doc: switch Solaris support to illumos

For a long time, the Solaris support in chrony wasn't tested on a real
Solaris system, but on illumos/OpenIndiana, which was forked from
OpenSolaris when it was discontinued in 2010.

While Solaris and illumos might have not diverged enough to make a
difference for chrony, replace Solaris in the documentation with illumos
to make it clear which system is actually supported by the chrony
project.

diff --git a/README b/README
index 2447bfff542342cbdbb2c810b4456737d082039f..00214a544ea6a22ab0b4acbe6dd44d96f41dbc98 100644 (file)
--- a/README
+++ b/README
@@ -28,7 +28,7 @@ What will chrony run on?
 ========================
 
 The software is known to work on Linux, FreeBSD, NetBSD, macOS and
-Solaris.  Closely related systems may work too.  Any other system will
+illumos.  Closely related systems may work too.  Any other system will
 likely require a porting exercise.
 
 How do I set it up?

diff --git a/configure b/configure
index ac6939cee2de77d9ebdbdee8af22968d40295aa0..8041d4e4631d0eb7c7af1518ed0e8d976c300595 100755 (executable)
--- a/configure
+++ b/configure
@@ -479,7 +479,7 @@ case $OPERATINGSYSTEM in
           add_def FEAT_PRIVDROP
           priv_ops="ADJUSTTIMEX SETTIME BINDSOCKET"
         fi
-        echo "Configuring for Solaris (" $SYSTEM "SunOS version" $VERSION ")" 
+        echo "Configuring for illumos (" $SYSTEM "SunOS version" $VERSION ")"
     ;;                                                                        
     * )
         echo "error: $SYSTEM is not supported (yet?)"

diff --git a/doc/chrony.conf.adoc b/doc/chrony.conf.adoc
index 21a8d752865ffa2962ceea1e21e36488ea490a14..3568edb25d43aeb1b32c0ee38e88a6d28996502a 100644 (file)
--- a/doc/chrony.conf.adoc
+++ b/doc/chrony.conf.adoc
@@ -1238,7 +1238,7 @@ This directive specifies the maximum assumed drift (frequency error) of the
 system clock. It limits the frequency adjustment that *chronyd* is allowed to
 use to correct the measured drift. It is an additional limit to the maximum
 adjustment that can be set by the system driver (100000 ppm on Linux, 500 ppm
-on FreeBSD, NetBSD, and macOS 10.13+, 32500 ppm on Solaris).
+on FreeBSD, NetBSD, and macOS 10.13+, 32500 ppm on illumos).
 +
 By default, the maximum assumed drift is 500000 ppm, i.e. the adjustment is
 limited by the system driver rather than this directive.
@@ -1277,7 +1277,7 @@ all supported systems with the exception of macOS 12 or earlier).
 +
 For each system there is a maximum frequency offset of the clock that can be set
 by the driver. On Linux it is 100000 ppm, on FreeBSD, NetBSD and macOS 10.13+ it
-is 5000 ppm, and on Solaris it is 32500 ppm. Also, due to a kernel limitation,
+is 5000 ppm, and on illumos it is 32500 ppm. Also, due to a kernel limitation,
 setting *maxslewrate* on FreeBSD, NetBSD, macOS 10.13+ to a value between 500
 ppm and 5000 ppm will effectively set it to 500 ppm.
 +
@@ -2524,7 +2524,7 @@ file when the <<chronyc.adoc#rekey,*rekey*>> command is issued by *chronyc*).
 [[lock_all]]*lock_all*::
 The *lock_all* directive will lock the *chronyd* process into RAM so that it
 will never be paged out. This can result in lower and more consistent latency.
-The directive is supported on Linux, FreeBSD, NetBSD, and Solaris.
+The directive is supported on Linux, FreeBSD, NetBSD, and illumos.
 
