
-
-*****************************************************************************/
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
-
- ie Shift;
- ie MoreData;
- ie SendComplete;
- ie CongestionLevel;
- ie RepeatInd;
-
- ie Segment; /* Segmented message */
- ie BearerCap; /* Bearer Capability */
- ie Cause; /* Cause */
- ie CallID; /* Call Identity */
- ie ChanID; /* Channel Identification */
- ie ProgInd; /* Progress Indicator */
- ie NetFac; /* Network Spesific Facilities */
- ie NotifInd; /* Notification Indicator */
- ie Display; /* Display */
- ie DateTime; /* Date/Time */
- ie KeypadFac; /* Keypad Facility */
- ie Signal; /* Signal */
- ie InfoRate; /* Information rate */
- ie EndEndTxDelay; /* End to End Transmit Delay */
- ie TransDelSelInd; /* Transmit Delay Sel. and Ind. */
- ie PackParam; /* Packed Layer Binary parameters */
- ie PackWinSize; /* Packet Layer Window Size */
- ie PackSize; /* Packed Size */
- ie ClosedUserGrp; /* Closed User Group */
- ie RevChargeInd; /* Reverse Charging Indicator */
- ie CalledNum; /* Called Party Number */
- ie CalledSub; /* Called Party subaddress */
- ie CallingNum; /* Calling Party Number */
- ie CallingSub; /* Calling Party Subaddress */
- ie RedirNum; /* Redirection Number */
- ie TransNetSel; /* Transmit Network Selection */
- ie RestartInd; /* Restart Indicator */
- ie LLComp; /* Low Layer Compatibility */
- ie HLComp; /* High Layer Compatibility */
- ie UserUser; /* User-user */
- ie Escape; /* Escape for extension */
- L3UCHAR buf[1]; /* Buffer for IE's */
-
-}Q931mes_Generic;
-
-/*****************************************************************************
-
- Struct: Q931mes_Alerting
-
- Description: This message is send by the called party to indicate that
- the phone is ringing.
-
- The message consist of an header that MUST be identical with
- Q931mes_Header, a fixed number of IE flags w/offset, and
- a dynamic buffer storing normalized IE's.
-
-*****************************************************************************/
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie BearerCap; /* Bearer Capability */
- ie ChanID; /* Channel Identification */
- ie ProgInd; /* Progress Indicator */
- ie Display; /* Display */
- ie Signal; /* Signal */
- ie HLComp; /* High Layer Compatibility */
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_Alerting;
-
-/*****************************************************************************
-
- Struct: Q931mes_CallProceeding
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie BearerCap; /* Bearer Capability */
- ie ChanID; /* Channel Identification */
- ie ProgInd; /* Progress Indicator */
- ie Display; /* Display */
- ie HLComp; /* High Layer Compatibility */
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_CallProceeding;
-
-/*****************************************************************************
-
- Struct: Q931mes_Connect
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie BearerCap; /* Bearer Capability */
- ie ChanID; /* Channel Identification */
- ie ProgInd; /* Progress Indicator */
- ie Display; /* Display */
- ie DateTime; /* Date/Time */
- ie Signal; /* Signal */
- ie LLComp; /* Low Layer Compatibility */
- ie HLComp; /* High layer Compatibility */
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_Connect;
-
-/*****************************************************************************
-
- Struct: Q931mes_ConnectAck
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie Display; /* Display */
- ie Signal; /* Signal */
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_ConnectAck;
-
-/*****************************************************************************
-
- Struct: Q931mes_Disconnect
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie Cause; /* Cause */
- ie ProgInd; /* Progress Indicator */
- ie Display; /* Display */
- ie Signal; /* Signal */
-#ifdef Q931_X25_SUPPORT
- ie UserUser; /* User - user. Packed Mode. */
-#endif
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_Disconnect;
-
-/*****************************************************************************
-
- Struct: Q931mes_Information
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie SendComplete; /* Sending Complete */
- ie Display; /* Display */
- ie KeypadFac; /* Keypad facility */
- ie Signal; /* Signal */
- ie CalledNum; /* Called party number */
-#ifdef Q931_X25_SUPPORT
- ie Cause; /* Cause (packed only) */
-#endif
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_Information;
-
-/*****************************************************************************
-
- Struct: Q931mes_Notify
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie BearerCap; /* Bearer Capability */
- ie NotifInd; /* Notification Indicator */
- ie Display; /* Display */
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_Notify;
-
-/*****************************************************************************
-
- Struct: Q931mes_Progress
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie BearerCap; /* Bearer Capability */
- ie Cause; /* Cause */
- ie ProgInd; /* Progress Indicator */
- ie Display; /* Display */
- ie HLComp; /* High Layer Compatibility */
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_Progress;
-
-/*****************************************************************************
-
- Struct: Q931mes_Release
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie Cause; /* Cause */
- ie Display; /* Display */
- ie Signal; /* Signal */
-#ifdef Q931_X25_SUPPORT
- ie UserUser; /* User-User packed mode */
-#endif
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_Release;
-
-/*****************************************************************************
-
- Struct: Q931mes_ReleaseComplete
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie Cause; /* Cause */
- ie Display; /* Display */
- ie Signal; /* Signal */
-#ifdef Q931_X25_SUPPORT
- ie UserUser; /* User-User packed mode */
-#endif
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_ReleaseComplete;
-
-/*****************************************************************************
-
- Struct: Q931mes_Resume
-
-*****************************************************************************/
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie CallID; /* Call Identity */
- L3UCHAR buf[1];
-}Q931mes_Resume;
-
-/*****************************************************************************
-
- Struct: Q931mes_ResumeAck
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie ChanID; /* Channel ID */
- ie Display; /* Display */
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_ResumeAck;
-
-/*****************************************************************************
-
- Struct: Q931mes_ResumeReject
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie Cause; /* Cause */
- ie Display; /* Display */
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_ResumeReject;
-
-/*****************************************************************************
-
- Struct: Q931mes_Segment
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_Segment;
-
-/*****************************************************************************
-
- Struct: Q931mes_Setup
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie SendComplete; /* Sending Complete */
- ie RepeatInd; /* Repeat Indicator */
- ie BearerCap; /* Bearer Capability */
- ie ChanID; /* Channel ID */
- ie ProgInd; /* Progress Indicator */
- ie NetFac; /* Network-specific facilities */
- /* Note: Up to 4 NetFac's may be */
- /* included. */
- ie Display; /* Display */
- ie DateTime; /* Date/Time */
- ie KeypadFac; /* Keypad Facility */
- ie Signal; /* Signal */
- ie CallingNum; /* Calling party number */
- ie CallingSub; /* Calling party sub address */
- ie CalledNum; /* Called party number */
- ie CalledSub; /* Called party sub address */
- ie TransNetSel; /* Transit network selection */
- ie LLRepeatInd; /* Repeat Indicator 2 LLComp */
- ie LLComp; /* Low layer compatibility */
- ie HLComp; /* High layer compatibility */
-
-#ifdef Q931_X25_SUPPORT
- /* Packed mode additions */
- ie IndoRate; /* Information Rate */
- ie EndEndDelay; /* End-end transit delay */
- ie TransDelayInd; /* TRansit delay selection and ind. */
- ie PackParam; /* Packed layer binary parameters */
- ie PackWinSize; /* Packed layer window size */
- ie PackSize; /* Packet Size */
- ie ClosedUserGrp; /* Closed User Group */
- ie RevChargInd; /* Reverse charhing indicator */
- ie RedirNum; /* Redirection number */
- ie UserUser; /* User-user. */
-#endif
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_Setup;
-
-/*****************************************************************************
-
- Struct: Q931mes_SetupAck
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie ChanID; /* Channel ID */
- ie ProgInd; /* Progress Indicator */
- ie Display; /* Display */
- ie Signal; /* Signal */
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_SetupAck;
-
-/*****************************************************************************
-
- Struct: Q931mes_Status
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie Cause; /* Cause */
- ie CallState; /* Call State */
- ie Display; /* Display */
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_Status;
-
-/*****************************************************************************
-
- Struct: Q931mes_StatusEnquire
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie Display; /* Display */
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_StatusEnquiry;
-
-/*****************************************************************************
-
- Struct: Q931mes_Suspend
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie CallID; /* Call Identity */
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_Suspend;
-
-/*****************************************************************************
-
- Struct: Q931mes_SuspendAck
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie Display; /* Display */
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_SuspendAck;
-
-/*****************************************************************************
-
- Struct: Q931mes_SuspendReject
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie Cause; /* Cause */
- ie Display; /* Display */
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_SuspendReject;
-
-/*****************************************************************************
-
- Struct: Q931mes_CongestionControl
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie CongLevel; /* Congestion level */
- ie Cause; /* Cause */
- ie Display; /* Display */
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_CongestionControl;
-
-/*****************************************************************************
-
- Struct: Q931mes_UserInformation
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie MoreData; /* More data */
- ie UserUser; /* User-user */
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_UserInformation;
-
-/*****************************************************************************
-
- Struct: Q931mes_Restart
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie ChanID; /* Channel identification */
- ie Display; /* Display */
- ie RestartInd; /* Restart indicator */
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_Restart;
-
-/*****************************************************************************
-
- Struct: Q931mes_RestartAck
-
-*****************************************************************************/
-
-typedef struct
-{
- L3UINT Size; /* Size of message in bytes */
- L3UCHAR ProtDisc; /* Protocol Discriminator */
- L3UCHAR MesType; /* Message type */
- L3INT CRV; /* Call reference value */
- ie ChanID; /* Channel identification */
- ie Display; /* Display */
- ie RestartWin; /* Restart Window */
- ie RestartInd; /* Restart Indicator */
- L3UCHAR buf[1]; /* Dynamic buffer */
-}Q931mes_RestartAck;
-
-/*****************************************************************************
-
- Struct: Q931_TrunkInfo
-
- Description: TrunkInfo is the struct entry used to store Q.931 related
- information and state for E1/T1/J1 trunks and assosiated
- channels in the system.
-
- The user should store this information outside this stack
- and need to feed the interface functions with a pointer to
- the trunk Info entry.
-
-*****************************************************************************/
-
-typedef struct
-{
- enum _NetUser /* Network/User Mode. */
- {
- Q931_TE=0, /* 0 : User Mode */
- Q931_NT=1 /* 1 : Network Mode */
- }NetUser;
-
- L3UCHAR Dialect; /* Q.931 Based dielact index. */
-
- enum _TrunkType /* Trunk Line Type. */
- {
- Q931_TrType_E1=0, /* 0 : E1 Trunk */
- Q931_TrType_T1=1, /* 1 : T1 Trunk */
- Q931_TrType_J1=2, /* 2 : J1 Trunk */
- Q931_TrType_BRI=3 /* 3 : BRI Trunk */
- }TrunkType;
-
- L3UCHAR Enabled; /* Enabled/Disabled */
- /* 0 = Disabled */
- /* 1 = Enabled */
-
- enum _TrState /* Trunk State */
- {
- Q931_TrState_NoAlignment=0, /* Trunk not aligned */
- Q931_TrState_Aligning=1, /* Aligning in progress */
- Q931_TrState_Aligned=2 /* Trunk Aligned */
- }TrunkState;
-
- L3INT LastCRV; /* Last used crv for the trunk. */
-
- L3UCHAR L3Buf[Q931L4BUF]; /* message buffer for messages to be */
- /* send from Q.931 L4. */
-
- L3UCHAR L2Buf[Q931L2BUF]; /* buffer for messages send to L2. */
-
- /* The auto flags below switch on/off automatic Ack messages. SETUP ACK */
- /* as an example can be send by the stack in response to SETUP to buy */
- /* time in processing on L4. Setting this to true will cause the stack */
- /* to automatically send this. */
-
- L3BOOL autoSetupAck; /* Indicate if the stack should send */
- /* SETUP ACK or not. 0=No, 1 = Yes. */
-
- L3BOOL autoConnectAck; /* Indicate if the stack should send */
- /* CONNECT ACT or not. 0=No, 1=Yes. */
-
- L3BOOL autoRestartAck; /* Indicate if the stack should send */
- /* RESTART ACK or not. 0=No, 1=Yes. */
-
- /* channel array holding info per channel. Usually defined to 32 */
- /* channels to fit an E1 since T1/J1 and BRI will fit inside a E1. */
- struct _charray
- {
- enum _ChanType{
- Q931_ChType_NotUsed=0, /* Unused Channel */
- Q931_ChType_B=1, /* B Channel (Voice) */
- Q931_ChType_D=2, /* D Channel (Signalling) */
- Q931_ChType_Sync=3 /* Sync Channel */
- }ChanType;
-
- L3UCHAR Available; /* Channel Available Flag */
- /* 0 : Avaiabled */
- /* 1 : Used */
-
- L3INT CRV; /* Associated CRV */
-
- }ch[Q931MAXCHPERTRUNK];
-
- /* Active Call information indentified by CRV. See Q931AllocateCRV for */
- /* initialization of call table. */
- struct _ccarray
- {
- L3UCHAR InUse; /* Indicate if entry is in use. */
- /* 0 = Not in Use */
- /* 1 = Active Call. */
-
- L3UCHAR BChan; /* Associated B Channel. */
- /* 0 - 31 valid B chan */
- /* 255 = Not allocated */
-
- L3INT CRV; /* Associated CRV. */
-
- L3UINT State; /* Call State. */
- /* 0 is Idle, but other values are */
- /* defined per dialect. */
- /* Default usage is 1-99 for TE and */
- /* 101 - 199 for NT. */
-
- L3ULONG Timer; /* Timer in ms. The TimeTick will check */
- /* if this has exceeded the timeout, and*/
- /* if so call the timers timeout proc. */
-
- L3USHORT TimerID; /* Timer Identification/State */
- /* actual values defined by dialect */
- /* 0 : No timer running */
- /* ITU-T Q.931:301 - 322 Timer running */
-
- }call[Q931MAXCALLPERTRUNK];
-
-}Q931_TrunkInfo;
-
-/*****************************************************************************
-
- Struct: Q931State
-
- Description: Define a Q931 State, legal events and next state for each
- event. Used to simplify the state engine logic. Each state
- engine define it's own state table and the logic only need
- to call a helper function to check if the message is legal
- at this stage.
