dt-bindings: gpio: cdns: convert to YAML

Convert Cadence family GPIO controller bindings to DT schema.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Harshit Shah <hshah@axiado.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/Documentation/devicetree/bindings/gpio/cdns,gpio.txt b/Documentation/devicetree/bindings/gpio/cdns,gpio.txt
deleted file mode 100644 (file)
index 706ef00..0000000
--- a/Documentation/devicetree/bindings/gpio/cdns,gpio.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Cadence GPIO controller bindings
-
-Required properties:
-- compatible: should be "cdns,gpio-r1p02".
-- reg: the register base address and size.
-- #gpio-cells: should be 2.
-       * first cell is the GPIO number.
-       * second cell specifies the GPIO flags, as defined in
-               <dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH
-               and GPIO_ACTIVE_LOW flags are supported.
-- gpio-controller: marks the device as a GPIO controller.
-- clocks: should contain one entry referencing the peripheral clock driving
-       the GPIO controller.
-
-Optional properties:
-- ngpios: integer number of gpio lines supported by this controller, up to 32.
-- interrupts: interrupt specifier for the controllers interrupt.
-- interrupt-controller: marks the device as an interrupt controller. When
-       defined, interrupts, interrupt-parent and #interrupt-cells
-       are required.
-- interrupt-cells: should be 2.
-       * first cell is the GPIO number you want to use as an IRQ source.
-       * second cell specifies the IRQ type, as defined in
-               <dt-bindings/interrupt-controller/irq.h>.
-               Currently only level sensitive IRQs are supported.
-
-
-Example:
-       gpio0: gpio-controller@fd060000 {
-               compatible = "cdns,gpio-r1p02";
-               reg =<0xfd060000 0x1000>;
-
-               clocks = <&gpio_clk>;
-
-               interrupt-parent = <&gic>;
-               interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
-
-               gpio-controller;
-               #gpio-cells = <2>;
-
-               interrupt-controller;
-               #interrupt-cells = <2>;
-       };

diff --git a/Documentation/devicetree/bindings/gpio/cdns,gpio.yaml b/Documentation/devicetree/bindings/gpio/cdns,gpio.yaml
new file mode 100644 (file)
index 0000000..f1a64c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/cdns,gpio.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/cdns,gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence GPIO Controller
+
+maintainers:
+  - Jan Kotas <jank@cadence.com>
+
+properties:
+  compatible:
+    const: cdns,gpio-r1p02
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      - First cell is the GPIO line number.
+      - Second cell is flags as defined in <dt-bindings/gpio/gpio.h>,
+        only GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW supported.
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+    description: |
+      - First cell is the GPIO line number used as IRQ.
+      - Second cell is the trigger type, as defined in
+        <dt-bindings/interrupt-controller/irq.h>.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - gpio-controller
+  - "#gpio-cells"
+
+if:
+  required: [interrupt-controller]
+then:
+  required:
+    - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    gpio0: gpio-controller@fd060000 {
+        compatible = "cdns,gpio-r1p02";
+        reg = <0xfd060000 0x1000>;
+        clocks = <&gpio_clk>;
+
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };