dnl
dnl Duane Wessels, wessels@nlanr.net, February 1996 (autoconf v2.9)
dnl
-dnl $Id: configure.in,v 1.304 2002/11/22 14:25:34 robertc Exp $
+dnl $Id: configure.in,v 1.305 2002/11/29 22:22:18 hno Exp $
dnl
dnl
dnl
AC_CONFIG_AUX_DIR(cfgaux)
AM_INIT_AUTOMAKE(squid, 3.0-DEVEL)
AM_CONFIG_HEADER(include/autoconf.h)
-AC_REVISION($Revision: 1.304 $)dnl
+AC_REVISION($Revision: 1.305 $)dnl
AC_PREFIX_DEFAULT(/usr/local/squid)
AM_MAINTAINER_MODE
module],
[ case $enableval in
yes)
- for module in $srcdir/src/auth/*; do
- if test -f $module/Makefile.in; then
- AUTH_MODULES="$AUTH_MODULES `basename $module`"
+ for dir in $srcdir/src/auth/*; do
+ module="`basename $dir`"
+ if test -f $module/auth_${module}.cc; then
+ AUTH_MODULES="$AUTH_MODULES $module"
fi
done
;;
dnl Clean up after OSF/1 core dump bug
rm -f core
-dnl FS_MAKEFILES=""
-dnl for fs in $STORE_MODULES none; do
-dnl if test $fs != none; then
-dnl FS_MAKEFILES="$FS_MAKEFILES ./src/fs/$fs/Makefile"
-dnl fi
-dnl done
-dnl REPL_MAKEFILES=""
-dnl for repl in $REPL_POLICIES none; do
-dnl if test $repl != none; then
-dnl REPL_MAKEFILES="$REPL_MAKEFILES ./src/repl/$repl/Makefile"
-dnl fi
-dnl done
-
-dnl This could actually be used to find all the Makefiles..
-dnl One of Automake's limitations is that it needs to know all the created makefiles.
-dnl AUTH_MAKEFILES=""
-dnl for auth in `find $srcdir/src/auth -type d -print`; do
-dnl if test -f $auth/Makefile.in; then
-dnl dir=`echo $auth | sed -e "s|^$srcdir/||"`
-dnl AUTH_MAKEFILES="$AUTH_MAKEFILES ./$dir/Makefile"
-dnl fi
-dnl done
-
-
-dnl src/fs/aufs/Makefile \
-dnl src/fs/coss/Makefile \
-dnl src/fs/diskd/Makefile \
-dnl src/fs/null/Makefile \
-dnl src/fs/ufs/Makefile \
-dnl src/repl/heap/Makefile \
-dnl src/repl/lru/Makefile \
AC_CONFIG_FILES([\
Makefile \
lib/Makefile \
+++ /dev/null
-# Makefile.in generated automatically by automake 1.5 from Makefile.am.
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ../../..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = @program_transform_name@
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_alias = @host_alias@
-host_triplet = @host@
-AMTAR = @AMTAR@
-AR = @AR@
-AR_R = @AR_R@
-AUTH_LIBS = @AUTH_LIBS@
-AUTH_MODULES = @AUTH_MODULES@
-AUTH_OBJS = @AUTH_OBJS@
-AWK = @AWK@
-BASIC_AUTH_HELPERS = @BASIC_AUTH_HELPERS@
-CC = @CC@
-CGIEXT = @CGIEXT@
-CPP = @CPP@
-CRYPTLIB = @CRYPTLIB@
-CXX = @CXX@
-DEPDIR = @DEPDIR@
-DIGEST_AUTH_HELPERS = @DIGEST_AUTH_HELPERS@
-ERR_DEFAULT_LANGUAGE = @ERR_DEFAULT_LANGUAGE@
-ERR_LANGUAGES = @ERR_LANGUAGES@
-EXEEXT = @EXEEXT@
-EXTERNAL_ACL_HELPERS = @EXTERNAL_ACL_HELPERS@
-FALSE = @FALSE@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LIBDLMALLOC = @LIBDLMALLOC@
-LIBREGEX = @LIBREGEX@
-LIB_MALLOC = @LIB_MALLOC@
-LN = @LN@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MKDIR = @MKDIR@
-MV = @MV@
-NTLM_AUTH_HELPERS = @NTLM_AUTH_HELPERS@
-OBJEXT = @OBJEXT@
-OPT_DEFAULT_HOSTS = @OPT_DEFAULT_HOSTS@
-PACKAGE = @PACKAGE@
-PERL = @PERL@
-RANLIB = @RANLIB@
-REGEXLIB = @REGEXLIB@
-REPL_LIBS = @REPL_LIBS@
-REPL_OBJS = @REPL_OBJS@
-REPL_POLICIES = @REPL_POLICIES@
-RM = @RM@
-SH = @SH@
-SNMPLIB = @SNMPLIB@
-SSLLIB = @SSLLIB@
-STORE_LIBS = @STORE_LIBS@