-
-*****************************************************************************/
-typedef struct
-{
- L3INT State;
- L3INT Message;
- L3UCHAR Direction;
-}Q931State;
-
-/*****************************************************************************
-
- Proc table external references.
-
- The proc tables are defined in Q931.c and initialized in Q931Initialize.
-
-*****************************************************************************/
-extern L3INT (*Q931Proc [Q931MAXDLCT][Q931MAXMES]) (Q931_TrunkInfo *pTrunk, L3UCHAR *,L3INT);
-
-extern L3INT (*Q931Umes [Q931MAXDLCT][Q931MAXMES]) (Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT IOff, L3INT Size);
-extern L3INT (*Q931Pmes [Q931MAXDLCT][Q931MAXMES]) (Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-
-extern L3INT (*Q931Uie [Q931MAXDLCT][Q931MAXIE] ) (Q931_TrunkInfo *pTrunk,ie *pIE,L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-extern L3INT (*Q931Pie [Q931MAXDLCT][Q931MAXIE] ) (Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-
-/*****************************************************************************
-
- Macro: GetIETotoSize
-
- Syntax: L3INT GetIETotSize(InfoElem ie);
-
- Description: Compute the total size in bytes of an info element including
- size of 'header'.
-
-*****************************************************************************/
-#define Q931GetIETotSize(ie) (((ie.InfoID & 0x80) !=0) ? 1:ie.LenIE)+2)
-
-/*****************************************************************************
-
- Macro: IsIEPresent
-
- Syntax: BOOL IsIEPresent(ie InfoElement);
-
- Description: Return TRUE if the Information Element is included.
-
-*****************************************************************************/
-#define Q931IsIEPresent(x) ((x & 0x8000) != 0)
-
-/*****************************************************************************
-
- Macro: GetIEOffset and GetIEValue
-
- Syntax: L3INT GetIEOffset(ie InfoElement)
- L3INT GetIEValue(ie InfoElement)
-
- Description: Returns the offset (or the value )to the Information Element.
-
- Note: GetIEValue assumes that the 15 lsb bit is the value of a
- single octet information element. This macro can not be used
- on a variable information element.
-
-*****************************************************************************/
-#define Q931GetIEOffset(x) (x & 0x7fff)
-#define Q931GetIEValue(x) (x & 0x7fff)
-
-/*****************************************************************************
-
- Macro: Q931GetIEPtr
-
- Syntax: void * Q931GetIEPtr(ie InfoElement, L3UCHAR * Buf);
-
- Description: Compute a Ptr to the information element.
-
-*****************************************************************************/
-#define Q931GetIEPtr(ie,buf) (&buf[Q931GetIEOffset(ie)])
-
-/*****************************************************************************
-
- Macro: SetIE
-
- Syntax: void SetIE(ie InfoElement, L3INT Offset);
-
- Description: Set an information element.
-
-*****************************************************************************/
-#define Q931SetIE(x,o) {x = (ie)(o) | 0x8000;}
-
-/*****************************************************************************
-
- Macro: IsQ931Ext
-
- Syntax BOOL IsQ931Ext(L3UCHAR c)
-
- Description: Return true Check if the msb (bit 8) is 0. This indicate
- that the octet is extended.
-
-*****************************************************************************/
-#define IsQ931Ext(x) ((x&0x80)==0)
-
-/*****************************************************************************
-
- Macro: ieGetOctet
-
- Syntax: unsigned L3UCHAR ieGetOctet(L3INT e)
-
- Description: Macro to fetch one byte from an integer. Mostly used to
- avoid warnings.
-
-*****************************************************************************/
-#define ieGetOctet(x) ((L3UCHAR)(x))
-
-/*****************************************************************************
-
- Macro: NoWarning
-
- Syntax: void NoWarning(x)
-
- Description: Macro to suppress unreferenced formal parameter warnings
-
- Used during creation of the stack since the stack is
- developed for Warning Level 4 and this creates a lot of
- warning for the initial empty functions.
-
-*****************************************************************************/
-#define NoWarning(x) (x=x)
-
-/*****************************************************************************
-
- External references. See Q931.c for details.
-
-*****************************************************************************/
-
-extern Q931_TrunkInfo Q931Trunk[Q931MAXTRUNKS];
-
-#include "Q932.h"
-
-/*****************************************************************************
-
- Q.931 Information Element Pack/Unpack functions. Implemented in Q931ie.c
-
-*****************************************************************************/
-
-L3INT Q931Pie_BearerCap(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_ChanID(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_ProgInd(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_Display(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_Signal(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_HLComp(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_Segment(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_DateTime(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_Cause(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_SendComplete(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_KeypadFac(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_NotifInd(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_CallID(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_RepeatInd(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_NetFac(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_CallingNum(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_CallingSub(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_CalledNum(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_CalledSub(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_CalledNum(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_TransNetSel(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_LLComp(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_CallState(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_RestartInd(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-L3INT Q931Pie_UserUser(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);
-
-L3INT Q931Uie_BearerCap(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3USHORT Q931Uie_CRV(Q931_TrunkInfo *pTrunk,L3UCHAR * IBuf, L3UCHAR *OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_ChanID(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR *OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_ProgInd(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_Display(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_Signal(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_HLComp(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_Segment(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_DateTime(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_Cause(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_SendComplete(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_KeypadFac(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_NotifInd(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_CallID(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_RepeatInd(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_NetFac(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_CallingNum(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_CallingSub(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_CalledNum(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_CalledSub(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_TransNetSel(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_LLComp(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_CallState(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_RestartInd(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-L3INT Q931Uie_UserUser(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);
-
-/*****************************************************************************
-
- Q.931 Message Pack/Unpack functions. Implemented in Q931mes.c
-
-*****************************************************************************/
-L3INT Q931Pmes_Alerting(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_CallProceeding(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_Connect(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_ConnectAck(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_Progress(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_Setup(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_SetupAck(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_Resume(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_ResumeAck(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_ResumeReject(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_Suspend(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_SuspendAck(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_SuspendReject(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_UserInformation(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_Disconnect(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_Release(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_ReleaseComplete(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_Restart(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_RestartAck(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_CongestionControl(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_Information(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_Notify(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_Segment(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_Status(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-L3INT Q931Pmes_StatusEnquiry(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);
-
-L3INT Q931Umes_Alerting(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_CallProceeding(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_Connect(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_ConnectAck(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_Progress(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_Setup(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_SetupAck(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_Resume(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_ResumeAck(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_ResumeReject(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_Suspend(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_SuspendAck(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_SuspendReject(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_UserInformation(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_Disconnect(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_Release(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_ReleaseComplete(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_Restart(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_RestartAck(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_CongestionControl(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_Information(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_Notify(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_Segment(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_Status(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-L3INT Q931Umes_StatusEnquiry(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);
-
-/*****************************************************************************
-
- Q.931 Process Function Prototyping. Implemented in Q931StateTE.c
-
-*****************************************************************************/
-L3INT Q931ProcAlertingTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcCallProceedingTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcConnectTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcConnectAckTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcProgressTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcSetupTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcSetupAckTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcResumeTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcResumeAckTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcResumeRejectTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcSuspendTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcSuspendAckTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcSuspendRejectTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcUserInformationTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcDisconnectTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcReleaseTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcReleaseCompleteTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcRestartTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcRestartAckTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcCongestionControlTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcInformationTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcNotifyTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcStatusTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcStatusEnquiryTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcSegmentTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-
