-I$(srctree)/lib/mbedtls/port \
-I$(srctree)/lib/mbedtls/external/mbedtls \
-I$(srctree)/lib/mbedtls/external/mbedtls/include) \
- $(if $(CONFIG_$(XPL_)SYS_THUMB_BUILD), \
+ $(if $(CONFIG_$(PHASE_)SYS_THUMB_BUILD), \
$(if $(CONFIG_HAS_THUMB2), \
$(if $(CONFIG_CPU_V7M), \
-I$(srctree)/arch/arm/thumb1/include), \
libs-y += drivers/
libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
-libs-$(CONFIG_$(XPL_)ALTERA_SDRAM) += drivers/ddr/altera/
+libs-$(CONFIG_$(PHASE_)ALTERA_SDRAM) += drivers/ddr/altera/
libs-y += drivers/usb/cdns3/
libs-y += drivers/usb/dwc3/
libs-y += drivers/usb/common/
endif
# Choose between ARM/Thumb instruction sets
-ifeq ($(CONFIG_$(XPL_)SYS_THUMB_BUILD),y)
+ifeq ($(CONFIG_$(PHASE_)SYS_THUMB_BUILD),y)
AFLAGS_IMPLICIT_IT := $(call as-option,-Wa$(comma)-mimplicit-it=always)
PF_CPPFLAGS_ARM := $(AFLAGS_IMPLICIT_IT) \
$(call cc-option, -mthumb -mthumb-interwork,\
endif
# Only test once
-ifeq ($(CONFIG_$(XPL_)SYS_THUMB_BUILD),y)
+ifeq ($(CONFIG_$(PHASE_)SYS_THUMB_BUILD),y)
archprepare: checkthumb checkgcc6
checkthumb:
#
# http://sourceware.org/bugzilla/show_bug.cgi?id=12532
#
-ifeq ($(CONFIG_$(XPL_)SYS_THUMB_BUILD),y)
+ifeq ($(CONFIG_$(PHASE_)SYS_THUMB_BUILD),y)
ifeq ($(GAS_BUG_12532),)
export GAS_BUG_12532:=$(shell if [ $(call binutils-version) -lt 0222 ] ; \
then echo y; else echo n; fi)
# some files can only build in ARM mode
-ifdef CONFIG_$(XPL_)SYS_THUMB_BUILD
+ifdef CONFIG_$(PHASE_)SYS_THUMB_BUILD
CFLAGS_cpu.o := -marm
endif
# some files can only build in ARM or THUMB2, not THUMB1
-ifdef CONFIG_$(XPL_)SYS_THUMB_BUILD
+ifdef CONFIG_$(PHASE_)SYS_THUMB_BUILD
ifndef CONFIG_HAS_THUMB2
CFLAGS_cpu.o := -marm
obj-$(CONFIG_ARMV7_NONSEC) += exception_level.o
endif
-ifneq ($(CONFIG_$(XPL_)SKIP_LOWLEVEL_INIT),y)
+ifneq ($(CONFIG_$(PHASE_)SKIP_LOWLEVEL_INIT),y)
obj-y += lowlevel_init.o
endif
ifndef CONFIG_$(PHASE_)TIMER
obj-$(CONFIG_SYS_ARCH_TIMER) += generic_timer.o
endif
-ifndef CONFIG_$(XPL_)SYS_DCACHE_OFF
+ifndef CONFIG_$(PHASE_)SYS_DCACHE_OFF
obj-y += cache_v8.o
obj-y += cache.o
endif
else
obj-$(CONFIG_ARCH_SUNXI) += fel_utils.o
endif
-obj-$(CONFIG_$(XPL_)ARMV8_SEC_FIRMWARE_SUPPORT) += sec_firmware.o sec_firmware_asm.o
+obj-$(CONFIG_$(PHASE_)ARMV8_SEC_FIRMWARE_SUPPORT) += sec_firmware.o sec_firmware_asm.o
ifdef CONFIG_XPL_BUILD
obj-$(CONFIG_SPL_RECOVER_DATA_SECTION) += spl_data.o
# some files can only build in ARM or THUMB2, not THUMB1
-ifdef CONFIG_$(XPL_)SYS_THUMB_BUILD
+ifdef CONFIG_$(PHASE_)SYS_THUMB_BUILD
asflags-$(CONFIG_HAS_THUMB2) += -DCONFIG_THUMB2_KERNEL
ifndef CONFIG_HAS_THUMB2
endif
endif
-ifdef CONFIG_$(XPL_)SYS_THUMB_BUILD
+ifdef CONFIG_$(PHASE_)SYS_THUMB_BUILD
ifndef CONFIG_HAS_THUMB2
CFLAGS_cache.o := -marm
ifneq ($(CONFIG_XPL_BUILD),y)
obj-$(CONFIG_IMX_BOOTAUX) += imx_bootaux.o
endif
-obj-$(CONFIG_$(XPL_)SATA) += sata.o
+obj-$(CONFIG_$(PHASE_)SATA) += sata.o
obj-$(CONFIG_IMX_HAB) += hab.o
obj-$(CONFIG_SYSCOUNTER_TIMER) += syscounter.o
endif
obj-y += sys_info.o
obj-y += ddr.o
-ifeq ($(CONFIG_$(XPL_)SKIP_LOWLEVEL_INIT),)
+ifeq ($(CONFIG_$(PHASE_)SKIP_LOWLEVEL_INIT),)
obj-y += emif4.o
endif
obj-y += board.o
obj-y += dram.o
obj-y += timer.o
-ifndef CONFIG_$(XPL_)SKIP_LOWLEVEL_INIT
+ifndef CONFIG_$(PHASE_)SKIP_LOWLEVEL_INIT
obj-y += lowlevel_init.o
endif
# some files can only build in ARM or THUMB2, not THUMB1
-ifdef CONFIG_$(XPL_)SYS_THUMB_BUILD
+ifdef CONFIG_$(PHASE_)SYS_THUMB_BUILD
ifndef CONFIG_HAS_THUMB2
CFLAGS_cpu.o := -marm
obj-$(CONFIG_ARMV7_PSCI) += psci.o
endif
-obj-$(CONFIG_$(XPL_)STM32MP15_PWR) += pwr_regulator.o
+obj-$(CONFIG_$(PHASE_)STM32MP15_PWR) += pwr_regulator.o
obj-$(CONFIG_OF_SYSTEM_SETUP) += fdt.o
obj-y += board.o board2.o
obj-y += cache.o
obj-$(CONFIG_TEGRA_CLKRST) += clock.o
-obj-$(CONFIG_$(XPL_)TEGRA_CRYPTO) += crypto.o
+obj-$(CONFIG_$(PHASE_)TEGRA_CRYPTO) += crypto.o
obj-$(CONFIG_TEGRA_PMC) += powergate.o
obj-y += xusb-padctl-dummy.o
# (C) Copyright 2010,2011 Nvidia Corporation.
obj-$(CONFIG_XPL_BUILD) += cpu.o
-obj-$(CONFIG_$(XPL_)CMD_EBTUPDATE) += bct.o
+obj-$(CONFIG_$(PHASE_)CMD_EBTUPDATE) += bct.o
# The AVP is ARMv4T architecture so we must use special compiler
# flags for any startup files it might use.
# Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
obj-$(CONFIG_XPL_BUILD) += cpu.o
-obj-$(CONFIG_$(XPL_)CMD_EBTUPDATE) += bct.o
+obj-$(CONFIG_$(PHASE_)CMD_EBTUPDATE) += bct.o
obj-y += clock.o
obj-$(CONFIG_MP) += mp.o
obj-$(CONFIG_XPL_BUILD) += spl.o handoff.o psu_spl_init.o
obj-$(CONFIG_SPL_ZYNQMP_DRAM_ECC_INIT) += ecc_spl_init.o
-obj-$(CONFIG_$(XPL_)ZYNQMP_PSU_INIT_ENABLED) += psu_spl_init.o
+obj-$(CONFIG_$(PHASE_)ZYNQMP_PSU_INIT_ENABLED) += psu_spl_init.o
ifndef CONFIG_XPL_BUILD
obj-$(CONFIG_CMD_ZYNQMP) += zynqmp.o
ARCH_FLAGS = -march=$(RISCV_MARCH) -mabi=$(ABI) \
-mcmodel=$(CMODEL)
-ifeq ($(CONFIG_$(XPL_)FRAMEPOINTER),y)
+ifeq ($(CONFIG_$(PHASE_)FRAMEPOINTER),y)
ARCH_FLAGS += -fno-omit-frame-pointer
endif
obj-$(CONFIG_CMD_GO) += boot.o
obj-y += cache.o
obj-$(CONFIG_SIFIVE_CACHE) += sifive_cache.o
-ifeq ($(CONFIG_$(XPL_)RISCV_MMODE),y)
-obj-$(CONFIG_$(XPL_)RISCV_ACLINT) += aclint_ipi.o
+ifeq ($(CONFIG_$(PHASE_)RISCV_MMODE),y)
+obj-$(CONFIG_$(PHASE_)RISCV_ACLINT) += aclint_ipi.o
obj-$(CONFIG_ANDES_PLICSW) += andes_plicsw.o
else
obj-$(CONFIG_SBI) += sbi.o
obj-$(CONFIG_SBI_IPI) += sbi_ipi.o
endif
obj-y += interrupts.o
-ifeq ($(CONFIG_$(XPL_)SYSRESET),)
+ifeq ($(CONFIG_$(PHASE_)SYSRESET),)
obj-y += reset.o
endif
obj-y += setjmp.o
-obj-$(CONFIG_$(XPL_)SMP) += smp.o
+obj-$(CONFIG_$(PHASE_)SMP) += smp.o
obj-$(CONFIG_XPL_BUILD) += spl.o
obj-y += fdt_fixup.o
obj-$(CONFIG_$(SPL)CMD_BDI) += bdinfo.o
obj-$(CONFIG_PCI) += pci_io.o