-STORE_MODULES = @STORE_MODULES@
-STORE_MODULE_SUBDIRS = @STORE_MODULE_SUBDIRS@
-STORE_OBJS = @STORE_OBJS@
-TRUE = @TRUE@
-VERSION = @VERSION@
-XTRA_LIBS = @XTRA_LIBS@
-XTRA_OBJS = @XTRA_OBJS@
-am__include = @am__include@
-am__quote = @am__quote@
-install_sh = @install_sh@
-makesnmplib = @makesnmplib@
-
-SUBDIRS =
-subdir = src/auth/basic
-mkinstalldirs = $(SHELL) $(top_srcdir)/cfgaux/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/include/autoconf.h
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-
-RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
- uninstall-info-recursive all-recursive install-data-recursive \
- install-exec-recursive installdirs-recursive install-recursive \
- uninstall-recursive check-recursive installcheck-recursive
-DIST_COMMON = Makefile.am Makefile.in
-DIST_SUBDIRS = $(SUBDIRS)
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign src/auth/basic/Makefile
-Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && \
- CONFIG_HEADERS= CONFIG_LINKS= \
- CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status
-uninstall-info-am:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @set fnord $(MAKEFLAGS); amf=$$2; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
- @set fnord $(MAKEFLAGS); amf=$$2; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique $(LISP)
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
- || etags $(ETAGS_ARGS) $$tags $$unique $(LISP)
-
-GTAGS:
- here=`CDPATH=: && cd $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
-
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ../../..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @for file in $(DISTFILES); do \
- if test -f $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- $(mkinstalldirs) "$(distdir)/$$dir"; \
- fi; \
- if test -d $$d/$$file; then \
- cp -pR $$d/$$file $(distdir) \
- || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- for subdir in $(SUBDIRS); do \
- if test "$$subdir" = .; then :; else \
- test -d $(distdir)/$$subdir \
- || mkdir $(distdir)/$$subdir \
- || exit 1; \
- (cd $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" \
- distdir=../$(distdir)/$$subdir \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
-
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-uninstall-am: uninstall-info-am
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
- clean-generic clean-recursive distclean distclean-generic \
- distclean-recursive distclean-tags distdir dvi dvi-am \
- dvi-recursive info info-am info-recursive install install-am \
- install-data install-data-am install-data-recursive \
- install-exec install-exec-am install-exec-recursive \
- install-info install-info-am install-info-recursive install-man \
- install-recursive install-strip installcheck installcheck-am \
- installdirs installdirs-am installdirs-recursive \
- maintainer-clean maintainer-clean-generic \
- maintainer-clean-recursive mostlyclean mostlyclean-generic \
- mostlyclean-recursive tags tags-recursive uninstall \
- uninstall-am uninstall-info-am uninstall-info-recursive \
- uninstall-recursive
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# Makefile.in generated automatically by automake 1.5 from Makefile.am.