-L3INT Q931ProcAlertingNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcCallProceedingNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcConnectNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcConnectAckNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcProgressNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcSetupNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcSetupAckNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcResumeNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcResumeAckNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcResumeRejectNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcSuspendNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcSuspendAckNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcSuspendRejectNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcUserInformationNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcDisconnectNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcReleaseNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcReleaseCompleteNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcRestartNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcRestartAckNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcCongestionControlNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcInformationNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcNotifyNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcStatusNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcStatusEnquiryNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcSegmentNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-
-L3INT Q931ProcUnknownMessage(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-L3INT Q931ProcUnexpectedMessage(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);
-
-/*****************************************************************************
-
- Interface Function Prototypes. Implemented in Q931.c
-
-*****************************************************************************/
-void Q931TimeTick(L3ULONG ms);
-L3INT Q931Rx23(Q931_TrunkInfo *pTrunk, L3UCHAR * Mes, L3INT Size);
-L3INT Q931Tx32(Q931_TrunkInfo *pTrunk, L3UCHAR * Mes, L3INT Size);
-L3INT Q931Rx43(Q931_TrunkInfo *pTrunk, L3UCHAR * Mes, L3INT Size);
-L3INT Q931Tx34(Q931_TrunkInfo *pTrunk, L3UCHAR * Mes, L3INT Size);
-void Q931SetError(Q931_TrunkInfo *pTrunk,L3INT ErrID, L3INT ErrPar1, L3INT ErrPar2);
-void Q931SetTx34CB(L3INT (*Q931Tx34Par)(Q931_TrunkInfo *pTrunk,L3UCHAR * Mes, L3INT Size));
-void Q931SetTx32CB(L3INT (*Q931Tx32Par)(Q931_TrunkInfo *pTrunk,L3UCHAR * Mes, L3INT Size));
-void Q931SetErrorCB(L3INT (*Q931ErrorPar)(Q931_TrunkInfo *pTrunk,L3INT,L3INT,L3INT));
-void Q931CreateTE(L3UCHAR i);
-void Q931CreateNT(L3UCHAR i);
-void Q931SetMesCreateCB(L3INT (*callback)());
-void Q931SetDialectCreateCB(L3INT (*callback)(L3INT));
-void Q931SetHeaderSpace(L3INT space);
-void Q931SetMesProc(L3UCHAR mes, L3UCHAR dialect,
- L3INT (*Q931ProcFunc)(Q931_TrunkInfo *pTrunk, L3UCHAR * b, L3INT iFrom),
- L3INT (*Q931UmesFunc)(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT IOff, L3INT Size),
- L3INT (*Q931PmesFunc)(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize));
-
-void Q931SetIEProc(L3UCHAR iec, L3UCHAR dialect,
- L3INT (*Q931PieProc)(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet),
- L3INT (*Q931UieProc)(Q931_TrunkInfo *pTrunk, ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff));
-
-void Q931Initialize();
-void Q931AddDialect(L3UCHAR iDialect, void (*Q931CreateDialectCB)(L3UCHAR iDialect));
-L3INT Q931InitMesSetup(Q931mes_Setup *p);
-
-L3INT Q931CreateCRV(Q931_TrunkInfo *pTrunk, L3INT * callIndex);
-L3INT Q931AllocateCRV(Q931_TrunkInfo *pTrunk, L3INT iCRV, L3INT * callIndex);
-L3INT Q931FindCRV(Q931_TrunkInfo *pTrunk, L3INT crv, L3INT *callindex);
-L3INT Q931GetCallState(Q931_TrunkInfo *pTrunk, L3INT iCRV);
-L3INT Q931StartTimer(Q931_TrunkInfo *pTrunk, L3INT callIndex, L3USHORT iTimer);
-L3INT Q931StopTimer(Q931_TrunkInfo *pTrunk, L3INT callindex, L3USHORT iTimer);
-L3INT Q931SetState(Q931_TrunkInfo *pTrunk, L3INT callIndex, L3INT iState);
-L3ULONG Q931GetTime();
-void Q931AddStateEntry(L3UCHAR iD, L3INT iState, L3INT iMes, L3UCHAR cDir);
-L3BOOL Q931IsEventLegal(L3UCHAR iD, L3INT iState, L3INT iMes, L3UCHAR cDir);
-
-/*****************************************************************************
-
- Q.931 Low Level API Function Prototyping. Implemented in Q931API.c
-
-*****************************************************************************/
-ie Q931AppendIE(L3UCHAR *pm, L3UCHAR *pi);
-L3INT Q931GetUniqueCRV(Q931_TrunkInfo *pTrunk);
-
-L3INT Q931InitIEBearerCap(Q931ie_BearerCap *p);
-L3INT Q931InitIEChanID(Q931ie_ChanID *p);
-L3INT Q931InitIEProgInd(Q931ie_ProgInd *p);
-L3INT Q931InitIENetFac(Q931ie_NetFac * pIE);
-L3INT Q931InitIEDisplay(Q931ie_Display * pIE);
-L3INT Q931InitIEDateTime(Q931ie_DateTime * pIE);
-L3INT Q931InitIEKeypadFac(Q931ie_KeypadFac * pIE);
-L3INT Q931InitIESignal(Q931ie_Signal * pIE);
-L3INT Q931InitIECallingNum(Q931ie_CallingNum * pIE);
-L3INT Q931InitIECallingSub(Q931ie_CallingSub * pIE);
-L3INT Q931InitIECalledNum(Q931ie_CalledNum * pIE);
-L3INT Q931InitIECalledSub(Q931ie_CalledSub * pIE);
-L3INT Q931InitIETransNetSel(Q931ie_TransNetSel * pIE);
-L3INT Q931InitIELLComp(Q931ie_LLComp * pIE);
-L3INT Q931InitIEHLComp(Q931ie_HLComp * pIE);
-
-L3INT Q931Disconnect(Q931_TrunkInfo *pTrunk, L3INT iTo, L3INT iCRV, L3INT iCause);
-L3INT Q931ReleaseComplete(Q931_TrunkInfo *pTrunk, L3INT iTo);
-
-#endif /* _Q931_NL */
+/******************************************************************************\r
+\r
+ FileName: Q931.h\r
+\r
+ Contents: Header and definition for the ITU-T Q.931 stack. The \r
+ header contents the following parts:\r
+\r
+ - Definition of codes\r
+ - Definition of information elements (Q931ie_).\r
+ - Definition of messages (Q931mes_).\r
+ - Definitian of variables (var_).\r
+ - Function prototypes.\r
+\r
+ Description: The Q.931 stack provided here covers ITU-T Q.931 w/Q.932\r
+ supplementary services for both PRI, BRI and variants. \r
+ The stack is generic and designed to deal with variants as\r
+ needed.\r
+\r
+ The stack uses the following interface functions:\r
+\r
+ - Q931Initialize Initialize the Q.931 stack.\r
+ - Q931Rx23 Receive a message from layer 2\r
+ - Q931Tx32 Send a message to layer 2\r
+ - Q931Rx43 Receive a message from layer 4 or above.\r
+ - Q931Tx34 Send a message to layer 4 or above.\r
+ - Q931TimeTick Periodical timer processing.\r
+ - Q931ErrorProc Callback for stack error message.\r
+\r
+ The protocol is a module with no external dependencies and\r
+ can easely be ported to any operating system like Windows,\r
+ Linux, rtos and others.\r
+\r
+ Related Files: Q931.h Q.931 Definitions\r
+ Q931.c Q.931 Interface Functions.\r
+ Q931api.c Low level L4 API functions.\r
+\r
+ Q932.h Q.932 Suplementary Services\r
+ Q932mes.c Q.932 encoders/coders\r
+\r
+ Q931mes.c Q.931 Message encoders/coders\r
+ Q931ie.c Q.931 IE encoders/coders\r
+ Q931StateTE.c Generic Q.931 TE State Engine\r
+ Q931StateNT.c Generic Q.931 NT State Engine\r
+\r
+ Design Note 1: For each variant please add separate files starting with \r
+ the variant short-name as follows:\r
+\r
+ <variant>.h Spesific headers needed.\r
+ <variant>mes.c Message encoders/decores.\r
+ <variant>ie.c IE encoders/decoders.\r
+ <variant>StateTE.c TE side state engine.\r
+ <variant>StateNT.c NT side state engine.\r
+\r
+ Design Note 2: The stack is deliberatly made non-threading. Use 1 \r
+ thread per Trunk, but lock access from the timertick\r
+ and rx, tx functions. And make sure the callbacks only\r
+ dump messages to a queue, no time-consuming processing\r
+ inside stack processing. \r
+\r
+ All stack processing is async 'fire and forget', meaning\r
+ that there are not, and should not be any time-consuming\r
+ processing within the stack-time. The best way to thread \r
+ a stack is to use one single thread that signal 5 queues.\r
+ \r
+ - Incoming L2 queue.\r
+ - Incoming L4 queue.\r
+ - Outgoing L2 queue.\r
+ - Outgoing L4 queue.\r
+ - Error/Trace queue.\r
+\r
+ Design Note 3: DSP optimization. The L3 (Rx23) can be called directly\r
+ from a hdlc receiver without usage of queues for optimized \r
+ processing. But keep in mind that Q.931 calls Tx34 or Tx32 \r
+ as part of receiving a message from Layer 2.\r
+\r
+ License/Copyright:\r
+\r
+ Copyright (c) 2007, Jan Vidar Berger, Case Labs, Ltd. All rights reserved.\r
+ email:janvb@caselaboratories.com \r
+\r
+ Redistribution and use in source and binary forms, with or without \r
+ modification, are permitted provided that the following conditions are \r
+ met:\r
+\r
+ * Redistributions of source code must retain the above copyright notice, \r
+ this list of conditions and the following disclaimer.\r
+ * Redistributions in binary form must reproduce the above copyright notice, \r
+ this list of conditions and the following disclaimer in the documentation \r
+ and/or other materials provided with the distribution.\r
+ * Neither the name of the Case Labs, Ltd nor the names of its contributors \r
+ may be used to endorse or promote products derived from this software \r
+ without specific prior written permission.\r
+\r
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" \r
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE \r
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE \r
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE \r
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR \r
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF \r
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS \r
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN \r
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) \r
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE \r
+ POSSIBILITY OF SUCH DAMAGE.\r
+******************************************************************************/\r
+\r
+#ifndef _Q931_NL\r
+#define _Q931_NL\r
+\r
+/* uncomment the #define below to add x.25 support to the Q.931 */\r
+/* #define Q931_X25_SUPPORT */\r
+\r
+#include "stdio.h"\r
+\r
+#ifdef _MSC_VER\r
+#pragma warning(disable:4100)\r
+#endif\r
+\r
+/*****************************************************************************\r
+\r
+ Error Codes\r
+\r
+*****************************************************************************/\r
+#define Q931E_NO_ERROR 0\r
+#define Q931E_UNKNOWN_MESSAGE -3001\r
+#define Q931E_ILLEGAL_IE -3002\r
+#define Q931E_UNKNOWN_IE -3003\r
+#define Q931E_BEARERCAP -3004\r
+#define Q931E_HLCOMP -3005\r
+#define Q931E_LLCOMP -3006\r
+#define Q931E_INTERNAL -3007\r
+#define Q931E_MISSING_CB -3008\r
+#define Q931E_UNEXPECTED_MESSAGE -3009\r
+#define Q931E_ILLEGAL_MESSAGE -3010\r
+#define Q931E_TOMANYCALLS -3011\r
+#define Q931E_INVALID_CRV -3012\r
+#define Q931E_CALLID -3013\r
+#define Q931E_CALLSTATE -3014\r
+#define Q931E_CALLEDSUB -3015\r
+#define Q931E_CALLEDNUM -3016\r
+#define Q931E_CALLINGNUM -3017\r
+#define Q931E_CALLINGSUB -3018\r
+#define Q931E_CAUSE -3019\r
+#define Q931E_CHANID -3020\r
+#define Q931E_DATETIME -3021\r
+#define Q931E_DISPLAY -3022\r
+#define Q931E_KEYPADFAC -3023\r
+#define Q931E_NETFAC -3024\r
+#define Q931E_NOTIFIND -3025\r
+#define Q931E_PROGIND -3026\r
+#define Q931E_RESTARTIND -3027\r
+#define Q931E_SEGMENT -3028\r
+#define Q931E_SIGNAL -3029\r
+\r
+/*****************************************************************************\r
+\r
+ Some speed optimization can be achieved by changing all variables to the \r
+ word size of your processor. A 32 bit processor have to do a lot of extra \r
+ work to read a packed 8 bit integer. Changing all fields to 32 bit integer \r
+ will ressult in usage of some extra space, but speed up the stack.\r
+\r
+ The stack have been designed to allow L3UCHAR etc. to be any size of 8 bit\r
+ or larger.\r
+\r
+*****************************************************************************/\r
+\r
+#define L3UCHAR unsigned char /* Min 8 bit */\r
+#define L3USHORT unsigned short /* Min 16 bit unsigned */\r
+#define L3UINT unsigned int /* Min 16 bit unsigned */\r
+#define L3INT int /* Min 16 bit signed */\r
+#define L3ULONG unsigned long /* Min 32 bit */\r
+#define L3BOOL char /* Min 1 bit, valuse 0 & 1 only */\r
+\r
+#define L3TRUE 1\r
+#define L3FALSE 0 \r
+\r
+/*****************************************************************************\r
+ \r
+ MAXTRUNKS sets how many physical trunks this system might have. This \r
+ number should be keept at a minimum since it will use global space.\r
+\r
+ It is recommended that you leave MAXCHPERTRUNK as is\r
+\r
+*****************************************************************************/\r
+\r
+#define Q931L4BUF 1000 /* size of message buffer */\r
+\r
+#define Q931L2BUF 300 /* size of message buffer */\r
+\r
+#define Q931MAXTRUNKS 4 /* Total number of trunks that will be */\r
+ /* processed by this instance of the */\r
+ /* stack */\r
+\r
+#define Q931MAXCHPERTRUNK 32 /* Number of channels per trunk. The */\r
+ /* stack uses a static set of 32 */\r
+ /* channels regardless if it is E1, T1 */\r
+ /* or BRI that actually is used. */\r
+\r
+#define Q931MAXCALLPERTRUNK (Q931MAXCHPERTRUNK * 2)\r
+ /* Number of max active CRV per trunk. */\r
+ /* Q.931 can have more calls than there */\r
+ /* are channels. */\r
+\r
+/*****************************************************************************\r
+\r
+ The following defines control the dialect switch tables and should only be\r
+ changed when a new dialect needs to be inserted into the stack. \r
+\r
+ This stack uses an array of functions to know which function to call as \r
+ it receives a SETUP message etc. A new dialect can when schoose to use\r
