--- /dev/null
+/dts-v1/;
+
+#include "ipq5018.dtsi"
+#include "ipq5018-ess.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "GL.iNet GL-B3000";
+ compatible ="glinet,gl-b3000", "qcom,ipq5018";
+
+ aliases {
+ ethernet1 = &dp2;
+ label-mac-device = &dp2;
+ led-boot = &led_system_blue;
+ led-failsafe = &led_status_white;
+ led-running = &led_status_white;
+ led-upgrade = &led_system_blue;
+ serial0 = &blsp1_uart1;
+ };
+
+ chosen {
+ bootargs-append = " root=/dev/ubiblock0_1 swiotlb=1 coherent_pool=2M";
+ stdout-path = "serial0:115200n8";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ button_reset {
+ label = "reset";
+ gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&leds_pins>;
+ pinctrl-names = "default";
+
+ led_system_blue: led_system_blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_POWER;
+ gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ led_status_white: led_status_white {
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_POWER;
+ gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ reserved-memory {
+
+ q6_mem_regions: q6_mem_regions@4b000000 {
+ no-map;
+ reg = <0x0 0x4b000000 0x0 0x3000000>;
+ };
+ };
+};
+
+&switch {
+ status = "okay";
+ switch_mac_mode = <MAC_MODE_SGMII_CHANNEL0>;
+
+ qcom,port_phyinfo {
+
+ // MAC0 -> GE Phy -> QCA8337 Phy2
+ port@0 {
+ port_id = <1>;
+ mdiobus = <&mdio0>;
+ phy_address = <7>;
+ };
+
+ // MAC1 ---SGMII---> QCA8337 SerDes
+ port@1 {
+ port_id = <2>;
+ forced-speed = <1000>;
+ forced-duplex = <1>;
+ };
+ };
+};
+
+// MAC1 ---SGMII---> QCA8337 SerDes
+&dp2 {
+ status = "okay";
+ nvmem-cells = <&macaddr_dp2>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+};
+
+&mdio1 {
+ status = "okay";
+ pinctrl-0 = <&mdio1_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
+
+ // QCA8337 Phy0 -> WAN
+ qca8337_0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ // QCA8337 Phy1 -> LAN1
+ qca8337_1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ // QCA8337 Phy3 -> LAN2
+ qca8337_2: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ // QCA8337 switch
+ switch0: ethernet-switch@17 {
+ compatible = "qca,qca8337";
+ reg = <17>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0cpu: port@0 {
+ reg = <0>;
+ label = "cpu";
+ phy-mode = "sgmii";
+ ethernet = <&dp2>;
+ qca,sgmii-enable-pll;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ // QCA8337 Phy0 -> WAN
+ port@1 {
+ reg = <1>;
+ label = "wan";
+ phy-handle = <&qca8337_0>;
+ };
+
+ // QCA8337 Phy1 -> LAN1
+ port@2 {
+ reg = <2>;
+ label = "lan1";
+ phy-handle = <&qca8337_1>;
+
+ nvmem-cells = <&macaddr_dp2 2>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ // QCA8337 Phy3 -> LAN2
+ port@3 {
+ reg = <3>;
+ label = "lan2";
+ phy-handle = <&qca8337_2>;
+
+ nvmem-cells = <&macaddr_dp2 2>;
+ nvmem-cell-names = "mac-address";
+ };
+ };
+ };
+};
+
+&sleep_clk {
+ clock-frequency = <32000>;
+};
+
+&xo_board_clk {
+ clock-frequency = <24000000>;
+};
+
+&blsp1_uart1 {
+ status = "okay";
+ pinctrl-0 = <&serial_0_pins>;
+ pinctrl-names = "default";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&prng {
+ status = "okay";
+};
+
+&qfprom {
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&qpic_nand {
+ pinctrl-0 = <&qpic_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ nand@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-engine = <&qpic_nand>;
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+
+ partitions {
+ compatible = "qcom,smem-part";
+
+ partition-0-art {
+ compatible = "fixed-partitions";
+ label = "0:ART";
+ read-only;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_dp2: macaddr@0 {
+ compatible = "mac-base";
+ #nvmem-cell-cells = <1>;
+ reg = <0x0 0x6>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&tlmm {
+ mdio1_pins: mdio-state {
+
+ mdc-pins {
+ pins = "gpio36";
+ function = "mdc";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ mdio-pins {
+ pins = "gpio37";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+
+ leds_pins: leds-pins {
+ pins = "gpio23", "gpio24";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+
+ button_pins: button-pins {
+ pins = "gpio27";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ qpic_pins: qpic-state {
+
+ clock-pins {
+ pins = "gpio9";
+ function = "qspi_clk";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ cs-pins {
+ pins = "gpio8";
+ function = "qspi_cs";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ data-pins {
