In [0], Andrew noted a code quality issue in the implementation of
blk_find_first and blk_find_next. This led to the observation that the
logic of these functions was also likely incorrect, and based on a quick
check it seemed the functions were unused outside of test code, which
did not exercise the potential failure case, so we felt they should be
removed. In [1], a test patch which illustrates the failure in sandbox
is provided for reference.
Because a more thorough check agrees that these functions are unused,
they are currently incorrect, and fixed/removable flags on block devices
prior to probe are unreliable, just remove these functions instead of
fixing them. All potential users should have used blk_first_device_err
instead anyway.
CI results at [2].
[0] https://patchwork.ozlabs.org/project/uboot/patch/
20250714-blk-uclass-v1-1-
d21428c5f762@linaro.org/
[1] https://gist.github.com/gmalysa/
b05e73a5c14bc18c5741a0e0e06a2992
[2] https://gitlab.com/gmalysa/lnxdsp-u-boot/-/pipelines/
1931210857
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
Reviewed-by: Andrew Goodbody <andrew.goodbody@linaro.org>
return flags & req_flags ? 0 : 1;
}
-int blk_find_first(enum blk_flag_t flags, struct udevice **devp)
-{
- int ret;
-
- for (ret = uclass_find_first_device(UCLASS_BLK, devp);
- *devp && !blk_flags_check(*devp, flags);
- ret = uclass_find_next_device(devp))
- return 0;
-
- return -ENODEV;
-}
-
-int blk_find_next(enum blk_flag_t flags, struct udevice **devp)
-{
- int ret;
-
- for (ret = uclass_find_next_device(devp);
- *devp && !blk_flags_check(*devp, flags);
- ret = uclass_find_next_device(devp))
- return 0;
-
- return -ENODEV;
-}
-
int blk_first_device_err(enum blk_flag_t flags, struct udevice **devp)
{
for (uclass_first_device(UCLASS_BLK, devp);
*/
int blk_next_device_err(enum blk_flag_t flags, struct udevice **devp);
-/**
- * blk_find_first() - Return the first matching block device
- * @flags: Indicates type of device to return
- * @devp: Returns pointer to device, or NULL on error
- *
- * The device is not prepared for use - this is an internal function.
- * The function uclass_get_device_tail() can be used to probe the device.
- *
- * Note that some devices are considered removable until they have been probed
- *
- * @return 0 if found, -ENODEV if not found
- */
-int blk_find_first(enum blk_flag_t flags, struct udevice **devp);
-
-/**
- * blk_find_next() - Return the next matching block device
- * @flags: Indicates type of device to return
- * @devp: On entry, pointer to device to lookup. On exit, returns pointer
- * to the next device in the same uclass, or NULL if none
- *
- * The device is not prepared for use - this is an internal function.
- * The function uclass_get_device_tail() can be used to probe the device.
- *
- * Note that some devices are considered removable until they have been probed
- *
- * @return 0 if found, -ENODEV if not found
- */
-int blk_find_next(enum blk_flag_t flags, struct udevice **devp);
-
-/**
- * blk_foreach() - iterate through block devices
- *
- * This creates a for() loop which works through the available block devices in
- * order from start to end.
- *
- * If for some reason the uclass cannot be found, this does nothing.
- *
- * @_flags: Indicates type of device to return
- * @_pos: struct udevice * to hold the current device. Set to NULL when there
- * are no more devices.
- */
-#define blk_foreach(_flags, _pos) \
- for (int _ret = blk_find_first(_flags, &_pos); !_ret && _pos; \
- _ret = blk_find_next(_flags, &_pos))
-
/**
* blk_foreach_probe() - Helper function to iteration through block devices
*
{
struct udevice *dev;
- /* Iterate through devices without probing them */
- ut_assertok(blk_find_first(BLKF_BOTH, &dev));
- ut_assertnonnull(dev);
- ut_asserteq_str("mmc2.blk", dev->name);
-
- ut_assertok(blk_find_next(BLKF_BOTH, &dev));
- ut_assertnonnull(dev);
- ut_asserteq_str("mmc1.blk", dev->name);
-
- ut_assertok(blk_find_next(BLKF_BOTH, &dev));
- ut_assertnonnull(dev);
- ut_asserteq_str("mmc0.blk", dev->name);
-
- ut_asserteq(-ENODEV, blk_find_next(BLKF_BOTH, &dev));
- ut_assertnull(dev);
-
- /* All devices are removable until probed */
- ut_asserteq(-ENODEV, blk_find_first(BLKF_FIXED, &dev));
-
- ut_assertok(blk_find_first(BLKF_REMOVABLE, &dev));
- ut_assertnonnull(dev);
- ut_asserteq_str("mmc2.blk", dev->name);
-
- /* Now probe them and iterate again */
+ /* Probe and look through block devices */
ut_assertok(blk_first_device_err(BLKF_BOTH, &dev));
ut_assertnonnull(dev);
ut_asserteq_str("mmc2.blk", dev->name);
}
DM_TEST(dm_test_blk_flags, UTF_SCAN_PDATA | UTF_SCAN_FDT);
-/* Test blk_foreach() and friend */
+/* Test blk_foreach_probe() */
static int dm_test_blk_foreach(struct unit_test_state *uts)
{
struct udevice *dev;
int found;
- /* Test blk_foreach() - use the 3rd bytes of the name (0/1/2) */
- found = 0;
- blk_foreach(BLKF_BOTH, dev)
- found |= 1 << dectoul(&dev->name[3], NULL);
- ut_asserteq(7, found);
-
- /* All devices are removable until probed */
- found = 0;
- blk_foreach(BLKF_FIXED, dev)
- found |= 1 << dectoul(&dev->name[3], NULL);
- ut_asserteq(0, found);
-
- found = 0;
- blk_foreach(BLKF_REMOVABLE, dev)
- found |= 1 << dectoul(&dev->name[3], NULL);
- ut_asserteq(7, found);
-
- /* Now try again with the probing functions */
+ /* The test device tree has two fixed and one removable block device(s) */
found = 0;
blk_foreach_probe(BLKF_BOTH, dev)
found |= 1 << dectoul(&dev->name[3], NULL);