Vendor command to configure TWT

This commit defines a new vendor interface
QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT to configure TWT.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>

diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h
index 28fa741cbbda4b51d77b4041478e54c32b747a6c..af1a3ca894f7d0dffc3c44b2d27d69db0b660199 100644 (file)
--- a/src/common/qca-vendor.h
+++ b/src/common/qca-vendor.h
@@ -668,6 +668,9 @@ enum qca_radiotap_vendor_ids {
  *     This command can only be used in STA mode and the STA must be
  *     associated with an AP when the command is issued. Uses attributes
  *     defined in enum qca_wlan_vendor_attr_config_tspec.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT: Vendor subcommand to configure TWT.
+ *     Uses attributes defined in enum qca_wlan_vendor_attr_config_twt.
  */
 enum qca_nl80211_vendor_subcmds {
        QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
@@ -848,6 +851,7 @@ enum qca_nl80211_vendor_subcmds {
        QCA_NL80211_VENDOR_SUBCMD_UPDATE_STA_INFO = 188,
        QCA_NL80211_VENDOR_SUBCMD_DRIVER_DISCONNECT_REASON = 189,
        QCA_NL80211_VENDOR_SUBCMD_CONFIG_TSPEC = 190,
+       QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT = 191,
 };
 
 enum qca_wlan_vendor_attr {
@@ -7376,6 +7380,61 @@ enum qca_wlan_vendor_attr_wifi_test_config {
        QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST - 1,
 };
 
+/**
+ * enum qca_wlan_twt_operation - Operation of the config TWT request
+ * Values for %QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_OPERATION.
+ *
+ * @QCA_WLAN_TWT_SET: Setup a TWT session. Required parameters are configured
+ * through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum
+ * qca_wlan_vendor_attr_twt_setup.
+ *
+ * @QCA_WLAN_TWT_GET: Get the configured TWT parameters. Required parameters are
+ * obtained through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum
+ * qca_wlan_vendor_attr_twt_setup.
+ *
+ * @QCA_WLAN_TWT_TERMINATE: Terminate the TWT session. Does not carry any
+ * parameters. Valid only after the TWT session is setup.
+ *
+ * @QCA_WLAN_TWT_SUSPEND: Terminate the TWT session. Does not carry any
+ * parameters. Valid only after the TWT session is setup.
+ *
+ * @QCA_WLAN_TWT_RESUME: Resume the TWT session. Required parameters are
+ * configured through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum
+ * qca_wlan_vendor_attr_twt_resume.
+ */
+enum qca_wlan_twt_operation {
+       QCA_WLAN_TWT_SET = 0,
+       QCA_WLAN_TWT_GET = 1,
+       QCA_WLAN_TWT_TERMINATE = 2,
+       QCA_WLAN_TWT_SUSPEND = 3,
+       QCA_WLAN_TWT_RESUME = 4,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_config_twt: Defines attributes used by
+ * %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_OPERATION: u8 attribute. Specify the TWT
+ * operation of this request. Possible values are defined in enum
+ * qca_wlan_twt_operation. The parameters for the respective operation is
+ * specified through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS: Nested attribute representing the
+ * parameters configured for TWT. These parameters are represented by
+ * enum qca_wlan_vendor_attr_twt_setup or enum qca_wlan_vendor_attr_twt_resume
+ * based on the operation.
+ */
+enum qca_wlan_vendor_attr_config_twt {
+       QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_INVALID = 0,
+       QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_OPERATION = 1,
+       QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS = 2,
+
+       /* keep last */
+       QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_AFTER_LAST,
+       QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_MAX =
+       QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_AFTER_LAST - 1,
+};
+
 /**
  * enum qca_wlan_vendor_attr_bss_filter - Used by the vendor command
  * QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER.
@@ -7527,7 +7586,8 @@ enum qca_wlan_vendor_attr_nan_params {
  * enum qca_wlan_vendor_attr_twt_setup: Represents attributes for
  * TWT (Target Wake Time) setup request. These attributes are sent as part of
  * %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SETUP and
- * %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION.
+ * %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION. Also used by
+ * attributes through %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT.
  *
  * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST: Flag attribute.
  * Disable (flag attribute not present) - Individual TWT
@@ -7606,7 +7666,8 @@ enum qca_wlan_vendor_attr_twt_setup {
  * enum qca_wlan_vendor_attr_twt_resume: Represents attributes for
  * TWT (Target Wake Time) resume request. These attributes are sent as part of
  * %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_RESUME and
- * %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION.
+ * %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION. Also used by
+ * attributes through %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT.
  *
  * @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT: Optional (u8)
  * This attribute is used as the SP offset which is the offset from