};
+#define CONFIDENCE_RANGE 1000
+#define CONFIDENCE_CUTOFF 333
#ifdef Py_DEBUG
#define DPRINTF(level, ...) \
((uint32_t)((INSTR) - ((_Py_CODEUNIT *)(CODE)->co_code_adaptive)))
-/* Compute branch fitness penalty based on how likely the traced path is.
- * The penalty is small when the traced path is common, large when rare.
- * A branch that historically goes the other way gets a heavy penalty. */
-static inline int
-compute_branch_penalty(uint16_t history, bool branch_taken)
-{
- int taken_count = _Py_popcount32((uint32_t)history);
- int on_trace_count = branch_taken ? taken_count : 16 - taken_count;
- int off_trace = 16 - on_trace_count;
- /* Linear scaling: off_trace ranges from 0 (fully biased our way)
- * to 16 (fully biased against us), so the penalty ranges from
- * FITNESS_BRANCH_BASE to FITNESS_BRANCH_BASE + 32. */
- return FITNESS_BRANCH_BASE + off_trace * 2;
-}
-
-/* Compute exit quality for the current trace position.
- * Higher values mean better places to stop the trace. */
-static inline int32_t
-compute_exit_quality(_Py_CODEUNIT *target_instr, int opcode,
- const _PyJitTracerState *tracer)
-{
- if (target_instr == tracer->initial_state.start_instr ||
- target_instr == tracer->initial_state.close_loop_instr) {
- return EXIT_QUALITY_CLOSE_LOOP;
- }
- if (target_instr->op.code == ENTER_EXECUTOR) {
- return EXIT_QUALITY_ENTER_EXECUTOR;
- }
- if (_PyOpcode_Caches[_PyOpcode_Deopt[opcode]] > 0) {
- return EXIT_QUALITY_SPECIALIZABLE;
- }
- return EXIT_QUALITY_DEFAULT;
-}
-
-static inline int32_t
-compute_frame_penalty(const _PyOptimizationConfig *cfg)
-{
- return (int32_t)cfg->fitness_initial / 10 + 1;
-}
-
static int
is_terminator(const _PyUOpInstruction *uop)
{
_Py_CODEUNIT *this_instr = tracer->prev_state.instr;
_Py_CODEUNIT *target_instr = this_instr;
uint32_t target = 0;
- int end_trace_opcode = _DEOPT;
target = Py_IsNone((PyObject *)old_code)
? (uint32_t)(target_instr - _Py_INTERPRETER_TRAMPOLINE_INSTRUCTIONS_PTR)
DPRINTF(2, "Unsupported: oparg too large\n");
unsupported:
{
+ // Rewind to previous instruction and replace with _EXIT_TRACE.
_PyUOpInstruction *curr = uop_buffer_last(trace);
while (curr->opcode != _SET_IP && uop_buffer_length(trace) > 2) {
trace->next--;
curr = uop_buffer_last(trace);
}
+ assert(curr->opcode == _SET_IP || uop_buffer_length(trace) == 2);
if (curr->opcode == _SET_IP) {
int32_t old_target = (int32_t)uop_get_target(curr);
- curr->opcode = end_trace_opcode;
+ curr->opcode = _DEOPT;
curr->format = UOP_FORMAT_TARGET;
curr->target = old_target;
}
return 1;
}
- // Fitness-based trace quality check (before reserving space for this instruction)
- _PyJitTracerTranslatorState *ts = &tracer->translator_state;
- int32_t eq = compute_exit_quality(target_instr, opcode, tracer);
- DPRINTF(3, "Fitness check: %s(%d) fitness=%d, exit_quality=%d, depth=%d\n",
- _PyOpcode_OpName[opcode], oparg, ts->fitness, eq, ts->frame_depth);
-
- // Check if fitness is depleted — should we stop the trace?
- if (ts->fitness < eq) {
- // This is a tracer heuristic rather than normal program control flow,
- // so leave operand1 clear and let the resulting side exit increase chain_depth.