obj-$(CONFIG_CMD_BOOTM) += bootm.o
obj-$(CONFIG_CMD_BOOTZ) += bootm.o
-obj-$(CONFIG_$(SPL_)ACPIGEN) += acpi_table.o
+obj-$(CONFIG_$(PHASE_)ACPIGEN) += acpi_table.o
# SPDX-License-Identifier: GPL-2.0+
ifeq ($(CONFIG_EFI_APP),)
-ifdef CONFIG_$(XPL_)X86_64
+ifdef CONFIG_$(PHASE_)X86_64
head-y := arch/x86/cpu/start64.o
else
ifeq ($(CONFIG_$(PHASE_)X86_16BIT_INIT),y)
# (C) Copyright 2002
# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
-ifeq ($(CONFIG_$(XPL_)X86_64),y)
+ifeq ($(CONFIG_$(PHASE_)X86_64),y)
extra-y = start64.o
else
ifeq ($(CONFIG_$(PHASE_)X86_16BIT_INIT),y)
obj-y += cpu_x86.o
endif
-ifndef CONFIG_$(XPL_)X86_64
+ifndef CONFIG_$(PHASE_)X86_64
AFLAGS_REMOVE_call32.o := -mregparm=3 \
$(if $(CONFIG_EFI_STUB_64BIT),-march=i386 -m32)
AFLAGS_call32.o := -fpic -fshort-wchar \
ifndef CONFIG_SYS_COREBOOT
obj-$(CONFIG_$(PHASE_)X86_32BIT_INIT) += irq.o
endif
-ifndef CONFIG_$(XPL_)X86_64
-obj-$(CONFIG_$(XPL_)SMP) += mp_init.o
+ifndef CONFIG_$(PHASE_)X86_64
+obj-$(CONFIG_$(PHASE_)SMP) += mp_init.o
endif
obj-y += mtrr.o
obj-$(CONFIG_PCI) += pci.o
-ifndef CONFIG_$(XPL_)X86_64
+ifndef CONFIG_$(PHASE_)X86_64
obj-$(CONFIG_SMP) += sipi_vector.o
endif
obj-y += turbo.o
obj-$(CONFIG_HAVE_ACPI_RESUME) += wakeup.o
-ifeq ($(CONFIG_$(XPL_)X86_64),y)
+ifeq ($(CONFIG_$(PHASE_)X86_64),y)
obj-y += x86_64/
else
obj-y += i386/
obj-y += fast_spi.o
obj-y += lpc.o
obj-y += lpss.o
-obj-$(CONFIG_$(XPL_)INTEL_GENERIC_WIFI) += generic_wifi.o
+obj-$(CONFIG_$(PHASE_)INTEL_GENERIC_WIFI) += generic_wifi.o
ifndef CONFIG_EFI_APP
obj-$(CONFIG_$(PHASE_)X86_32BIT_INIT) += microcode.o
-ifndef CONFIG_$(XPL_)X86_64
+ifndef CONFIG_$(PHASE_)X86_64
obj-y += microcode.o
endif
endif
ifdef CONFIG_HAVE_FSP
obj-y += fsp_configs.o ivybridge.o
else
-obj-$(CONFIG_$(XPL_)X86_32BIT_INIT) += cpu.o
+obj-$(CONFIG_$(PHASE_)X86_32BIT_INIT) += cpu.o
obj-y += early_me.o
obj-y += lpc.o
obj-y += northbridge.o
ifndef CONFIG_XPL_BUILD
obj-y += sata.o
endif
-obj-$(CONFIG_$(XPL_)X86_32BIT_INIT) += sdram.o
-ifndef CONFIG_$(XPL_)X86_32BIT_INIT
+obj-$(CONFIG_$(PHASE_)X86_32BIT_INIT) += sdram.o
+ifndef CONFIG_$(PHASE_)X86_32BIT_INIT
obj-y += sdram_nop.o
endif
endif
#
# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
-ifndef CONFIG_$(XPL_)X86_64
+ifndef CONFIG_$(PHASE_)X86_64
obj-y += car.o
endif
obj-y += dram.o
obj-$(CONFIG_CMD_BOOTM) += bootm.o
endif
obj-y += cmd_boot.o
-obj-$(CONFIG_$(XPL_)COREBOOT_SYSINFO) += coreboot/
+obj-$(CONFIG_$(PHASE_)COREBOOT_SYSINFO) += coreboot/
obj-$(CONFIG_SEABIOS) += coreboot_table.o
obj-y += early_cmos.o
obj-y += e820.o
ifdef CONFIG_EFI_STUB
-ifeq ($(CONFIG_$(XPL_)X86_64),)
+ifeq ($(CONFIG_$(PHASE_)X86_64),)
extra-y += $(EFI_CRT0) $(EFI_RELOC)
endif
# Copyright (C) 2018 Robert Bosch Power Tools GmbH
#
-ifeq ($(CONFIG_$(XPL_)SKIP_LOWLEVEL_INIT),)
+ifeq ($(CONFIG_$(PHASE_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif
endif
obj-$(I2C_COMMON) += i2c_common.o
obj-$(CONFIG_FSL_USE_PCA9547_MUX) += i2c_mux.o
-obj-$(CONFIG_$(XPL_)VID) += vid.o
+obj-$(CONFIG_$(PHASE_)VID) += vid.o
obj-$(CONFIG_FSL_QIXIS) += qixis.o
ifndef CONFIG_XPL_BUILD
obj-$(CONFIG_ID_EEPROM) += sys_eeprom.o
obj-$(CONFIG_TARGET_P3041DS) += ics307_clk.o
obj-$(CONFIG_TARGET_P4080DS) += ics307_clk.o
obj-$(CONFIG_TARGET_P5040DS) += ics307_clk.o
-ifeq ($(CONFIG_$(XPL_)POWER_LEGACY),y)
+ifeq ($(CONFIG_$(PHASE_)POWER_LEGACY),y)
obj-$(CONFIG_POWER_PFUZE100) += pfuze.o
endif
obj-$(CONFIG_DM_PMIC_PFUZE100) += pfuze.o
ifeq ($(CONFIG_ARCH_STM32MP),y)
obj-$(CONFIG_SET_DFU_ALT_INFO) += stm32mp_dfu.o
-obj-$(CONFIG_$(XPL_)DFU_VIRT) += stm32mp_dfu_virt.o
+obj-$(CONFIG_$(PHASE_)DFU_VIRT) += stm32mp_dfu_virt.o
endif
obj-$(CONFIG_TYPEC_STUSB160X) += stusb160x.o
#
# Copyright (C) 2015 Toby Churchill Ltd - http://www.toby-churchill.com/
-ifeq ($(CONFIG_$(XPL_)SKIP_LOWLEVEL_INIT),)
+ifeq ($(CONFIG_$(PHASE_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif
#
# Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
-ifeq ($(CONFIG_$(XPL_)SKIP_LOWLEVEL_INIT),)
+ifeq ($(CONFIG_$(PHASE_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif
#
# Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
-ifeq ($(CONFIG_$(XPL_)SKIP_LOWLEVEL_INIT),)
+ifeq ($(CONFIG_$(PHASE_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif
#
# Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
-ifeq ($(CONFIG_$(XPL_)SKIP_LOWLEVEL_INIT),)
+ifeq ($(CONFIG_$(PHASE_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif
endif
endif
-obj-$(CONFIG_$(XPL_)ZYNQMP_PSU_INIT_ENABLED) += $(init-objs)
+obj-$(CONFIG_$(PHASE_)ZYNQMP_PSU_INIT_ENABLED) += $(init-objs)
ifdef CONFIG_XPL_BUILD
ifneq ($(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE),"")
obj-$(CONFIG_$(PHASE_)OF_LIBFDT) += image-fdt.o
obj-$(CONFIG_$(PHASE_)FIT_SIGNATURE) += fdt_region.o
obj-$(CONFIG_$(PHASE_)FIT) += image-fit.o
-obj-$(CONFIG_$(XPL_)MULTI_DTB_FIT) += boot_fit.o common_fit.o
+obj-$(CONFIG_$(PHASE_)MULTI_DTB_FIT) += boot_fit.o common_fit.o
obj-$(CONFIG_$(PHASE_)IMAGE_PRE_LOAD) += image-pre-load.o
obj-$(CONFIG_$(PHASE_)IMAGE_SIGN_INFO) += image-sig.o
obj-$(CONFIG_$(PHASE_)FIT_SIGNATURE) += image-fit-sig.o
obj-$(CONFIG_ARCH_OMAP2PLUS) += ti/
endif # !CONFIG_XPL_BUILD
-obj-$(CONFIG_$(XPL_)CMD_TLV_EEPROM) += tlv_eeprom.o
+obj-$(CONFIG_$(PHASE_)CMD_TLV_EEPROM) += tlv_eeprom.o
obj-$(CONFIG_CMD_BCM_EXT_UTILS) += broadcom/
Finally, add the test to the build by adding to the Makefile in the same
directory::
- obj-$(CONFIG_$(XPL_)CMDLINE) += wibble.o
+ obj-$(CONFIG_$(PHASE_)CMDLINE) += wibble.o
Note that CMDLINE is never enabled in SPL, so this test will only be present in
U-Boot proper. See below for how to do SPL tests.
You can add an extra Kconfig check if needed::
- ifneq ($(CONFIG_$(XPL_)WIBBLE),)
- obj-$(CONFIG_$(XPL_)CMDLINE) += wibble.o
+ ifneq ($(CONFIG_$(PHASE_)WIBBLE),)
+ obj-$(CONFIG_$(PHASE_)CMDLINE) += wibble.o
endif
Each suite can have an optional init and uninit function. These are run before
obj-$(CONFIG_$(PHASE_)SPI) += spi/
obj-$(CONFIG_$(PHASE_)TIMER) += timer/
obj-$(CONFIG_$(PHASE_)VIRTIO) += virtio/
-obj-$(CONFIG_$(XPL_)DM_MAILBOX) += mailbox/
-obj-$(CONFIG_$(XPL_)REMOTEPROC) += remoteproc/
-obj-$(CONFIG_$(XPL_)SYSINFO) += sysinfo/
+obj-$(CONFIG_$(PHASE_)DM_MAILBOX) += mailbox/
+obj-$(CONFIG_$(PHASE_)REMOTEPROC) += remoteproc/
+obj-$(CONFIG_$(PHASE_)SYSINFO) += sysinfo/
obj-$(CONFIG_$(PHASE_)SM) += sm/
obj-$(CONFIG_$(PHASE_)TPM) += tpm/
-obj-$(CONFIG_$(XPL_)NVME) += nvme/
+obj-$(CONFIG_$(PHASE_)NVME) += nvme/
obj-$(CONFIG_XEN) += xen/
-obj-$(CONFIG_$(XPL_)FPGA) += fpga/
-obj-$(CONFIG_$(XPL_)VIDEO) += video/
+obj-$(CONFIG_$(PHASE_)FPGA) += fpga/
+obj-$(CONFIG_$(PHASE_)VIDEO) += video/
obj-y += bus/
obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR) += ddr/fsl/
obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
-obj-$(CONFIG_$(XPL_)ALTERA_SDRAM) += ddr/altera/
+obj-$(CONFIG_$(PHASE_)ALTERA_SDRAM) += ddr/altera/
obj-$(CONFIG_ARCH_IMX8M) += ddr/imx/imx8m/
obj-$(CONFIG_IMX8ULP_DRAM) += ddr/imx/imx8ulp/
obj-$(CONFIG_ARCH_IMX9) += ddr/imx/imx9/
obj-$(CONFIG_DWC_AHCI) += dwc_ahci.o
obj-$(CONFIG_AHCI) += ahci-uclass.o
-obj-$(CONFIG_$(XPL_)AHCI_PCI) += ahci-pci.o
+obj-$(CONFIG_$(PHASE_)AHCI_PCI) += ahci-pci.o
obj-$(CONFIG_SCSI_AHCI) += ahci.o
obj-$(CONFIG_DWC_AHSATA) += dwc_ahsata.o
obj-$(CONFIG_FSL_SATA) += fsl_sata.o
obj-$(CONFIG_$(PHASE_)BLK) += blk-uclass.o
-ifndef CONFIG_$(XPL_)BLK
+ifndef CONFIG_$(PHASE_)BLK
obj-$(CONFIG_SPL_LEGACY_BLOCK) += blk_legacy.o
endif
obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o
endif
-obj-$(CONFIG_$(XPL_)TI_SYSC) += ti-sysc.o
+obj-$(CONFIG_$(PHASE_)TI_SYSC) += ti-sysc.o
obj-$(CONFIG_$(PHASE_)ACPIGEN) += acpi.o
obj-$(CONFIG_$(PHASE_)DEVRES) += devres.o
obj-$(CONFIG_$(PHASE_)DM_DEVICE_REMOVE) += device-remove.o
-obj-$(CONFIG_$(XPL_)SIMPLE_BUS) += simple-bus.o
+obj-$(CONFIG_$(PHASE_)SIMPLE_BUS) += simple-bus.o
obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
obj-$(CONFIG_DM) += dump.o
obj-$(CONFIG_$(PHASE_)REGMAP) += regmap.o
obj-$(CONFIG_$(PHASE_)SYSCON) += syscon-uclass.o
-obj-$(CONFIG_$(XPL_)OF_LIVE) += of_access.o of_addr.o
+obj-$(CONFIG_$(PHASE_)OF_LIVE) += of_access.o of_addr.o
ifndef CONFIG_DM_DEV_READ_INLINE
obj-$(CONFIG_OF_CONTROL) += read.o
endif
-obj-$(CONFIG_$(XPL_)OF_PLATDATA) += read.o
+obj-$(CONFIG_$(PHASE_)OF_PLATDATA) += read.o
obj-$(CONFIG_OF_CONTROL) += of_extra.o ofnode.o read_extra.o ofnode_graph.o
ccflags-$(CONFIG_DM_DEBUG) += -DDEBUG
# (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
# Copyright (C) 2014-2025 Altera Corporation <www.altera.com>
-ifdef CONFIG_$(XPL_)ALTERA_SDRAM
+ifdef CONFIG_$(PHASE_)ALTERA_SDRAM
obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += sdram_gen5.o sequencer.o
obj-$(CONFIG_TARGET_SOCFPGA_ARRIA10) += sdram_arria10.o
obj-$(CONFIG_TARGET_SOCFPGA_STRATIX10) += sdram_soc64.o sdram_s10.o
# Copyright (C) 2012 Samsung Electronics
# Lukasz Majewski <l.majewski@samsung.com>
-obj-$(CONFIG_$(XPL_)DFU) += dfu.o
-obj-$(CONFIG_$(XPL_)DFU_MMC) += dfu_mmc.o
-obj-$(CONFIG_$(XPL_)DFU_MTD) += dfu_mtd.o
-obj-$(CONFIG_$(XPL_)DFU_NAND) += dfu_nand.o
-obj-$(CONFIG_$(XPL_)DFU_RAM) += dfu_ram.o
-obj-$(CONFIG_$(XPL_)DFU_SF) += dfu_sf.o
-obj-$(CONFIG_$(XPL_)DFU_WRITE_ALT) += dfu_alt.o
-obj-$(CONFIG_$(XPL_)DFU_VIRT) += dfu_virt.o
-obj-$(CONFIG_$(XPL_)DFU_SCSI) += dfu_scsi.o
+obj-$(CONFIG_$(PHASE_)DFU) += dfu.o
+obj-$(CONFIG_$(PHASE_)DFU_MMC) += dfu_mmc.o
+obj-$(CONFIG_$(PHASE_)DFU_MTD) += dfu_mtd.o
+obj-$(CONFIG_$(PHASE_)DFU_NAND) += dfu_nand.o
+obj-$(CONFIG_$(PHASE_)DFU_RAM) += dfu_ram.o
+obj-$(CONFIG_$(PHASE_)DFU_SF) += dfu_sf.o
+obj-$(CONFIG_$(PHASE_)DFU_WRITE_ALT) += dfu_alt.o
+obj-$(CONFIG_$(PHASE_)DFU_VIRT) += dfu_virt.o
+obj-$(CONFIG_$(PHASE_)DFU_SCSI) += dfu_scsi.o
obj-$(CONFIG_FIRMWARE) += firmware-uclass.o
-obj-$(CONFIG_$(XPL_)ARM_PSCI_FW) += psci.o
+obj-$(CONFIG_$(PHASE_)ARM_PSCI_FW) += psci.o
obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o
obj-$(CONFIG_SANDBOX) += firmware-sandbox.o
obj-$(CONFIG_ZYNQMP_FIRMWARE) += firmware-zynqmp.o
endif
obj-$(CONFIG_$(PHASE_)DM_GPIO) += gpio-uclass.o
-obj-$(CONFIG_$(XPL_)DM_PCA953X) += pca953x_gpio.o
+obj-$(CONFIG_$(PHASE_)DM_PCA953X) += pca953x_gpio.o
obj-$(CONFIG_ADI_GPIO) += gpio-adi-adsp.o
obj-$(CONFIG_ASPEED_GPIO) += gpio-aspeed.o
obj-$(CONFIG_HIKEY_GPIO) += hi6220_gpio.o
obj-$(CONFIG_HSDK_CREG_GPIO) += hsdk-creg-gpio.o
obj-$(CONFIG_IMX_RGPIO2P) += imx_rgpio2p.o
-obj-$(CONFIG_$(XPL_)PALMAS_GPIO) += palmas_gpio.o
+obj-$(CONFIG_$(PHASE_)PALMAS_GPIO) += palmas_gpio.o
obj-$(CONFIG_PIC32_GPIO) += pic32_gpio.o
obj-$(CONFIG_OCTEON_GPIO) += octeon_gpio.o
obj-$(CONFIG_MVEBU_GPIO) += mvebu_gpio.o
obj-$(CONFIG_MSM_GPIO) += msm_gpio.o
-obj-$(CONFIG_$(XPL_)PCF8575_GPIO) += pcf8575_gpio.o
+obj-$(CONFIG_$(PHASE_)PCF8575_GPIO) += pcf8575_gpio.o
obj-$(CONFIG_$(PHASE_)QCOM_PMIC_GPIO) += qcom_pmic_gpio.o
obj-$(CONFIG_MT7620_GPIO) += mt7620_gpio.o
obj-$(CONFIG_MT7621_GPIO) += mt7621_gpio.o
obj-$(CONFIG_SIFIVE_GPIO) += sifive-gpio.o
obj-$(CONFIG_NOMADIK_GPIO) += nmk_gpio.o
obj-$(CONFIG_MAX7320_GPIO) += max7320_gpio.o
-obj-$(CONFIG_$(XPL_)MAX77663_GPIO) += max77663_gpio.o
+obj-$(CONFIG_$(PHASE_)MAX77663_GPIO) += max77663_gpio.o
obj-$(CONFIG_SL28CPLD_GPIO) += sl28cpld-gpio.o
obj-$(CONFIG_ADP5588_GPIO) += adp5588_gpio.o
obj-$(CONFIG_ZYNQMP_GPIO_MODEPIN) += zynqmp_gpio_modepin.o
obj-$(CONFIG_SLG7XL45106_I2C_GPO) += gpio_slg7xl45106.o
obj-$(CONFIG_FTGPIO010) += ftgpio010.o
-obj-$(CONFIG_$(SPL_)ADP5585_GPIO) += adp5585_gpio.o
+obj-$(CONFIG_$(PHASE_)ADP5585_GPIO) += adp5585_gpio.o
obj-$(CONFIG_RZG2L_GPIO) += rzg2l-gpio.o
#
# (C) Copyright 2000-2007
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-obj-$(CONFIG_$(XPL_)DM_I2C) += i2c-uclass.o
-ifdef CONFIG_$(XPL_)ACPIGEN
-obj-$(CONFIG_$(XPL_)DM_I2C) += acpi_i2c.o
+obj-$(CONFIG_$(PHASE_)DM_I2C) += i2c-uclass.o
+ifdef CONFIG_$(PHASE_)ACPIGEN
+obj-$(CONFIG_$(PHASE_)DM_I2C) += acpi_i2c.o
endif
-obj-$(CONFIG_$(XPL_)DM_I2C_GPIO) += i2c-gpio.o
-obj-$(CONFIG_$(XPL_)I2C_CROS_EC_TUNNEL) += cros_ec_tunnel.o
-obj-$(CONFIG_$(XPL_)I2C_CROS_EC_LDO) += cros_ec_ldo.o
+obj-$(CONFIG_$(PHASE_)DM_I2C_GPIO) += i2c-gpio.o
+obj-$(CONFIG_$(PHASE_)I2C_CROS_EC_TUNNEL) += cros_ec_tunnel.o
+obj-$(CONFIG_$(PHASE_)I2C_CROS_EC_LDO) += cros_ec_ldo.o
-obj-$(CONFIG_$(XPL_)SYS_I2C_LEGACY) += i2c_core.o
+obj-$(CONFIG_$(PHASE_)SYS_I2C_LEGACY) += i2c_core.o
obj-$(CONFIG_SYS_I2C_ADI) += adi_i2c.o
obj-$(CONFIG_SYS_I2C_ASPEED) += ast_i2c.o
obj-$(CONFIG_SYS_I2C_AST2600) += ast2600_i2c.o
obj-$(CONFIG_SYS_I2C_XILINX_XIIC) += xilinx_xiic.o
obj-$(CONFIG_TEGRA186_BPMP_I2C) += tegra186_bpmp_i2c.o
-obj-$(CONFIG_$(XPL_)I2C_MUX) += muxes/
+obj-$(CONFIG_$(PHASE_)I2C_MUX) += muxes/
obj-$(CONFIG_LED_BCM6753) += led_bcm6753.o
obj-$(CONFIG_LED_BCM6858) += led_bcm6858.o
obj-$(CONFIG_LED_PWM) += led_pwm.o
-obj-$(CONFIG_$(XPL_)LED_GPIO) += led_gpio.o
+obj-$(CONFIG_$(PHASE_)LED_GPIO) += led_gpio.o
obj-$(CONFIG_LED_CORTINA) += led_cortina.o
obj-$(CONFIG_LED_LP5562) += led_lp5562.o
# Copyright (c) 2016, NVIDIA CORPORATION.
#
-obj-$(CONFIG_$(XPL_)DM_MAILBOX) += mailbox-uclass.o
+obj-$(CONFIG_$(PHASE_)DM_MAILBOX) += mailbox-uclass.o
obj-$(CONFIG_APPLE_MBOX) += apple-mbox.o
obj-$(CONFIG_IMX_MU_MBOX) += imx-mailbox.o
obj-$(CONFIG_SANDBOX_MBOX) += sandbox-mbox.o
obj-$(CONFIG_SANDBOX) += swap_case.o
endif
-ifdef CONFIG_$(XPL_)DM_I2C
+ifdef CONFIG_$(PHASE_)DM_I2C
ifndef CONFIG_XPL_BUILD
obj-$(CONFIG_SANDBOX) += i2c_eeprom_emul.o
obj-$(CONFIG_USB_HUB_USB251XB) += usb251xb.o
obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
obj-$(CONFIG_FSL_IIM) += fsl_iim.o
obj-$(CONFIG_FSL_SEC_MON) += fsl_sec_mon.o
-obj-$(CONFIG_$(XPL_)FS_LOADER) += fs_loader.o
+obj-$(CONFIG_$(PHASE_)FS_LOADER) += fs_loader.o
obj-$(CONFIG_GATEWORKS_SC) += gsc.o
obj-$(CONFIG_GDSYS_IOEP) += gdsys_ioep.o
obj-$(CONFIG_GDSYS_RXAUI_CTRL) += gdsys_rxaui_ctrl.o
obj-$(CONFIG_GDSYS_SOC) += gdsys_soc.o
obj-$(CONFIG_IRQ) += irq-uclass.o
obj-$(CONFIG_SANDBOX) += irq_sandbox.o irq_sandbox_test.o
-obj-$(CONFIG_$(XPL_)I2C_EEPROM) += i2c_eeprom.o
+obj-$(CONFIG_$(PHASE_)I2C_EEPROM) += i2c_eeprom.o
obj-$(CONFIG_IHS_FPGA) += ihs_fpga.o
obj-$(CONFIG_IMX8) += imx8/
obj-$(CONFIG_IMX_ELE) += imx_ele/
obj-$(CONFIG_LED_STATUS_GPIO) += gpio_led.o
obj-$(CONFIG_MPC83XX_SERDES) += mpc83xx_serdes.o
obj-$(CONFIG_$(PHASE_)LS2_SFP) += ls2_sfp.o
-obj-$(CONFIG_$(XPL_)MXC_OCOTP) += mxc_ocotp.o
+obj-$(CONFIG_$(PHASE_)MXC_OCOTP) += mxc_ocotp.o
obj-$(CONFIG_MXS_OCOTP) += mxs_ocotp.o
obj-$(CONFIG_NPCM_OTP) += npcm_otp.o
obj-$(CONFIG_NPCM_HOST) += npcm_host_intf.o
obj-$(CONFIG_NUVOTON_NCT6102D) += nuvoton_nct6102d.o
obj-$(CONFIG_P2SB) += p2sb-uclass.o
obj-$(CONFIG_PCA9551_LED) += pca9551_led.o
-obj-$(CONFIG_$(XPL_)PWRSEQ) += pwrseq-uclass.o
+obj-$(CONFIG_$(PHASE_)PWRSEQ) += pwrseq-uclass.o
ifdef CONFIG_QFW
obj-y += qfw.o
obj-$(CONFIG_QFW_ACPI) += qfw_acpi.o
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
obj-y += mmc.o
-obj-$(CONFIG_$(XPL_)DM_MMC) += mmc-uclass.o
+obj-$(CONFIG_$(PHASE_)DM_MMC) += mmc-uclass.o
ifdef CONFIG_$(PHASE_)DM_MMC
obj-$(CONFIG_$(PHASE_)BOOTSTD) += mmc_bootdev.o
endif
obj-$(CONFIG_$(PHASE_)MMC_WRITE) += mmc_write.o
-obj-$(CONFIG_$(XPL_)MMC_PWRSEQ) += mmc-pwrseq.o
+obj-$(CONFIG_$(PHASE_)MMC_PWRSEQ) += mmc-pwrseq.o
obj-$(CONFIG_MMC_SDHCI_ADMA_HELPERS) += sdhci-adma.o
-ifndef CONFIG_$(XPL_)BLK
+ifndef CONFIG_$(PHASE_)BLK
obj-y += mmc_legacy.o
endif
# Jean-Jacques Hiblot <jjhiblot@ti.com>
obj-$(CONFIG_MULTIPLEXER) += mux-uclass.o
-obj-$(CONFIG_$(XPL_)MUX_MMIO) += mmio.o
+obj-$(CONFIG_$(PHASE_)MUX_MMIO) += mmio.o
obj-y += nvme-uclass.o nvme.o nvme_show.o
obj-$(CONFIG_NVME_APPLE) += nvme_apple.o
-obj-$(CONFIG_$(XPL_)NVME_PCI) += nvme_pci.o
+obj-$(CONFIG_$(PHASE_)NVME_PCI) += nvme_pci.o
obj-y += rockchip/
obj-y += socionext/
-obj-$(CONFIG_$(XPL_)PHY) += phy-uclass.o
-obj-$(CONFIG_$(XPL_)NOP_PHY) += nop-phy.o
+obj-$(CONFIG_$(PHASE_)PHY) += phy-uclass.o
+obj-$(CONFIG_$(PHASE_)NOP_PHY) += nop-phy.o
obj-$(CONFIG_MIPI_DPHY_HELPERS) += phy-core-mipi-dphy.o
obj-$(CONFIG_AB8500_USB_PHY) += phy-ab8500-usb.o
obj-$(CONFIG_APPLE_ATCPHY) += phy-apple-atc.o
obj-$(CONFIG_BCM6368_USBH_PHY) += bcm6368-usbh-phy.o
obj-$(CONFIG_BCM_SR_PCIE_PHY) += phy-bcm-sr-pcie.o
obj-$(CONFIG_PHY_SANDBOX) += sandbox-phy.o
-obj-$(CONFIG_$(XPL_)PIPE3_PHY) += ti-pipe3-phy.o
+obj-$(CONFIG_$(PHASE_)PIPE3_PHY) += ti-pipe3-phy.o
