Merge tag 'imx-dt64-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo...

i.MX arm64 device tree changes for 6.20:

- New board support: i.MX8MP/i.MX91/i.MX93/i.MX95 FRDM, ifm VHIP4
  EvalBoard, Apalis iMX8QP, TQ-Systems MBLS1028A/MBLS1028A-IND
- A number of series from Alexander Stein improving lpcg indices
  description for tqma8xxs board, moving BMAN/QMAN buffers for
  tqmls1046a, refreshing tqma8mpql-mba8mpxl support a bit, adding HDMI
  audio support for tqma8mpql-mba8mp-ras314 etc.
- A series from Chancel Liu adding various audio features for
  imx93-14x14-evk board
- A series from Francesco Dolcini enabling hdmi_pai device for
  imx8mp-verdin and imx8mp-toradex-smarc
- A couple of changes from Francesco Valla enabling more devices
  and correcting CAN transceiver gpio for imx93-11x11-frdm
- A few changes from Frank Li adding DDR perf support for imx8qm, adding
  camera support for imx8mp-evk, enabling thermal support for i.MX91, etc.
- A series from Haibo Chen adding flexcan support for imx943-evk and
  imx952-evk boards
- A series from Krzysztof Kozlowski fixing up coding style issues
- A couple of changes from Marek Vasut updating Data Modul i.MX8M Plus
  eDM SBC DT to rev.903, using GPU_CGC as core clock for GPU on i.MX95
- A series from Markus Niebel to clean up imx8mm-tqma8mqml board
  regulators
- A couple of series from Peng Fan replacing xceiver-supply with phys
  for NXP EVK boards, improving imx952-evk board support
- A series from Sebastian Krzyszkowiak to refresh imx8mq-librem5 support
- A couple of series from Stefano Radaelli to improve
  imx93-var-som-symphony and imx8mp-var-som support
- Other random changes for various boards

* tag 'imx-dt64-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (104 commits)
  arm64: dts: freescale: imx95: Add support for i.MX95 15x15 FRDM board
  arm64: dts: imx91-11x11-frdm: fix CAN transceiver gpio
  arm64: dts: imx93-11x11-frdm: enable additional devices
  arm64: dts: imx93-11x11-frdm: Add MQS audio support
  arm64: dts: imx952-evk: Add nxp,ctrl-ids for scmi misc
  arm64: dts: imx952-evk: Add flexcan support
  arm64: dts: imx952-evk: Enable TPM[3,6]
  arm64: dts: imx952-evk: Enable wdog3
  arm64: dts: imx952-evk: Enable USB[1,2]
  arm64: dts: imx952-evk: Enable SPI7
  arm64: dts: imx952-evk: Enable UART5
  arm64: dts: imx952-evk: Enable I2C[2,3,4,6,7] bus
  arm64: dts: imx952-evk: Change the usdhc1_200mhz drive strength to DSE4
  arm64: dts: imx952: Add idle-states node
  arm64: dts: imx8mn: Add ifm VHIP4 EvalBoard v1 and v2
  arm64: dts: imx8mn: Add SNVS LPGPR
  arm64: dts: imx8mq-librem5: Don't set mic-cfg for wm8962
  arm64: dts: imx8mq-librem5: Set cap-power-off-card for usdhc2
  arm64: dts: imx8mq-librem5: Limit uSDHC2 frequency to 50MHz
  arm64: dts: imx8mq-librem5: Enable SNVS RTC
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>