+ the proc etc for standard Q.931 or insert a modified proc.\r
+\r
+ This technique has also been used to distinguish between user and network\r
+ mode to make the code as easy to read and maintainable as possible.\r
+\r
+ A message and IE index have been used to save space. These indexes allowes\r
+ the message or IE code to be used directly and will give back a new index\r
+ into the table.\r
+\r
+*****************************************************************************/\r
+\r
+/* WARNING! Initialize Q931CreateDialectCB[] will NULL when increasing the */\r
+/* Q931MAXDLCT value to avoid Q931Initialize from crashing if one entry is */\r
+/* not used. */\r
+#define Q931MAXDLCT 2 /* Max dialects included in this */\r
+ /* compile. User and Network count as */\r
+ /* one dialect each. */\r
+\r
+\r
+#define Q931MAXMES 255 /* Number of messages */\r
+\r
+#define Q931MAXIE 255 /* Number of IE */\r
+\r
+#define Q931MAXSTATE 100 /* Size of state tables */\r
+\r
+/*****************************************************************************\r
+\r
+ Call States for ITU-T Q.931 TE (User Mode)\r
+\r
+*****************************************************************************/\r
+\r
+#define Q931_U0 0\r
+#define Q931_U1 1\r
+#define Q931_U2 2\r
+#define Q931_U3 3\r
+#define Q931_U4 4\r
+#define Q931_U6 6\r
+#define Q931_U7 7\r
+#define Q931_U8 8\r
+#define Q931_U9 9\r
+#define Q931_U10 10\r
+#define Q931_U11 11\r
+#define Q931_U12 12\r
+#define Q931_U15 15\r
+#define Q931_U17 17\r
+#define Q931_U19 19\r
+#define Q931_U25 25\r
+\r
+/*****************************************************************************\r
+\r
+ Call States for ITU-T Q.931 NT (Network Mode)\r
+\r
+*****************************************************************************/\r
+#define Q931_N0 (0x0100 | 0)\r
+#define Q931_N1 (0x0100 | 1)\r
+#define Q931_N2 (0x0100 | 2)\r
+#define Q931_N3 (0x0100 | 3)\r
+#define Q931_N4 (0x0100 | 4)\r
+#define Q931_N6 (0x0100 | 6)\r
+#define Q931_N7 (0x0100 | 7)\r
+#define Q931_N8 (0x0100 | 8)\r
+#define Q931_N9 (0x0100 | 9)\r
+#define Q931_N10 (0x0100 | 11)\r
+#define Q931_N11 (0x0100 | 11)\r
+#define Q931_N12 (0x0100 | 12)\r
+#define Q931_N15 (0x0100 | 15)\r
+#define Q931_N17 (0x0100 | 17)\r
+#define Q931_N19 (0x0100 | 19)\r
+#define Q931_N22 (0x0100 | 22)\r
+#define Q931_N25 (0x0100 | 25)\r
+\r
+/*****************************************************************************\r
+\r
+ Q.931 Message codes\r
+ \r
+*****************************************************************************/\r
+\r
+#define Q931mes_ALERTING 0x01 /* 0000 0001 */ \r
+#define Q931mes_CALL_PROCEEDING 0x02 /* 0000 0010 */\r
+#define Q931mes_CONNECT 0x07 /* 0000 0111 */\r
+#define Q931mes_CONNECT_ACKNOWLEDGE 0x0f /* 0000 1111 */\r
+#define Q931mes_PROGRESS 0x03 /* 0000 0011 */\r
+#define Q931mes_SETUP 0x05 /* 0000 0101 */\r
+#define Q931mes_SETUP_ACKNOWLEDGE 0x0d /* 0000 1101 */\r
+#define Q931mes_RESUME 0x26 /* 0010 0110 */\r
+#define Q931mes_RESUME_ACKNOWLEDGE 0x2e /* 0010 1110 */\r
+#define Q931mes_RESUME_REJECT 0x22 /* 0010 0010 */\r
+#define Q931mes_SUSPEND 0x25 /* 0010 0101 */\r
+#define Q931mes_SUSPEND_ACKNOWLEDGE 0x2d /* 0010 1101 */\r
+#define Q931mes_SUSPEND_REJECT 0x21 /* 0010 0001 */\r
+#define Q931mes_USER_INFORMATION 0x20 /* 0010 0000 */\r
+#define Q931mes_DISCONNECT 0x45 /* 0100 0101 */\r
+#define Q931mes_RELEASE 0x4d /* 0100 1101 */\r
+#define Q931mes_RELEASE_COMPLETE 0x5a /* 0101 1010 */\r
+#define Q931mes_RESTART 0x46 /* 0100 0110 */\r
+#define Q931mes_RESTART_ACKNOWLEDGE 0x4e /* 0100 1110 */\r
+#define Q931mes_CONGESTION_CONTROL 0x79 /* 0111 1001 */\r
+#define Q931mes_INFORMATION 0x7a /* 0111 1011 */\r
+#define Q931mes_NOTIFY 0x6e /* 0110 1110 */\r
+#define Q931mes_STATUS 0x7d /* 0111 1101 */\r
+#define Q931mes_STATUS_ENQUIRY 0x75 /* 0111 0101 */\r
+#define Q931mes_SEGMENT 0x60 /* 0110 0000 */\r
+\r
+\r
+/* Single octet information elements */\r
+#define Q931ie_SHIFT 0x90 /* 1001 ---- */\r
+#define Q931ie_MORE_DATA 0xa0 /* 1010 ---- */\r
+#define Q931ie_SENDING_COMPLETE 0xa1 /* 1010 0000 */\r
+#define Q931ie_CONGESTION_LEVEL 0xb0 /* 1011 ---- */\r
+#define Q931ie_REPEAT_INDICATOR 0xd0 /* 1101 ---- */\r
+\r
+/* Variable Length Information Elements */\r
+#define Q931ie_SEGMENTED_MESSAGE 0x00 /* 0000 0000 */\r
+#define Q931ie_BEARER_CAPABILITY 0x04 /* 0000 0100 */\r
+#define Q931ie_CAUSE 0x08 /* 0000 1000 */\r
+#define Q931ie_CALL_IDENTITY 0x10 /* 0001 0000 */\r
+#define Q931ie_CALL_STATE 0x14 /* 0001 0100 */\r
+#define Q931ie_CHANNEL_IDENTIFICATION 0x18 /* 0001 1000 */\r
+#define Q931ie_PROGRESS_INDICATOR 0x1e /* 0001 1110 */\r
+#define Q931ie_NETWORK_SPECIFIC_FACILITIES 0x20 /* 0010 0000 */\r
+#define Q931ie_NOTIFICATION_INDICATOR 0x27 /* 0010 0111 */\r
+#define Q931ie_DISPLAY 0x28 /* 0010 1000 */\r
+#define Q931ie_DATETIME 0x29 /* 0010 1001 */\r
+#define Q931ie_KEYPAD_FACILITY 0x2c /* 0010 1100 */\r
+#define Q931ie_SIGNAL 0x34 /* 0011 0100 */\r
+#define Q931ie_SWITCHOOK 0x36 /* 0011 0110 */\r
+#define Q931ie_FEATURE_ACTIVATION 0x38 /* 0011 1000 */\r
+#define Q931ie_FEATURE_INDICATION 0x39 /* 0011 1001 */\r
+#define Q931ie_INFORMATION_RATE 0x40 /* 0100 0000 */\r
+#define Q931ie_END_TO_END_TRANSIT_DELAY 0x42 /* 0100 0010 */\r
+#define Q931ie_TRANSIT_DELAY_SELECTION_AND_IND 0x43 /* 0100 0011 */\r
+#define Q931ie_PACKED_LAYER_BIMARY_PARAMETERS 0x44 /* 0100 0100 */\r
+#define Q931ie_PACKED_LAYER_WINDOW_SIZE 0x45 /* 0100 0101 */\r
+#define Q931ie_PACKED_SIZE 0x46 /* 0100 0110 */\r
+#define Q931ie_CALLING_PARTY_NUMBER 0x6c /* 0110 1100 */\r
+#define Q931ie_CALLING_PARTY_SUBADDRESS 0x6d /* 0110 1101 */\r
+#define Q931ie_CALLED_PARTY_NUMBER 0x70 /* 0111 0000 */\r
+#define Q931ie_CALLED_PARTY_SUBADDRESS 0x71 /* 0111 0001 */\r
+#define Q931ie_REDIRECTING_NUMBER 0x74 /* 0111 0100 */\r
+#define Q931ie_TRANSIT_NETWORK_SELECTION 0x78 /* 0111 1000 */\r
+#define Q931ie_RESTART_INDICATOR 0x79 /* 0111 1001 */\r
+#define Q931ie_LOW_LAYER_COMPATIBILITY 0x7c /* 0111 1100 */\r
+#define Q931ie_HIGH_LAYER_COMPATIBILITY 0x7d /* 0111 1101 */\r
+#define Q931ie_USER_USER 0x7e /* 0111 1110 */\r
+#define Q931ie_ESCAPE_FOR_EX 0x7f /* 0111 1111 */\r
+\r
+/*****************************************************************************\r
+\r
+ Global defines.\r
+\r
+*****************************************************************************/\r
+\r
+typedef L3USHORT ie; /* Special data type to hold a dynamic */\r
+ /* or optional information element as */\r
+ /* part of a message struct. MSB = 1 */\r
+ /* indicate that the ie is present, the */\r
+ /* last 15 bits is an offset ( or the */\r
+ /* value for single octet ) to the */\r
+ /* struct holding the ie. Offset = 0 */\r
+ /* is buf[1] etc. */\r
+ /* ie == 0xffff indicate error */\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_BearerCap\r
+\r
+ Description: Bearer Capability Information Element.\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 00000100 for Bearer Capability */\r
+ \r
+ L3UCHAR Size; /* Length of Information Element */\r
+\r
+ L3UCHAR CodStand; /* Coding Standard. */\r
+ /* 00 - ITU-T */\r
+ /* 01 - ISO/IEC */\r
+ /* 10 - National standard */\r
+ /* 11 - Network side spesific */\r
+\r
+ L3UCHAR ITC; /* Information Transfer Capability */\r
+ /* 00000 - Speech */\r
+ /* 01000 - Unrestricted digital info */\r
+ /* 01001 - Restricted digital info */\r
+ /* 10000 - 3.1 kHz audio */\r
+ /* 10001 - Unrestricted with tones */\r
+ /* 11000 - Video */\r
+\r
+ L3UCHAR TransMode; /* Transfer Mode. */\r
+ /* 00 - Circuit mode */\r
+ /* 10 - Packet mode */\r
+\r
+ L3UCHAR ITR; /* Information Transfer Rate. */\r
+ /* 00000 - Packed mode */\r
+ /* 10000 - 64 kbit/s */\r
+ /* 10001 - 2 x 64 kbit/s */\r
+ /* 10011 - 384 kbit/s */\r
+ /* 10101 - 1536 kbit/s */\r
+ /* 10111 - 1920 kbit/s */\r
+ /* 11000 - Multirat (64 kbit/s base) */\r
+\r
+ L3UCHAR RateMul; /* Rate Multiplier */\r
+\r
+ L3UCHAR Layer1Ident; /* Layer 1 Ident. */\r
+\r
+ L3UCHAR UIL1Prot; /* User Information Layer 1 Protocol */\r
+ /* 00001 : ITU-T V.110, I.460 and X.30 */\r
+ /* 00010 : G.711 my-law */\r
+ /* 00011 : G.711 A-law */\r
+ /* 00100 : G.721 */\r
+ /* 00101 : H.221 and H.242 */\r
+ /* 00110 : H.223 and H.245 */\r
+ /* 00111 : Non ITU-T Standard */\r
+ /* 01000 : ITU-T V.120 */\r
+ /* 01001 : ITU-T X.31 HDLC flag stuff. */\r
+\r
+ L3UCHAR SyncAsync; /* Sync/Async */\r
+ /* 0 : Syncronous data */\r
+ /* 1 : Asyncronous data */\r
+\r
+ L3UCHAR Negot; /* Negotiation */\r
+ /* 0 : In-band negotiation not possib. */\r
+ /* 1 : In-band negotiation possible */\r
+\r
+ L3UCHAR UserRate; /* User rate */\r
+ /* 00000 : I.460, V.110, X,30 */\r
+ /* 00001 : 0.6 kbit/s x.1 */\r
+ /* 00010 : 1.2 kbit/s */\r
+ /* 00011 : 2.4 kbit/s */\r
+ /* 00100 : 3.6 kbit/s */\r
+ /* 00101 : 4.8 kbit/s */\r
+ /* 00110 : 7.2 kbit/s */\r
+ /* 00111 : 8 kbit/s I.460 */\r
+ /* 01000 : 9.6 kbit/s */\r
+ /* 01001 : 14.4 kbit/s */\r
+ /* 01010 : 16 kbit/s */\r
+ /* 01011 : 19.2 kbit/s */\r
+ /* 01100 : 32 kbit/s */\r
+ /* 01101 : 38.4 kbit/s */\r
+ /* 01110 : 48 kbit/s */\r
+ /* 01111 : 56 kbit/s */\r
+ /* 10000 : 57.6 kbit/s */\r
+ /* 10010 : 28.8 kbit/s */\r
+ /* 10100 : 24 kbit/s */\r
+ /* 10101 : 0.1345 kbit/s */\r
+ /* 10110 : 0.100 kbit/s */\r
+ /* 10111 : 0.075/1.2 kbit/s */\r
+ /* 11000 : 1.2/0.075/kbit/s */\r
+ /* 11001 : 0.050 kbit/s */\r
+ /* 11010 : 0.075 kbit/s */\r
+ /* 11011 : 0.110 kbit/s */\r
+ /* 11100 : 0.150 kbit/s */\r
+ /* 11101 : 0.200 kbit/s */\r
+ /* 11110 : 0.300 kbit/s */\r
+ /* 11111 : 12 kbit/s */\r
+\r
+ L3UCHAR InterRate; /* Intermediate Rate */\r
+ /* 00 : Not used */\r
+ /* 01 : 8 kbit/s */\r
+ /* 10 : 16 kbit/s */\r
+ /* 11 : 32 kbit/s */\r
+\r
+ L3UCHAR NIConTx; /* Network Indepentend Clock on transmit*/\r
+ /* 0 : Not required to send data clc */\r
+ /* 1 : Send data w/NIC clc */\r
+\r
+ L3UCHAR NIConRx; /* NIC on Rx */\r
+ /* 0 : Cannot accept indep. clc */\r
+ /* 1 : data with indep. clc accepted */\r
+\r
+ L3UCHAR FlowCtlTx; /* Flow control on Tx */\r
+ /* 0 : Send Flow ctrl not required */\r
+ /* 1 : Send flow ctrl required */\r
+\r
+ L3UCHAR FlowCtlRx; /* Flow control on Rx */\r
+ /* 0 : cannot use receive flow ctrl */\r
+ /* 1 : Receive flow ctrl accepted */\r
+ L3UCHAR HDR; /* HDR/No HDR */\r
+ L3UCHAR MultiFrame; /* Multi frame support */\r
+ /* 0 : multiframe not supported */\r
+ /* 1 : multiframe supported */\r
+\r
+ L3UCHAR Mode; /* Mode of operation */\r
+ /* 0 : bit transparent mode of operat. */\r
+ /* 1 : protocol sesitive mode of op. */\r
+\r
+ L3UCHAR LLInegot; /* Logical link id negotiation (oct. 5b)*/\r
+ /* 0 : default LLI=256 only */\r
+ /* 1 : Full protocol negotiation */\r
+\r
+ L3UCHAR Assignor; /* Assignor/assignee */\r
+ /* 0 : Default Asignee */\r
+ /* 1 : Assignor only */\r
+\r
+ L3UCHAR InBandNeg; /* In-band/out-band negot. */\r
+ /* 0 : negot done w/ USER INFO mes */\r
+ /* 1 : negot done in-band w/link zero */\r
+\r
+ L3UCHAR NumStopBits; /* Number of stop bits */\r
+ /* 00 : Not used */\r
+ /* 01 : 1 bit */\r
+ /* 10 : 1.5 bits */\r
+ /* 11 : 2 bits */\r
+\r
+ L3UCHAR NumDataBits; /* Number of data bits. */\r
+ /* 00 : not used */\r
+ /* 01 : 5 bits */\r
+ /* 10 : 7 bits */\r
+ /* 11 : 8 bits */\r
+\r
+ L3UCHAR Parity; /* Parity Information */\r
+ /* 000 : Odd */\r
+ /* 010 : Even */\r
+ /* 011 : None */\r
+ /* 100 : Forced to 0 */\r
+ /* 101 : Forced to 1 */\r
+\r
+ L3UCHAR DuplexMode; /* Mode duplex */\r
+ /* 0 : Half duplex */\r
+ /* 1 : Full duplex */\r
+\r
+ L3UCHAR ModemType; /* Modem type, see Q.931 p 64 */\r
+\r
+ L3UCHAR Layer2Ident; /* Layer 2 Ident */\r
+\r
+ L3UCHAR UIL2Prot; /* User Information Layer 2 Protocol */\r
+ /* 00010 : Q.921/I.441 */\r
+ /* 00110 : X.25 */\r
+ /* 01100 : LAN logical link */\r
+\r
+ L3UCHAR Layer3Ident; /* Layer 3 ident. */\r
+\r
+ L3UCHAR UIL3Prot; /* User Information Layer 3 Protocol */\r
+ /* 00010 : Q.931 */\r
+ /* 00110 : X.25 */\r
+ /* 01011 : ISO/IEC TR 9577 */\r
+\r
+ L3UCHAR AL3Info1; /* additional layer 3 info 1 */\r
+\r
+ L3UCHAR AL3Info2; /* additional layer 3 info 2 */\r
+}Q931ie_BearerCap;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_CallID\r
+\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 00010000 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR CallId[1]; /* Call identity */\r
+}Q931ie_CallID;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_CallState\r
+\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 00010100 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR CodStand; /* Coding Standard */\r
+ L3UCHAR CallState; /* Call State Value */\r
+}Q931ie_CallState;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_Cause\r
+\r
+ Description: Cause IE as described in Q.850\r
+\r
+*****************************************************************************/\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 00010100 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR CodStand; /* Coding Standard */\r
+ L3UCHAR Location; /* Location */\r
+ L3UCHAR Recom; /* Recommendation */\r
+ L3UCHAR Value; /* Cause Value */\r
+ L3UCHAR Diag[1]; /* Optional Diagnostics Field */\r
+}Q931ie_Cause;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_CalledNum\r
+\r
+*****************************************************************************/\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 01110000 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR TypNum; /* Type of Number */\r
+ L3UCHAR NumPlanID; /* Numbering plan identification */\r
+ L3UCHAR Digit[1]; /* Digit (IA5) */\r
+}Q931ie_CalledNum;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_CalledSub\r
+\r
