dt-bindings: iio: adc: ad7768-1: add new supported parts

Add compatibles for supported parts in the ad7768-1 family:
	ADAQ7767-1, ADAQ7768-1 and ADAQ7769-1

Add property and checks for AFF gain, supported by ADAQ7767-1
and ADAQ7769-1, and for PGA gain, supported by ADAQ7768-1
and ADAQ7769-1:
	adi,aaf-gain-bp
	pga-gpios

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
index c06d0fc791d39348d1bb0f26d200ae0f1be7a6da..dfa2d7fa9fb37e8460e0478598cc28993d172381 100644 (file)
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
@@ -4,18 +4,26 @@
 $id: http://devicetree.org/schemas/iio/adc/adi,ad7768-1.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices AD7768-1 ADC device driver
+title: Analog Devices AD7768-1 ADC family
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
 
 description: |
-  Datasheet at:
-    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7768-1.pdf
+  Analog Devices AD7768-1 24-Bit Single Channel Low Power sigma-delta ADC family
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7768-1.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/adaq7767-1.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/adaq7768-1.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/adaq7769-1.pdf
 
 properties:
   compatible:
-    const: adi,ad7768-1
+    enum:
+      - adi,ad7768-1
+      - adi,adaq7767-1
+      - adi,adaq7768-1
+      - adi,adaq7769-1
 
   reg:
     maxItems: 1
@@ -58,6 +66,25 @@ properties:
     description:
       ADC reference voltage supply
 
+  adi,aaf-gain-bp:
+    description: |
+       Specifies the gain applied by the Analog Anti-Aliasing Filter (AAF)
+       to the ADC input in basis points (one hundredth of a percent).
+       The hardware gain is determined by which input pin(s) the signal goes
+       through into the AAF. The possible connections are:
+       * For the ADAQ7767-1: Input connected to IN1±, IN2± or IN3±.
+       * For the ADAQ7769-1: OUT_PGA pin connected to IN1_AAF+, IN2_AAF+,
+         or IN3_AAF+.
+    enum: [1430, 3640, 10000]
+    default: 10000
+
+  pga-gpios:
+    description:
+      GAIN 0, GAIN1 and GAIN2 pins for gain selection. For devices that have
+      PGA configuration input pins, pga-gpios must be defined.
+    minItems: 3
+    maxItems: 3
+
   adi,sync-in-gpios:
     maxItems: 1
     description:
@@ -147,6 +174,35 @@ patternProperties:
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
+  # AAF Gain property only applies to ADAQ7767-1 and ADAQ7769-1 devices
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adaq7767-1
+              - adi,adaq7769-1
+    then:
+      required:
+        - adi,aaf-gain-bp
+    else:
+      properties:
+        adi,aaf-gain-bp: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adaq7768-1
+              - adi,adaq7769-1
+    then:
+      required:
+        - pga-gpios
+    else:
+      properties:
+        pga-gpios: false
+
 unevaluatedProperties: false
 
 examples: