]> git.ipfire.org Git - thirdparty/kernel/linux.git/commitdiff
arm64: dts: ti: k3-j784s4-main.dtsi: Move c71_3 node to appropriate order
authorAbhash Kumar Jha <a-kumar2@ti.com>
Mon, 12 Jan 2026 08:51:12 +0000 (14:21 +0530)
committerNishanth Menon <nm@ti.com>
Wed, 14 Jan 2026 17:05:39 +0000 (11:05 -0600)
The device tree nodes should be ordered by unit addresses in ascending
order.

Correct the order by moving the c71_3 DSP node at the end as it has a
higher unit address.

Signed-off-by: Abhash Kumar Jha <a-kumar2@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://patch.msgid.link/20260112085113.3476193-2-a-kumar2@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi

index 0160fe0da98388680d98007908fb8ba950745121..5b7830a3c0975ba20b3cfc6038fd6990979c8ab5 100644 (file)
@@ -6,19 +6,6 @@
  */
 
 &cbass_main {
-       c71_3: dsp@67800000 {
-               compatible = "ti,j721s2-c71-dsp";
-               reg = <0x00 0x67800000 0x00 0x00080000>,
-                     <0x00 0x67e00000 0x00 0x0000c000>;
-               reg-names = "l2sram", "l1dram";
-               resets = <&k3_reset 40 1>;
-               firmware-name = "j784s4-c71_3-fw";
-               ti,sci = <&sms>;
-               ti,sci-dev-id = <40>;
-               ti,sci-proc-ids = <0x33 0xff>;
-               status = "disabled";
-       };
-
        pcie2_rc: pcie@2920000 {
                compatible = "ti,j784s4-pcie-host";
                reg = <0x00 0x02920000 0x00 0x1000>,
                        status = "disabled";
                };
        };
+
+       c71_3: dsp@67800000 {
+               compatible = "ti,j721s2-c71-dsp";
+               reg = <0x00 0x67800000 0x00 0x00080000>,
+                     <0x00 0x67e00000 0x00 0x0000c000>;
+               reg-names = "l2sram", "l1dram";
+               resets = <&k3_reset 40 1>;
+               firmware-name = "j784s4-c71_3-fw";
+               ti,sci = <&sms>;
+               ti,sci-dev-id = <40>;
+               ti,sci-proc-ids = <0x33 0xff>;
+               status = "disabled";
+       };
 };
 
 &scm_conf {