+++ /dev/null
-"\t\t(all)" = "\t\t(all)";
-"\t\t(none)" = "\t\t(none)";
-"\t%d entries" = "\t%d entries";
-"\t%s" = "\t%s";
-"\tAfter fault: continue" = "\tAfter fault: continue";
-"\tAlerts: %s" = "\tAlerts: %s";
-"\tBanner required" = "\tBanner required";
-"\tCharset sets:" = "\tCharset sets:";
-"\tConnection: direct" = "\tConnection: direct";
-"\tConnection: remote" = "\tConnection: remote";
-"\tContent types: any" = "\tContent types: any";
-"\tDefault page size:" = "\tDefault page size:";
-"\tDefault pitch:" = "\tDefault pitch:";
-"\tDefault port settings:" = "\tDefault port settings:";
-"\tDescription: %s" = "\tDescription: %s";
-"\tForm mounted:" = "\tForm mounted:";
-"\tForms allowed:" = "\tForms allowed:";
-"\tInterface: %s.ppd" = "\tInterface: %s.ppd";
-"\tInterface: %s/ppd/%s.ppd" = "\tInterface: %s/ppd/%s.ppd";
-"\tLocation: %s" = "\tLocation: %s";
-"\tOn fault: no alert" = "\tOn fault: no alert";
-"\tPrinter types: unknown" = "\tPrinter types: unknown";
-"\tStatus: %s" = "\tStatus: %s";
-"\tUsers allowed:" = "\tUsers allowed:";
-"\tUsers denied:" = "\tUsers denied:";
-"\tdaemon present" = "\tdaemon present";
-"\tno entries" = "\tno entries";
-"\tprinter is on device '%s' speed -1" = "\tprinter is on device ‘%s’ speed -1";
-"\tprinting is disabled" = "\tprinting is disabled";
-"\tprinting is enabled" = "\tprinting is enabled";
-"\tqueued for %s" = "\tqueued for %s";
-"\tqueuing is disabled" = "\tqueuing is disabled";
-"\tqueuing is enabled" = "\tqueuing is enabled";
-"\treason unknown" = "\treason unknown";
-"\n DETAILED CONFORMANCE TEST RESULTS" = "\n DETAILED CONFORMANCE TEST RESULTS";
-" REF: Page 15, section 3.1." = " REF: Page 15, section 3.1.";
-" REF: Page 15, section 3.2." = " REF: Page 15, section 3.2.";
-" REF: Page 19, section 3.3." = " REF: Page 19, section 3.3.";
-" REF: Page 20, section 3.4." = " REF: Page 20, section 3.4.";
-" REF: Page 27, section 3.5." = " REF: Page 27, section 3.5.";
-" REF: Page 42, section 5.2." = " REF: Page 42, section 5.2.";
-" REF: Pages 16-17, section 3.2." = " REF: Pages 16-17, section 3.2.";
-" REF: Pages 42-45, section 5.2." = " REF: Pages 42-45, section 5.2.";
-" REF: Pages 45-46, section 5.2." = " REF: Pages 45-46, section 5.2.";
-" REF: Pages 48-49, section 5.2." = " REF: Pages 48-49, section 5.2.";
-" REF: Pages 52-54, section 5.2." = " REF: Pages 52-54, section 5.2.";
-" %-39.39s %.0f bytes" = " %-39.39s %.0f bytes";
-" PASS Default%s" = " PASS Default%s";
-" PASS DefaultImageableArea" = " PASS DefaultImageableArea";
-" PASS DefaultPaperDimension" = " PASS DefaultPaperDimension";
-" PASS FileVersion" = " PASS FileVersion";
-" PASS FormatVersion" = " PASS FormatVersion";
-" PASS LanguageEncoding" = " PASS LanguageEncoding";
-" PASS LanguageVersion" = " PASS LanguageVersion";
-" PASS Manufacturer" = " PASS Manufacturer";
-" PASS ModelName" = " PASS ModelName";
-" PASS NickName" = " PASS NickName";
-" PASS PCFileName" = " PASS PCFileName";
-" PASS PSVersion" = " PASS PSVersion";
-" PASS PageRegion" = " PASS PageRegion";
-" PASS PageSize" = " PASS PageSize";
-" PASS Product" = " PASS Product";
-" PASS ShortNickName" = " PASS ShortNickName";
-" WARN %s has no corresponding options." = " WARN %s has no corresponding options.";
-" WARN %s shares a common prefix with %s\n REF: Page 15, section 3.2." = " WARN %s shares a common prefix with %s\n REF: Page 15, section 3.2.";
-" WARN Duplex option keyword %s may not work as expected and should be named Duplex.\n REF: Page 122, section 5.17" = " WARN Duplex option keyword %s may not work as expected and should be named Duplex.\n REF: Page 122, section 5.17";
-" WARN File contains a mix of CR, LF, and CR LF line endings." = " WARN File contains a mix of CR, LF, and CR LF line endings.";
-" WARN LanguageEncoding required by PPD 4.3 spec.\n REF: Pages 56-57, section 5.3." = " WARN LanguageEncoding required by PPD 4.3 spec.\n REF: Pages 56-57, section 5.3.";
-" WARN Line %d only contains whitespace." = " WARN Line %d only contains whitespace.";
-" WARN Manufacturer required by PPD 4.3 spec.\n REF: Pages 58-59, section 5.3." = " WARN Manufacturer required by PPD 4.3 spec.\n REF: Pages 58-59, section 5.3.";
-" WARN Non-Windows PPD files should use lines ending with only LF, not CR LF." = " WARN Non-Windows PPD files should use lines ending with only LF, not CR LF.";
-" WARN Obsolete PPD version %.1f.\n REF: Page 42, section 5.2." = " WARN Obsolete PPD version %.1f.\n REF: Page 42, section 5.2.";
-" WARN PCFileName longer than 8.3 in violation of PPD spec.\n REF: Pages 61-62, section 5.3." = " WARN PCFileName longer than 8.3 in violation of PPD spec.\n REF: Pages 61-62, section 5.3.";
-" WARN PCFileName should contain a unique filename.\n REF: Pages 61-62, section 5.3." = " WARN PCFileName should contain a unique filename.\n REF: Pages 61-62, section 5.3.";
-" WARN Protocols contains PJL but JCL attributes are not set.\n REF: Pages 78-79, section 5.7." = " WARN Protocols contains PJL but JCL attributes are not set.\n REF: Pages 78-79, section 5.7.";
-" WARN Protocols contains both PJL and BCP; expected TBCP.\n REF: Pages 78-79, section 5.7." = " WARN Protocols contains both PJL and BCP; expected TBCP.\n REF: Pages 78-79, section 5.7.";
-" WARN ShortNickName required by PPD 4.3 spec.\n REF: Pages 64-65, section 5.3." = " WARN ShortNickName required by PPD 4.3 spec.\n REF: Pages 64-65, section 5.3.";
-" %s \"%s %s\" conflicts with \"%s %s\"\n (constraint=\"%s %s %s %s\")." = " %s “%s %s” conflicts with “%s %s”\n (constraint=“%s %s %s %s”).";
-" %s %s %s does not exist." = " %s %s %s does not exist.";
-" %s %s file \"%s\" has the wrong capitalization." = " %s %s file “%s” has the wrong capitalization.";
-" %s Bad %s choice %s.\n REF: Page 122, section 5.17" = " %s Bad %s choice %s.\n REF: Page 122, section 5.17";
-" %s Bad UTF-8 \"%s\" translation string for option %s, choice %s." = " %s Bad UTF-8 “%s” translation string for option %s, choice %s.";
-" %s Bad UTF-8 \"%s\" translation string for option %s." = " %s Bad UTF-8 “%s” translation string for option %s.";
-" %s Bad cupsFilter value \"%s\"." = " %s Bad cupsFilter value “%s”.";
-" %s Bad cupsFilter2 value \"%s\"." = " %s Bad cupsFilter2 value “%s”.";
-" %s Bad cupsICCProfile %s." = " %s Bad cupsICCProfile %s.";
-" %s Bad cupsPreFilter value \"%s\"." = " %s Bad cupsPreFilter value “%s”.";
-" %s Bad cupsUIConstraints %s: \"%s\"" = " %s Bad cupsUIConstraints %s: “%s”";
-" %s Bad language \"%s\"." = " %s Bad language “%s”.";
-" %s Bad permissions on %s file \"%s\"." = " %s Bad permissions on %s file “%s”.";
-" %s Bad spelling of %s - should be %s." = " %s Bad spelling of %s - should be %s.";
-" %s Cannot provide both APScanAppPath and APScanAppBundleID." = " %s Cannot provide both APScanAppPath and APScanAppBundleID.";
-" %s Default choices conflicting." = " %s Default choices conflicting.";
-" %s Empty cupsUIConstraints %s" = " %s Empty cupsUIConstraints %s";
-" %s Missing \"%s\" translation string for option %s, choice %s." = " %s Missing “%s” translation string for option %s, choice %s.";
-" %s Missing \"%s\" translation string for option %s." = " %s Missing “%s” translation string for option %s.";
-" %s Missing %s file \"%s\"." = " %s Missing %s file “%s”.";
-" %s Missing REQUIRED PageRegion option.\n REF: Page 100, section 5.14." = " %s Missing REQUIRED PageRegion option.\n REF: Page 100, section 5.14.";
-" %s Missing REQUIRED PageSize option.\n REF: Page 99, section 5.14." = " %s Missing REQUIRED PageSize option.\n REF: Page 99, section 5.14.";
-" %s Missing choice *%s %s in UIConstraints \"*%s %s *%s %s\"." = " %s Missing choice *%s %s in UIConstraints “*%s %s *%s %s”.";
-" %s Missing choice *%s %s in cupsUIConstraints %s: \"%s\"" = " %s Missing choice *%s %s in cupsUIConstraints %s: “%s”";
-" %s Missing cupsUIResolver %s" = " %s Missing cupsUIResolver %s";
-" %s Missing option %s in UIConstraints \"*%s %s *%s %s\"." = " %s Missing option %s in UIConstraints “*%s %s *%s %s”.";
-" %s Missing option %s in cupsUIConstraints %s: \"%s\"" = " %s Missing option %s in cupsUIConstraints %s: “%s”";
-" %s No base translation \"%s\" is included in file." = " %s No base translation “%s” is included in file.";
-" %s REQUIRED %s does not define choice None.\n REF: Page 122, section 5.17" = " %s REQUIRED %s does not define choice None.\n REF: Page 122, section 5.17";
-" %s Size \"%s\" defined for %s but not for %s." = " %s Size “%s” defined for %s but not for %s.";
-" %s Size \"%s\" has unexpected dimensions (%gx%g)." = " %s Size “%s” has unexpected dimensions (%gx%g).";
-" %s Size \"%s\" should be \"%s\"." = " %s Size “%s” should be “%s”.";
-" %s Size \"%s\" should be the Adobe standard name \"%s\"." = " %s Size “%s” should be the Adobe standard name “%s”.";
-" %s cupsICCProfile %s hash value collides with %s." = " %s cupsICCProfile %s hash value collides with %s.";
-" %s cupsUIResolver %s causes a loop." = " %s cupsUIResolver %s causes a loop.";
-" %s cupsUIResolver %s does not list at least two different options." = " %s cupsUIResolver %s does not list at least two different options.";
-" **FAIL** %s must be 1284DeviceID\n REF: Page 72, section 5.5" = " **FAIL** %s must be 1284DeviceID\n REF: Page 72, section 5.5";
-" **FAIL** Bad Default%s %s\n REF: Page 40, section 4.5." = " **FAIL** Bad Default%s %s\n REF: Page 40, section 4.5.";
-" **FAIL** Bad DefaultImageableArea %s\n REF: Page 102, section 5.15." = " **FAIL** Bad DefaultImageableArea %s\n REF: Page 102, section 5.15.";
