#include "ewah/ewok.h"
#include "fsmonitor.h"
#include "fsmonitor-ipc.h"
+#include "name-hash.h"
#include "run-command.h"
#include "strbuf.h"
#include "trace2.h"
static size_t handle_path_with_trailing_slash(
struct index_state *istate, const char *name, int pos);
+/*
+ * Use the name-hash to do a case-insensitive cache-entry lookup with
+ * the pathname and invalidate the cache-entry.
+ *
+ * Returns the number of cache-entries that we invalidated.
+ */
+static size_t handle_using_name_hash_icase(
+ struct index_state *istate, const char *name)
+{
+ struct cache_entry *ce = NULL;
+
+ ce = index_file_exists(istate, name, strlen(name), 1);
+ if (!ce)
+ return 0;
+
+ /*
+ * A case-insensitive search in the name-hash using the
+ * observed pathname found a cache-entry, so the observed path
+ * is case-incorrect. Invalidate the cache-entry and use the
+ * correct spelling from the cache-entry to invalidate the
+ * untracked-cache. Since we now have sparse-directories in
+ * the index, the observed pathname may represent a regular
+ * file or a sparse-index directory.
+ *
+ * Note that we should not have seen FSEvents for a
+ * sparse-index directory, but we handle it just in case.
+ *
+ * Either way, we know that there are not any cache-entries for
+ * children inside the cone of the directory, so we don't need to
+ * do the usual scan.
+ */
+ trace_printf_key(&trace_fsmonitor,
+ "fsmonitor_refresh_callback MAP: '%s' '%s'",
+ name, ce->name);
+
+ /*
+ * NEEDSWORK: We used the name-hash to find the correct
+ * case-spelling of the pathname in the cache-entry[], so
+ * technically this is a tracked file or a sparse-directory.
+ * It should not have any entries in the untracked-cache, so
+ * we should not need to use the case-corrected spelling to
+ * invalidate the the untracked-cache. So we may not need to
+ * do this. For now, I'm going to be conservative and always
+ * do it; we can revisit this later.
+ */
+ untracked_cache_invalidate_trimmed_path(istate, ce->name, 0);
+
+ invalidate_ce_fsm(ce);
+ return 1;
+}
+
+/*
+ * Use the dir-name-hash to find the correct-case spelling of the
+ * directory. Use the canonical spelling to invalidate all of the
+ * cache-entries within the matching cone.
+ *
+ * Returns the number of cache-entries that we invalidated.
+ */
+static size_t handle_using_dir_name_hash_icase(
+ struct index_state *istate, const char *name)
+{
+ struct strbuf canonical_path = STRBUF_INIT;
+ int pos;
+ size_t len = strlen(name);
+ size_t nr_in_cone;
+
+ if (name[len - 1] == '/')
+ len--;
+
+ if (!index_dir_find(istate, name, len, &canonical_path))
+ return 0; /* name is untracked */
+
+ if (!memcmp(name, canonical_path.buf, canonical_path.len)) {
+ strbuf_release(&canonical_path);
+ /*
+ * NEEDSWORK: Our caller already tried an exact match
+ * and failed to find one. They called us to do an
+ * ICASE match, so we should never get an exact match,
+ * so we could promote this to a BUG() here if we
+ * wanted to. It doesn't hurt anything to just return
+ * 0 and go on because we should never get here. Or we
+ * could just get rid of the memcmp() and this "if"
+ * clause completely.
+ */
+ BUG("handle_using_dir_name_hash_icase(%s) did not exact match",
+ name);
+ }
+
+ trace_printf_key(&trace_fsmonitor,
+ "fsmonitor_refresh_callback MAP: '%s' '%s'",
+ name, canonical_path.buf);
+
+ /*
+ * The dir-name-hash only tells us the corrected spelling of
+ * the prefix. We have to use this canonical path to do a
+ * lookup in the cache-entry array so that we repeat the
+ * original search using the case-corrected spelling.
+ */
+ strbuf_addch(&canonical_path, '/');
+ pos = index_name_pos(istate, canonical_path.buf,
+ canonical_path.len);
+ nr_in_cone = handle_path_with_trailing_slash(
+ istate, canonical_path.buf, pos);
+ strbuf_release(&canonical_path);
+ return nr_in_cone;
+}
+
/*
* The daemon sent an observed pathname without a trailing slash.