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ../../..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = @program_transform_name@
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_alias = @host_alias@
-host_triplet = @host@
-AMTAR = @AMTAR@
-AR = @AR@
-AR_R = @AR_R@
-AUTH_LIBS = @AUTH_LIBS@
-AUTH_MODULES = @AUTH_MODULES@
-AUTH_OBJS = @AUTH_OBJS@
-AWK = @AWK@
-BASIC_AUTH_HELPERS = @BASIC_AUTH_HELPERS@
-CC = @CC@
-CGIEXT = @CGIEXT@
-CPP = @CPP@
-CRYPTLIB = @CRYPTLIB@
-CXX = @CXX@
-DEPDIR = @DEPDIR@
-DIGEST_AUTH_HELPERS = @DIGEST_AUTH_HELPERS@
-ERR_DEFAULT_LANGUAGE = @ERR_DEFAULT_LANGUAGE@
-ERR_LANGUAGES = @ERR_LANGUAGES@
-EXEEXT = @EXEEXT@
-EXTERNAL_ACL_HELPERS = @EXTERNAL_ACL_HELPERS@
-FALSE = @FALSE@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LIBDLMALLOC = @LIBDLMALLOC@
-LIBREGEX = @LIBREGEX@
-LIB_MALLOC = @LIB_MALLOC@
-LN = @LN@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MKDIR = @MKDIR@
-MV = @MV@
-NTLM_AUTH_HELPERS = @NTLM_AUTH_HELPERS@
-OBJEXT = @OBJEXT@
-OPT_DEFAULT_HOSTS = @OPT_DEFAULT_HOSTS@
-PACKAGE = @PACKAGE@
-PERL = @PERL@
-RANLIB = @RANLIB@
-REGEXLIB = @REGEXLIB@
-REPL_LIBS = @REPL_LIBS@
-REPL_OBJS = @REPL_OBJS@
-REPL_POLICIES = @REPL_POLICIES@
-RM = @RM@
-SH = @SH@
-SNMPLIB = @SNMPLIB@
-SSLLIB = @SSLLIB@
-STORE_LIBS = @STORE_LIBS@
-STORE_MODULES = @STORE_MODULES@
-STORE_MODULE_SUBDIRS = @STORE_MODULE_SUBDIRS@
-STORE_OBJS = @STORE_OBJS@
-TRUE = @TRUE@
-VERSION = @VERSION@
-XTRA_LIBS = @XTRA_LIBS@
-XTRA_OBJS = @XTRA_OBJS@
-am__include = @am__include@
-am__quote = @am__quote@
-install_sh = @install_sh@
-makesnmplib = @makesnmplib@
-
-SUBDIRS =
-subdir = src/auth/digest
-mkinstalldirs = $(SHELL) $(top_srcdir)/cfgaux/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/include/autoconf.h
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-
-RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
- uninstall-info-recursive all-recursive install-data-recursive \
- install-exec-recursive installdirs-recursive install-recursive \
- uninstall-recursive check-recursive installcheck-recursive
-DIST_COMMON = Makefile.am Makefile.in
-DIST_SUBDIRS = $(SUBDIRS)
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign src/auth/digest/Makefile
-Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && \
- CONFIG_HEADERS= CONFIG_LINKS= \
- CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status
-uninstall-info-am:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @set fnord $(MAKEFLAGS); amf=$$2; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
- @set fnord $(MAKEFLAGS); amf=$$2; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique $(LISP)
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
- || etags $(ETAGS_ARGS) $$tags $$unique $(LISP)
-
-GTAGS:
- here=`CDPATH=: && cd $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
-
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ../../..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @for file in $(DISTFILES); do \
- if test -f $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- $(mkinstalldirs) "$(distdir)/$$dir"; \
- fi; \
- if test -d $$d/$$file; then \
- cp -pR $$d/$$file $(distdir) \
- || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- for subdir in $(SUBDIRS); do \
- if test "$$subdir" = .; then :; else \
- test -d $(distdir)/$$subdir \
- || mkdir $(distdir)/$$subdir \
- || exit 1; \
- (cd $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" \
- distdir=../$(distdir)/$$subdir \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
-
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-uninstall-am: uninstall-info-am
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
- clean-generic clean-recursive distclean distclean-generic \
- distclean-recursive distclean-tags distdir dvi dvi-am \
- dvi-recursive info info-am info-recursive install install-am \
- install-data install-data-am install-data-recursive \
- install-exec install-exec-am install-exec-recursive \
- install-info install-info-am install-info-recursive install-man \
- install-recursive install-strip installcheck installcheck-am \
- installdirs installdirs-am installdirs-recursive \
- maintainer-clean maintainer-clean-generic \
- maintainer-clean-recursive mostlyclean mostlyclean-generic \
- mostlyclean-recursive tags tags-recursive uninstall \
- uninstall-am uninstall-info-am uninstall-info-recursive \
- uninstall-recursive
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# Makefile.in generated automatically by automake 1.5 from Makefile.am.