+ Description: Called party subaddress\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 01110001 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR TypNum; /* Type of subaddress */\r
+ L3UCHAR OddEvenInd; /* Odd/Even indicator */\r
+ L3UCHAR Digit[1]; /* digits */\r
+}Q931ie_CalledSub;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_CallingNum\r
+\r
+ Description: Calling party number\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 01101100 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR TypNum; /* Type of number */\r
+ L3UCHAR NumPlanID; /* Numbering plan identification */\r
+ L3UCHAR PresInd; /* Presentation indicator */\r
+ L3UCHAR ScreenInd; /* Screening indicator */\r
+ L3UCHAR Digit[1]; /* Number digits (IA5) */\r
+}Q931ie_CallingNum;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_CallingSub\r
+\r
+ Description: Calling party subaddress\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 01101101 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR TypNum; /* Type of subaddress */\r
+ L3UCHAR OddEvenInd; /* Odd/Even indicator */\r
+ L3UCHAR Digit[1]; /* digits */\r
+}Q931ie_CallingSub;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_ChanID\r
+\r
+ Description: Channel identification\r
+\r
+ Channel Identificationis one of the IE elements that differ\r
+ between BRI and PRI. IntType = 1 = BRI and ChanSlot is used\r
+ for channel number, while InfoChanSel is used for BRI.\r
+\r
+ ChanID is one of the most important IE as it is passed \r
+ either though SETUP or CALL PROCEEDING to select the channel\r
+ to be used.\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 00011000 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR IntIDPresent; /* Int. id. present */\r
+ L3UCHAR IntType; /* Interface Type */\r
+ /* 0 : Basic Interface (BRI) */\r
+ /* 1 : Other interfaces, PRI etc. */\r
+\r
+ L3UCHAR PrefExcl; /* Pref./Excl. */\r
+ /* 0 : Indicated channel is preffered */\r
+ /* 1 : Exclusive, no other accepted */\r
+\r
+ L3UCHAR DChanInd; /* D-channel ind. */\r
+ /* 0 : chan is NOT D chan. */\r
+ /* 1 : chan is D chan */\r
+\r
+ L3UCHAR InfoChanSel; /* Info. channel selection */\r
+ /* 00 : No channel */\r
+ /* 01 : B1 channel */\r
+ /* 10 : B2 channel */\r
+ /* 11 : Any channel */\r
+\r
+ L3UCHAR InterfaceID; /* Interface identifier */\r
+\r
+ L3UCHAR CodStand; /* Code standard */\r
+ /* 00 : ITU-T standardization coding */\r
+ /* 01 : ISO/IEC Standard */\r
+ /* 10 : National Standard */\r
+ /* 11 : Standard def. by network. */\r
+\r
+ L3UCHAR NumMap; /* Number/Map */\r
+ /* 0 : chan is in following octet */\r
+ /* 1 : chan is indicated by slot map */\r
+\r
+ L3UCHAR ChanMapType; /* Channel type/Map element type */\r
+ /* 0011 : B Channel units */\r
+ /* 0110 : H0 channel units */\r
+ /* 1000 : H11 channel units */\r
+ /* 1001 : H12 channel units */\r
+\r
+ L3UCHAR ChanSlot; /* Channel number */\r
+}Q931ie_ChanID;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_DateTime\r
+\r
+ Description: Date/time\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 00101001 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR Year; /* Year */\r
+ L3UCHAR Month; /* Month */\r
+ L3UCHAR Day; /* Day */\r
+ L3UCHAR Hour; /* Hour */\r
+ L3UCHAR Minute; /* Minute */\r
+ L3UCHAR Second; /* Second */\r
+ L3UCHAR Format; /* Indicate presense of Hour, Min & sec */\r
+ /* 0 : Only Date */\r
+ /* 1 : Hour present */\r
+ /* 2 : Hour and Minute present */\r
+ /* 3 : Hour, Minute and Second present */\r
+}Q931ie_DateTime;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_Display\r
+\r
+ Description: Display\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 00101000 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR Display[1]; /* Display information (IA5) */\r
+}Q931ie_Display;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_HLComp\r
+\r
+ Description: High layer compatibility\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 01111101 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR CodStand; /* Coding standard */\r
+ L3UCHAR Interpret; /* Interpretation */\r
+ L3UCHAR PresMeth; /* Presentation methor of prot. profile */\r
+ L3UCHAR HLCharID; /* High layer characteristics id. */\r
+ L3UCHAR EHLCharID; /* Extended high layer character. id. */\r
+ L3UCHAR EVideoTlfCharID; /* Ext. videotelephony char. id. */\r
+}Q931ie_HLComp;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_KeypadFac\r
+\r
+ Description: Keypad facility\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 00101100 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR KeypadFac[1]; /* dynamic buffer */\r
+}Q931ie_KeypadFac;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_LLComp\r
+\r
+ Description: Low layer compatibility\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 01111100 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR CodStand; /* Coding standard */\r
+ /* 00 - ITU-T */\r
+ /* 01 - ISO/IEC */\r
+ /* 10 - National standard */\r
+ /* 11 - Network side spesific */\r
+\r
+ L3UCHAR ITransCap; /* Information transfer capability */\r
+ /* 00000 - Speech */\r
+ /* 01000 - Unrestricted digital info */\r
+ /* 01001 - Restricted digital info */\r
+ /* 10000 - 3.1 kHz audio */\r
+ /* 10001 - Unrestricted with tones */\r
+ /* 11000 - Video */\r
+\r
+ L3UCHAR NegotInd; /* Negot indic. */\r
+ /* 0 : Out-band neg. not possib. */\r
+ /* 1 : Out-band neg. possible */\r
+\r
+ L3UCHAR TransMode; /* Transfer Mode */\r
+ /* 00 : Circuit Mode */\r
+ /* 10 : Packed Mode */\r
+\r
+ L3UCHAR InfoRate; /* Information transfer rate */\r
+ /* 00000 - Packed mode */\r
+ /* 10000 - 64 kbit/s */\r
+ /* 10001 - 2 x 64 kbit/s */\r
+ /* 10011 - 384 kbit/s */\r
+ /* 10101 - 1536 kbit/s */\r
+ /* 10111 - 1920 kbit/s */\r
+ /* 11000 - Multirat (64 kbit/s base) */\r
+\r
+ L3UCHAR RateMul; /* Rate multiplier */\r
+ L3UCHAR Layer1Ident; /* Layer 1 ident. */\r
+ L3UCHAR UIL1Prot; /* User information layer 1 protocol */\r
+ /* 00001 : ITU-T V.110, I.460 and X.30 */\r
+ /* 00010 : G.711 my-law */\r
+ /* 00011 : G.711 A-law */\r
+ /* 00100 : G.721 */\r
+ /* 00101 : H.221 and H.242 */\r
+ /* 00110 : H.223 and H.245 */\r
+ /* 00111 : Non ITU-T Standard */\r
+ /* 01000 : ITU-T V.120 */\r
+ /* 01001 : ITU-T X.31 HDLC flag stuff. */\r
+\r
+ L3UCHAR SyncAsync; /* Synch/asynch */\r
+ /* 0 : Syncronous data */\r
+ /* 1 : Asyncronous data */\r
+\r
+ L3UCHAR Negot; /* Negot */\r
+ /* 0 : In-band negotiation not possib. */\r
+ /* 1 : In-band negotiation possible */\r
+\r
+ L3UCHAR UserRate; /* User rate */\r
+ /* 00000 : I.460, V.110, X,30 */\r
+ /* 00001 : 0.6 kbit/s x.1 */\r
+ /* 00010 : 1.2 kbit/s */\r
+ /* 00011 : 2.4 kbit/s */\r
+ /* 00100 : 3.6 kbit/s */\r
+ /* 00101 : 4.8 kbit/s */\r
+ /* 00110 : 7.2 kbit/s */\r
+ /* 00111 : 8 kbit/s I.460 */\r
+ /* 01000 : 9.6 kbit/s */\r
+ /* 01001 : 14.4 kbit/s */\r
+ /* 01010 : 16 kbit/s */\r
+ /* 01011 : 19.2 kbit/s */\r
+ /* 01100 : 32 kbit/s */\r
+ /* 01101 : 38.4 kbit/s */\r
+ /* 01110 : 48 kbit/s */\r
+ /* 01111 : 56 kbit/s */\r
+ /* 10000 : 57.6 kbit/s */\r
+ /* 10010 : 28.8 kbit/s */\r
+ /* 10100 : 24 kbit/s */\r
+ /* 10101 : 0.1345 kbit/s */\r
+ /* 10110 : 0.100 kbit/s */\r
+ /* 10111 : 0.075/1.2 kbit/s */\r
+ /* 11000 : 1.2/0.075/kbit/s */\r
+ /* 11001 : 0.050 kbit/s */\r
+ /* 11010 : 0.075 kbit/s */\r
+ /* 11011 : 0.110 kbit/s */\r
+ /* 11100 : 0.150 kbit/s */\r
+ /* 11101 : 0.200 kbit/s */\r
+ /* 11110 : 0.300 kbit/s */\r
+ /* 11111 : 12 kbit/s */\r
+\r
+ L3UCHAR InterRate; /* Intermediate rate */\r
+ /* 00 : Not used */\r
+ /* 01 : 8 kbit/s */\r
+ /* 10 : 16 kbit/s */\r
+ /* 11 : 32 kbit/s */\r
+\r
+ L3UCHAR NIConTx; /* Network Indepentend Clock on transmit*/\r
+ /* 0 : Not required to send data clc */\r
+ /* 1 : Send data w/NIC clc */\r
+\r
+ L3UCHAR NIConRx; /* NIC on Rx */\r
+ /* 0 : Cannot accept indep. clc */\r
+ /* 1 : data with indep. clc accepted */\r
+\r
+ L3UCHAR FlowCtlTx; /* Flow control on Tx */\r
+ /* 0 : Send Flow ctrl not required */\r
+ /* 1 : Send flow ctrl required */\r
+\r
+ L3UCHAR FlowCtlRx; /* Flow control on Rx */\r
+ /* 0 : cannot use receive flow ctrl */\r
+ /* 1 : Receive flow ctrl accepted */\r
+ L3UCHAR HDR; /* HDR/No HDR */\r
+ L3UCHAR MultiFrame; /* Multi frame support */\r
+ /* 0 : multiframe not supported */\r
+ /* 1 : multiframe supported */\r
+\r
+ L3UCHAR ModeL1; /* Mode L1 */\r
+ /* 0 : bit transparent mode of operat. */\r
+ /* 1 : protocol sesitive mode of op. */\r
+\r
+ L3UCHAR NegotLLI; /* Negot. LLI */\r
+ /* 0 : default LLI=256 only */\r
+ /* 1 : Full protocol negotiation */\r
+\r
+ L3UCHAR Assignor; /* Assignor/Assignor ee */\r
+ /* 0 : Default Asignee */\r
+ /* 1 : Assignor only */\r
+\r
+ L3UCHAR InBandNeg; /* In-band negot. */\r
+ /* 0 : negot done w/ USER INFO mes */\r
+ /* 1 : negot done in-band w/link zero */\r
+\r
+ L3UCHAR NumStopBits; /* Number of stop bits */\r
+ /* 00 : Not used */\r
+ /* 01 : 1 bit */\r
+ /* 10 : 1.5 bits */\r
+ /* 11 : 2 bits */\r
+\r
+ L3UCHAR NumDataBits; /* Number of data bits. */\r
+ /* 00 : not used */\r
+ /* 01 : 5 bits */\r
+ /* 10 : 7 bits */\r
+ /* 11 : 8 bits */\r
+\r
+ L3UCHAR Parity; /* Parity Information */\r
+ /* 000 : Odd */\r
+ /* 010 : Even */\r
+ /* 011 : None */\r
+ /* 100 : Forced to 0 */\r
+ /* 101 : Forced to 1 */\r
+\r
+ L3UCHAR DuplexMode; /* Mode duplex */\r
+ /* 0 : Half duplex */\r
+ /* 1 : Full duplex */\r
+\r
+ L3UCHAR ModemType; /* Modem type, see Q.931 p 89 */\r
+\r
+ L3UCHAR Layer2Ident; /* Layer 2 ident. */\r
+\r
+ L3UCHAR UIL2Prot; /* User information layer 2 protocol */\r
+ /* 00001 : Basic mode ISO 1745 */\r
+ /* 00010 : Q.921/I.441 */\r
+ /* 00110 : X.25 single link */\r
+ /* 00111 : X.25 multilink */\r
+ /* 01000 : Extended LAPB T.71 */\r
+ /* 01001 : HDLC ARM */\r
+ /* 01010 : HDLC NRM */\r
+ /* 01011 : HDLC ABM */\r
+ /* 01100 : LAN logical link */\r
+ /* 01101 : X.75 SLP */\r
+ /* 01110 : Q.922 */\r
+ /* 01111 : Q.922 core aspect */\r
+ /* 10000 : User specified */\r
+ /* 10001 : ISO/IEC 7776 DTE-DCE */\r
+\r
+ L3UCHAR ModeL2; /* Mode */\r
+ /* 01 : Normal Mode of operation */\r
+ /* 10 : Extended mode of operation */\r
+\r
+ L3UCHAR Q933use; /* Q.9333 use */\r
+\r
+ L3UCHAR UsrSpcL2Prot; /* User specified layer 2 protocol info */\r
+\r
+ L3UCHAR WindowSize; /* Window size (k) */\r
+\r
+ L3UCHAR Layer3Ident; /* Layer 3 ident */\r
+\r
+ L3UCHAR UIL3Prot; /* User Information Layer 3 protocol */\r
+ /* 00010 : Q.931 */\r
+ /* 00110 : X.25 */\r
+ /* 00111 : 8208 */\r
+ /* 01000 : X.233 ... */\r
+ /* 01001 : 6473 */\r
+ /* 01010 : T.70 */\r
+ /* 01011 : ISO/IEC TR 9577 */\r
+ /* 10000 : User specified */\r
+ L3UCHAR OptL3Info; /* Optional Leyer 3 info */\r
+\r
+ L3UCHAR ModeL3; /* Mode of operation */\r
+ /* 01 : Normal packed seq. numbering */\r
+ /* 10 : Extended packed seq. numbering */\r
+\r
+ L3UCHAR DefPackSize; /* Default packet size */\r
+\r
+ L3UCHAR PackWinSize; /* Packet window size */\r
+\r
+ L3UCHAR AddL3Info; /* Additional Layer 3 protocol info */\r
+}Q931ie_LLComp;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_NetFac;\r
+\r
+ Description: Network-specific facilities\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 00100000 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR LenNetID; /* Length of network facilities id. */\r
+ L3UCHAR TypeNetID; /* Type of network identification */\r
+ L3UCHAR NetIDPlan; /* Network identification plan. */\r
+ L3UCHAR NetFac; /* Network specific facility spec. */\r
+ L3UCHAR NetID[1]; /* Network id. (IA5) */\r
+}Q931ie_NetFac;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_NotifInd;\r
+\r
+ Description: Notification Indicator\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 00100000 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR Notification; /* Notification descriptor */\r
+}Q931ie_NotifInd;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_ProgInd\r
+\r
+ Description: Progress indicator\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 00011110 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR CodStand; /* Coding standard */\r
+ L3UCHAR Location; /* Location */\r
+ L3UCHAR ProgDesc; /* Progress description */\r
+}Q931ie_ProgInd;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct; Q931ie_Segment\r
+\r
+ Description: Segmented message\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 00000000 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR FSI; /* First segment indicator */\r
+ L3UCHAR NumSegRem; /* Number of segments remaining */\r
+ L3UCHAR SegType; /* Segment message type */\r
+}Q931ie_Segment;\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 00000000 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+}Q931ie_SendComplete;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_Signal\r
+\r
+ Description: Signal\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 00000000 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR Signal; /* Signal value */\r
+ /* 00000000 Dial tone on */\r
+ /* 00000001 Ring back tone on */\r
+ /* 00000010 Intercept tone on */\r
+ /* 00000011 Network congestion on */\r
+ /* 00000100 Busy tone on */\r
+ /* 00000101 Confirm tone on */\r
+ /* 00000110 Answer tone on */\r
+ /* 00000111 Call waiting tone */\r
+ /* 00001000 Off-hook warning tone */\r
+ /* 00001001 Pre-emption tone on */\r
+ /* 00111111 Tones off */\r
+ /* 01000000 Alerting on - pattern 0 */\r
+ /* 01000001 Alerting on - pattern 1 */\r
+ /* 01000010 Alerting on - pattern 2 */\r
+ /* 01000011 Alerting on - pattern 3 */\r
+ /* 01000100 Alerting on - pattern 4 */\r
+ /* 01000101 Alerting on - pattern 5 */\r
+ /* 01000110 Alerting on - pattern 6 */\r
+ /* 01000111 Alerting on - pattern 7 */\r
+ /* 01001111 Alerting off */\r
+}Q931ie_Signal;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_TransDelSelInd\r