-" **FAIL** Bad DefaultPaperDimension %s\n REF: Page 103, section 5.15." = " **FAIL** Bad DefaultPaperDimension %s\n REF: Page 103, section 5.15.";
-" **FAIL** Bad FileVersion \"%s\"\n REF: Page 56, section 5.3." = " **FAIL** Bad FileVersion “%s”\n REF: Page 56, section 5.3.";
-" **FAIL** Bad FormatVersion \"%s\"\n REF: Page 56, section 5.3." = " **FAIL** Bad FormatVersion “%s”\n REF: Page 56, section 5.3.";
-" **FAIL** Bad JobPatchFile attribute in file\n REF: Page 24, section 3.4." = " **FAIL** Bad JobPatchFile attribute in file\n REF: Page 24, section 3.4.";
-" **FAIL** Bad LanguageEncoding %s - must be ISOLatin1." = " **FAIL** Bad LanguageEncoding %s - must be ISOLatin1.";
-" **FAIL** Bad LanguageVersion %s - must be English." = " **FAIL** Bad LanguageVersion %s - must be English.";
-" **FAIL** Bad Manufacturer (should be \"%s\")\n REF: Page 211, table D.1." = " **FAIL** Bad Manufacturer (should be “%s”)\n REF: Page 211, table D.1.";
-" **FAIL** Bad ModelName - \"%c\" not allowed in string.\n REF: Pages 59-60, section 5.3." = " **FAIL** Bad ModelName - “%c” not allowed in string.\n REF: Pages 59-60, section 5.3.";
-" **FAIL** Bad PSVersion - not \"(string) int\".\n REF: Pages 62-64, section 5.3." = " **FAIL** Bad PSVersion - not “(string) int”.\n REF: Pages 62-64, section 5.3.";
-" **FAIL** Bad Product - not \"(string)\".\n REF: Page 62, section 5.3." = " **FAIL** Bad Product - not “(string)”.\n REF: Page 62, section 5.3.";
-" **FAIL** Bad ShortNickName - longer than 31 chars.\n REF: Pages 64-65, section 5.3." = " **FAIL** Bad ShortNickName - longer than 31 chars.\n REF: Pages 64-65, section 5.3.";
-" **FAIL** Bad option %s choice %s\n REF: Page 84, section 5.9" = " **FAIL** Bad option %s choice %s\n REF: Page 84, section 5.9";
-" **FAIL** Default option code cannot be interpreted: %s" = " **FAIL** Default option code cannot be interpreted: %s";
-" **FAIL** Default translation string for option %s choice %s contains 8-bit characters." = " **FAIL** Default translation string for option %s choice %s contains 8-bit characters.";
-" **FAIL** Default translation string for option %s contains 8-bit characters." = " **FAIL** Default translation string for option %s contains 8-bit characters.";
-" **FAIL** Group names %s and %s differ only by case." = " **FAIL** Group names %s and %s differ only by case.";
-" **FAIL** Multiple occurrences of option %s choice name %s." = " **FAIL** Multiple occurrences of option %s choice name %s.";
-" **FAIL** Option %s choice names %s and %s differ only by case." = " **FAIL** Option %s choice names %s and %s differ only by case.";
-" **FAIL** Option names %s and %s differ only by case." = " **FAIL** Option names %s and %s differ only by case.";
-" **FAIL** REQUIRED Default%s\n REF: Page 40, section 4.5." = " **FAIL** REQUIRED Default%s\n REF: Page 40, section 4.5.";
-" **FAIL** REQUIRED DefaultImageableArea\n REF: Page 102, section 5.15." = " **FAIL** REQUIRED DefaultImageableArea\n REF: Page 102, section 5.15.";
-" **FAIL** REQUIRED DefaultPaperDimension\n REF: Page 103, section 5.15." = " **FAIL** REQUIRED DefaultPaperDimension\n REF: Page 103, section 5.15.";
-" **FAIL** REQUIRED FileVersion\n REF: Page 56, section 5.3." = " **FAIL** REQUIRED FileVersion\n REF: Page 56, section 5.3.";
-" **FAIL** REQUIRED FormatVersion\n REF: Page 56, section 5.3." = " **FAIL** REQUIRED FormatVersion\n REF: Page 56, section 5.3.";
-" **FAIL** REQUIRED ImageableArea for PageSize %s\n REF: Page 41, section 5.\n REF: Page 102, section 5.15." = " **FAIL** REQUIRED ImageableArea for PageSize %s\n REF: Page 41, section 5.\n REF: Page 102, section 5.15.";
-" **FAIL** REQUIRED LanguageEncoding\n REF: Pages 56-57, section 5.3." = " **FAIL** REQUIRED LanguageEncoding\n REF: Pages 56-57, section 5.3.";
-" **FAIL** REQUIRED LanguageVersion\n REF: Pages 57-58, section 5.3." = " **FAIL** REQUIRED LanguageVersion\n REF: Pages 57-58, section 5.3.";
-" **FAIL** REQUIRED Manufacturer\n REF: Pages 58-59, section 5.3." = " **FAIL** REQUIRED Manufacturer\n REF: Pages 58-59, section 5.3.";
-" **FAIL** REQUIRED ModelName\n REF: Pages 59-60, section 5.3." = " **FAIL** REQUIRED ModelName\n REF: Pages 59-60, section 5.3.";
-" **FAIL** REQUIRED NickName\n REF: Page 60, section 5.3." = " **FAIL** REQUIRED NickName\n REF: Page 60, section 5.3.";
-" **FAIL** REQUIRED PCFileName\n REF: Pages 61-62, section 5.3." = " **FAIL** REQUIRED PCFileName\n REF: Pages 61-62, section 5.3.";
-" **FAIL** REQUIRED PSVersion\n REF: Pages 62-64, section 5.3." = " **FAIL** REQUIRED PSVersion\n REF: Pages 62-64, section 5.3.";
-" **FAIL** REQUIRED PageRegion\n REF: Page 100, section 5.14." = " **FAIL** REQUIRED PageRegion\n REF: Page 100, section 5.14.";
-" **FAIL** REQUIRED PageSize\n REF: Page 41, section 5.\n REF: Page 99, section 5.14." = " **FAIL** REQUIRED PageSize\n REF: Page 41, section 5.\n REF: Page 99, section 5.14.";
-" **FAIL** REQUIRED PageSize\n REF: Pages 99-100, section 5.14." = " **FAIL** REQUIRED PageSize\n REF: Pages 99-100, section 5.14.";
-" **FAIL** REQUIRED PaperDimension for PageSize %s\n REF: Page 41, section 5.\n REF: Page 103, section 5.15." = " **FAIL** REQUIRED PaperDimension for PageSize %s\n REF: Page 41, section 5.\n REF: Page 103, section 5.15.";
-" **FAIL** REQUIRED Product\n REF: Page 62, section 5.3." = " **FAIL** REQUIRED Product\n REF: Page 62, section 5.3.";
-" **FAIL** REQUIRED ShortNickName\n REF: Page 64-65, section 5.3." = " **FAIL** REQUIRED ShortNickName\n REF: Page 64-65, section 5.3.";
-" **FAIL** Unable to open PPD file - %s on line %d." = " **FAIL** Unable to open PPD file - %s on line %d.";
-" %d ERRORS FOUND" = " %d ERRORS FOUND";
-" NO ERRORS FOUND" = " NO ERRORS FOUND";
-" --cr End lines with CR (Mac OS 9)." = " --cr End lines with CR (Mac OS 9).";
-" --crlf End lines with CR + LF (Windows)." = " --crlf End lines with CR + LF (Windows).";
-" --lf End lines with LF (UNIX/Linux/macOS)." = " --lf End lines with LF (UNIX/Linux/macOS).";
-" --list-all List all filters with the MIME media types." = " --list-all List all filters with the MIME media types.";
-" --list-filters List filters that will be used." = " --list-filters List filters that will be used.";
-" -D Remove the input file when finished." = " -D Remove the input file when finished.";
-" -D name=value Set named variable to value." = " -D name=value Set named variable to value.";
-" -I include-dir Add include directory to search path." = " -I include-dir Add include directory to search path.";
-" -P FILENAME.ppd Set PPD file." = " -P FILENAME.ppd Set PPD file.";
-" -U USERNAME Specify username." = " -U USERNAME Specify username.";
-" -c catalog.po Load the specified message catalog." = " -c catalog.po Load the specified message catalog.";
-" -c cups-files.conf Set cups-files.conf file to use." = " -c cups-files.conf Set cups-files.conf file to use.";
-" -d PRINTER Use the named printer." = " -d PRINTER Use the named printer.";
-" -d output-dir Specify the output directory." = " -d output-dir Specify the output directory.";
-" -e Use every filter from the PPD file." = " -e Use every filter from the PPD file.";
-" -i MIME/TYPE Set input MIME type (otherwise auto-typed)." = " -i MIME/TYPE Set input MIME type (otherwise auto-typed).";
-" -j JOB-ID[,N] Filter file N from the specified job (default is file 1)." = " -j JOB-ID[,N] Filter file N from the specified job (default is file 1).";
-" -l lang[,lang,...] Specify the output language(s) (locale)." = " -l lang[,lang,…] Specify the output language(s) (locale).";
-" -m Use the ModelName value as the filename." = " -m Use the ModelName value as the filename.";
-" -m MIME/TYPE Set output MIME type (otherwise application/pdf)." = " -m MIME/TYPE Set output MIME type (otherwise application/pdf).";
-" -n COPIES Set number of copies." = " -n COPIES Set number of copies.";
-" -o NAME=VALUE Set option(s)." = " -o NAME=VALUE Set option(s).";
-" -o filename.drv Set driver information file (otherwise ppdi.drv)." = " -o filename.drv Set driver information file (otherwise ppdi.drv).";
-" -o filename.ppd[.gz] Set output file (otherwise stdout)." = " -o filename.ppd[.gz] Set output file (otherwise stdout).";
-" -p FILENAME.ppd Set PPD file." = " -p FILENAME.ppd Set PPD file.";
-" -t Test PPDs instead of generating them." = " -t Test PPDs instead of generating them.";
-" -t TITLE Set title." = " -t TITLE Set title.";
-" -u Remove the PPD file when finished." = " -u Remove the PPD file when finished.";
-" -v Be verbose." = " -v Be verbose.";
-" -z Compress PPD files using GNU zip." = " -z Compress PPD files using GNU zip.";
-" FAIL" = " FAIL";
-" PASS" = " PASS";
-"! expression Unary NOT of expression" = "! expression Unary NOT of expression";
-"\"%s\": Bad URI value \"%s\" - %s (RFC 8011 section 5.1.6)." = "“%s”: Bad URI value “%s” - %s (RFC 8011 section 5.1.6).";
-"\"%s\": Bad URI value \"%s\" - bad length %d (RFC 8011 section 5.1.6)." = "“%s”: Bad URI value “%s” - bad length %d (RFC 8011 section 5.1.6).";
-"\"%s\": Bad attribute name - bad length %d (RFC 8011 section 5.1.4)." = "“%s”: Bad attribute name - bad length %d (RFC 8011 section 5.1.4).";
-"\"%s\": Bad attribute name - invalid character (RFC 8011 section 5.1.4)." = "“%s”: Bad attribute name - invalid character (RFC 8011 section 5.1.4).";
-"\"%s\": Bad boolean value %d (RFC 8011 section 5.1.21)." = "“%s”: Bad boolean value %d (RFC 8011 section 5.1.21).";