* (This is the normal case.) We do not know if it is a tracked or
else
nr_in_cone = handle_path_without_trailing_slash(istate, name, pos);
+ /*
+ * If we did not find an exact match for this pathname or any
+ * cache-entries with this directory prefix and we're on a
+ * case-insensitive file system, try again using the name-hash
+ * and dir-name-hash.
+ */
+ if (!nr_in_cone && ignore_case) {
+ nr_in_cone = handle_using_name_hash_icase(istate, name);
+ if (!nr_in_cone)
+ nr_in_cone = handle_using_dir_name_hash_icase(
+ istate, name);
+ }
+
if (nr_in_cone)
trace_printf_key(&trace_fsmonitor,
"fsmonitor_refresh_callback CNT: %d",
#
# The setup is a little contrived.
#
-test_expect_failure CASE_INSENSITIVE_FS 'fsmonitor subdir case wrong on disk' '
+test_expect_success CASE_INSENSITIVE_FS 'fsmonitor subdir case wrong on disk' '
test_when_finished "stop_daemon_delete_repo subdir_case_wrong" &&
git init subdir_case_wrong &&
grep -q "dir1/DIR2/dir3/file3.*pos -3" "$PWD/subdir_case_wrong.log1" &&
+ # Verify that we get a mapping event to correct the case.
+ grep -q "MAP:.*dir1/DIR2/dir3/file3.*dir1/dir2/dir3/file3" \
+ "$PWD/subdir_case_wrong.log1" &&
+
# The refresh-callbacks should have caused "git status" to clear
# the CE_FSMONITOR_VALID bit on each of those files and caused
# the worktree scan to visit them and mark them as modified.
grep -q " M AAA" "$PWD/subdir_case_wrong.out" &&
grep -q " M zzz" "$PWD/subdir_case_wrong.out" &&
-
- # Expect Breakage: with the case confusion, the "(pos -3)" causes
- # the client to not clear the CE_FSMONITOR_VALID bit and therefore
- # status will not rescan the file and therefore not report it as dirty.
grep -q " M dir1/dir2/dir3/file3" "$PWD/subdir_case_wrong.out"
'
-test_expect_failure CASE_INSENSITIVE_FS 'fsmonitor file case wrong on disk' '
+test_expect_success CASE_INSENSITIVE_FS 'fsmonitor file case wrong on disk' '
test_when_finished "stop_daemon_delete_repo file_case_wrong" &&
git init file_case_wrong &&
GIT_TRACE_FSMONITOR="$PWD/file_case_wrong-try3.log" \
git -C file_case_wrong --no-optional-locks status --short \
>"$PWD/file_case_wrong-try3.out" &&
+
+ # Verify that we get a mapping event to correct the case.
+ grep -q "fsmonitor_refresh_callback MAP:.*dir1/dir2/dir3/FILE-3-A.*dir1/dir2/dir3/file-3-a" \
+ "$PWD/file_case_wrong-try3.log" &&
+ grep -q "fsmonitor_refresh_callback MAP:.*dir1/dir2/dir4/file-4-a.*dir1/dir2/dir4/FILE-4-A" \
+ "$PWD/file_case_wrong-try3.log" &&
+
# FSEvents are in observed case.
grep -q "fsmonitor_refresh_callback.*FILE-3-A.*pos -3" "$PWD/file_case_wrong-try3.log" &&
grep -q "fsmonitor_refresh_callback.*file-4-a.*pos -9" "$PWD/file_case_wrong-try3.log" &&
- # Expect Breakage: with the case confusion, the "(pos-3)" and
- # "(pos -9)" causes the client to not clear the CE_FSMONITOR_VALID
- # bit and therefore status will not rescan the files and therefore
- # not report them as dirty.
+ # The refresh-callbacks should have caused "git status" to clear
+ # the CE_FSMONITOR_VALID bit on each of those files and caused
+ # the worktree scan to visit them and mark them as modified.
grep -q " M dir1/dir2/dir3/file-3-a" "$PWD/file_case_wrong-try3.out" &&
grep -q " M dir1/dir2/dir4/FILE-4-A" "$PWD/file_case_wrong-try3.out"
'
projects / thirdparty / git.git / commitdiff