+\r
+ description: Transit delay selection and indication\r
+\r
+*****************************************************************************/\r
+#ifdef Q931_X25_SUPPORT\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 00000000 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3ULONG TxDSIValue; /* Trans. delay sel. & ind. value */ \r
+}Q931ie_TransDelSelInd;\r
+#endif\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_TransNetSel\r
+\r
+ Description: Transit network selection\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 01111000 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR Type; /* Type of network identifier */\r
+ L3UCHAR NetIDPlan; /* Network idetification plan */\r
+ L3UCHAR NetID[1]; /* Network identification(IA5) */\r
+}Q931ie_TransNetSel;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_UserUser\r
+\r
+ Description: User-user\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 01111110 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR ProtDisc; /* Protocol discriminator */\r
+ L3UCHAR User[1]; /* User information */\r
+}Q931ie_UserUser;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_ClosedUserGrp\r
+\r
+ Description: Closed user group\r
+\r
+*****************************************************************************/\r
+#ifdef Q931_X25_SUPPORT\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 01000111 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR CUGInd; /* CUG indication */\r
+ L3UCHAR CUG[1]; /* CUG index code (IA5) */\r
+}Q931ie_ClosedUserGrp;\r
+#endif\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_CongLevel\r
+\r
+ Description: Congestion Level\r
+\r
+*****************************************************************************/\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 01000111 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR CongLevel; /* Conguestion Level */\r
+}Q931ie_CongLevel;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_EndEndTxDelay\r
+\r
+ Description: End to end transit delay\r
+\r
+*****************************************************************************/\r
+#ifdef Q931_X25_SUPPORT\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 01000010 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3ULONG CumTxDelay; /* Cumulative transit delay value */\r
+ L3ULONG ReqTxDelay; /* Requested end to end transit delay */\r
+ L3ULONG MaxTxDelay; /* Maximum transit delay */\r
+}Q931ie_EndEndTxDelay;\r
+#endif\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_InfoRate\r
+\r
+ Description: Information Rate\r
+\r
+*****************************************************************************/\r
+#ifdef Q931_X25_SUPPORT\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 01100000 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR InInfoRate; /* Incoming information rate */\r
+ L3UCHAR OutInfoRate; /* Outgoing information rate */\r
+ L3UCHAR MinInInfoRate; /* Minimum incoming information rate */\r
+ L3UCHAR MinOutInfoRate; /* Minimum outgoing information rate */\r
+}Q931ie_InfoRate;\r
+#endif\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_PackParam\r
+\r
+ Description: Packed layer binary parameters\r
+\r
+*****************************************************************************/\r
+#ifdef Q931_X25_SUPPORT\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 01000100 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR FastSel; /* Fast selected */\r
+ L3UCHAR ExpData; /* Exp. data */\r
+ L3UCHAR DelConf; /* Delivery conf */\r
+ L3UCHAR Modulus; /* Modulus */\r
+}Q931ie_PackParam;\r
+#endif\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_PackWinSize\r
+\r
+ Description: Packed window size\r
+\r
+*****************************************************************************/\r
+#ifdef Q931_X25_SUPPORT\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 01000101 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR ForwardValue; /* Forward value */\r
+ L3UCHAR BackwardValue; /* Backward value */\r
+}Q931ie_PackWinSize;\r
+#endif\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_PackSize\r
+\r
+ Description: Packet size\r
+\r
+*****************************************************************************/\r
+#ifdef Q931_X25_SUPPORT\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 01000110 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR ForwardValue; /* Forward value */\r
+ L3UCHAR BackwardValue; /* Backward value */\r
+}Q931ie_PackSize;\r
+#endif\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931ie_RedirNum\r
+\r
+ Description: Redirecting number\r
+\r
+*****************************************************************************/\r
+#ifdef Q931_X25_SUPPORT\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 01110100 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR TypeNum; /* Type of number */\r
+ L3UCHAR NumPlanID; /* Number plan identification */\r
+ L3UCHAR PresInd; /* Presentation indicator */\r
+ L3UCHAR ScreenInd; /* Screening indicator */\r
+ L3UCHAR Reason; /* Reason for redirection */\r
+ L3UCHAR Digit[1]; /* Number digits (IA5) */\r
+}Q931ie_RedirNum;\r
+#endif\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 01110100 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR RepeatInd; /* 0010 Prioritized list for selecting */\r
+ /* one possible. */\r
+}Q931ie_RepeatInd;\r
+\r
+typedef struct\r
+{\r
+ L3UCHAR IEId; /* 01110100 */\r
+ L3UCHAR Size; /* Length of Information Element */\r
+ L3UCHAR Class; /* Class */\r
+ /* 000 Indicate channels */\r
+ /* 110 Single interface */\r
+ /* 111 All interfaces */\r
+}Q931ie_RestartInd;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_Header\r
+\r
+ Description: Used to read the header & message code.\r
+\r
+*****************************************************************************/\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+}Q931mes_Header;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_Generic\r
+\r
+ Description: Generic header containing all IE's. This is not used, but is\r
+ provided in case a proprietary variant needs it.\r
+\r
+*****************************************************************************/\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+\r
+ ie Shift;\r
+ ie MoreData;\r
+ ie SendComplete;\r
+ ie CongestionLevel;\r
+ ie RepeatInd;\r
+\r
+ ie Segment; /* Segmented message */\r
+ ie BearerCap; /* Bearer Capability */\r
+ ie Cause; /* Cause */\r
+ ie CallID; /* Call Identity */\r
+ ie ChanID; /* Channel Identification */\r
+ ie ProgInd; /* Progress Indicator */\r
+ ie NetFac; /* Network Spesific Facilities */\r
+ ie NotifInd; /* Notification Indicator */\r
+ ie Display; /* Display */\r
+ ie DateTime; /* Date/Time */\r
+ ie KeypadFac; /* Keypad Facility */\r
+ ie Signal; /* Signal */\r
+ ie InfoRate; /* Information rate */\r
+ ie EndEndTxDelay; /* End to End Transmit Delay */\r
+ ie TransDelSelInd; /* Transmit Delay Sel. and Ind. */\r
+ ie PackParam; /* Packed Layer Binary parameters */\r
+ ie PackWinSize; /* Packet Layer Window Size */\r
+ ie PackSize; /* Packed Size */\r
+ ie ClosedUserGrp; /* Closed User Group */\r
+ ie RevChargeInd; /* Reverse Charging Indicator */\r
+ ie CalledNum; /* Called Party Number */\r
+ ie CalledSub; /* Called Party subaddress */\r
+ ie CallingNum; /* Calling Party Number */\r
+ ie CallingSub; /* Calling Party Subaddress */\r
+ ie RedirNum; /* Redirection Number */\r
+ ie TransNetSel; /* Transmit Network Selection */\r
+ ie RestartInd; /* Restart Indicator */\r
+ ie LLComp; /* Low Layer Compatibility */\r
+ ie HLComp; /* High Layer Compatibility */\r
+ ie UserUser; /* User-user */\r
+ ie Escape; /* Escape for extension */\r
+ L3UCHAR buf[1]; /* Buffer for IE's */\r
+\r
+}Q931mes_Generic;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_Alerting\r
+\r
+ Description: This message is send by the called party to indicate that\r
+ the phone is ringing.\r
+\r
+ The message consist of an header that MUST be identical with\r
+ Q931mes_Header, a fixed number of IE flags w/offset, and\r
+ a dynamic buffer storing normalized IE's.\r
+\r
+*****************************************************************************/\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie BearerCap; /* Bearer Capability */\r
+ ie ChanID; /* Channel Identification */\r
+ ie ProgInd; /* Progress Indicator */\r
+ ie Display; /* Display */\r
+ ie Signal; /* Signal */\r
+ ie HLComp; /* High Layer Compatibility */\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_Alerting;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_CallProceeding\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie BearerCap; /* Bearer Capability */\r
+ ie ChanID; /* Channel Identification */\r
+ ie ProgInd; /* Progress Indicator */\r
+ ie Display; /* Display */\r
+ ie HLComp; /* High Layer Compatibility */\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_CallProceeding;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_Connect\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie BearerCap; /* Bearer Capability */\r
+ ie ChanID; /* Channel Identification */\r
+ ie ProgInd; /* Progress Indicator */\r
+ ie Display; /* Display */\r
+ ie DateTime; /* Date/Time */\r
+ ie Signal; /* Signal */\r
+ ie LLComp; /* Low Layer Compatibility */\r
+ ie HLComp; /* High layer Compatibility */\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_Connect;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_ConnectAck\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie Display; /* Display */\r
+ ie Signal; /* Signal */\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_ConnectAck;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_Disconnect\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie Cause; /* Cause */\r
+ ie ProgInd; /* Progress Indicator */\r
+ ie Display; /* Display */\r
+ ie Signal; /* Signal */\r
+#ifdef Q931_X25_SUPPORT\r
+ ie UserUser; /* User - user. Packed Mode. */\r
+#endif\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_Disconnect;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_Information\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie SendComplete; /* Sending Complete */\r
+ ie Display; /* Display */\r
+ ie KeypadFac; /* Keypad facility */\r
+ ie Signal; /* Signal */\r
+ ie CalledNum; /* Called party number */\r
+#ifdef Q931_X25_SUPPORT\r
+ ie Cause; /* Cause (packed only) */\r
+#endif\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_Information;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_Notify\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie BearerCap; /* Bearer Capability */\r
+ ie NotifInd; /* Notification Indicator */\r
+ ie Display; /* Display */\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_Notify;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_Progress\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie BearerCap; /* Bearer Capability */\r
+ ie Cause; /* Cause */\r
+ ie ProgInd; /* Progress Indicator */\r
+ ie Display; /* Display */\r
+ ie HLComp; /* High Layer Compatibility */\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_Progress;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_Release\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie Cause; /* Cause */\r
+ ie Display; /* Display */\r
+ ie Signal; /* Signal */\r
+#ifdef Q931_X25_SUPPORT\r
+ ie UserUser; /* User-User packed mode */\r
+#endif\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_Release;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_ReleaseComplete\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie Cause; /* Cause */\r
+ ie Display; /* Display */\r
+ ie Signal; /* Signal */\r
+#ifdef Q931_X25_SUPPORT\r
+ ie UserUser; /* User-User packed mode */\r
+#endif\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_ReleaseComplete;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_Resume\r
+\r
+*****************************************************************************/\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie CallID; /* Call Identity */\r
+ L3UCHAR buf[1];\r
+}Q931mes_Resume;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_ResumeAck\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie ChanID; /* Channel ID */\r
+ ie Display; /* Display */\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_ResumeAck;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_ResumeReject\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie Cause; /* Cause */\r
+ ie Display; /* Display */\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_ResumeReject;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_Segment\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_Segment;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_Setup\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie SendComplete; /* Sending Complete */\r
+ ie RepeatInd; /* Repeat Indicator */\r
+ ie BearerCap; /* Bearer Capability */\r
+ ie ChanID; /* Channel ID */\r
+ ie ProgInd; /* Progress Indicator */\r
+ ie NetFac; /* Network-specific facilities */\r
+ /* Note: Up to 4 NetFac's may be */\r
+ /* included. */\r
+ ie Display; /* Display */\r
+ ie DateTime; /* Date/Time */\r
+ ie KeypadFac; /* Keypad Facility */\r
+ ie Signal; /* Signal */\r
+ ie CallingNum; /* Calling party number */\r
+ ie CallingSub; /* Calling party sub address */\r
+ ie CalledNum; /* Called party number */\r
+ ie CalledSub; /* Called party sub address */\r
+ ie TransNetSel; /* Transit network selection */\r
+ ie LLRepeatInd; /* Repeat Indicator 2 LLComp */\r
+ ie LLComp; /* Low layer compatibility */\r
+ ie HLComp; /* High layer compatibility */\r