-"\"%s\": Bad charset value \"%s\" - bad characters (RFC 8011 section 5.1.8)." = "“%s”: Bad charset value “%s” - bad characters (RFC 8011 section 5.1.8).";
-"\"%s\": Bad charset value \"%s\" - bad length %d (RFC 8011 section 5.1.8)." = "“%s”: Bad charset value “%s” - bad length %d (RFC 8011 section 5.1.8).";
-"\"%s\": Bad dateTime UTC hours %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC hours %u (RFC 8011 section 5.1.15).";
-"\"%s\": Bad dateTime UTC minutes %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC minutes %u (RFC 8011 section 5.1.15).";
-"\"%s\": Bad dateTime UTC sign '%c' (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC sign ‘%c’ (RFC 8011 section 5.1.15).";
-"\"%s\": Bad dateTime day %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime day %u (RFC 8011 section 5.1.15).";
-"\"%s\": Bad dateTime deciseconds %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime deciseconds %u (RFC 8011 section 5.1.15).";
-"\"%s\": Bad dateTime hours %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime hours %u (RFC 8011 section 5.1.15).";
-"\"%s\": Bad dateTime minutes %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime minutes %u (RFC 8011 section 5.1.15).";
-"\"%s\": Bad dateTime month %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime month %u (RFC 8011 section 5.1.15).";
-"\"%s\": Bad dateTime seconds %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime seconds %u (RFC 8011 section 5.1.15).";
-"\"%s\": Bad enum value %d - out of range (RFC 8011 section 5.1.5)." = "“%s”: Bad enum value %d - out of range (RFC 8011 section 5.1.5).";
-"\"%s\": Bad keyword value \"%s\" - bad length %d (RFC 8011 section 5.1.4)." = "“%s”: Bad keyword value “%s” - bad length %d (RFC 8011 section 5.1.4).";
-"\"%s\": Bad keyword value \"%s\" - invalid character (RFC 8011 section 5.1.4)." = "“%s”: Bad keyword value “%s” - invalid character (RFC 8011 section 5.1.4).";
-"\"%s\": Bad mimeMediaType value \"%s\" - bad characters (RFC 8011 section 5.1.10)." = "“%s”: Bad mimeMediaType value “%s” - bad characters (RFC 8011 section 5.1.10).";
-"\"%s\": Bad mimeMediaType value \"%s\" - bad length %d (RFC 8011 section 5.1.10)." = "“%s”: Bad mimeMediaType value “%s” - bad length %d (RFC 8011 section 5.1.10).";
-"\"%s\": Bad name value \"%s\" - bad UTF-8 sequence (RFC 8011 section 5.1.3)." = "“%s”: Bad name value “%s” - bad UTF-8 sequence (RFC 8011 section 5.1.3).";
-"\"%s\": Bad name value \"%s\" - bad control character (PWG 5100.14 section 8.1)." = "“%s”: Bad name value “%s” - bad control character (PWG 5100.14 section 8.1).";
-"\"%s\": Bad name value \"%s\" - bad length %d (RFC 8011 section 5.1.3)." = "“%s”: Bad name value “%s” - bad length %d (RFC 8011 section 5.1.3).";
-"\"%s\": Bad naturalLanguage value \"%s\" - bad characters (RFC 8011 section 5.1.9)." = "“%s”: Bad naturalLanguage value “%s” - bad characters (RFC 8011 section 5.1.9).";
-"\"%s\": Bad naturalLanguage value \"%s\" - bad length %d (RFC 8011 section 5.1.9)." = "“%s”: Bad naturalLanguage value “%s” - bad length %d (RFC 8011 section 5.1.9).";
-"\"%s\": Bad octetString value - bad length %d (RFC 8011 section 5.1.20)." = "“%s”: Bad octetString value - bad length %d (RFC 8011 section 5.1.20).";
-"\"%s\": Bad rangeOfInteger value %d-%d - lower greater than upper (RFC 8011 section 5.1.14)." = "“%s”: Bad rangeOfInteger value %d-%d - lower greater than upper (RFC 8011 section 5.1.14).";
-"\"%s\": Bad resolution value %dx%d%s - bad units value (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - bad units value (RFC 8011 section 5.1.16).";
-"\"%s\": Bad resolution value %dx%d%s - cross feed resolution must be positive (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - cross feed resolution must be positive (RFC 8011 section 5.1.16).";
-"\"%s\": Bad resolution value %dx%d%s - feed resolution must be positive (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - feed resolution must be positive (RFC 8011 section 5.1.16).";
-"\"%s\": Bad text value \"%s\" - bad UTF-8 sequence (RFC 8011 section 5.1.2)." = "“%s”: Bad text value “%s” - bad UTF-8 sequence (RFC 8011 section 5.1.2).";
-"\"%s\": Bad text value \"%s\" - bad control character (PWG 5100.14 section 8.3)." = "“%s”: Bad text value “%s” - bad control character (PWG 5100.14 section 8.3).";
-"\"%s\": Bad text value \"%s\" - bad length %d (RFC 8011 section 5.1.2)." = "“%s”: Bad text value “%s” - bad length %d (RFC 8011 section 5.1.2).";
-"\"%s\": Bad uriScheme value \"%s\" - bad characters (RFC 8011 section 5.1.7)." = "“%s”: Bad uriScheme value “%s” - bad characters (RFC 8011 section 5.1.7).";
-"\"%s\": Bad uriScheme value \"%s\" - bad length %d (RFC 8011 section 5.1.7)." = "“%s”: Bad uriScheme value “%s” - bad length %d (RFC 8011 section 5.1.7).";
-"\"requesting-user-name\" attribute in wrong group." = "“requesting-user-name” attribute in wrong group.";
-"\"requesting-user-name\" attribute with wrong syntax." = "“requesting-user-name” attribute with wrong syntax.";
-"%-7s %-7.7s %-7d %-31.31s %.0f bytes" = "%-7s %-7.7s %-7d %-31.31s %.0f bytes";
-"%d x %d mm" = "%d x %d mm";
-"%g x %g \"" = "%g x %g ″";
-"%s (%s)" = "%s (%s)";
-"%s (%s, %s)" = "%s (%s, %s)";
-"%s (Borderless)" = "%s (Borderless)";
-"%s (Borderless, %s)" = "%s (Borderless, %s)";
-"%s (Borderless, %s, %s)" = "%s (Borderless, %s, %s)";
-"%s accepting requests since %s" = "%s accepting requests since %s";
-"%s cannot be changed." = "%s cannot be changed.";
-"%s is not implemented by the CUPS version of lpc." = "%s is not implemented by the CUPS version of lpc.";
-"%s is not ready" = "%s is not ready";
-"%s is ready" = "%s is ready";
-"%s is ready and printing" = "%s is ready and printing";
-"%s job-id user title copies options [file]" = "%s job-id user title copies options [file]";
-"%s not accepting requests since %s -" = "%s not accepting requests since %s -";
-"%s not supported." = "%s not supported.";
-"%s/%s accepting requests since %s" = "%s/%s accepting requests since %s";
-"%s/%s not accepting requests since %s -" = "%s/%s not accepting requests since %s -";
-"%s: %-33.33s [job %d localhost]" = "%s: %-33.33s [job %d localhost]";
-// TRANSLATORS: Message is "subject: error"
-"%s: %s" = "%s: %s";
-"%s: %s failed: %s" = "%s: %s failed: %s";
-"%s: Bad version %s for \"-V\"." = "%s: Bad version %s for “-V”.";
-"%s: Don't know what to do." = "%s: Don’t know what to do.";
-"%s: Error - %s" = "%s: Error - %s";
-"%s: Error - %s environment variable names non-existent destination \"%s\"." = "%s: Error - %s environment variable names non-existent destination “%s”.";
-"%s: Error - The printer or class does not exist." = "%s: Error - The printer or class does not exist.";
-"%s: Error - add '/version=1.1' to server name." = "%s: Error - add ‘/version=1.1’ to server name.";
-"%s: Error - bad job ID." = "%s: Error - bad job ID.";
-"%s: Error - cannot print files and alter jobs simultaneously." = "%s: Error - cannot print files and alter jobs simultaneously.";
-"%s: Error - cannot print from stdin if files or a job ID are provided." = "%s: Error - cannot print from stdin if files or a job ID are provided.";
-"%s: Error - copies must be 1 or more." = "%s: Error - copies must be 1 or more.";
-"%s: Error - expected \"username\" after \"-U\" option." = "%s: Error - expected “username” after “-U” option.";
-"%s: Error - expected PPD file after \"-%c\" option." = "%s: Error - expected PPD file after “-%c” option.";
-"%s: Error - expected character set after \"-S\" option." = "%s: Error - expected character set after “-S” option.";
-"%s: Error - expected content type after \"-T\" option." = "%s: Error - expected content type after “-T” option.";
-"%s: Error - expected copies after \"-#\" option." = "%s: Error - expected copies after “-#” option.";
-"%s: Error - expected copies after \"-n\" option." = "%s: Error - expected copies after “-n” option.";
-"%s: Error - expected destination MIME type after \"-m\" option." = "%s: Error - expected destination MIME type after “-m” option.";
-"%s: Error - expected destination after \"-P\" option." = "%s: Error - expected destination after “-P” option.";
-"%s: Error - expected destination after \"-d\" option." = "%s: Error - expected destination after “-d” option.";
-"%s: Error - expected filename after \"-c\" option." = "%s: Error - expected filename after “-c” option.";
-"%s: Error - expected form after \"-f\" option." = "%s: Error - expected form after “-f” option.";
-"%s: Error - expected hold name after \"-H\" option." = "%s: Error - expected hold name after “-H” option.";
-"%s: Error - expected hostname after \"-H\" option." = "%s: Error - expected hostname after “-H” option.";
-"%s: Error - expected hostname after \"-h\" option." = "%s: Error - expected hostname after “-h” option.";
-"%s: Error - expected input file after \"-f\" option." = "%s: Error - expected input file after “-f” option.";
-"%s: Error - expected job-id after \"-j\" option." = "%s: Error - expected job-id after “-j” option.";
-"%s: Error - expected mode list after \"-y\" option." = "%s: Error - expected mode list after “-y” option.";
-"%s: Error - expected name after \"-%c\" option." = "%s: Error - expected name after “-%c” option.";
-"%s: Error - expected name=value after \"-a\" option." = "%s: Error - expected name=value after “-a” option.";
-"%s: Error - expected name=value after \"-o\" option." = "%s: Error - expected name=value after “-o” option.";
-"%s: Error - expected number of copies after \"-n\" option." = "%s: Error - expected number of copies after “-n” option.";
