arm: Remove remainder of xpress board code

When this platform was removed the config header file was missed. Remove
that now.

Fixes: ddfc00400965 ("arm: Remove xpress board")
Signed-off-by: Tom Rini <trini@konsulko.com>

diff --git a/include/configs/xpress.h b/include/configs/xpress.h
deleted file mode 100644 (file)
index aa4dd3e..0000000
--- a/include/configs/xpress.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
- *
- * Configuration settings for the CCV xPress board
- */
-#ifndef __XPRESS_CONFIG_H
-#define __XPRESS_CONFIG_H
-
-#include "mx6_common.h"
-#include <asm/mach-imx/gpio.h>
-
-#define CFG_MXC_UART_BASE              MX6UL_UART7_BASE_ADDR
-
-/* MMC Configs */
-#define CFG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
-
-/* Miscellaneous configurable options */
-
-/* Physical Memory Map */
-#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE                        (128 << 20)
-
-#define CFG_SYS_SDRAM_BASE             PHYS_SDRAM
-#define CFG_SYS_INIT_RAM_ADDR  IRAM_BASE_ADDR
-#define CFG_SYS_INIT_RAM_SIZE  IRAM_SIZE
-
-/* Environment is in stored in the eMMC boot partition */
-
-#define CFG_FEC_ENET_DEV               0
-#define CFG_FEC_MXC_PHYADDR          0x0
-
-#define CFG_EXTRA_ENV_SETTINGS \
-       "script=boot.scr\0" \
-       "image=zImage\0" \
-       "console=ttymxc6\0" \
-       "fdt_high=0xffffffff\0" \
-       "initrd_high=0xffffffff\0" \
-       "fdt_file=undefined\0" \
-       "fdt_addr=0x83000000\0" \
-       "boot_fdt=try\0" \
-       "ip_dyn=yes\0" \
-       "mmcdev="__stringify(CONFIG_ENV_MMC_DEVICE_INDEX)"\0" \
-       "mmcpart=1\0" \
-       "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
-       "mmcautodetect=yes\0" \
-       "mmcargs=setenv bootargs console=${console},${baudrate} " \
-               "root=${mmcroot}\0" \
-       "loadbootscript=" \
-               "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-       "bootscript=echo Running bootscript from mmc ...; " \
-               "source\0" \
-       "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-       "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-       "mmcboot=echo Booting from mmc ...; " \
-               "run mmcargs; " \
-               "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-                       "if run loadfdt; then " \
-                               "bootz ${loadaddr} - ${fdt_addr}; " \
-                       "else " \
-                               "if test ${boot_fdt} = try; then " \
-                                       "bootz; " \
-                               "else " \
-                                       "echo WARN: Cannot load the DT; " \
-                               "fi; " \
-                       "fi; " \
-               "else " \
-                       "bootz; " \
-               "fi;\0" \
-       "uboot=ccv/u-boot.imx\0"                                        \
-       "uboot_start=0x2\0"                                             \
-       "uboot_size=0x3fe\0"                                            \
-       "update_uboot=if tftp ${uboot}; then "                          \
-               "if itest ${filesize} > 0; then "                       \
-                       "mmc dev 0 1;"                                  \
-                       "setexpr blkc ${filesize} / 0x200;"             \
-                       "setexpr blkc ${blkc} + 1;"                     \
-                       "if itest ${blkc} <= ${uboot_size}; then "      \
-                               "mmc write ${loadaddr} ${uboot_start} " \
-                                       "${blkc};"                      \
-                       "fi;"                                           \
-               "fi; fi;"                                               \
-               "setenv filesize; setenv blkc\0"                        \
-       "update_bootpart=mmc bootbus 0 2 1 2;mmc partconf 0 1 1 0\0"
-
-#endif /* __XPRESS_CONFIG_H */