+\r
+#ifdef Q931_X25_SUPPORT\r
+ /* Packed mode additions */\r
+ ie IndoRate; /* Information Rate */\r
+ ie EndEndDelay; /* End-end transit delay */\r
+ ie TransDelayInd; /* TRansit delay selection and ind. */\r
+ ie PackParam; /* Packed layer binary parameters */\r
+ ie PackWinSize; /* Packed layer window size */\r
+ ie PackSize; /* Packet Size */\r
+ ie ClosedUserGrp; /* Closed User Group */\r
+ ie RevChargInd; /* Reverse charhing indicator */\r
+ ie RedirNum; /* Redirection number */\r
+ ie UserUser; /* User-user. */\r
+#endif\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_Setup;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_SetupAck\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie ChanID; /* Channel ID */\r
+ ie ProgInd; /* Progress Indicator */\r
+ ie Display; /* Display */\r
+ ie Signal; /* Signal */\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_SetupAck;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_Status\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie Cause; /* Cause */\r
+ ie CallState; /* Call State */\r
+ ie Display; /* Display */\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_Status;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_StatusEnquire\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie Display; /* Display */\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_StatusEnquiry;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_Suspend\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie CallID; /* Call Identity */\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_Suspend;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_SuspendAck\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie Display; /* Display */\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_SuspendAck;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_SuspendReject\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie Cause; /* Cause */\r
+ ie Display; /* Display */\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_SuspendReject;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_CongestionControl\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie CongLevel; /* Congestion level */\r
+ ie Cause; /* Cause */\r
+ ie Display; /* Display */\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_CongestionControl;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_UserInformation\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie MoreData; /* More data */\r
+ ie UserUser; /* User-user */\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_UserInformation;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_Restart\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie ChanID; /* Channel identification */\r
+ ie Display; /* Display */\r
+ ie RestartInd; /* Restart indicator */\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_Restart;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931mes_RestartAck\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ L3UINT Size; /* Size of message in bytes */\r
+ L3UCHAR ProtDisc; /* Protocol Discriminator */\r
+ L3UCHAR MesType; /* Message type */\r
+ L3INT CRV; /* Call reference value */\r
+ ie ChanID; /* Channel identification */\r
+ ie Display; /* Display */\r
+ ie RestartWin; /* Restart Window */\r
+ ie RestartInd; /* Restart Indicator */\r
+ L3UCHAR buf[1]; /* Dynamic buffer */\r
+}Q931mes_RestartAck;\r
+\r
+/*****************************************************************************\r
+\r
+ Struct: Q931_TrunkInfo\r
+\r
+ Description: TrunkInfo is the struct entry used to store Q.931 related \r
+ information and state for E1/T1/J1 trunks and assosiated \r
+ channels in the system. \r
+\r
+ The user should store this information outside this stack\r
+ and need to feed the interface functions with a pointer to\r
+ the trunk Info entry.\r
+\r
+*****************************************************************************/\r
+\r
+typedef struct\r
+{\r
+ enum _NetUser /* Network/User Mode. */\r
+ {\r
+ Q931_TE=0, /* 0 : User Mode */\r
+ Q931_NT=1 /* 1 : Network Mode */\r
+ }NetUser;\r
+\r
+ L3UCHAR Dialect; /* Q.931 Based dielact index. */\r
+\r
+ enum _TrunkType /* Trunk Line Type. */\r
+ {\r
+ Q931_TrType_E1=0, /* 0 : E1 Trunk */\r
+ Q931_TrType_T1=1, /* 1 : T1 Trunk */\r
+ Q931_TrType_J1=2, /* 2 : J1 Trunk */\r
+ Q931_TrType_BRI=3 /* 3 : BRI Trunk */\r
+ }TrunkType;\r
+\r
+ L3UCHAR Enabled; /* Enabled/Disabled */\r
+ /* 0 = Disabled */\r
+ /* 1 = Enabled */\r
+\r
+ enum _TrState /* Trunk State */\r
+ {\r
+ Q931_TrState_NoAlignment=0, /* Trunk not aligned */\r
+ Q931_TrState_Aligning=1, /* Aligning in progress */\r
+ Q931_TrState_Aligned=2 /* Trunk Aligned */\r
+ }TrunkState;\r
+\r
+ L3INT LastCRV; /* Last used crv for the trunk. */\r
+\r
+ L3UCHAR L3Buf[Q931L4BUF]; /* message buffer for messages to be */\r
+ /* send from Q.931 L4. */\r
+\r
+ L3UCHAR L2Buf[Q931L2BUF]; /* buffer for messages send to L2. */\r
+\r
+ /* The auto flags below switch on/off automatic Ack messages. SETUP ACK */\r
+ /* as an example can be send by the stack in response to SETUP to buy */\r
+ /* time in processing on L4. Setting this to true will cause the stack */\r
+ /* to automatically send this. */\r
+\r
+ L3BOOL autoSetupAck; /* Indicate if the stack should send */\r
+ /* SETUP ACK or not. 0=No, 1 = Yes. */\r
+\r
+ L3BOOL autoConnectAck; /* Indicate if the stack should send */\r
+ /* CONNECT ACT or not. 0=No, 1=Yes. */\r
+\r
+ L3BOOL autoRestartAck; /* Indicate if the stack should send */\r
+ /* RESTART ACK or not. 0=No, 1=Yes. */\r
+\r
+ /* channel array holding info per channel. Usually defined to 32 */\r
+ /* channels to fit an E1 since T1/J1 and BRI will fit inside a E1. */\r
+ struct _charray\r
+ {\r
+ enum _ChanType{\r
+ Q931_ChType_NotUsed=0, /* Unused Channel */\r
+ Q931_ChType_B=1, /* B Channel (Voice) */ \r
+ Q931_ChType_D=2, /* D Channel (Signalling) */\r
+ Q931_ChType_Sync=3 /* Sync Channel */\r
+ }ChanType;\r
+\r
+ L3UCHAR Available; /* Channel Available Flag */\r
+ /* 0 : Avaiabled */\r
+ /* 1 : Used */\r
+\r
+ L3INT CRV; /* Associated CRV */\r
+\r
+ }ch[Q931MAXCHPERTRUNK];\r
+\r
+ /* Active Call information indentified by CRV. See Q931AllocateCRV for */\r
+ /* initialization of call table. */\r
+ struct _ccarray\r
+ {\r
+ L3UCHAR InUse; /* Indicate if entry is in use. */\r
+ /* 0 = Not in Use */\r
+ /* 1 = Active Call. */\r
+\r
+ L3UCHAR BChan; /* Associated B Channel. */\r
+ /* 0 - 31 valid B chan */\r
+ /* 255 = Not allocated */\r
+\r
+ L3INT CRV; /* Associated CRV. */\r
+\r
+ L3UINT State; /* Call State. */\r
+ /* 0 is Idle, but other values are */\r
+ /* defined per dialect. */\r
+ /* Default usage is 1-99 for TE and */\r
+ /* 101 - 199 for NT. */\r
+ \r
+ L3ULONG Timer; /* Timer in ms. The TimeTick will check */\r
+ /* if this has exceeded the timeout, and*/\r
+ /* if so call the timers timeout proc. */\r
+\r
+ L3USHORT TimerID; /* Timer Identification/State */\r
+ /* actual values defined by dialect */\r
+ /* 0 : No timer running */\r
+ /* ITU-T Q.931:301 - 322 Timer running */\r
+\r
+ }call[Q931MAXCALLPERTRUNK];\r
+\r
+}Q931_TrunkInfo;\r
+\r
+/*****************************************************************************\r
+ \r
+ Struct: Q931State\r
+\r
+ Description: Define a Q931 State, legal events and next state for each\r
+ event. Used to simplify the state engine logic. Each state\r
+ engine define it's own state table and the logic only need\r
+ to call a helper function to check if the message is legal\r
+ at this stage.\r
+\r
+*****************************************************************************/\r
+typedef struct\r
+{\r
+ L3INT State;\r
+ L3INT Message;\r
+ L3UCHAR Direction;\r
+}Q931State;\r
+\r
+/*****************************************************************************\r
+\r
+ Proc table external references. \r
+\r
+ The proc tables are defined in Q931.c and initialized in Q931Initialize.\r
+\r
+*****************************************************************************/\r
+extern L3INT (*Q931Proc [Q931MAXDLCT][Q931MAXMES]) (Q931_TrunkInfo *pTrunk, L3UCHAR *,L3INT);\r
+\r
+extern L3INT (*Q931Umes [Q931MAXDLCT][Q931MAXMES]) (Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT IOff, L3INT Size);\r
+extern L3INT (*Q931Pmes [Q931MAXDLCT][Q931MAXMES]) (Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+\r
+extern L3INT (*Q931Uie [Q931MAXDLCT][Q931MAXIE] ) (Q931_TrunkInfo *pTrunk,ie *pIE,L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+extern L3INT (*Q931Pie [Q931MAXDLCT][Q931MAXIE] ) (Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+\r
+/*****************************************************************************\r
+ \r
+ Macro: GetIETotoSize\r
+\r
+ Syntax: L3INT GetIETotSize(InfoElem ie);\r
+\r
+ Description: Compute the total size in bytes of an info element including \r
+ size of 'header'. \r
+\r
+*****************************************************************************/\r
+#define Q931GetIETotSize(ie) (((ie.InfoID & 0x80) !=0) ? 1:ie.LenIE)+2)\r
+\r
+/*****************************************************************************\r
+\r
+ Macro: IsIEPresent\r
+\r
+ Syntax: BOOL IsIEPresent(ie InfoElement);\r
+\r
+ Description: Return TRUE if the Information Element is included.\r
+\r
+*****************************************************************************/\r
+#define Q931IsIEPresent(x) ((x & 0x8000) != 0)\r
+\r
+/*****************************************************************************\r
+\r
+ Macro: GetIEOffset and GetIEValue\r
+ \r
+ Syntax: L3INT GetIEOffset(ie InfoElement)\r
+ L3INT GetIEValue(ie InfoElement)\r
+\r
+ Description: Returns the offset (or the value )to the Information Element.\r
+\r
+ Note: GetIEValue assumes that the 15 lsb bit is the value of a \r
+ single octet information element. This macro can not be used\r
+ on a variable information element.\r
+\r
+*****************************************************************************/\r
+#define Q931GetIEOffset(x) (x & 0x7fff)\r
+#define Q931GetIEValue(x) (x & 0x7fff)\r
+\r
+/*****************************************************************************\r
+\r
+ Macro: Q931GetIEPtr\r
+\r
+ Syntax: void * Q931GetIEPtr(ie InfoElement, L3UCHAR * Buf);\r
+\r
+ Description: Compute a Ptr to the information element.\r
+\r
+*****************************************************************************/\r
+#define Q931GetIEPtr(ie,buf) (&buf[Q931GetIEOffset(ie)])\r
+\r
+/*****************************************************************************\r
+\r
+ Macro: SetIE\r
+\r
+ Syntax: void SetIE(ie InfoElement, L3INT Offset);\r
+\r
+ Description: Set an information element.\r
+\r
+*****************************************************************************/\r
+#define Q931SetIE(x,o) {x = (ie)(o) | 0x8000;}\r
+\r
+/*****************************************************************************\r
+\r
+ Macro: IsQ931Ext\r
+\r
+ Syntax BOOL IsQ931Ext(L3UCHAR c)\r
+\r
+ Description: Return true Check if the msb (bit 8) is 0. This indicate\r
+ that the octet is extended.\r
+\r
+*****************************************************************************/\r
+#define IsQ931Ext(x) ((x&0x80)==0)\r
+\r
+/*****************************************************************************\r
+\r
+ Macro: ieGetOctet\r
+\r
+ Syntax: unsigned L3UCHAR ieGetOctet(L3INT e)\r
+\r
+ Description: Macro to fetch one byte from an integer. Mostly used to \r
+ avoid warnings.\r
+\r
+*****************************************************************************/\r
+#define ieGetOctet(x) ((L3UCHAR)(x))\r
+\r
+/*****************************************************************************\r
+\r
+ Macro: NoWarning\r
+\r
+ Syntax: void NoWarning(x)\r
+\r
+ Description: Macro to suppress unreferenced formal parameter warnings\r
+\r
+ Used during creation of the stack since the stack is \r
+ developed for Warning Level 4 and this creates a lot of \r
+ warning for the initial empty functions.\r
+\r
+*****************************************************************************/\r
+#define NoWarning(x) (x=x)\r
+\r
+/*****************************************************************************\r
+\r
+ External references. See Q931.c for details.\r
+\r
+*****************************************************************************/\r
+\r
+extern Q931_TrunkInfo Q931Trunk[Q931MAXTRUNKS];\r
+\r
+#include "Q932.h"\r
+\r
+/*****************************************************************************\r
+\r
+ Q.931 Information Element Pack/Unpack functions. Implemented in Q931ie.c\r
+\r
+*****************************************************************************/\r
+\r
+L3INT Q931Pie_BearerCap(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_ChanID(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_ProgInd(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_Display(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_Signal(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_HLComp(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_Segment(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_DateTime(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_Cause(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_SendComplete(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_KeypadFac(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_NotifInd(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_CallID(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_RepeatInd(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_NetFac(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_CallingNum(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_CallingSub(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_CalledNum(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_CalledSub(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_CalledNum(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_TransNetSel(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_LLComp(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_CallState(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_RestartInd(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+L3INT Q931Pie_UserUser(Q931_TrunkInfo *pTrunk,L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet);\r