-"%s: Error - expected option=value after \"-o\" option." = "%s: Error - expected option=value after “-o” option.";
-"%s: Error - expected page list after \"-P\" option." = "%s: Error - expected page list after “-P” option.";
-"%s: Error - expected printer name after \"-d\" option." = "%s: Error - expected printer name after “-d” option.";
-"%s: Error - expected priority after \"-%c\" option." = "%s: Error - expected priority after “-%c” option.";
-"%s: Error - expected reason text after \"-r\" option." = "%s: Error - expected reason text after “-r” option.";
-"%s: Error - expected source MIME type after \"-i\" option." = "%s: Error - expected source MIME type after “-i” option.";
-"%s: Error - expected title after \"-%c\" option." = "%s: Error - expected title after “-%c” option.";
-"%s: Error - expected title after \"-t\" option." = "%s: Error - expected title after “-t” option.";
-"%s: Error - expected username after \"-U\" option." = "%s: Error - expected username after “-U” option.";
-"%s: Error - expected username after \"-u\" option." = "%s: Error - expected username after “-u” option.";
-"%s: Error - expected value after \"-%c\" option." = "%s: Error - expected value after “-%c” option.";
-"%s: Error - need \"completed\", \"not-completed\", \"successful\", or \"all\" after \"-W\" option." = "%s: Error - need “completed”, “not-completed”, “successful”, or “all” after “-W” option.";
-"%s: Error - no default destination available." = "%s: Error - no default destination available.";
-"%s: Error - priority must be between 1 and 100." = "%s: Error - priority must be between 1 and 100.";
-"%s: Error - scheduler not responding." = "%s: Error - scheduler not responding.";
-"%s: Error - too many files - \"%s\"." = "%s: Error - too many files - “%s”.";
-"%s: Error - unable to access \"%s\" - %s" = "%s: Error - unable to access “%s” - %s";
-"%s: Error - unable to queue from stdin - %s." = "%s: Error - unable to queue from stdin - %s.";
-"%s: Error - unknown destination \"%s\"." = "%s: Error - unknown destination “%s”.";
-"%s: Error - unknown destination \"%s/%s\"." = "%s: Error - unknown destination “%s/%s”.";
-"%s: Error - unknown option \"%c\"." = "%s: Error - unknown option “%c”.";
-"%s: Error - unknown option \"%s\"." = "%s: Error - unknown option “%s”.";
-"%s: Error - unknown option \"-%c\"." = "%s: Error - unknown option “-%c”.";
-"%s: Expected job ID after \"-i\" option." = "%s: Expected job ID after “-i” option.";
-"%s: Invalid destination name in list \"%s\"." = "%s: Invalid destination name in list “%s”.";
-"%s: Invalid filter string \"%s\"." = "%s: Invalid filter string “%s”.";
-"%s: Missing filename for \"-P\"." = "%s: Missing filename for “-P”.";
-"%s: Missing timeout for \"-T\"." = "%s: Missing timeout for “-T”.";
-"%s: Missing version for \"-V\"." = "%s: Missing version for “-V”.";
-"%s: Need job ID (\"-i jobid\") before \"-H restart\"." = "%s: Need job ID (“-i jobid”) before “-H restart”.";
-"%s: No filter to convert from %s/%s to %s/%s." = "%s: No filter to convert from %s/%s to %s/%s.";
-"%s: Operation failed: %s" = "%s: Operation failed: %s";
-"%s: Scheduler is not running." = "%s: Scheduler is not running.";
-"%s: Unable to connect to server." = "%s: Unable to connect to server.";
-"%s: Unable to contact server." = "%s: Unable to contact server.";
-"%s: Unable to determine MIME type of \"%s\"." = "%s: Unable to determine MIME type of “%s”.";
-"%s: Unable to open \"%s\": %s" = "%s: Unable to open “%s”: %s";
-"%s: Unable to open %s: %s" = "%s: Unable to open %s: %s";
-"%s: Unable to open PPD file: %s on line %d." = "%s: Unable to open PPD file: %s on line %d.";
-"%s: Unable to read MIME database from \"%s\" or \"%s\"." = "%s: Unable to read MIME database from “%s” or “%s”.";
-"%s: Unknown argument \"%s\"." = "%s: Unknown argument “%s”.";
-"%s: Unknown destination \"%s\"." = "%s: Unknown destination “%s”.";
-"%s: Unknown destination MIME type %s/%s." = "%s: Unknown destination MIME type %s/%s.";
-"%s: Unknown option \"%c\"." = "%s: Unknown option “%c”.";
-"%s: Unknown option \"%s\"." = "%s: Unknown option “%s”.";
-"%s: Unknown option \"-%c\"." = "%s: Unknown option “-%c”.";
-"%s: Unknown source MIME type %s/%s." = "%s: Unknown source MIME type %s/%s.";
-"%s: Warning - \"%c\" format modifier not supported - output may not be correct." = "%s: Warning - “%c” format modifier not supported - output may not be correct.";
-"%s: Warning - character set option ignored." = "%s: Warning - character set option ignored.";
-"%s: Warning - content type option ignored." = "%s: Warning - content type option ignored.";
-"%s: Warning - form option ignored." = "%s: Warning - form option ignored.";
-"%s: Warning - mode option ignored." = "%s: Warning - mode option ignored.";
-"( expressions ) Group expressions" = "( expressions ) Group expressions";
-"- Cancel all jobs" = "- Cancel all jobs";
-"-# num-copies Specify the number of copies to print" = "-# num-copies Specify the number of copies to print";
-"--[no-]debug-logging Turn debug logging on/off" = "--[no-]debug-logging Turn debug logging on/off";
-"--[no-]remote-admin Turn remote administration on/off" = "--[no-]remote-admin Turn remote administration on/off";
-"--[no-]remote-any Allow/prevent access from the Internet" = "--[no-]remote-any Allow/prevent access from the Internet";
-"--[no-]share-printers Turn printer sharing on/off" = "--[no-]share-printers Turn printer sharing on/off";
-"--[no-]user-cancel-any Allow/prevent users to cancel any job" = "--[no-]user-cancel-any Allow/prevent users to cancel any job";
-"--device-id device-id Show models matching the given IEEE 1284 device ID" = "--device-id device-id Show models matching the given IEEE 1284 device ID";
-"--domain regex Match domain to regular expression" = "--domain regex Match domain to regular expression";
-"--exclude-schemes scheme-list\n Exclude the specified URI schemes" = "--exclude-schemes scheme-list\n Exclude the specified URI schemes";
-"--exec utility [argument ...] ;\n Execute program if true" = "--exec utility [argument …] ;\n Execute program if true";
-"--false Always false" = "--false Always false";
-"--help Show program help" = "--help Show program help";
-"--hold Hold new jobs" = "--hold Hold new jobs";
-"--host regex Match hostname to regular expression" = "--host regex Match hostname to regular expression";
-"--include-schemes scheme-list\n Include only the specified URI schemes" = "--include-schemes scheme-list\n Include only the specified URI schemes";
-"--ippserver filename Produce ippserver attribute file" = "--ippserver filename Produce ippserver attribute file";
-"--language locale Show models matching the given locale" = "--language locale Show models matching the given locale";
-"--literal-name name Match service name to literal name value" = "--literal-name name Match service name to literal name value";
-"--local True if service is local" = "--local True if service is local";
-"--ls List attributes" = "--ls List attributes";
-"--make-and-model name Show models matching the given make and model name" = "--make-and-model name Show models matching the given make and model name";
-"--name regex Match service name to regular expression" = "--name regex Match service name to regular expression";
-"--no-web-forms Disable web forms for media and supplies" = "--no-web-forms Disable web forms for media and supplies";
-"--not expression Unary NOT of expression" = "--not expression Unary NOT of expression";
-"--pam-service service Use the named PAM service" = "--pam-service service Use the named PAM service";
-"--path regex Match resource path to regular expression" = "--path regex Match resource path to regular expression";
-"--port number[-number] Match port to number or range" = "--port number[-number] Match port to number or range";
-"--print Print URI if true" = "--print Print URI if true";
-"--print-name Print service name if true" = "--print-name Print service name if true";
-"--product name Show models matching the given PostScript product" = "--product name Show models matching the given PostScript product";
-"--quiet Quietly report match via exit code" = "--quiet Quietly report match via exit code";
-"--release Release previously held jobs" = "--release Release previously held jobs";
-"--remote True if service is remote" = "--remote True if service is remote";
-"--stop-after-include-error\n Stop tests after a failed INCLUDE" = "--stop-after-include-error\n Stop tests after a failed INCLUDE";
-"--timeout seconds Specify the maximum number of seconds to discover devices" = "--timeout seconds Specify the maximum number of seconds to discover devices";
-"--true Always true" = "--true Always true";
-"--txt key True if the TXT record contains the key" = "--txt key True if the TXT record contains the key";
-"--txt-* regex Match TXT record key to regular expression" = "--txt-* regex Match TXT record key to regular expression";
-"--uri regex Match URI to regular expression" = "--uri regex Match URI to regular expression";
-"--version Show program version" = "--version Show program version";
-"--version Show version" = "--version Show version";
-"-1" = "-1";
-"-10" = "-10";
-"-100" = "-100";
-"-105" = "-105";
-"-11" = "-11";
-"-110" = "-110";
-"-115" = "-115";
-"-12" = "-12";
-"-120" = "-120";
-"-13" = "-13";
-"-14" = "-14";
-"-15" = "-15";
-"-2" = "-2";
-"-2 Set 2-sided printing support (default=1-sided)" = "-2 Set 2-sided printing support (default=1-sided)";
