arm64: dts: imx8mm-phyboard-polis-rdk: Add USB1 OC pin configuration

Add USB1 OC pin configuration for proper over-current detection.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
index be470cfb03d75de7d6d3fbb1add65c71fbe8f286..35d8c5ab35472320b6657744c9f7965acab99f49 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
@@ -285,6 +285,8 @@
        over-current-active-low;
        samsung,picophy-pre-emp-curr-control = <3>;
        samsung,picophy-dc-vol-level-adjust = <7>;
+       pinctrl-0 = <&pinctrl_usbotg1>;
+       pinctrl-names = "default";
        srp-disable;
        vbus-supply = <&reg_usb_otg1_vbus>;
        status = "okay";
@@ -458,6 +460,12 @@
                >;
        };
 
+       pinctrl_usbotg1: usbotg1grp {
+               fsl,pins = <
+                       MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC     0x00
+               >;
+       };
+
        pinctrl_usdhc1: usdhc1grp {
                fsl,pins = <
                        MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK         0x182