+\r
+L3INT Q931Uie_BearerCap(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3USHORT Q931Uie_CRV(Q931_TrunkInfo *pTrunk,L3UCHAR * IBuf, L3UCHAR *OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_ChanID(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR *OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_ProgInd(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_Display(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_Signal(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_HLComp(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_Segment(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_DateTime(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_Cause(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_SendComplete(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_KeypadFac(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_NotifInd(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_CallID(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_RepeatInd(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_NetFac(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_CallingNum(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_CallingSub(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_CalledNum(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_CalledSub(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_TransNetSel(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_LLComp(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_CallState(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_RestartInd(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+L3INT Q931Uie_UserUser(Q931_TrunkInfo *pTrunk,ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff);\r
+\r
+/*****************************************************************************\r
+\r
+ Q.931 Message Pack/Unpack functions. Implemented in Q931mes.c\r
+\r
+*****************************************************************************/\r
+L3INT Q931Pmes_Alerting(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_CallProceeding(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_Connect(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_ConnectAck(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_Progress(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_Setup(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_SetupAck(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_Resume(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_ResumeAck(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_ResumeReject(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_Suspend(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_SuspendAck(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_SuspendReject(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_UserInformation(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_Disconnect(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_Release(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_ReleaseComplete(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_Restart(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_RestartAck(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_CongestionControl(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_Information(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_Notify(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_Segment(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_Status(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+L3INT Q931Pmes_StatusEnquiry(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize);\r
+\r
+L3INT Q931Umes_Alerting(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_CallProceeding(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_Connect(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_ConnectAck(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_Progress(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_Setup(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_SetupAck(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_Resume(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_ResumeAck(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_ResumeReject(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_Suspend(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_SuspendAck(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_SuspendReject(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_UserInformation(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_Disconnect(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_Release(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_ReleaseComplete(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_Restart(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_RestartAck(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_CongestionControl(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_Information(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_Notify(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_Segment(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_Status(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+L3INT Q931Umes_StatusEnquiry(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR * OBuf, L3INT I, L3INT O);\r
+\r
+/*****************************************************************************\r
+\r
+ Q.931 Process Function Prototyping. Implemented in Q931StateTE.c\r
+\r
+*****************************************************************************/\r
+L3INT Q931ProcAlertingTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcCallProceedingTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcConnectTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcConnectAckTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcProgressTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcSetupTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcSetupAckTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcResumeTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcResumeAckTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcResumeRejectTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcSuspendTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcSuspendAckTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcSuspendRejectTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcUserInformationTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcDisconnectTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcReleaseTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcReleaseCompleteTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcRestartTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcRestartAckTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcCongestionControlTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcInformationTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcNotifyTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcStatusTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcStatusEnquiryTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcSegmentTE(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+\r
+L3INT Q931ProcAlertingNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcCallProceedingNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcConnectNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcConnectAckNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcProgressNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcSetupNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcSetupAckNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcResumeNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcResumeAckNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcResumeRejectNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcSuspendNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcSuspendAckNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcSuspendRejectNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcUserInformationNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcDisconnectNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcReleaseNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcReleaseCompleteNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcRestartNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcRestartAckNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcCongestionControlNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcInformationNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcNotifyNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcStatusNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcStatusEnquiryNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcSegmentNT(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+\r
+L3INT Q931ProcUnknownMessage(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+L3INT Q931ProcUnexpectedMessage(Q931_TrunkInfo *pTrunk,L3UCHAR * b, L3INT iFrom);\r
+\r
+/*****************************************************************************\r
+\r
+ Interface Function Prototypes. Implemented in Q931.c\r
+\r
+*****************************************************************************/\r
+void Q931TimeTick(L3ULONG ms);\r
+L3INT Q931Rx23(Q931_TrunkInfo *pTrunk, L3UCHAR * Mes, L3INT Size);\r
+L3INT Q931Tx32(Q931_TrunkInfo *pTrunk, L3UCHAR * Mes, L3INT Size);\r
+L3INT Q931Rx43(Q931_TrunkInfo *pTrunk, L3UCHAR * Mes, L3INT Size);\r
+L3INT Q931Tx34(Q931_TrunkInfo *pTrunk, L3UCHAR * Mes, L3INT Size);\r
+void Q931SetError(Q931_TrunkInfo *pTrunk,L3INT ErrID, L3INT ErrPar1, L3INT ErrPar2);\r
+void Q931SetTx34CB(L3INT (*Q931Tx34Par)(Q931_TrunkInfo *pTrunk,L3UCHAR * Mes, L3INT Size));\r
+void Q931SetTx32CB(L3INT (*Q931Tx32Par)(Q931_TrunkInfo *pTrunk,L3UCHAR * Mes, L3INT Size));\r
+void Q931SetErrorCB(L3INT (*Q931ErrorPar)(Q931_TrunkInfo *pTrunk,L3INT,L3INT,L3INT));\r
+void Q931CreateTE(L3UCHAR i);\r
+void Q931CreateNT(L3UCHAR i);\r
+void Q931SetMesCreateCB(L3INT (*callback)());\r
+void Q931SetDialectCreateCB(L3INT (*callback)(L3INT));\r
+void Q931SetHeaderSpace(L3INT space);\r
+void Q931SetMesProc(L3UCHAR mes, L3UCHAR dialect, \r
+ L3INT (*Q931ProcFunc)(Q931_TrunkInfo *pTrunk, L3UCHAR * b, L3INT iFrom),\r
+ L3INT (*Q931UmesFunc)(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT IOff, L3INT Size),\r
+ L3INT (*Q931PmesFunc)(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3INT ISize, L3UCHAR *OBuf, L3INT *OSize));\r
+\r
+void Q931SetIEProc(L3UCHAR iec, L3UCHAR dialect, \r
+ L3INT (*Q931PieProc)(Q931_TrunkInfo *pTrunk, L3UCHAR *IBuf, L3UCHAR *OBuf, L3INT *Octet),\r
+ L3INT (*Q931UieProc)(Q931_TrunkInfo *pTrunk, ie *pIE, L3UCHAR * IBuf, L3UCHAR * OBuf, L3INT *IOff, L3INT *OOff)); \r
+\r
+void Q931Initialize();\r
+void Q931AddDialect(L3UCHAR iDialect, void (*Q931CreateDialectCB)(L3UCHAR iDialect));\r
+L3INT Q931InitMesSetup(Q931mes_Setup *p);\r
+\r
+L3INT Q931CreateCRV(Q931_TrunkInfo *pTrunk, L3INT * callIndex);\r
+L3INT Q931AllocateCRV(Q931_TrunkInfo *pTrunk, L3INT iCRV, L3INT * callIndex);\r
+L3INT Q931FindCRV(Q931_TrunkInfo *pTrunk, L3INT crv, L3INT *callindex);\r
+L3INT Q931GetCallState(Q931_TrunkInfo *pTrunk, L3INT iCRV);\r
+L3INT Q931StartTimer(Q931_TrunkInfo *pTrunk, L3INT callIndex, L3USHORT iTimer);\r
+L3INT Q931StopTimer(Q931_TrunkInfo *pTrunk, L3INT callindex, L3USHORT iTimer);\r
+L3INT Q931SetState(Q931_TrunkInfo *pTrunk, L3INT callIndex, L3INT iState);\r
+L3ULONG Q931GetTime();\r
+void Q931AddStateEntry(L3UCHAR iD, L3INT iState, L3INT iMes, L3UCHAR cDir);\r
+L3BOOL Q931IsEventLegal(L3UCHAR iD, L3INT iState, L3INT iMes, L3UCHAR cDir);\r
+\r
+/*****************************************************************************\r
+\r
+ Q.931 Low Level API Function Prototyping. Implemented in Q931API.c\r
+\r
+*****************************************************************************/\r
+ie Q931AppendIE(L3UCHAR *pm, L3UCHAR *pi);\r
+L3INT Q931GetUniqueCRV(Q931_TrunkInfo *pTrunk);\r
+\r
+L3INT Q931InitIEBearerCap(Q931ie_BearerCap *p);\r
+L3INT Q931InitIEChanID(Q931ie_ChanID *p);\r
+L3INT Q931InitIEProgInd(Q931ie_ProgInd *p);\r
+L3INT Q931InitIENetFac(Q931ie_NetFac * pIE);\r
+L3INT Q931InitIEDisplay(Q931ie_Display * pIE);\r
+L3INT Q931InitIEDateTime(Q931ie_DateTime * pIE);\r
+L3INT Q931InitIEKeypadFac(Q931ie_KeypadFac * pIE);\r
+L3INT Q931InitIESignal(Q931ie_Signal * pIE);\r
+L3INT Q931InitIECallingNum(Q931ie_CallingNum * pIE);\r
+L3INT Q931InitIECallingSub(Q931ie_CallingSub * pIE);\r
+L3INT Q931InitIECalledNum(Q931ie_CalledNum * pIE);\r
+L3INT Q931InitIECalledSub(Q931ie_CalledSub * pIE);\r
+L3INT Q931InitIETransNetSel(Q931ie_TransNetSel * pIE);\r
+L3INT Q931InitIELLComp(Q931ie_LLComp * pIE);\r
+L3INT Q931InitIEHLComp(Q931ie_HLComp * pIE);\r
+\r
+L3INT Q931Disconnect(Q931_TrunkInfo *pTrunk, L3INT iTo, L3INT iCRV, L3INT iCause);\r
+L3INT Q931ReleaseComplete(Q931_TrunkInfo *pTrunk, L3INT iTo);\r
+\r
+#endif /* _Q931_NL */\r
projects / thirdparty / freeswitch.git / commitdiff