-"-20" = "-20";
-"-25" = "-25";
-"-3" = "-3";
-"-30" = "-30";
-"-35" = "-35";
-"-4" = "-4";
-"-4 Connect using IPv4" = "-4 Connect using IPv4";
-"-40" = "-40";
-"-45" = "-45";
-"-5" = "-5";
-"-50" = "-50";
-"-55" = "-55";
-"-6" = "-6";
-"-6 Connect using IPv6" = "-6 Connect using IPv6";
-"-60" = "-60";
-"-65" = "-65";
-"-7" = "-7";
-"-70" = "-70";
-"-75" = "-75";
-"-8" = "-8";
-"-80" = "-80";
-"-85" = "-85";
-"-9" = "-9";
-"-90" = "-90";
-"-95" = "-95";
-"-A Enable authentication" = "-A Enable authentication";
-"-C Send requests using chunking (default)" = "-C Send requests using chunking (default)";
-"-D description Specify the textual description of the printer" = "-D description Specify the textual description of the printer";
-"-D device-uri Set the device URI for the printer" = "-D device-uri Set the device URI for the printer";
-"-E Enable and accept jobs on the printer (after -p)" = "-E Enable and accept jobs on the printer (after -p)";
-"-E Encrypt the connection to the server" = "-E Encrypt the connection to the server";
-"-E Test with encryption using HTTP Upgrade to TLS" = "-E Test with encryption using HTTP Upgrade to TLS";
-"-F Run in the foreground but detach from console." = "-F Run in the foreground but detach from console.";
-"-F output-type/subtype Set the output format for the printer" = "-F output-type/subtype Set the output format for the printer";
-"-H Show the default server and port" = "-H Show the default server and port";
-"-H HH:MM Hold the job until the specified UTC time" = "-H HH:MM Hold the job until the specified UTC time";
-"-H hold Hold the job until released/resumed" = "-H hold Hold the job until released/resumed";
-"-H immediate Print the job as soon as possible" = "-H immediate Print the job as soon as possible";
-"-H restart Reprint the job" = "-H restart Reprint the job";
-"-H resume Resume a held job" = "-H resume Resume a held job";
-"-H server[:port] Connect to the named server and port" = "-H server[:port] Connect to the named server and port";
-"-I Ignore errors" = "-I Ignore errors";
-"-I {filename,filters,none,profiles}\n Ignore specific warnings" = "-I {filename,filters,none,profiles}\n Ignore specific warnings";
-"-K keypath Set location of server X.509 certificates and keys." = "-K keypath Set location of server X.509 certificates and keys.";
-"-L Send requests using content-length" = "-L Send requests using content-length";
-"-L location Specify the textual location of the printer" = "-L location Specify the textual location of the printer";
-"-M manufacturer Set manufacturer name (default=Test)" = "-M manufacturer Set manufacturer name (default=Test)";
-"-N name Match service name to literal name value" = "-N name Match service name to literal name value";
-"-P destination Show status for the specified destination" = "-P destination Show status for the specified destination";
-"-P destination Specify the destination" = "-P destination Specify the destination";
-"-P filename.plist Produce XML plist to a file and test report to standard output" = "-P filename.plist Produce XML plist to a file and test report to standard output";
-"-P number[-number] Match port to number or range" = "-P number[-number] Match port to number or range";
-"-P page-list Specify a list of pages to print" = "-P page-list Specify a list of pages to print";
-"-R Repeat tests on server-error-busy" = "-R Repeat tests on server-error-busy";
-"-R Show the ranking of jobs" = "-R Show the ranking of jobs";
-"-R name-default Remove the default value for the named option" = "-R name-default Remove the default value for the named option";
-"-R root-directory Set alternate root" = "-R root-directory Set alternate root";
-"-S Test with encryption using HTTPS" = "-S Test with encryption using HTTPS";
-"-S filename.strings Set strings file" = "-S filename.strings Set strings file";
-"-T seconds Set the browse timeout in seconds" = "-T seconds Set the browse timeout in seconds";
-"-T seconds Set the receive/send timeout in seconds" = "-T seconds Set the receive/send timeout in seconds";
-"-T title Specify the job title" = "-T title Specify the job title";
-"-U username Specify the username to use for authentication" = "-U username Specify the username to use for authentication";
-"-U username Specify username to use for authentication" = "-U username Specify username to use for authentication";
-"-V version Set default IPP version" = "-V version Set default IPP version";
-"-W completed Show completed jobs" = "-W completed Show completed jobs";
-"-W not-completed Show pending jobs" = "-W not-completed Show pending jobs";
-"-W {all,none,constraints,defaults,duplex,filters,profiles,sizes,translations}\n Issue warnings instead of errors" = "-W {all,none,constraints,defaults,duplex,filters,profiles,sizes,translations}\n Issue warnings instead of errors";
-"-X Produce XML plist instead of plain text" = "-X Produce XML plist instead of plain text";
-"-a Cancel all jobs" = "-a Cancel all jobs";
-"-a Show jobs on all destinations" = "-a Show jobs on all destinations";
-"-a [destination(s)] Show the accepting state of destinations" = "-a [destination(s)] Show the accepting state of destinations";
-"-a filename.conf Load printer attributes from conf file" = "-a filename.conf Load printer attributes from conf file";
-"-c Make a copy of the print file(s)" = "-c Make a copy of the print file(s)";
-"-c Produce CSV output" = "-c Produce CSV output";
-"-c [class(es)] Show classes and their member printers" = "-c [class(es)] Show classes and their member printers";
-"-c class Add the named destination to a class" = "-c class Add the named destination to a class";
-"-c command Set print command" = "-c command Set print command";
-"-c cupsd.conf Set cupsd.conf file to use." = "-c cupsd.conf Set cupsd.conf file to use.";
-"-d Show the default destination" = "-d Show the default destination";
-"-d destination Set default destination" = "-d destination Set default destination";
-"-d destination Set the named destination as the server default" = "-d destination Set the named destination as the server default";
-"-d destination Specify the destination" = "-d destination Specify the destination";
-"-d name=value Set named variable to value" = "-d name=value Set named variable to value";
-"-d regex Match domain to regular expression" = "-d regex Match domain to regular expression";
-"-d spool-directory Set spool directory" = "-d spool-directory Set spool directory";
-"-e Show available destinations on the network" = "-e Show available destinations on the network";
-"-f Run in the foreground." = "-f Run in the foreground.";
-"-f filename Set default request filename" = "-f filename Set default request filename";
-"-f type/subtype[,...] Set supported file types" = "-f type/subtype[,…] Set supported file types";
-"-h Show this usage message." = "-h Show this usage message.";
-"-h Validate HTTP response headers" = "-h Validate HTTP response headers";
-"-h regex Match hostname to regular expression" = "-h regex Match hostname to regular expression";
-"-h server[:port] Connect to the named server and port" = "-h server[:port] Connect to the named server and port";
-"-i iconfile.png[,...] Set icon file(s)" = "-i iconfile.png[,…] Set icon file(s)";
-"-i id Specify an existing job ID to modify" = "-i id Specify an existing job ID to modify";
-"-i ppd-file Specify a PPD file for the printer" = "-i ppd-file Specify a PPD file for the printer";
-"-i seconds Repeat the last file with the given time interval" = "-i seconds Repeat the last file with the given time interval";
-"-k Keep job spool files" = "-k Keep job spool files";
-"-l List attributes" = "-l List attributes";
-"-l Produce plain text output" = "-l Produce plain text output";
-"-l Run cupsd on demand." = "-l Run cupsd on demand.";
-"-l Show supported options and values" = "-l Show supported options and values";
-"-l Show verbose (long) output" = "-l Show verbose (long) output";
-"-l location Set location of printer" = "-l location Set location of printer";
-"-m Send an email notification when the job completes" = "-m Send an email notification when the job completes";
-"-m Show models" = "-m Show models";
-"-m everywhere Specify the printer is compatible with IPP Everywhere" = "-m everywhere Specify the printer is compatible with IPP Everywhere";
-"-m model Set model name (default=Printer)" = "-m model Set model name (default=Printer)";
-"-m model Specify a standard model/PPD file for the printer" = "-m model Specify a standard model/PPD file for the printer";
-"-n count Repeat the last file the given number of times" = "-n count Repeat the last file the given number of times";
-"-n hostname Set hostname for printer" = "-n hostname Set hostname for printer";
-"-n num-copies Specify the number of copies to print" = "-n num-copies Specify the number of copies to print";
-"-n regex Match service name to regular expression" = "-n regex Match service name to regular expression";
-"-o Name=Value Specify the default value for the named PPD option " = "-o Name=Value Specify the default value for the named PPD option ";
-"-o [destination(s)] Show jobs" = "-o [destination(s)] Show jobs";
-"-o cupsIPPSupplies=false\n Disable supply level reporting via IPP" = "-o cupsIPPSupplies=false\n Disable supply level reporting via IPP";
-"-o cupsSNMPSupplies=false\n Disable supply level reporting via SNMP" = "-o cupsSNMPSupplies=false\n Disable supply level reporting via SNMP";