obj-$(CONFIG_AM654_PHY) += phy-ti-am654.o
obj-$(CONFIG_STI_USB_PHY) += sti_usb_phy.o
obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
-obj-$(CONFIG_$(XPL_)PHY_CADENCE_SIERRA) += phy-cadence-sierra.o
-obj-$(CONFIG_$(XPL_)PHY_CADENCE_TORRENT) += phy-cadence-torrent.o
+obj-$(CONFIG_$(PHASE_)PHY_CADENCE_SIERRA) += phy-cadence-sierra.o
+obj-$(CONFIG_$(PHASE_)PHY_CADENCE_TORRENT) += phy-cadence-torrent.o
-obj-$(CONFIG_$(XPL_)PHY_J721E_WIZ) += phy-j721e-wiz.o
+obj-$(CONFIG_$(PHASE_)PHY_J721E_WIZ) += phy-j721e-wiz.o
# SPDX-License-Identifier: GPL-2.0+
obj-y += pinctrl-uclass.o
-obj-$(CONFIG_$(XPL_)PINCTRL_GENERIC) += pinctrl-generic.o
+obj-$(CONFIG_$(PHASE_)PINCTRL_GENERIC) += pinctrl-generic.o
obj-$(CONFIG_PINCTRL_ADI) += pinctrl-adi-adsp.o
obj-$(CONFIG_PINCTRL_APPLE) += pinctrl-apple.o
obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
obj-$(CONFIG_PINCTRL_AT91PIO4) += pinctrl-at91-pio4.o
obj-y += nxp/
-obj-$(CONFIG_$(XPL_)PINCTRL_ROCKCHIP) += rockchip/
+obj-$(CONFIG_$(PHASE_)PINCTRL_ROCKCHIP) += rockchip/
obj-$(CONFIG_ARCH_ASPEED) += aspeed/
obj-$(CONFIG_ARCH_ATH79) += ath79/
obj-$(CONFIG_PINCTRL_INTEL) += intel/
obj-$(CONFIG_ARCH_RENESAS) += renesas/
obj-$(CONFIG_PINCTRL_SANDBOX) += pinctrl-sandbox.o
obj-$(CONFIG_PINCTRL_SUNXI) += sunxi/
-obj-$(CONFIG_$(XPL_)PINCTRL_TEGRA) += tegra/
+obj-$(CONFIG_$(PHASE_)PINCTRL_TEGRA) += tegra/
obj-$(CONFIG_PINCTRL_UNIPHIER) += uniphier/
obj-$(CONFIG_PINCTRL_PIC32) += pinctrl_pic32.o
obj-$(CONFIG_PINCTRL_EXYNOS) += exynos/
obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
obj-$(CONFIG_PINCTRL_STI) += pinctrl-sti.o
obj-$(CONFIG_PINCTRL_STM32) += pinctrl_stm32.o
-obj-$(CONFIG_$(XPL_)PINCTRL_STMFX) += pinctrl-stmfx.o
+obj-$(CONFIG_$(PHASE_)PINCTRL_STMFX) += pinctrl-stmfx.o
obj-y += broadcom/
obj-$(CONFIG_PINCTRL_ZYNQMP) += pinctrl-zynqmp.o
obj-$(CONFIG_PINCTRL_STARFIVE) += starfive/
# Copyright (c) 2016, NVIDIA CORPORATION.
#
-obj-$(CONFIG_$(XPL_)POWER_DOMAIN) += power-domain-uclass.o
+obj-$(CONFIG_$(PHASE_)POWER_DOMAIN) += power-domain-uclass.o
obj-$(CONFIG_APPLE_PMGR_POWER_DOMAIN) += apple-pmgr.o
obj-$(CONFIG_BCM6328_POWER_DOMAIN) += bcm6328-power-domain.o
obj-$(CONFIG_IMX8_POWER_DOMAIN) += imx8-power-domain-legacy.o imx8-power-domain.o
# Lukasz Majewski <l.majewski@samsung.com>
obj-$(CONFIG_$(PHASE_)DM_PMIC) += pmic-uclass.o
-obj-$(CONFIG_$(XPL_)DM_PMIC_FAN53555) += fan53555.o
-obj-$(CONFIG_$(XPL_)DM_PMIC_DA9063) += da9063.o
-obj-$(CONFIG_$(XPL_)DM_PMIC_MAX77663) += max77663.o
+obj-$(CONFIG_$(PHASE_)DM_PMIC_FAN53555) += fan53555.o
+obj-$(CONFIG_$(PHASE_)DM_PMIC_DA9063) += da9063.o
+obj-$(CONFIG_$(PHASE_)DM_PMIC_MAX77663) += max77663.o
obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o
obj-$(CONFIG_DM_PMIC_MAX8998) += max8998.o
obj-$(CONFIG_DM_PMIC_MC34708) += mc34708.o
-obj-$(CONFIG_$(XPL_)DM_PMIC_BD71837) += bd71837.o
-obj-$(CONFIG_$(XPL_)DM_PMIC_MP5416) += mp5416.o
-obj-$(CONFIG_$(XPL_)DM_PMIC_PFUZE100) += pfuze100.o
-obj-$(CONFIG_$(XPL_)DM_PMIC_PCA9450) += pca9450.o
+obj-$(CONFIG_$(PHASE_)DM_PMIC_BD71837) += bd71837.o
+obj-$(CONFIG_$(PHASE_)DM_PMIC_MP5416) += mp5416.o
+obj-$(CONFIG_$(PHASE_)DM_PMIC_PFUZE100) += pfuze100.o
+obj-$(CONFIG_$(PHASE_)DM_PMIC_PCA9450) += pca9450.o
obj-$(CONFIG_PMIC_S2MPS11) += s2mps11.o
obj-$(CONFIG_DM_PMIC_SANDBOX) += sandbox.o i2c_pmic_emul.o
obj-$(CONFIG_PMIC_AB8500) += ab8500.o
obj-$(CONFIG_PMIC_ACT8846) += act8846.o
obj-$(CONFIG_PMIC_AS3722) += as3722.o as3722_gpio.o
-obj-$(CONFIG_$(XPL_)PMIC_AXP) += axp.o
+obj-$(CONFIG_$(PHASE_)PMIC_AXP) += axp.o
obj-$(CONFIG_PMIC_MAX8997) += max8997.o
obj-$(CONFIG_PMIC_QCOM) += pmic_qcom.o
obj-$(CONFIG_$(PHASE_)PMIC_RK8XX) += rk8xx.o
-obj-$(CONFIG_$(XPL_)PMIC_RN5T567) += rn5t567.o
+obj-$(CONFIG_$(PHASE_)PMIC_RN5T567) += rn5t567.o
obj-$(CONFIG_PMIC_TPS65090) += tps65090.o
obj-$(CONFIG_PMIC_S5M8767) += s5m8767.o
obj-$(CONFIG_DM_PMIC_TPS65910) += pmic_tps65910_dm.o
-obj-$(CONFIG_$(XPL_)DM_PMIC_TPS80031) += tps80031.o
-obj-$(CONFIG_$(XPL_)PMIC_PALMAS) += palmas.o
-obj-$(CONFIG_$(XPL_)PMIC_LP873X) += lp873x.o
-obj-$(CONFIG_$(XPL_)PMIC_LP87565) += lp87565.o
+obj-$(CONFIG_$(PHASE_)DM_PMIC_TPS80031) += tps80031.o
+obj-$(CONFIG_$(PHASE_)PMIC_PALMAS) += palmas.o
+obj-$(CONFIG_$(PHASE_)PMIC_LP873X) += lp873x.o
+obj-$(CONFIG_$(PHASE_)PMIC_LP87565) += lp87565.o
obj-$(CONFIG_PMIC_STPMIC1) += stpmic1.o
obj-$(CONFIG_PMIC_TPS65217) += pmic_tps65217.o
obj-$(CONFIG_PMIC_TPS65219) += tps65219.o
obj-$(CONFIG_PMIC_RAA215300) += raa215300.o
obj-$(CONFIG_POWER_TPS65218) += pmic_tps65218.o
-ifeq ($(CONFIG_$(XPL_)POWER_LEGACY),y)
+ifeq ($(CONFIG_$(PHASE_)POWER_LEGACY),y)