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ../../..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = @program_transform_name@
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_alias = @host_alias@
-host_triplet = @host@
-AMTAR = @AMTAR@
-AR = @AR@
-AR_R = @AR_R@
-AUTH_LIBS = @AUTH_LIBS@
-AUTH_MODULES = @AUTH_MODULES@
-AUTH_OBJS = @AUTH_OBJS@
-AWK = @AWK@
-BASIC_AUTH_HELPERS = @BASIC_AUTH_HELPERS@
-CC = @CC@
-CGIEXT = @CGIEXT@
-CPP = @CPP@
-CRYPTLIB = @CRYPTLIB@
-CXX = @CXX@
-DEPDIR = @DEPDIR@
-DIGEST_AUTH_HELPERS = @DIGEST_AUTH_HELPERS@
-ERR_DEFAULT_LANGUAGE = @ERR_DEFAULT_LANGUAGE@
-ERR_LANGUAGES = @ERR_LANGUAGES@
-EXEEXT = @EXEEXT@
-EXTERNAL_ACL_HELPERS = @EXTERNAL_ACL_HELPERS@
-FALSE = @FALSE@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LIBDLMALLOC = @LIBDLMALLOC@
-LIBREGEX = @LIBREGEX@
-LIB_MALLOC = @LIB_MALLOC@
-LN = @LN@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MKDIR = @MKDIR@
-MV = @MV@
-NTLM_AUTH_HELPERS = @NTLM_AUTH_HELPERS@
-OBJEXT = @OBJEXT@
-OPT_DEFAULT_HOSTS = @OPT_DEFAULT_HOSTS@
-PACKAGE = @PACKAGE@
-PERL = @PERL@
-RANLIB = @RANLIB@
-REGEXLIB = @REGEXLIB@
-REPL_LIBS = @REPL_LIBS@
-REPL_OBJS = @REPL_OBJS@
-REPL_POLICIES = @REPL_POLICIES@
-RM = @RM@
-SH = @SH@
-SNMPLIB = @SNMPLIB@
-SSLLIB = @SSLLIB@
-STORE_LIBS = @STORE_LIBS@
-STORE_MODULES = @STORE_MODULES@
-STORE_MODULE_SUBDIRS = @STORE_MODULE_SUBDIRS@
-STORE_OBJS = @STORE_OBJS@
-TRUE = @TRUE@
-VERSION = @VERSION@
-XTRA_LIBS = @XTRA_LIBS@
-XTRA_OBJS = @XTRA_OBJS@
-am__include = @am__include@
-am__quote = @am__quote@
-install_sh = @install_sh@
-makesnmplib = @makesnmplib@
-
-SUBDIRS =
-subdir = src/auth/ntlm
-mkinstalldirs = $(SHELL) $(top_srcdir)/cfgaux/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/include/autoconf.h
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-
-RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
- uninstall-info-recursive all-recursive install-data-recursive \
- install-exec-recursive installdirs-recursive install-recursive \
- uninstall-recursive check-recursive installcheck-recursive
-DIST_COMMON = Makefile.am Makefile.in
-DIST_SUBDIRS = $(SUBDIRS)
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign src/auth/ntlm/Makefile
-Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && \
- CONFIG_HEADERS= CONFIG_LINKS= \
- CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status
-uninstall-info-am:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @set fnord $(MAKEFLAGS); amf=$$2; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
- @set fnord $(MAKEFLAGS); amf=$$2; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique $(LISP)
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
- || etags $(ETAGS_ARGS) $$tags $$unique $(LISP)
-
-GTAGS:
- here=`CDPATH=: && cd $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
-
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ../../..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @for file in $(DISTFILES); do \
- if test -f $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- $(mkinstalldirs) "$(distdir)/$$dir"; \
- fi; \
- if test -d $$d/$$file; then \
- cp -pR $$d/$$file $(distdir) \
- || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- for subdir in $(SUBDIRS); do \
- if test "$$subdir" = .; then :; else \
- test -d $(distdir)/$$subdir \
- || mkdir $(distdir)/$$subdir \
- || exit 1; \
- (cd $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" \
- distdir=../$(distdir)/$$subdir \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
-
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-uninstall-am: uninstall-info-am
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
- clean-generic clean-recursive distclean distclean-generic \
- distclean-recursive distclean-tags distdir dvi dvi-am \
- dvi-recursive info info-am info-recursive install install-am \
- install-data install-data-am install-data-recursive \
- install-exec install-exec-am install-exec-recursive \
- install-info install-info-am install-info-recursive install-man \
- install-recursive install-strip installcheck installcheck-am \
- installdirs installdirs-am installdirs-recursive \
- maintainer-clean maintainer-clean-generic \
- maintainer-clean-recursive mostlyclean mostlyclean-generic \
- mostlyclean-recursive tags tags-recursive uninstall \
- uninstall-am uninstall-info-am uninstall-info-recursive \
- uninstall-recursive
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
projects / thirdparty / squid.git / commitdiff