-"-o job-k-limit=N Specify the kilobyte limit for per-user quotas" = "-o job-k-limit=N Specify the kilobyte limit for per-user quotas";
-"-o job-page-limit=N Specify the page limit for per-user quotas" = "-o job-page-limit=N Specify the page limit for per-user quotas";
-"-o job-quota-period=N Specify the per-user quota period in seconds" = "-o job-quota-period=N Specify the per-user quota period in seconds";
-"-o job-sheets=standard Print a banner page with the job" = "-o job-sheets=standard Print a banner page with the job";
-"-o media=size Specify the media size to use" = "-o media=size Specify the media size to use";
-"-o name-default=value Specify the default value for the named option" = "-o name-default=value Specify the default value for the named option";
-"-o name[=value] Set default option and value" = "-o name[=value] Set default option and value";
-"-o number-up=N Specify that input pages should be printed N-up (1, 2, 4, 6, 9, and 16 are supported)" = "-o number-up=N Specify that input pages should be printed N-up (1, 2, 4, 6, 9, and 16 are supported)";
-"-o option[=value] Specify a printer-specific option" = "-o option[=value] Specify a printer-specific option";
-"-o orientation-requested=N\n Specify portrait (3) or landscape (4) orientation" = "-o orientation-requested=N\n Specify portrait (3) or landscape (4) orientation";
-"-o print-quality=N Specify the print quality - draft (3), normal (4), or best (5)" = "-o print-quality=N Specify the print quality - draft (3), normal (4), or best (5)";
-"-o printer-error-policy=name\n Specify the printer error policy" = "-o printer-error-policy=name\n Specify the printer error policy";
-"-o printer-is-shared=true\n Share the printer" = "-o printer-is-shared=true\n Share the printer";
-"-o printer-op-policy=name\n Specify the printer operation policy" = "-o printer-op-policy=name\n Specify the printer operation policy";
-"-o sides=one-sided Specify 1-sided printing" = "-o sides=one-sided Specify 1-sided printing";
-"-o sides=two-sided-long-edge\n Specify 2-sided portrait printing" = "-o sides=two-sided-long-edge\n Specify 2-sided portrait printing";
-"-o sides=two-sided-short-edge\n Specify 2-sided landscape printing" = "-o sides=two-sided-short-edge\n Specify 2-sided landscape printing";
-"-p Print URI if true" = "-p Print URI if true";
-"-p [printer(s)] Show the processing state of destinations" = "-p [printer(s)] Show the processing state of destinations";
-"-p destination Specify a destination" = "-p destination Specify a destination";
-"-p destination Specify/add the named destination" = "-p destination Specify/add the named destination";
-"-p port Set port number for printer" = "-p port Set port number for printer";
-"-q Quietly report match via exit code" = "-q Quietly report match via exit code";
-"-q Run silently" = "-q Run silently";
-"-q Specify the job should be held for printing" = "-q Specify the job should be held for printing";
-"-q priority Specify the priority from low (1) to high (100)" = "-q priority Specify the priority from low (1) to high (100)";
-"-r Remove the file(s) after submission" = "-r Remove the file(s) after submission";
-"-r Show whether the CUPS server is running" = "-r Show whether the CUPS server is running";
-"-r True if service is remote" = "-r True if service is remote";
-"-r Use 'relaxed' open mode" = "-r Use ‘relaxed’ open mode";
-"-r class Remove the named destination from a class" = "-r class Remove the named destination from a class";
-"-r reason Specify a reason message that others can see" = "-r reason Specify a reason message that others can see";
-"-r subtype,[subtype] Set DNS-SD service subtype" = "-r subtype,[subtype] Set DNS-SD service subtype";
-"-s Be silent" = "-s Be silent";
-"-s Print service name if true" = "-s Print service name if true";
-"-s Show a status summary" = "-s Show a status summary";
-"-s cups-files.conf Set cups-files.conf file to use." = "-s cups-files.conf Set cups-files.conf file to use.";
-"-s speed[,color-speed] Set speed in pages per minute" = "-s speed[,color-speed] Set speed in pages per minute";
-"-t Produce a test report" = "-t Produce a test report";
-"-t Show all status information" = "-t Show all status information";
-"-t Test the configuration file." = "-t Test the configuration file.";
-"-t key True if the TXT record contains the key" = "-t key True if the TXT record contains the key";
-"-t title Specify the job title" = "-t title Specify the job title";
-"-u [user(s)] Show jobs queued by the current or specified users" = "-u [user(s)] Show jobs queued by the current or specified users";
-"-u allow:all Allow all users to print" = "-u allow:all Allow all users to print";
-"-u allow:list Allow the list of users or groups (@name) to print" = "-u allow:list Allow the list of users or groups (@name) to print";
-"-u deny:list Prevent the list of users or groups (@name) to print" = "-u deny:list Prevent the list of users or groups (@name) to print";
-"-u owner Specify the owner to use for jobs" = "-u owner Specify the owner to use for jobs";
-"-u regex Match URI to regular expression" = "-u regex Match URI to regular expression";
-"-v Be verbose" = "-v Be verbose";
-"-v Show devices" = "-v Show devices";
-"-v [printer(s)] Show the devices for each destination" = "-v [printer(s)] Show the devices for each destination";
-"-v device-uri Specify the device URI for the printer" = "-v device-uri Specify the device URI for the printer";
-"-vv Be very verbose" = "-vv Be very verbose";
-"-x Purge jobs rather than just canceling" = "-x Purge jobs rather than just canceling";
-"-x destination Remove default options for destination" = "-x destination Remove default options for destination";
-"-x destination Remove the named destination" = "-x destination Remove the named destination";
-"-x utility [argument ...] ;\n Execute program if true" = "-x utility [argument …] ;\n Execute program if true";
-"/etc/cups/lpoptions file names default destination that does not exist." = "/etc/cups/lpoptions file names default destination that does not exist.";
-"0" = "0";
-"1" = "1";
-"1 inch/sec." = "1 inch/sec.";
-"1.25x0.25\"" = "1.25x0.25″";
-"1.25x2.25\"" = "1.25x2.25″";
-"1.5 inch/sec." = "1.5 inch/sec.";
-"1.50x0.25\"" = "1.50x0.25″";
-"1.50x0.50\"" = "1.50x0.50″";
-"1.50x1.00\"" = "1.50x1.00″";
-"1.50x2.00\"" = "1.50x2.00″";
-"10" = "10";
-"10 inches/sec." = "10 inches/sec.";
-"10 x 11" = "10 x 11";
-"10 x 13" = "10 x 13";
-"10 x 14" = "10 x 14";
-"100" = "100";
-"100 mm/sec." = "100 mm/sec.";
-"105" = "105";
-"11" = "11";
-"11 inches/sec." = "11 inches/sec.";
-"110" = "110";
-"115" = "115";
-"12" = "12";
-"12 inches/sec." = "12 inches/sec.";
-"12 x 11" = "12 x 11";
-"120" = "120";
-"120 mm/sec." = "120 mm/sec.";
-"120x60dpi" = "120x60dpi";
-"120x72dpi" = "120x72dpi";
-"13" = "13";
-"136dpi" = "136dpi";
-"14" = "14";
-"15" = "15";
-"15 mm/sec." = "15 mm/sec.";
-"15 x 11" = "15 x 11";
-"150 mm/sec." = "150 mm/sec.";
-"150dpi" = "150dpi";
-"16" = "16";
-"17" = "17";
-"18" = "18";
-"180dpi" = "180dpi";
-"19" = "19";
-"2" = "2";
-"2 inches/sec." = "2 inches/sec.";
-"2-Sided Printing" = "2-Sided Printing";
-"2.00x0.37\"" = "2.00x0.37″";
-"2.00x0.50\"" = "2.00x0.50″";
-"2.00x1.00\"" = "2.00x1.00″";
-"2.00x1.25\"" = "2.00x1.25″";
-"2.00x2.00\"" = "2.00x2.00″";
-"2.00x3.00\"" = "2.00x3.00″";
-"2.00x4.00\"" = "2.00x4.00″";
-"2.00x5.50\"" = "2.00x5.50″";
-"2.25x0.50\"" = "2.25x0.50″";
-"2.25x1.25\"" = "2.25x1.25″";
-"2.25x4.00\"" = "2.25x4.00″";
-"2.25x5.50\"" = "2.25x5.50″";
-"2.38x5.50\"" = "2.38x5.50″";
-"2.5 inches/sec." = "2.5 inches/sec.";
-"2.50x1.00\"" = "2.50x1.00″";
-"2.50x2.00\"" = "2.50x2.00″";
-"2.75x1.25\"" = "2.75x1.25″";
-"2.9 x 1\"" = "2.9 x 1″";
-"20" = "20";
-"20 mm/sec." = "20 mm/sec.";
-"200 mm/sec." = "200 mm/sec.";
-"203dpi" = "203dpi";
-"21" = "21";
-"22" = "22";
-"23" = "23";
-"24" = "24";
-"24-Pin Series" = "24-Pin Series";
-"240x72dpi" = "240x72dpi";
-"25" = "25";
-"250 mm/sec." = "250 mm/sec.";
-"26" = "26";
-"27" = "27";
-"28" = "28";
-"29" = "29";
-"3" = "3";
-"3 inches/sec." = "3 inches/sec.";
-"3 x 5" = "3 x 5";
-"3.00x1.00\"" = "3.00x1.00″";
-"3.00x1.25\"" = "3.00x1.25″";
-"3.00x2.00\"" = "3.00x2.00″";
-"3.00x3.00\"" = "3.00x3.00″";
-"3.00x4.00\"" = "3.00x4.00″";
-"3.00x5.00\"" = "3.00x5.00″";
-"3.00x6.00\"" = "3.00x6.00″";
-"3.00x8.00\"" = "3.00x8.00″";
-"3.25x2.00\"" = "3.25x2.00″";
-"3.25x5.00\"" = "3.25x5.00″";
-"3.25x5.50\"" = "3.25x5.50″";
-"3.25x5.83\"" = "3.25x5.83″";
-"3.25x7.83\"" = "3.25x7.83″";
-"3.5 x 5" = "3.5 x 5";
-"3.5\" Disk" = "3.5″ Disk";
-"3.50x1.00\"" = "3.50x1.00″";
-"30" = "30";
-"30 mm/sec." = "30 mm/sec.";
-"300 mm/sec." = "300 mm/sec.";
-"300dpi" = "300dpi";
-"30859 Paint Can Label" = "30859 Paint Can Label";
-"35" = "35";
-"360dpi" = "360dpi";
-"360x180dpi" = "360x180dpi";
-"4" = "4";
-"4 inches/sec." = "4 inches/sec.";
-"4.00x1.00\"" = "4.00x1.00″";
-"4.00x13.00\"" = "4.00x13.00″";
-"4.00x2.00\"" = "4.00x2.00″";
-"4.00x2.50\"" = "4.00x2.50″";
-"4.00x3.00\"" = "4.00x3.00″";
-"4.00x4.00\"" = "4.00x4.00″";
-"4.00x5.00\"" = "4.00x5.00″";
-"4.00x6.00\"" = "4.00x6.00″";
-"4.00x6.50\"" = "4.00x6.50″";
-"4.00x8.00\"" = "4.00x8.00″";
-"40" = "40";
-"40 mm/sec." = "40 mm/sec.";
-"45" = "45";
-"5" = "5";
-"5 inches/sec." = "5 inches/sec.";
-"5 x 7" = "5 x 7";
-"50" = "50";
-"55" = "55";
-"6" = "6";
-"6 inches/sec." = "6 inches/sec.";
-"6.00x1.00\"" = "6.00x1.00″";
-"6.00x2.00\"" = "6.00x2.00″";
-"6.00x3.00\"" = "6.00x3.00″";
