#include "hw/pci/pci.h"
#include "hw/pci-bridge/cxl_upstream_port.h"
#include "qemu/cutils.h"
+#include "qemu/host-utils.h"
#include "qemu/log.h"
#include "qemu/units.h"
#include "qemu/uuid.h"
FMAPI_DCD_MGMT = 0x56,
#define GET_DCD_INFO 0x0
#define GET_HOST_DC_REGION_CONFIG 0x1
+ #define SET_DC_REGION_CONFIG 0x2
};
/* CCI Message Format CXL r3.1 Figure 7-19 */
return CXL_MBOX_SUCCESS;
}
+/* CXL r3.2 section 7.6.7.6.3: Set Host DC Region Configuration (Opcode 5602) */
+static CXLRetCode cmd_fm_set_dc_region_config(const struct cxl_cmd *cmd,
+ uint8_t *payload_in,
+ size_t len_in,
+ uint8_t *payload_out,
+ size_t *len_out,
+ CXLCCI *cci)
+{
+ struct {
+ uint8_t reg_id;
+ uint8_t rsvd[3];
+ uint64_t block_sz;
+ uint8_t flags;
+ uint8_t rsvd2[3];
+ } QEMU_PACKED *in = (void *)payload_in;
+ CXLType3Dev *ct3d = CXL_TYPE3(cci->d);
+ CXLEventDynamicCapacity dcEvent = {};
+ CXLDCRegion *region = &ct3d->dc.regions[in->reg_id];
+
+ /*
+ * CXL r3.2 7.6.7.6.3: Set DC Region Configuration
+ * This command shall fail with Unsupported when the Sanitize on Release
+ * field does not match the region’s configuration... and the device
+ * does not support reconfiguration of the Sanitize on Release setting.
+ *
+ * Currently not reconfigurable, so always fail if sanitize bit (bit 0)
+ * doesn't match.
+ */
+ if ((in->flags & 0x1) != (region->flags & 0x1)) {
+ return CXL_MBOX_UNSUPPORTED;
+ }
+
+ if (in->reg_id >= DCD_MAX_NUM_REGION) {
+ return CXL_MBOX_UNSUPPORTED;
+ }
+
+ /* Check that no extents are in the region being reconfigured */
+ if (!bitmap_empty(region->blk_bitmap, region->len / region->block_size)) {
+ return CXL_MBOX_UNSUPPORTED;
+ }
+
+ /* Check that new block size is supported */
+ if (!is_power_of_2(in->block_sz) ||
+ !(in->block_sz & region->supported_blk_size_bitmask)) {
+ return CXL_MBOX_INVALID_INPUT;
+ }
+
+ /* Return success if new block size == current block size */
+ if (in->block_sz == region->block_size) {
+ return CXL_MBOX_SUCCESS;
+ }
+
+ /* Free bitmap and create new one for new block size. */
+ qemu_mutex_lock(®ion->bitmap_lock);
+ g_free(region->blk_bitmap);
+ region->blk_bitmap = bitmap_new(region->len / in->block_sz);
+ qemu_mutex_unlock(®ion->bitmap_lock);
+ region->block_size = in->block_sz;
+
+ /* Create event record and insert into event log */
+ cxl_assign_event_header(&dcEvent.hdr,
+ &dynamic_capacity_uuid,
+ (1 << CXL_EVENT_TYPE_INFO),
+ sizeof(dcEvent),
+ cxl_device_get_timestamp(&ct3d->cxl_dstate));
+ dcEvent.type = DC_EVENT_REGION_CONFIG_UPDATED;
+ dcEvent.validity_flags = 1;
+ dcEvent.host_id = 0;
+ dcEvent.updated_region_id = in->reg_id;
+
+ if (cxl_event_insert(&ct3d->cxl_dstate,
+ CXL_EVENT_TYPE_DYNAMIC_CAP,
+ (CXLEventRecordRaw *)&dcEvent)) {
+ cxl_event_irq_assert(ct3d);
+ }
+ return CXL_MBOX_SUCCESS;
+}
+
static const struct cxl_cmd cxl_cmd_set[256][256] = {
[INFOSTAT][BACKGROUND_OPERATION_ABORT] = { "BACKGROUND_OPERATION_ABORT",
cmd_infostat_bg_op_abort, 0, 0 },
cmd_fm_get_dcd_info, 0, 0 },
[FMAPI_DCD_MGMT][GET_HOST_DC_REGION_CONFIG] = { "GET_HOST_DC_REGION_CONFIG",
cmd_fm_get_host_dc_region_config, 4, 0 },
+ [FMAPI_DCD_MGMT][SET_DC_REGION_CONFIG] = { "SET_DC_REGION_CONFIG",
+ cmd_fm_set_dc_region_config, 16,
+ (CXL_MBOX_CONFIG_CHANGE_COLD_RESET |
+ CXL_MBOX_CONFIG_CHANGE_CONV_RESET |
+ CXL_MBOX_CONFIG_CHANGE_CXL_RESET |
+ CXL_MBOX_IMMEDIATE_CONFIG_CHANGE |
+ CXL_MBOX_IMMEDIATE_DATA_CHANGE) },
};
/*