 [[pidfile]]*pidfile* _file_::
 Unless *chronyd* is started with the *-Q* option, it writes its process ID
@@ -2564,7 +2564,7 @@ ptpport 319
 ----
 
 [[sched_priority]]*sched_priority* _priority_::
-On Linux, FreeBSD, NetBSD, and Solaris, the *sched_priority* directive will
+On Linux, FreeBSD, NetBSD, and illumos, the *sched_priority* directive will
 select the SCHED_FIFO real-time scheduler at the specified priority (which must
 be between 0 and 100). On macOS, this option must have either a value of 0 (the
 default) to disable the thread time constraint policy or 1 for the policy to be
@@ -2590,7 +2590,7 @@ The *user* directive sets the name of the system user to which *chronyd* will
 switch after start in order to drop root privileges.
 +
 On Linux, *chronyd* needs to be compiled with support for the *libcap* library.
-On macOS, FreeBSD, NetBSD and Solaris *chronyd* forks into two processes.
+On macOS, FreeBSD, NetBSD and illumos *chronyd* forks into two processes.
 The child process retains root privileges, but can only perform a very limited
 range of privileged system calls on behalf of the parent.
 +

diff --git a/doc/chronyd.adoc b/doc/chronyd.adoc
index 06b87182a842e2ab0620346509256985b4062d4e..7ba991d06a9edd7ee4f52dc3010624569cfa21bf 100644 (file)
--- a/doc/chronyd.adoc
+++ b/doc/chronyd.adoc
@@ -100,7 +100,7 @@ directive in the configuration file. This option is useful if you want to stop
 and restart *chronyd* briefly for any reason, e.g. to install a new version.
 However, it should be used only on systems where the kernel can maintain clock
 compensation whilst not under *chronyd*'s control (i.e. Linux, FreeBSD, NetBSD,
-Solaris, and macOS 10.13 or later).
+illumos, and macOS 10.13 or later).
 
 *-R*::
 When this option is used, the <<chrony.conf.adoc#initstepslew,*initstepslew*>>
@@ -141,7 +141,7 @@ after start in order to drop root privileges. It overrides the
 _@DEFAULT_USER@_.
 +
 On Linux, *chronyd* needs to be compiled with support for the *libcap* library.
-On macOS, FreeBSD, NetBSD and Solaris *chronyd* forks into two processes.
+On macOS, FreeBSD, NetBSD, and illumos *chronyd* forks into two processes.
 The child process retains root privileges, but can only perform a very limited
 range of privileged system calls on behalf of the parent.
 
@@ -181,7 +181,7 @@ limited.
 The filters cannot be enabled with the *mailonchange* directive.
 
 *-P* _priority_::
-On Linux, FreeBSD, NetBSD, and Solaris, this option will select the SCHED_FIFO
+On Linux, FreeBSD, NetBSD, and illumos this option will select the SCHED_FIFO
 real-time scheduler at the specified priority (which must be between 0 and
 100). On macOS, this option must have either a value of 0 to disable the thread
 time constraint policy or 1 for the policy to be enabled. Other systems do not
@@ -189,7 +189,7 @@ support this option. The default value is 0.
 
 *-m*::
 This option will lock *chronyd* into RAM so that it will never be paged out.
-This mode is only supported on Linux, FreeBSD, NetBSD, and Solaris.
+This mode is only supported on Linux, FreeBSD, NetBSD, and illumos.
 
 *-x*::
 This option disables the control of the system clock. *chronyd* will not try to

diff --git a/sys_solaris.c b/sys_solaris.c
index 24949cbb661fc7d5e6ee0ee84cbb7831f12d5211..3210ef0eb318e747dd558a55e5d3905f7a43522b 100644 (file)
--- a/sys_solaris.c
+++ b/sys_solaris.c
@@ -21,7 +21,7 @@
 
   =======================================================================
 
-  Driver file for Solaris operating system
+  Driver file for illumos operating system (previously Solaris)
   */
 
 #include "config.h"