-"6.00x4.00\"" = "6.00x4.00″";
-"6.00x5.00\"" = "6.00x5.00″";
-"6.00x6.00\"" = "6.00x6.00″";
-"6.00x6.50\"" = "6.00x6.50″";
-"6.00x8.00\"" = "6.00x8.00″";
-"60" = "60";
-"60 mm/sec." = "60 mm/sec.";
-"600dpi" = "600dpi";
-"60dpi" = "60dpi";
-"60x72dpi" = "60x72dpi";
-"65" = "65";
-"7" = "7";
-"7 inches/sec." = "7 inches/sec.";
-"7 x 9" = "7 x 9";
-"70" = "70";
-"75" = "75";
-"8" = "8";
-"8 inches/sec." = "8 inches/sec.";
-"8 x 10" = "8 x 10";
-"8.00x1.00\"" = "8.00x1.00″";
-"8.00x2.00\"" = "8.00x2.00″";
-"8.00x3.00\"" = "8.00x3.00″";
-"8.00x4.00\"" = "8.00x4.00″";
-"8.00x5.00\"" = "8.00x5.00″";
-"8.00x6.00\"" = "8.00x6.00″";
-"8.00x6.50\"" = "8.00x6.50″";
-"8.26x1.00\"" = "8.26x1.00″";
-"80" = "80";
-"80 mm/sec." = "80 mm/sec.";
-"80x50mm" = "80x50mm";
-"85" = "85";
-"9" = "9";
-"9 inches/sec." = "9 inches/sec.";
-"9 x 11" = "9 x 11";
-"9 x 12" = "9 x 12";
-"9-Pin Series" = "9-Pin Series";
-"90" = "90";
-"95" = "95";
-"?Invalid help command unknown." = "?Invalid help command unknown.";
-"A class named \"%s\" already exists." = "A class named “%s” already exists.";
-"A printer named \"%s\" already exists." = "A printer named “%s” already exists.";
-"A0" = "A0";
-"A0 Long Edge" = "A0 Long Edge";
-"A1" = "A1";
-"A1 Long Edge" = "A1 Long Edge";
-"A10" = "A10";
-"A2" = "A2";
-"A2 Long Edge" = "A2 Long Edge";
-"A3" = "A3";
-"A3 Long Edge" = "A3 Long Edge";
-"A3 Oversize" = "A3 Oversize";
-"A3 Oversize Long Edge" = "A3 Oversize Long Edge";
-"A4" = "A4";
-"A4 Long Edge" = "A4 Long Edge";
-"A4 Oversize" = "A4 Oversize";
-"A4 Small" = "A4 Small";
-"A5" = "A5";
-"A5 Long Edge" = "A5 Long Edge";
-"A5 Oversize" = "A5 Oversize";
-"A6" = "A6";
-"A6 Long Edge" = "A6 Long Edge";
-"A7" = "A7";
-"A8" = "A8";
-"A9" = "A9";
-"ANSI A" = "ANSI A";
-"ANSI B" = "ANSI B";
-"ANSI C" = "ANSI C";
-"ANSI D" = "ANSI D";
-"ANSI E" = "ANSI E";
-"ARCH C" = "ARCH C";
-"ARCH C Long Edge" = "ARCH C Long Edge";
-"ARCH D" = "ARCH D";
-"ARCH D Long Edge" = "ARCH D Long Edge";
-"ARCH E" = "ARCH E";
-"ARCH E Long Edge" = "ARCH E Long Edge";
-"Accept Jobs" = "Accept Jobs";
-"Accepted" = "Accepted";
-"Add Class" = "Add Class";
-"Add Printer" = "Add Printer";
-"Address" = "Address";
-"Administration" = "Administration";
-"Always" = "Always";
-"AppSocket/HP JetDirect" = "AppSocket/HP JetDirect";
-"Applicator" = "Applicator";
-"Attempt to set %s printer-state to bad value %d." = "Attempt to set %s printer-state to bad value %d.";
-"Attribute \"%s\" has empty value." = "Attribute “%s” has empty value.";
-"Attribute \"%s\" is in the wrong group." = "Attribute “%s” is in the wrong group.";
-"Attribute \"%s\" is the wrong value type." = "Attribute “%s” is the wrong value type.";
-"Attribute groups are out of order (%x < %x)." = "Attribute groups are out of order (%x < %x).";
-"B0" = "B0";
-"B1" = "B1";
-"B10" = "B10";
-"B2" = "B2";
-"B3" = "B3";
-"B4" = "B4";
-"B5" = "B5";
-"B5 Oversize" = "B5 Oversize";
-"B6" = "B6";
-"B7" = "B7";
-"B8" = "B8";
-"B9" = "B9";
-"Bad \"printer-id\" value %d." = "Bad “printer-id” value %d.";
-"Bad '%s' value." = "Bad ‘%s’ value.";
-"Bad 'document-format' value \"%s\"." = "Bad ‘document-format’ value “%s”.";
-"Bad CloseUI/JCLCloseUI" = "Bad CloseUI/JCLCloseUI";
-"Bad NULL dests pointer" = "Bad NULL dests pointer";
-"Bad OpenGroup" = "Bad OpenGroup";
-"Bad OpenUI/JCLOpenUI" = "Bad OpenUI/JCLOpenUI";
-"Bad OrderDependency" = "Bad OrderDependency";
-"Bad PPD cache file." = "Bad PPD cache file.";
-"Bad PPD file." = "Bad PPD file.";
-"Bad Request" = "Bad Request";
-"Bad SNMP version number" = "Bad SNMP version number";
-"Bad UIConstraints" = "Bad UIConstraints";
-"Bad URI." = "Bad URI.";
-"Bad arguments to function" = "Bad arguments to function";
-"Bad copies value %d." = "Bad copies value %d.";
-"Bad custom parameter" = "Bad custom parameter";
-"Bad device URI \"%s\"." = "Bad device URI “%s”.";
-"Bad device-uri \"%s\"." = "Bad device-uri “%s”.";
-"Bad device-uri scheme \"%s\"." = "Bad device-uri scheme “%s”.";
-"Bad document-format \"%s\"." = "Bad document-format “%s”.";
-"Bad document-format-default \"%s\"." = "Bad document-format-default “%s”.";
-"Bad extKeyUsage extension in X.509 certificate request." = "Bad extKeyUsage extension in X.509 certificate request.";
-"Bad filename buffer" = "Bad filename buffer";
-"Bad hostname/address in URI" = "Bad hostname/address in URI";
-"Bad job-name value: %s" = "Bad job-name value: %s";
-"Bad job-name value: Wrong type or count." = "Bad job-name value: Wrong type or count.";
-"Bad job-priority value." = "Bad job-priority value.";
-"Bad job-sheets value \"%s\"." = "Bad job-sheets value “%s”.";
-"Bad job-sheets value type." = "Bad job-sheets value type.";
-"Bad job-state value." = "Bad job-state value.";
-"Bad job-uri \"%s\"." = "Bad job-uri “%s”.";
-"Bad keyUsage extension in X.509 certificate request." = "Bad keyUsage extension in X.509 certificate request.";
-"Bad notify-pull-method \"%s\"." = "Bad notify-pull-method “%s”.";
-"Bad notify-recipient-uri \"%s\"." = "Bad notify-recipient-uri “%s”.";
-"Bad notify-user-data \"%s\"." = "Bad notify-user-data “%s”.";
-"Bad number-up value %d." = "Bad number-up value %d.";
-"Bad page-ranges values %d-%d." = "Bad page-ranges values %d-%d.";
-"Bad port number in URI" = "Bad port number in URI";
-"Bad port-monitor \"%s\"." = "Bad port-monitor “%s”.";
-"Bad printer-state value %d." = "Bad printer-state value %d.";
-"Bad printer-uri." = "Bad printer-uri.";
-"Bad request ID %d." = "Bad request ID %d.";
-"Bad request version number %d.%d." = "Bad request version number %d.%d.";
-"Bad resource in URI" = "Bad resource in URI";
-"Bad scheme in URI" = "Bad scheme in URI";
-"Bad subjectAltName extension in X.509 certificate request." = "Bad subjectAltName extension in X.509 certificate request.";
-"Bad username in URI" = "Bad username in URI";
-"Bad value string" = "Bad value string";
-"Bad/empty URI" = "Bad/empty URI";
-"Banners" = "Banners";
-"Bond Paper" = "Bond Paper";
-"Boolean expected for waiteof option \"%s\"." = "Boolean expected for waiteof option “%s”.";
-"Buffer overflow detected, aborting." = "Buffer overflow detected, aborting.";
-"CMYK" = "CMYK";
-"CPCL Label Printer" = "CPCL Label Printer";
-"Cancel Jobs" = "Cancel Jobs";
-"Canceling print job." = "Canceling print job.";
-"Cannot change printer-is-shared for remote queues." = "Cannot change printer-is-shared for remote queues.";
-"Cannot share a remote Kerberized printer." = "Cannot share a remote Kerberized printer.";
-"Cassette" = "Cassette";
-"Change Settings" = "Change Settings";
-"Character set \"%s\" not supported." = "Character set “%s” not supported.";
-"Classes" = "Classes";
-"Clean Print Heads" = "Clean Print Heads";
-"Close-Job doesn't support the job-uri attribute." = "Close-Job doesn’t support the job-uri attribute.";
-"Color" = "Color";
-"Color Mode" = "Color Mode";
-"Commands may be abbreviated. Commands are:\n\nexit help quit status ?" = "Commands may be abbreviated. Commands are:\n\nexit help quit status ?";
-"Community name uses indefinite length" = "Community name uses indefinite length";
-"Connected to printer." = "Connected to printer.";
-"Connecting to printer." = "Connecting to printer.";
-"Continue" = "Continue";
-"Continuous" = "Continuous";
-"Control file sent successfully." = "Control file sent successfully.";
-"Copying print data." = "Copying print data.";
-"Couldn't resolve mDNS URI \"%s\"." = "Couldn’t resolve mDNS URI “%s”.";
-"Created" = "Created";
-"Credentials are not CA-signed." = "Credentials are not CA-signed.";
-"Credentials do not validate against site CA certificate." = "Credentials do not validate against site CA certificate.";
-"Credentials have expired." = "Credentials have expired.";
-"Custom" = "Custom";
-"CustominCutInterval" = "CustominCutInterval";
-"CustominTearInterval" = "CustominTearInterval";
-"Cut" = "Cut";
-"Cutter" = "Cutter";
-"DYMO" = "DYMO";
-"Dark" = "Dark";
-"Darkness" = "Darkness";
-"Data file sent successfully." = "Data file sent successfully.";
-"Deep Color" = "Deep Color";
-"Deep Gray" = "Deep Gray";
-"Delete Class" = "Delete Class";
-"Delete Printer" = "Delete Printer";
-"DeskJet Series" = "DeskJet Series";
-"Destination \"%s\" is not accepting jobs." = "Destination “%s” is not accepting jobs.";
-"Device CMYK" = "Device CMYK";
-"Device Gray" = "Device Gray";
-"Device RGB" = "Device RGB";
-"Device: uri = %s\n class = %s\n info = %s\n make-and-model = %s\n device-id = %s\n location = %s" = "Device: uri = %s\n class = %s\n info = %s\n make-and-model = %s\n device-id = %s\n location = %s";
-"Direct Thermal Media" = "Direct Thermal Media";
-"Directory \"%s\" contains a relative path." = "Directory “%s” contains a relative path.";
-"Directory \"%s\" has insecure permissions (0%o/uid=%d/gid=%d)." = "Directory “%s” has insecure permissions (0%o/uid=%d/gid=%d).";
-"Directory \"%s\" is a file." = "Directory “%s” is a file.";
-"Directory \"%s\" not available: %s" = "Directory “%s” not available: %s";
-"Directory \"%s\" permissions OK (0%o/uid=%d/gid=%d)." = "Directory “%s” permissions OK (0%o/uid=%d/gid=%d).";
-"Disabled" = "Disabled";
-"Document #%d does not exist in job #%d." = "Document #%d does not exist in job #%d.";
-"Duplexer" = "Duplexer";
-"EPL1 Label Printer" = "EPL1 Label Printer";
-"EPL2 Label Printer" = "EPL2 Label Printer";
-"Edit Configuration File" = "Edit Configuration File";
-"Encryption is not supported." = "Encryption is not supported.";
-// TRANSLATORS: Banner/cover sheet after the print job.