obj-$(CONFIG_POWER_LTC3676) += pmic_ltc3676.o
obj-$(CONFIG_POWER_PCA9450) += pmic_pca9450.o
obj-$(CONFIG_POWER_PFUZE100) += pmic_pfuze100.o
obj-$(CONFIG_POWER_MC34VR500) += pmic_mc34vr500.o
endif
-obj-$(CONFIG_$(XPL_)POWER_TPS62362) += pmic_tps62362.o
+obj-$(CONFIG_$(PHASE_)POWER_TPS62362) += pmic_tps62362.o
obj-$(CONFIG_SPL_POWER_TPS65910) += pmic_tps65910.o
# Przemyslaw Marczak <p.marczak@samsung.com>
#
-obj-$(CONFIG_$(XPL_)DM_REGULATOR) += regulator-uclass.o
+obj-$(CONFIG_$(PHASE_)DM_REGULATOR) += regulator-uclass.o
obj-$(CONFIG_REGULATOR_ACT8846) += act8846.o
obj-$(CONFIG_REGULATOR_AS3722) += as3722_regulator.o
-obj-$(CONFIG_$(XPL_)REGULATOR_AXP) += axp_regulator.o
-obj-$(CONFIG_$(XPL_)REGULATOR_AXP_USB_POWER) += axp_usb_power.o
-obj-$(CONFIG_$(XPL_)DM_REGULATOR_DA9063) += da9063.o
-obj-$(CONFIG_$(XPL_)DM_REGULATOR_MAX77663) += max77663_regulator.o
+obj-$(CONFIG_$(PHASE_)REGULATOR_AXP) += axp_regulator.o
+obj-$(CONFIG_$(PHASE_)REGULATOR_AXP_USB_POWER) += axp_usb_power.o
+obj-$(CONFIG_$(PHASE_)DM_REGULATOR_DA9063) += da9063.o
+obj-$(CONFIG_$(PHASE_)DM_REGULATOR_MAX77663) += max77663_regulator.o
obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o
obj-$(CONFIG_DM_REGULATOR_NPCM8XX) += npcm8xx_regulator.o
-obj-$(CONFIG_$(XPL_)DM_PMIC_PFUZE100) += pfuze100.o
-obj-$(CONFIG_$(XPL_)DM_REGULATOR_BD71837) += bd71837.o
-obj-$(CONFIG_$(XPL_)DM_REGULATOR_PCA9450) += pca9450.o
-obj-$(CONFIG_$(XPL_)REGULATOR_PWM) += pwm_regulator.o
-obj-$(CONFIG_$(XPL_)DM_REGULATOR_FAN53555) += fan53555.o
-obj-$(CONFIG_$(XPL_)DM_REGULATOR_COMMON) += regulator_common.o
-obj-$(CONFIG_$(XPL_)DM_REGULATOR_FIXED) += fixed.o
-obj-$(CONFIG_$(XPL_)DM_REGULATOR_GPIO) += gpio-regulator.o
+obj-$(CONFIG_$(PHASE_)DM_PMIC_PFUZE100) += pfuze100.o
+obj-$(CONFIG_$(PHASE_)DM_REGULATOR_BD71837) += bd71837.o
+obj-$(CONFIG_$(PHASE_)DM_REGULATOR_PCA9450) += pca9450.o
+obj-$(CONFIG_$(PHASE_)REGULATOR_PWM) += pwm_regulator.o
+obj-$(CONFIG_$(PHASE_)DM_REGULATOR_FAN53555) += fan53555.o
+obj-$(CONFIG_$(PHASE_)DM_REGULATOR_COMMON) += regulator_common.o
+obj-$(CONFIG_$(PHASE_)DM_REGULATOR_FIXED) += fixed.o
+obj-$(CONFIG_$(PHASE_)DM_REGULATOR_GPIO) += gpio-regulator.o
obj-$(CONFIG_DM_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
obj-$(CONFIG_$(PHASE_)REGULATOR_RK8XX) += rk8xx.o
obj-$(CONFIG_DM_REGULATOR_S2MPS11) += s2mps11_regulator.o
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
obj-$(CONFIG_DM_REGULATOR_SANDBOX) += sandbox.o
obj-$(CONFIG_REGULATOR_TPS65090) += tps65090_regulator.o
-obj-$(CONFIG_$(XPL_)DM_REGULATOR_PALMAS) += palmas_regulator.o
-obj-$(CONFIG_$(XPL_)DM_REGULATOR_PBIAS) += pbias_regulator.o
-obj-$(CONFIG_$(XPL_)DM_REGULATOR_LP873X) += lp873x_regulator.o
-obj-$(CONFIG_$(XPL_)DM_REGULATOR_LP87565) += lp87565_regulator.o
-obj-$(CONFIG_$(XPL_)DM_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
+obj-$(CONFIG_$(PHASE_)DM_REGULATOR_PALMAS) += palmas_regulator.o
+obj-$(CONFIG_$(PHASE_)DM_REGULATOR_PBIAS) += pbias_regulator.o
+obj-$(CONFIG_$(PHASE_)DM_REGULATOR_LP873X) += lp873x_regulator.o
+obj-$(CONFIG_$(PHASE_)DM_REGULATOR_LP87565) += lp87565_regulator.o
+obj-$(CONFIG_$(PHASE_)DM_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
obj-$(CONFIG_DM_REGULATOR_TPS65910) += tps65910_regulator.o
-obj-$(CONFIG_$(XPL_)DM_REGULATOR_TPS65911) += tps65911_regulator.o
+obj-$(CONFIG_$(PHASE_)DM_REGULATOR_TPS65911) += tps65911_regulator.o
obj-$(CONFIG_DM_REGULATOR_TPS62360) += tps62360_regulator.o
-obj-$(CONFIG_$(XPL_)DM_REGULATOR_TPS6287X) += tps6287x_regulator.o
-obj-$(CONFIG_$(XPL_)DM_REGULATOR_TPS80031) += tps80031_regulator.o
-obj-$(CONFIG_$(XPL_)DM_REGULATOR_STPMIC1) += stpmic1.o
+obj-$(CONFIG_$(PHASE_)DM_REGULATOR_TPS6287X) += tps6287x_regulator.o
+obj-$(CONFIG_$(PHASE_)DM_REGULATOR_TPS80031) += tps80031_regulator.o
+obj-$(CONFIG_$(PHASE_)DM_REGULATOR_STPMIC1) += stpmic1.o
obj-$(CONFIG_DM_REGULATOR_TPS65941) += tps65941_regulator.o
obj-$(CONFIG_DM_REGULATOR_SCMI) += scmi_regulator.o
-obj-$(CONFIG_$(XPL_)DM_REGULATOR_ANATOP) += anatop_regulator.o
+obj-$(CONFIG_$(PHASE_)DM_REGULATOR_ANATOP) += anatop_regulator.o
obj-$(CONFIG_DM_REGULATOR_TPS65219) += tps65219_regulator.o
obj-$(CONFIG_REGULATOR_RZG2L_USBPHY) += rzg2l-usbphy-regulator.o
# Texas Instruments Incorporated - https://www.ti.com/
#
-obj-$(CONFIG_$(XPL_)REMOTEPROC) += rproc-uclass.o rproc-elf-loader.o
+obj-$(CONFIG_$(PHASE_)REMOTEPROC) += rproc-uclass.o rproc-elf-loader.o
# Remote proc drivers - Please keep this list alphabetically sorted.
obj-$(CONFIG_K3_SYSTEM_CONTROLLER) += k3_system_controller.o
obj-$(CONFIG_PL01X_SERIAL) += serial_pl01x.o
obj-$(CONFIG_PL011_SERIAL) += serial_pl01x.o
-obj-$(CONFIG_$(XPL_)SYS_NS16550_SERIAL) += serial_ns16550.o
+obj-$(CONFIG_$(PHASE_)SYS_NS16550_SERIAL) += serial_ns16550.o
obj-$(CONFIG_ALTERA_UART) += altera_uart.o
obj-$(CONFIG_ALTERA_JTAG_UART) += altera_jtag_uart.o
obj-y += timer-uclass.o
obj-$(CONFIG_ADI_SC5XX_TIMER) += adi_sc5xx_timer.o
obj-$(CONFIG_ALTERA_TIMER) += altera_timer.o
-obj-$(CONFIG_$(XPL_)ANDES_PLMT_TIMER) += andes_plmt_timer.o
+obj-$(CONFIG_$(PHASE_)ANDES_PLMT_TIMER) += andes_plmt_timer.o
obj-$(CONFIG_ARC_TIMER) += arc_timer.o
obj-$(CONFIG_ARM_TWD_TIMER) += arm_twd_timer.o
obj-$(CONFIG_AST_TIMER) += ast_timer.o
obj-$(CONFIG_AST_IBEX_TIMER) += ast_ibex_timer.o
obj-$(CONFIG_ATCPIT100_TIMER) += atcpit100_timer.o
-obj-$(CONFIG_$(XPL_)ATMEL_PIT_TIMER) += atmel_pit_timer.o
-obj-$(CONFIG_$(XPL_)ATMEL_TCB_TIMER) += atmel_tcb_timer.o
+obj-$(CONFIG_$(PHASE_)ATMEL_PIT_TIMER) += atmel_pit_timer.o
+obj-$(CONFIG_$(PHASE_)ATMEL_TCB_TIMER) += atmel_tcb_timer.o
obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence-ttc.o
obj-$(CONFIG_DESIGNWARE_APB_TIMER) += dw-apb-timer.o
obj-$(CONFIG_FTTMR010_TIMER) += fttmr010_timer.o
obj-$(CONFIG_ROCKCHIP_TIMER) += rockchip_timer.o
obj-$(CONFIG_SANDBOX_TIMER) += sandbox_timer.o
obj-$(CONFIG_SP804_TIMER) += sp804_timer.o
-obj-$(CONFIG_$(XPL_)RISCV_ACLINT) += riscv_aclint_timer.o
+obj-$(CONFIG_$(PHASE_)RISCV_ACLINT) += riscv_aclint_timer.o
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
obj-$(CONFIG_STM32_TIMER) += stm32_timer.o
obj-$(CONFIG_TEGRA_TIMER) += tegra-timer.o
obj-$(CONFIG_USB_CDNS3) += cdns3.o
-cdns3-$(CONFIG_$(XPL_)USB_CDNS3_GADGET) += gadget.o ep0.o
+cdns3-$(CONFIG_$(PHASE_)USB_CDNS3_GADGET) += gadget.o ep0.o
-cdns3-$(CONFIG_$(XPL_)USB_CDNS3_HOST) += host.o
+cdns3-$(CONFIG_$(PHASE_)USB_CDNS3_HOST) += host.o
obj-$(CONFIG_USB_CDNS3_STARFIVE) += cdns3-starfive.o
obj-$(CONFIG_USB_CDNS3_TI) += cdns3-ti.o
# (C) Copyright 2016 Freescale Semiconductor, Inc.
#
-obj-$(CONFIG_$(XPL_)DM_USB) += common.o
+obj-$(CONFIG_$(PHASE_)DM_USB) += common.o
obj-$(CONFIG_USB_ISP1760) += usb_urb.o
obj-$(CONFIG_USB_MUSB_HOST) += usb_urb.o
obj-$(CONFIG_USB_MUSB_GADGET) += usb_urb.o
obj-$(CONFIG_USB_DWC3_GADGET) += gadget.o ep0.o
-obj-$(CONFIG_$(XPL_)USB_DWC3_AM62) += dwc3-am62.o