- ADD_TO_TRACE(_EXIT_TRACE, 0, 0, target);
- OPT_STAT_INC(fitness_terminated_traces);
- DPRINTF(2, "Fitness terminated: %s(%d) fitness=%d < exit_quality=%d\n",
- _PyOpcode_OpName[opcode], oparg, ts->fitness, eq);
- goto done;
- }
-
// One for possible _DEOPT, one because _CHECK_VALIDITY itself might _DEOPT
trace->end -= 2;
assert(jump_happened ? (next_instr == computed_jump_instr) : (next_instr == computed_next_instr));
uint32_t uopcode = BRANCH_TO_GUARD[opcode - POP_JUMP_IF_FALSE][jump_happened];
ADD_TO_TRACE(uopcode, 0, 0, INSTR_IP(jump_happened ? computed_next_instr : computed_jump_instr, old_code));
- int bp = compute_branch_penalty(target_instr[1].cache, jump_happened);
- tracer->translator_state.fitness -= bp;
- DPRINTF(3, " branch penalty: -%d (history=0x%04x, taken=%d) -> fitness=%d\n",
- bp, target_instr[1].cache, jump_happened,
- tracer->translator_state.fitness);
-
break;
}
case JUMP_BACKWARD_JIT:
case JUMP_BACKWARD_NO_JIT:
case JUMP_BACKWARD:
ADD_TO_TRACE(_CHECK_PERIODIC, 0, 0, target);
- tracer->translator_state.fitness -= FITNESS_BACKWARD_EDGE;
- DPRINTF(3, " backward edge penalty: -%d -> fitness=%d\n",
- FITNESS_BACKWARD_EDGE, tracer->translator_state.fitness);
_Py_FALLTHROUGH;
case JUMP_BACKWARD_NO_INTERRUPT:
{
assert(next->op.code == STORE_FAST);
operand = next->op.arg;
}
- else if (uop == _PUSH_FRAME) {
- _PyJitTracerTranslatorState *ts_depth = &tracer->translator_state;
- ts_depth->frame_depth++;
- if (ts_depth->frame_depth >= MAX_ABSTRACT_FRAME_DEPTH) {
- // The optimizer can't handle frames this deep,
- // so there's no point continuing the trace.
- DPRINTF(2, "Unsupported: frame depth %d >= MAX_ABSTRACT_FRAME_DEPTH\n",
- ts_depth->frame_depth);
- end_trace_opcode = _EXIT_TRACE;
- goto unsupported;
- }
- int32_t frame_penalty = compute_frame_penalty(&tstate->interp->opt_config);
- int32_t cost = frame_penalty * ts_depth->frame_depth;
- ts_depth->fitness -= cost;
- DPRINTF(3, " _PUSH_FRAME: depth=%d, penalty=-%d (per_frame=%d) -> fitness=%d\n",
- ts_depth->frame_depth, cost, frame_penalty,
- ts_depth->fitness);
- }
- else if (uop == _RETURN_VALUE || uop == _RETURN_GENERATOR || uop == _YIELD_VALUE) {
- _PyJitTracerTranslatorState *ts_depth = &tracer->translator_state;
- int32_t frame_penalty = compute_frame_penalty(&tstate->interp->opt_config);
- if (ts_depth->frame_depth <= 0) {
- // Underflow: returning from a frame we didn't enter
- ts_depth->fitness -= frame_penalty * 2;
- DPRINTF(3, " %s: underflow penalty=-%d -> fitness=%d\n",
- _PyOpcode_uop_name[uop], frame_penalty * 2,
- ts_depth->fitness);
- }
- else {
- // Reward returning: small inlined calls should be encouraged
- ts_depth->fitness += frame_penalty;
- DPRINTF(3, " %s: return reward=+%d, depth=%d -> fitness=%d\n",
- _PyOpcode_uop_name[uop], frame_penalty,
- ts_depth->frame_depth - 1,
- ts_depth->fitness);
- }
- ts_depth->frame_depth = ts_depth->frame_depth <= 0 ? 0 : ts_depth->frame_depth - 1;
- }
else if (_PyUop_Flags[uop] & HAS_RECORDS_VALUE_FLAG) {
PyObject *recorded_value = tracer->prev_state.recorded_value;
tracer->prev_state.recorded_value = NULL;
ADD_TO_TRACE(_JUMP_TO_TOP, 0, 0, 0);
goto done;
}
- // Update fitness AFTER translation, BEFORE returning to continue tracing.
- // This ensures the next iteration's fitness check reflects the cost of
- // all instructions translated so far.
- tracer->translator_state.fitness -= FITNESS_PER_INSTRUCTION;
- DPRINTF(3, " per-insn cost: -%d -> fitness=%d\n",
- FITNESS_PER_INSTRUCTION, tracer->translator_state.fitness);
- DPRINTF(2, "Trace continuing (fitness=%d)\n", tracer->translator_state.fitness);
+ DPRINTF(2, "Trace continuing\n");
return 1;
done:
DPRINTF(2, "Trace done\n");
assert(curr_instr->op.code == JUMP_BACKWARD_JIT || curr_instr->op.code == RESUME_CHECK_JIT || (exit != NULL));
tracer->initial_state.jump_backward_instr = curr_instr;
- // Initialize fitness tracking state
- const _PyOptimizationConfig *cfg = &tstate->interp->opt_config;
- _PyJitTracerTranslatorState *ts = &tracer->translator_state;
- bool is_side_trace = (exit != NULL);
- ts->fitness = is_side_trace
- ? (int32_t)cfg->fitness_initial_side
- : (int32_t)cfg->fitness_initial;
- ts->frame_depth = 0;
- DPRINTF(3, "Fitness init: %s trace, fitness=%d\n",
- is_side_trace ? "side" : "root", ts->fitness);
-
tracer->is_tracing = true;
return 1;
}
projects / thirdparty / Python / cpython.git / commitdiff
