arm64: dts: qcom: ipq5332: Add QPIC SPI NAND controller support

Add device tree nodes for QPIC SPI NAND flash controller support
on IPQ5332 SoC.

The IPQ5332 SoC includes a QPIC controller that supports SPI NAND flash
devices with hardware ECC capabilities and DMA support through BAM
(Bus Access Manager).

Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260306113940.1654304-3-quic_mdalam@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 45fc512a3bab221c0d99f819294abf63369987da..e227730d99a66a120ba43e83c088785b58d18493 100644 (file)
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -423,6 +423,39 @@
                        status = "disabled";
                };
 
+               qpic_bam: dma-controller@7984000 {
+                       compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+                       reg = <0x07984000 0x1c000>;
+                       interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&gcc GCC_QPIC_AHB_CLK>;
+                       clock-names = "bam_clk";
+                       #dma-cells = <1>;
+                       qcom,ee = <0>;
+                       status = "disabled";
+               };
+
+               qpic_nand: spi@79b0000 {
+                       compatible = "qcom,ipq5332-snand", "qcom,ipq9574-snand";
+                       reg = <0x079b0000 0x10000>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       clocks = <&gcc GCC_QPIC_CLK>,
+                                <&gcc GCC_QPIC_AHB_CLK>,
+                                <&gcc GCC_QPIC_IO_MACRO_CLK>;
+                       clock-names = "core",
+                                     "aon",
+                                     "iom";
+
+                       dmas = <&qpic_bam 0>,
+                              <&qpic_bam 1>,
+                              <&qpic_bam 2>;
+                       dma-names = "tx",
+                                   "rx",
+                                   "cmd";
+
+                       status = "disabled";
+               };
+
                usb: usb@8af8800 {
                        compatible = "qcom,ipq5332-dwc3", "qcom,dwc3";
                        reg = <0x08af8800 0x400>;