+obj-$(CONFIG_$(PHASE_)USB_DWC3_AM62) += dwc3-am62.o
obj-$(CONFIG_USB_DWC3_OMAP) += dwc3-omap.o
obj-$(CONFIG_USB_DWC3_MESON_G12A) += dwc3-meson-g12a.o
obj-$(CONFIG_USB_DWC3_MESON_GXL) += dwc3-meson-gxl.o
-obj-$(CONFIG_$(XPL_)USB_DWC3_GENERIC) += dwc3-generic.o
+obj-$(CONFIG_$(PHASE_)USB_DWC3_GENERIC) += dwc3-generic.o
obj-$(CONFIG_USB_DWC3_UNIPHIER) += dwc3-uniphier.o
obj-$(CONFIG_USB_DWC3_LAYERSCAPE) += dwc3-layerscape.o
obj-$(CONFIG_USB_DWC3_PHY_OMAP) += ti_usb_phy.o
#
# USB peripheral controller drivers
-ifndef CONFIG_$(XPL_)DM_USB_GADGET
+ifndef CONFIG_$(PHASE_)DM_USB_GADGET
obj-$(CONFIG_USB_DWC3_GADGET) += udc-core.o
endif
-obj-$(CONFIG_$(XPL_)DM_USB_GADGET) += udc-core.o
+obj-$(CONFIG_$(PHASE_)DM_USB_GADGET) += udc-core.o
obj-y += udc-uclass.o
# (C) Copyright 2000-2007
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-ifdef CONFIG_$(XPL_)DM_USB
+ifdef CONFIG_$(PHASE_)DM_USB
obj-y += usb-uclass.o
obj-$(CONFIG_SANDBOX) += usb-sandbox.o
endif
obj-${CONFIG_VIDEO_ROCKCHIP} += rockchip/
obj-${CONFIG_VIDEO_STM32} += stm32/
obj-${CONFIG_VIDEO_TEGRA124} += tegra124/
-obj-${CONFIG_$(XPL_)VIDEO_TIDSS} += tidss/
+obj-${CONFIG_$(PHASE_)VIDEO_TIDSS} += tidss/
obj-y += ti/
obj-$(CONFIG_ATMEL_HLCD) += atmel_hlcdfb.o
# Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
-obj-${CONFIG_$(XPL_)VIDEO_TIDSS} = tidss_drv.o
+obj-${CONFIG_$(PHASE_)VIDEO_TIDSS} = tidss_drv.o
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_$(XPL_)FS_FAT) = fat.o
-obj-$(CONFIG_$(XPL_)FAT_WRITE) = fat_write.o
+obj-$(CONFIG_$(PHASE_)FS_FAT) = fat.o
+obj-$(CONFIG_$(PHASE_)FAT_WRITE) = fat_write.o
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_$(XPL_)FS_SQUASHFS) = sqfs.o \
+obj-$(CONFIG_$(PHASE_)FS_SQUASHFS) = sqfs.o \
sqfs_inode.o \
sqfs_dir.o \
sqfs_decompressor.o
obj-$(CONFIG_$(PHASE_)ACPI) += acpi/
obj-$(CONFIG_ECDSA) += ecdsa/
-obj-$(CONFIG_$(XPL_)RSA) += rsa/
+obj-$(CONFIG_$(PHASE_)RSA) += rsa/
obj-$(CONFIG_HASH) += hash-checksum.o
obj-$(CONFIG_BLAKE2) += blake2/blake2b.o
obj-$(CONFIG_$(PHASE_)SHA512_LEGACY) += sha512.o
obj-$(CONFIG_CRYPT_PW) += crypt/
-obj-$(CONFIG_$(XPL_)ASN1_DECODER_LEGACY) += asn1_decoder.o
+obj-$(CONFIG_$(PHASE_)ASN1_DECODER_LEGACY) += asn1_decoder.o
obj-$(CONFIG_$(PHASE_)ZLIB) += zlib/
obj-$(CONFIG_$(PHASE_)ZSTD) += zstd/
obj-$(CONFIG_$(PHASE_)LZMA) += lzma/
obj-$(CONFIG_$(PHASE_)LZ4) += lz4_wrapper.o
-obj-$(CONFIG_$(XPL_)LIB_RATIONAL) += rational.o
+obj-$(CONFIG_$(PHASE_)LIB_RATIONAL) += rational.o
obj-$(CONFIG_LIBAVB) += libavb/
obj-$(CONFIG_$(PHASE_)OF_LIBFDT) += libfdt/
obj-$(CONFIG_$(PHASE_)OF_REAL) += fdtdec_common.o fdtdec.o
-obj-$(CONFIG_$(XPL_)MBEDTLS_LIB) += mbedtls/
+obj-$(CONFIG_$(PHASE_)MBEDTLS_LIB) += mbedtls/
obj-$(CONFIG_NET_LWIP) += lwip/
obj-y += vsprintf.o strto.o
obj-$(CONFIG_SSCANF) += sscanf.o
endif
-obj-$(CONFIG_$(XPL_)OID_REGISTRY) += oid_registry.o
+obj-$(CONFIG_$(PHASE_)OID_REGISTRY) += oid_registry.o
obj-y += abuf.o
obj-y += alist.o
ifdef CONFIG_$(PHASE_)GENERATE_ACPI_TABLE
-obj-$(CONFIG_$(XPL_)ACPIGEN) += acpigen.o
-obj-$(CONFIG_$(XPL_)ACPIGEN) += acpi_device.o
-obj-$(CONFIG_$(XPL_)ACPIGEN) += acpi_dp.o
-obj-$(CONFIG_$(XPL_)ACPIGEN) += acpi_table.o
+obj-$(CONFIG_$(PHASE_)ACPIGEN) += acpigen.o
+obj-$(CONFIG_$(PHASE_)ACPIGEN) += acpi_device.o
+obj-$(CONFIG_$(PHASE_)ACPIGEN) += acpi_dp.o
+obj-$(CONFIG_$(PHASE_)ACPIGEN) += acpi_table.o
obj-y += acpi_writer.o
# With QEMU the ACPI tables come from there, not from U-Boot
#
# Copyright (c) 2019, Softathome
-obj-$(CONFIG_$(XPL_)FIT_CIPHER) += aes-decrypt.o
+obj-$(CONFIG_$(PHASE_)FIT_CIPHER) += aes-decrypt.o
# Makefile for asymmetric cryptographic keys
#
-obj-$(CONFIG_$(XPL_)ASYMMETRIC_KEY_TYPE) += asymmetric_keys.o
+obj-$(CONFIG_$(PHASE_)ASYMMETRIC_KEY_TYPE) += asymmetric_keys.o
asymmetric_keys-y := asymmetric_type.o
-obj-$(CONFIG_$(XPL_)ASYMMETRIC_PUBLIC_KEY_SUBTYPE) += public_key_helper.o
-obj-$(CONFIG_$(XPL_)ASYMMETRIC_PUBLIC_KEY_LEGACY) += public_key.o
+obj-$(CONFIG_$(PHASE_)ASYMMETRIC_PUBLIC_KEY_SUBTYPE) += public_key_helper.o
+obj-$(CONFIG_$(PHASE_)ASYMMETRIC_PUBLIC_KEY_LEGACY) += public_key.o
#
# RSA public key parser
#
-obj-$(CONFIG_$(XPL_)RSA_PUBLIC_KEY_PARSER_LEGACY) += rsa_public_key.o
+obj-$(CONFIG_$(PHASE_)RSA_PUBLIC_KEY_PARSER_LEGACY) += rsa_public_key.o
rsa_public_key-y := \
rsapubkey.asn1.o \
rsa_helper.o
#
# X.509 Certificate handling
#
-obj-$(CONFIG_$(XPL_)X509_CERTIFICATE_PARSER) += x509_key_parser.o
+obj-$(CONFIG_$(PHASE_)X509_CERTIFICATE_PARSER) += x509_key_parser.o
x509_key_parser-y := x509_helper.o
-x509_key_parser-$(CONFIG_$(XPL_)X509_CERTIFICATE_PARSER_LEGACY) += \
+x509_key_parser-$(CONFIG_$(PHASE_)X509_CERTIFICATE_PARSER_LEGACY) += \
x509.asn1.o \
x509_akid.asn1.o \
x509_cert_parser.o \
#
# PKCS#7 message handling
#
-obj-$(CONFIG_$(XPL_)PKCS7_MESSAGE_PARSER) += pkcs7_message.o
+obj-$(CONFIG_$(PHASE_)PKCS7_MESSAGE_PARSER) += pkcs7_message.o
pkcs7_message-y := pkcs7_helper.o
-pkcs7_message-$(CONFIG_$(SPL_)PKCS7_MESSAGE_PARSER_LEGACY) += \
+pkcs7_message-$(CONFIG_$(PHASE_)PKCS7_MESSAGE_PARSER_LEGACY) += \
pkcs7.asn1.o \
pkcs7_parser.o
$(obj)/pkcs7_parser.o: $(obj)/pkcs7.asn1.h
$(obj)/pkcs7.asn1.o: $(obj)/pkcs7.asn1.c $(obj)/pkcs7.asn1.h
-obj-$(CONFIG_$(XPL_)PKCS7_VERIFY) += pkcs7_verify.o
+obj-$(CONFIG_$(PHASE_)PKCS7_VERIFY) += pkcs7_verify.o
#
# Signed PE binary-wrapped key handling
#
-obj-$(CONFIG_$(XPL_)MSCODE_PARSER_LEGACY) += mscode.o
+obj-$(CONFIG_$(PHASE_)MSCODE_PARSER_LEGACY) += mscode.o
mscode-y := \
mscode_parser.o \
-obj-$(CONFIG_$(XPL_)ECDSA_VERIFY) += ecdsa-verify.o
+obj-$(CONFIG_$(PHASE_)ECDSA_VERIFY) += ecdsa-verify.o
lwip/src/core/udp.o \
lwip/src/netif/ethernet.o
-obj-$(CONFIG_$(XPL_)MBEDTLS_LIB_TLS) += lwip/src/apps/altcp_tls/altcp_tls_mbedtls.o \
+obj-$(CONFIG_$(PHASE_)MBEDTLS_LIB_TLS) += lwip/src/apps/altcp_tls/altcp_tls_mbedtls.o \
lwip/src/apps/altcp_tls/altcp_tls_mbedtls_mem.o
MBEDTLS_LIB_DIR = external/mbedtls/library
# shim layer for hash
-obj-$(CONFIG_$(XPL_)MD5_MBEDTLS) += md5.o
-obj-$(CONFIG_$(XPL_)SHA1_MBEDTLS) += sha1.o
-obj-$(CONFIG_$(XPL_)SHA256_MBEDTLS) += sha256.o
-obj-$(CONFIG_$(XPL_)SHA512_MBEDTLS) += sha512.o
+obj-$(CONFIG_$(PHASE_)MD5_MBEDTLS) += md5.o
+obj-$(CONFIG_$(PHASE_)SHA1_MBEDTLS) += sha1.o
+obj-$(CONFIG_$(PHASE_)SHA256_MBEDTLS) += sha256.o
+obj-$(CONFIG_$(PHASE_)SHA512_MBEDTLS) += sha512.o
# x509 libraries
-obj-$(CONFIG_$(XPL_)ASYMMETRIC_PUBLIC_KEY_MBEDTLS) += \
+obj-$(CONFIG_$(PHASE_)ASYMMETRIC_PUBLIC_KEY_MBEDTLS) += \
public_key.o
-obj-$(CONFIG_$(XPL_)X509_CERTIFICATE_PARSER_MBEDTLS) += \
+obj-$(CONFIG_$(PHASE_)X509_CERTIFICATE_PARSER_MBEDTLS) += \
x509_cert_parser.o
-obj-$(CONFIG_$(XPL_)PKCS7_MESSAGE_PARSER_MBEDTLS) += pkcs7_parser.o
-obj-$(CONFIG_$(XPL_)MSCODE_PARSER_MBEDTLS) += mscode_parser.o
-obj-$(CONFIG_$(XPL_)RSA_PUBLIC_KEY_PARSER_MBEDTLS) += rsa_helper.o
+obj-$(CONFIG_$(PHASE_)PKCS7_MESSAGE_PARSER_MBEDTLS) += pkcs7_parser.o
+obj-$(CONFIG_$(PHASE_)MSCODE_PARSER_MBEDTLS) += mscode_parser.o