+ pins = "gpio4", "gpio5", "gpio6", "gpio7";
+ function = "qspi_data";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ serial_0_pins: uart0-state {
+ pins =
+ "gpio20", // RX
+ "gpio21"; // TX
+ function = "blsp0_uart0";
+ drive-strength = <8>;
+ bias-disable;
+ };
+};
+
+&tsens {
+ status = "okay ";
+};
+
+&q6v5_wcss {
+ status = "okay";
+
+ memory-region = <&q6_mem_regions>;
+ firmware-name = "ath11k/IPQ5018/hw1.0/q6_fw.mdt",
+ "ath11k/IPQ5018/hw1.0/m3_fw.mdt",
+ "ath11k/QCN6122/hw1.0/m3_fw.mdt";
+
+ /* B3000 currently doesn't support passing bootargs */
+ /*boot-args = < */
+ /* type: 0x1 PCIE0 */
+ /* length: 4 */
+ /* PD id: 3 */
+ /* reset GPIO: 15 */
+ /* reserved: 0 0>; */
+
+ // IPQ5018
+ q6_wcss_pd1: pd-1 {
+ firmware-name = "ath11k/IPQ5018/hw1.0/q6_fw.mdt";
+
+ resets =
+ <&gcc GCC_WCSSAON_RESET>,
+ <&gcc GCC_WCSS_BCR>,
+ <&gcc GCC_CE_BCR>;
+ reset-names =
+ "wcss_aon_reset",
+ "wcss_reset",
+ "ce_reset";
+
+ clocks =
+ <&gcc GCC_WCSS_AHB_S_CLK>,
+ <&gcc GCC_WCSS_ACMT_CLK>,
+ <&gcc GCC_WCSS_AXI_M_CLK>;
+ clock-names =
+ "gcc_wcss_ahb_s_clk",
+ "gcc_wcss_acmt_clk",
+ "gcc_wcss_axi_m_clk";
+
+ // qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
+ interrupts-extended =
+ <&wcss_smp2p_in 8 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 9 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 12 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 11 IRQ_TYPE_NONE>;
+ interrupt-names =
+ "fatal",
+ "ready",
+ "spawn-ack",
+ "stop-ack";
+
+ qcom,smem-states =
+ <&wcss_smp2p_out 8>,
+ <&wcss_smp2p_out 9>,
+ <&wcss_smp2p_out 10>;
+ qcom,smem-state-names =
+ "shutdown",
+ "stop",
+ "spawn";
+ };
+
+ // QCN6102 5G
+ q6_wcss_pd3: pd-3 {
+ firmware-name = "ath11k/IPQ5018/hw1.0/q6_fw.mdt";
+
+ interrupts-extended =
+ <&wcss_smp2p_in 24 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 25 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 28 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 27 IRQ_TYPE_NONE>;
+ interrupt-names =
+ "fatal",
+ "ready",
+ "spawn-ack",
+ "stop-ack";
+
+ qcom,smem-states =
+ <&wcss_smp2p_out 24>,
+ <&wcss_smp2p_out 25>,
+ <&wcss_smp2p_out 26>;
+ qcom,smem-state-names =
+ "shutdown",
+ "stop",
+ "spawn";
+ };
+};
+
+&wifi0 {
+ // IPQ5018
+ status = "okay";
+
+ qcom,rproc = <&q6_wcss_pd1>;
+ qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+ qcom,ath11k-calibration-variant = "GL-iNet-GL-B3000";
+ qcom,ath11k-fw-memory-mode = <2>;
+ qcom,bdf-addr = <0x4c400000>;
+};
+
+&wifi1 {
+ // QCN6102 5G
+ status = "okay";
+
+ qcom,rproc = <&q6_wcss_pd3>;
+ qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
+ qcom,ath11k-calibration-variant = "GL-iNet-GL-B3000";
+ qcom,ath11k-fw-memory-mode = <2>;
+ qcom,bdf-addr = <0x4d100000>;
+ qcom,m3-dump-addr = <0x4df00000>;
+};
--- /dev/null
+. /lib/upgrade/common.sh
+
+glinet_do_fit_upgrade() {
+ echo -n "fit: Extract [ FIT IMAGE ] -x-x-> [ ubi.bin ] ... "
+ local ubi=/tmp/ubi.bin
+ local part=$(dumpimage -l "$1" | grep -o "Image [0-9] (ubi)" | cut -f2 -d" ")
+
+ local ubibin=$( dumpimage -T flat_dt -p ${part} -o "$ubi" "$1" )
+ if [ -s "$ubi" ]; then
+ echo "[ OK ]"
+ local ubiMd5=$(md5sum "$ubi" | cut -f1 -d" ")
+ echo -n "fit-copy: [ ubi.bin ] -c-c-> [ firmware.bin ] ... "
+ mv "$ubi" "$1"
+ echo "[ OK ]"
+ local firmMd5=$(md5sum "$1" | cut -f1 -d" ")
+ echo -n "fit-copy: MD5 CHECK: "
+ if [ "$ubiMd5" = "$firmMd5" ]; then
+ echo "[ OK ]"
+ echo "$ubiMd5 <=> $firmMd5"
+ echo "fit: Successfully Extracted UBI from FIT IMAGE"
+ echo "fit: Proceeding with sysupgrade .."
+ nand_do_upgrade "$1"
+ return
+ fi
+ echo "[ FAILED ] !!"
+ echo "ERROR: Failed to Copy UBI into firmware.bin !!"
+ echo "fit: Terminating sysupgrade .."
+ exit 1
+ fi
+ echo "[ FAILED ] !!"
+ echo "ERROR: Failed to Extract UBI from FIT IMAGE !!"
+ echo "fit: Terminating sysupgrade .."
+ exit 1
+}
+
+glinet_do_upgrade() {
+ CI_UBIPART="rootfs"
+ echo -n "Validating GL.iNet Image ... "
+ case "$(identify_magic_long $(get_magic_long "$1"))" in
+ fit)
+ echo "[ OK ]"
+ echo "fit-main: Firmware is Valid: fit"
+ echo "fit-main: Upgrading Firmware via [ FIT IMAGE ]"
+ glinet_do_fit_upgrade "$1"
+ ;;
+ *)
+ echo "[ FAILED ] !!"
+ echo "main: GL.iNet Image Validation Failed !!"
+ echo "main: Attempting default sysupgrade"
+ nand_do_upgrade "$1"
+ ;;
+ esac
+}
projects / thirdparty / openwrt.git / commitdiff