+obj-$(CONFIG_$(PHASE_)RSA_PUBLIC_KEY_PARSER_MBEDTLS) += rsa_helper.o
# MbedTLS crypto library
obj-$(CONFIG_$(XPL_)MBEDTLS_LIB) += mbedtls_lib_crypto.o
$(MBEDTLS_LIB_DIR)/constant_time.o \
$(MBEDTLS_LIB_DIR)/md.o
-mbedtls_lib_crypto-$(CONFIG_$(XPL_)MD5_MBEDTLS) += $(MBEDTLS_LIB_DIR)/md5.o
-mbedtls_lib_crypto-$(CONFIG_$(XPL_)SHA1_MBEDTLS) += $(MBEDTLS_LIB_DIR)/sha1.o
-mbedtls_lib_crypto-$(CONFIG_$(XPL_)SHA256_MBEDTLS) += \
+mbedtls_lib_crypto-$(CONFIG_$(PHASE_)MD5_MBEDTLS) += $(MBEDTLS_LIB_DIR)/md5.o
+mbedtls_lib_crypto-$(CONFIG_$(PHASE_)SHA1_MBEDTLS) += $(MBEDTLS_LIB_DIR)/sha1.o
+mbedtls_lib_crypto-$(CONFIG_$(PHASE_)SHA256_MBEDTLS) += \
$(MBEDTLS_LIB_DIR)/sha256.o
-mbedtls_lib_crypto-$(CONFIG_$(XPL_)SHA512_MBEDTLS) += \
+mbedtls_lib_crypto-$(CONFIG_$(PHASE_)SHA512_MBEDTLS) += \
$(MBEDTLS_LIB_DIR)/sha512.o
-mbedtls_lib_crypto-$(CONFIG_$(XPL_)HKDF_MBEDTLS) += \
+mbedtls_lib_crypto-$(CONFIG_$(PHASE_)HKDF_MBEDTLS) += \
$(MBEDTLS_LIB_DIR)/hkdf.o
# MbedTLS X509 library
obj-$(CONFIG_$(XPL_)MBEDTLS_LIB_X509) += mbedtls_lib_x509.o
mbedtls_lib_x509-y := $(MBEDTLS_LIB_DIR)/x509.o
-mbedtls_lib_x509-$(CONFIG_$(XPL_)ASN1_DECODER_MBEDTLS) += \
+mbedtls_lib_x509-$(CONFIG_$(PHASE_)ASN1_DECODER_MBEDTLS) += \
$(MBEDTLS_LIB_DIR)/asn1parse.o \
$(MBEDTLS_LIB_DIR)/asn1write.o \
$(MBEDTLS_LIB_DIR)/oid.o
-mbedtls_lib_x509-$(CONFIG_$(XPL_)RSA_PUBLIC_KEY_PARSER_MBEDTLS) += \
+mbedtls_lib_x509-$(CONFIG_$(PHASE_)RSA_PUBLIC_KEY_PARSER_MBEDTLS) += \
$(MBEDTLS_LIB_DIR)/bignum.o \
$(MBEDTLS_LIB_DIR)/bignum_core.o \
$(MBEDTLS_LIB_DIR)/rsa.o \
$(MBEDTLS_LIB_DIR)/rsa_alt_helpers.o
-mbedtls_lib_x509-$(CONFIG_$(XPL_)ASYMMETRIC_PUBLIC_KEY_MBEDTLS) += \
+mbedtls_lib_x509-$(CONFIG_$(PHASE_)ASYMMETRIC_PUBLIC_KEY_MBEDTLS) += \
$(MBEDTLS_LIB_DIR)/pk.o \
$(MBEDTLS_LIB_DIR)/pk_wrap.o \
$(MBEDTLS_LIB_DIR)/pkparse.o
-mbedtls_lib_x509-$(CONFIG_$(XPL_)X509_CERTIFICATE_PARSER_MBEDTLS) += \
+mbedtls_lib_x509-$(CONFIG_$(PHASE_)X509_CERTIFICATE_PARSER_MBEDTLS) += \
$(MBEDTLS_LIB_DIR)/x509_crl.o \
$(MBEDTLS_LIB_DIR)/x509_crt.o
-mbedtls_lib_x509-$(CONFIG_$(XPL_)PKCS7_MESSAGE_PARSER_MBEDTLS) += \
+mbedtls_lib_x509-$(CONFIG_$(PHASE_)PKCS7_MESSAGE_PARSER_MBEDTLS) += \
$(MBEDTLS_LIB_DIR)/pkcs7.o
#mbedTLS TLS support
obj-$(CONFIG_DM_DSA) += dsa-uclass.o
obj-$(CONFIG_CMD_LINK_LOCAL) += link_local.o
obj-$(CONFIG_IPV6) += ndisc.o
-obj-$(CONFIG_$(XPL_)DM_ETH) += net.o
+obj-$(CONFIG_$(PHASE_)DM_ETH) += net.o
obj-$(CONFIG_IPV6) += net6.o
obj-$(CONFIG_CMD_NFS) += nfs.o
obj-$(CONFIG_CMD_PING) += ping.o
endif
ifeq ($(filter y,$(CONFIG_NET) $(CONFIG_NET_LWIP)),y)
-obj-$(CONFIG_$(XPL_)DM_ETH) += eth-uclass.o
+obj-$(CONFIG_$(PHASE_)DM_ETH) += eth-uclass.o
obj-$(CONFIG_$(PHASE_)BOOTDEV_ETH) += eth_bootdev.o
obj-$(CONFIG_DM_MDIO) += mdio-uclass.o
obj-$(CONFIG_DM_MDIO_MUX) += mdio-mux-uclass.o
-obj-$(CONFIG_$(XPL_)DM_ETH) += eth_common.o
+obj-$(CONFIG_$(PHASE_)DM_ETH) += eth_common.o
obj-y += net-common.o
endif
ccflags-y += -I$(srctree)/lib/lwip/lwip/src/include -I$(srctree)/lib/lwip/u-boot
-obj-$(CONFIG_$(SPL_)DM_ETH) += net-lwip.o
+obj-$(CONFIG_$(PHASE_)DM_ETH) += net-lwip.o
obj-$(CONFIG_CMD_DHCP) += dhcp.o
obj-$(CONFIG_CMD_DNS) += dns.o
obj-$(CONFIG_CMD_PING) += ping.o
# do not delete intermediate files automatically
.SECONDARY:
-ifdef CONFIG_XPL_BUILD
-XPL_ := SPL_
+ifeq ($(CONFIG_SPL_BUILD),y)
+PHASE_ := SPL_
+else
ifeq ($(CONFIG_VPL_BUILD),y)
PHASE_ := VPL_
else
ifeq ($(CONFIG_TPL_BUILD),y)
PHASE_ := TPL_
else
-PHASE_ := SPL_
+PHASE_ :=
endif
endif
-else
-XPL_ :=
-PHASE_ :=
endif
export SPL_NAME
-ifdef CONFIG_XPL_BUILD
-XPL_ := SPL_
+ifeq ($(CONFIG_SPL_BUILD),y)
+PHASE_ := SPL_
+else
ifeq ($(CONFIG_VPL_BUILD),y)
PHASE_ := VPL_
else
ifeq ($(CONFIG_TPL_BUILD),y)
PHASE_ := TPL_
else
-PHASE_ := SPL_
+PHASE_ :=
endif
endif
-else
-XPL_ :=
-PHASE_ :=
endif
ifeq ($(obj)$(CONFIG_SUPPORT_SPL),spl)
obj-y += test-main.o
-obj-$(CONFIG_$(XPL_)CMDLINE) += cmd/
-obj-$(CONFIG_$(XPL_)CMDLINE) += cmd_ut.o
+obj-$(CONFIG_$(PHASE_)CMDLINE) += cmd/
+obj-$(CONFIG_$(PHASE_)CMDLINE) += cmd_ut.o
obj-y += dm/
obj-$(CONFIG_FUZZ) += fuzz/
ifndef CONFIG_SANDBOX_VPL
obj-$(CONFIG_UNIT_TEST) += lib/
endif
ifneq ($(CONFIG_HUSH_PARSER),)
-obj-$(CONFIG_$(XPL_)CMDLINE) += hush/
+obj-$(CONFIG_$(PHASE_)CMDLINE) += hush/
endif
obj-$(CONFIG_UT_OPTEE) += optee/
obj-y += ut.o
endif
ifdef CONFIG_SANDBOX
-obj-$(CONFIG_$(XPL_)CMDLINE) += bootm.o
+obj-$(CONFIG_$(PHASE_)CMDLINE) += bootm.o
endif
obj-$(CONFIG_MEASURED_BOOT) += measurement.o
# Copyright (c) 2013 Google, Inc
# Copyright 2022-2023 Arm Limited and/or its affiliates <open-source-office@arm.com>
-obj-$(CONFIG_$(XPL_)CMDLINE) += command.o
+obj-$(CONFIG_$(PHASE_)CMDLINE) += command.o
ifdef CONFIG_HUSH_PARSER
obj-$(CONFIG_CONSOLE_RECORD) += test_echo.o
endif
# SPDX-License-Identifier: GPL-2.0+
obj-$(CONFIG_AUTOBOOT) += test_autoboot.o
-ifneq ($(CONFIG_$(XPL_)BLOBLIST),)
+ifneq ($(CONFIG_$(PHASE_)BLOBLIST),)
ifdef CONFIG_BLOBLIST_FIXED
-obj-$(CONFIG_$(XPL_)CMDLINE) += bloblist.o
+obj-$(CONFIG_$(PHASE_)CMDLINE) += bloblist.o
endif
endif
obj-$(CONFIG_CYCLIC) += cyclic.o
obj-$(CONFIG_EVENT_DYNAMIC) += event.o
obj-y += cread.o
-obj-$(CONFIG_$(XPL_)CMDLINE) += print.o
+obj-$(CONFIG_$(PHASE_)CMDLINE) += print.o
# Written by Andrew Scull <ascull@google.com>
#
-obj-$(CONFIG_$(XPL_)CMDLINE) += cmd_fuzz.o
+obj-$(CONFIG_$(PHASE_)CMDLINE) += cmd_fuzz.o
obj-$(CONFIG_VIRTIO_SANDBOX) += virtio.o
# (C) Copyright 2018
# Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
-obj-$(CONFIG_$(XPL_)UT_COMPRESSION) += compression.o
+obj-$(CONFIG_$(PHASE_)UT_COMPRESSION) += compression.o
ifeq ($(CONFIG_XPL_BUILD),)
obj-y += abuf.o
obj-$(CONFIG_CRC8) += test_crc8.o
obj-$(CONFIG_UT_LIB_CRYPT) += test_crypt.o
obj-$(CONFIG_UT_TIME) += time.o
-obj-$(CONFIG_$(XPL_)UT_UNICODE) += unicode.o
+obj-$(CONFIG_$(PHASE_)UT_UNICODE) += unicode.o
obj-$(CONFIG_LIB_UUID) += uuid.o
else
obj-$(CONFIG_SANDBOX) += kconfig_spl.o
return oper + cfg
-RE_MK_CONFIGS = re.compile(r'CONFIG_(\$\(XPL_\)|\$\(PHASE_\))?([A-Za-z0-9_]*)')
+RE_MK_CONFIGS = re.compile(r'CONFIG_(\$\(PHASE_\))?([A-Za-z0-9_]*)')
RE_IFDEF = re.compile(r'(ifdef|ifndef)')
RE_C_CONFIGS = re.compile(r'CONFIG_([A-Za-z0-9_]*)')
RE_CONFIG_IS = re.compile(r'CONFIG_IS_ENABLED\(([A-Za-z0-9_]*)\)')
>>> RE_MK_CONFIGS.search('CONFIG_FRED').groups()
(None, 'FRED')
- >>> RE_MK_CONFIGS.search('CONFIG_$(XPL_)MARY').groups()
- ('$(XPL_)', 'MARY')
>>> RE_MK_CONFIGS.search('CONFIG_$(PHASE_)MARY').groups()
('$(PHASE_)', 'MARY')
"""
spl_mode (int): If MODE_SPL, look at source code which implies
an xPL_ option, but for which there is none;
for MOD_PROPER, look at source code which implies a Proper
- option (i.e. use of CONFIG_IS_ENABLED() or $(XPL_) or
- $(PHASE_) but for which there none;
+ option (i.e. use of CONFIG_IS_ENABLED() or $(PHASE_) but for
+ which there none;
if MODE_NORMAL, ignore SPL
Returns:
projects / thirdparty / u-boot.git / commitdiff