-"Ending Banner" = "Ending Banner";
-"English" = "English";
-"Enter your username and password or the root username and password to access this page. If you are using Kerberos authentication, make sure you have a valid Kerberos ticket." = "Enter your username and password or the root username and password to access this page. If you are using Kerberos authentication, make sure you have a valid Kerberos ticket.";
-"Envelope #10" = "Envelope #10";
-"Envelope #11" = "Envelope #11";
-"Envelope #12" = "Envelope #12";
-"Envelope #14" = "Envelope #14";
-"Envelope #9" = "Envelope #9";
-"Envelope B4" = "Envelope B4";
-"Envelope B5" = "Envelope B5";
-"Envelope B6" = "Envelope B6";
-"Envelope C0" = "Envelope C0";
-"Envelope C1" = "Envelope C1";
-"Envelope C2" = "Envelope C2";
-"Envelope C3" = "Envelope C3";
-"Envelope C4" = "Envelope C4";
-"Envelope C5" = "Envelope C5";
-"Envelope C6" = "Envelope C6";
-"Envelope C65" = "Envelope C65";
-"Envelope C7" = "Envelope C7";
-"Envelope Choukei 3" = "Envelope Choukei 3";
-"Envelope Choukei 3 Long Edge" = "Envelope Choukei 3 Long Edge";
-"Envelope Choukei 4" = "Envelope Choukei 4";
-"Envelope Choukei 4 Long Edge" = "Envelope Choukei 4 Long Edge";
-"Envelope DL" = "Envelope DL";
-"Envelope Feed" = "Envelope Feed";
-"Envelope Invite" = "Envelope Invite";
-"Envelope Italian" = "Envelope Italian";
-"Envelope Kaku2" = "Envelope Kaku2";
-"Envelope Kaku2 Long Edge" = "Envelope Kaku2 Long Edge";
-"Envelope Kaku3" = "Envelope Kaku3";
-"Envelope Kaku3 Long Edge" = "Envelope Kaku3 Long Edge";
-"Envelope Monarch" = "Envelope Monarch";
-"Envelope PRC1" = "Envelope PRC1";
-"Envelope PRC1 Long Edge" = "Envelope PRC1 Long Edge";
-"Envelope PRC10" = "Envelope PRC10";
-"Envelope PRC10 Long Edge" = "Envelope PRC10 Long Edge";
-"Envelope PRC2" = "Envelope PRC2";
-"Envelope PRC2 Long Edge" = "Envelope PRC2 Long Edge";
-"Envelope PRC3" = "Envelope PRC3";
-"Envelope PRC3 Long Edge" = "Envelope PRC3 Long Edge";
-"Envelope PRC4" = "Envelope PRC4";
-"Envelope PRC4 Long Edge" = "Envelope PRC4 Long Edge";
-"Envelope PRC5 Long Edge" = "Envelope PRC5 Long Edge";
-"Envelope PRC5PRC5" = "Envelope PRC5PRC5";
-"Envelope PRC6" = "Envelope PRC6";
-"Envelope PRC6 Long Edge" = "Envelope PRC6 Long Edge";
-"Envelope PRC7" = "Envelope PRC7";
-"Envelope PRC7 Long Edge" = "Envelope PRC7 Long Edge";
-"Envelope PRC8" = "Envelope PRC8";
-"Envelope PRC8 Long Edge" = "Envelope PRC8 Long Edge";
-"Envelope PRC9" = "Envelope PRC9";
-"Envelope PRC9 Long Edge" = "Envelope PRC9 Long Edge";
-"Envelope Personal" = "Envelope Personal";
-"Envelope You4" = "Envelope You4";
-"Envelope You4 Long Edge" = "Envelope You4 Long Edge";
-"Environment Variables:" = "Environment Variables:";
-"Epson" = "Epson";
-"Error Policy" = "Error Policy";
-"Error reading raster data." = "Error reading raster data.";
-"Error sending raster data." = "Error sending raster data.";
-"Error: need hostname after \"-h\" option." = "Error: need hostname after “-h” option.";
-"European Fanfold" = "European Fanfold";
-"European Fanfold Legal" = "European Fanfold Legal";
-"Every 10 Labels" = "Every 10 Labels";
-"Every 2 Labels" = "Every 2 Labels";
-"Every 3 Labels" = "Every 3 Labels";
-"Every 4 Labels" = "Every 4 Labels";
-"Every 5 Labels" = "Every 5 Labels";
-"Every 6 Labels" = "Every 6 Labels";
-"Every 7 Labels" = "Every 7 Labels";
-"Every 8 Labels" = "Every 8 Labels";
-"Every 9 Labels" = "Every 9 Labels";
-"Every Label" = "Every Label";
-"Executive" = "Executive";
-"Expectation Failed" = "Expectation Failed";
-"Expressions:" = "Expressions:";
-"Fast Grayscale" = "Fast Grayscale";
-"File \"%s\" contains a relative path." = "File “%s” contains a relative path.";
-"File \"%s\" has insecure permissions (0%o/uid=%d/gid=%d)." = "File “%s” has insecure permissions (0%o/uid=%d/gid=%d).";
-"File \"%s\" is a directory." = "File “%s” is a directory.";
-"File \"%s\" not available: %s" = "File “%s” not available: %s";
-"File \"%s\" permissions OK (0%o/uid=%d/gid=%d)." = "File “%s” permissions OK (0%o/uid=%d/gid=%d).";
-"File Folder" = "File Folder";
-"File device URIs have been disabled. To enable, see the FileDevice directive in \"%s/cups-files.conf\"." = "File device URIs have been disabled. To enable, see the FileDevice directive in “%s/cups-files.conf”.";
-"Finished page %d." = "Finished page %d.";
-"Folio" = "Folio";
-"Forbidden" = "Forbidden";
-"Form data too large." = "Form data too large.";
-"Found" = "Found";
-"General" = "General";
-"Generic" = "Generic";
-"Get-Response-PDU uses indefinite length" = "Get-Response-PDU uses indefinite length";
-"Glossy Paper" = "Glossy Paper";
-"Got a printer-uri attribute but no job-id." = "Got a printer-uri attribute but no job-id.";
-"GrayScale" = "GrayScale";
-"Grayscale" = "Grayscale";
-"HP" = "HP";
-"Hanging Folder" = "Hanging Folder";
-"Hash buffer too small." = "Hash buffer too small.";
-"Help file not in index." = "Help file not in index.";
-"IP address is not allowed as hostname when using Negotiate - use FQDN." = "IP address is not allowed as hostname when using Negotiate - use FQDN.";
-"IPP 1setOf attribute with incompatible value tags." = "IPP 1setOf attribute with incompatible value tags.";
-"IPP Everywhere driver requires an IPP connection." = "IPP Everywhere driver requires an IPP connection.";
-"IPP attribute has no name." = "IPP attribute has no name.";
-"IPP attribute is not a member of the message." = "IPP attribute is not a member of the message.";
-"IPP begCollection value not 0 bytes." = "IPP begCollection value not 0 bytes.";
-"IPP boolean value not 1 byte." = "IPP boolean value not 1 byte.";
-"IPP date value not 11 bytes." = "IPP date value not 11 bytes.";
-"IPP endCollection value not 0 bytes." = "IPP endCollection value not 0 bytes.";
-"IPP enum value not 4 bytes." = "IPP enum value not 4 bytes.";
-"IPP integer value not 4 bytes." = "IPP integer value not 4 bytes.";
-"IPP language length overflows value." = "IPP language length overflows value.";
-"IPP language length too large." = "IPP language length too large.";
-"IPP member attribute outside of collection." = "IPP member attribute outside of collection.";
-"IPP member name is not empty." = "IPP member name is not empty.";
-"IPP memberName value is empty." = "IPP memberName value is empty.";
-"IPP memberName with no attribute." = "IPP memberName with no attribute.";
-"IPP name larger than 32767 bytes." = "IPP name larger than 32767 bytes.";
-"IPP nameWithLanguage value less than minimum 4 bytes." = "IPP nameWithLanguage value less than minimum 4 bytes.";
-"IPP octetString length too large." = "IPP octetString length too large.";
-"IPP rangeOfInteger value not 8 bytes." = "IPP rangeOfInteger value not 8 bytes.";
-"IPP resolution value not 9 bytes." = "IPP resolution value not 9 bytes.";
-"IPP string length overflows value." = "IPP string length overflows value.";
-"IPP textWithLanguage value less than minimum 4 bytes." = "IPP textWithLanguage value less than minimum 4 bytes.";
-"IPP value larger than 32767 bytes." = "IPP value larger than 32767 bytes.";
-"IPPFIND_SERVICE_DOMAIN Domain name" = "IPPFIND_SERVICE_DOMAIN Domain name";
-"IPPFIND_SERVICE_HOSTNAME\n Fully-qualified domain name" = "IPPFIND_SERVICE_HOSTNAME\n Fully-qualified domain name";
-"IPPFIND_SERVICE_NAME Service instance name" = "IPPFIND_SERVICE_NAME Service instance name";
-"IPPFIND_SERVICE_PORT Port number" = "IPPFIND_SERVICE_PORT Port number";
-"IPPFIND_SERVICE_REGTYPE DNS-SD registration type" = "IPPFIND_SERVICE_REGTYPE DNS-SD registration type";
-"IPPFIND_SERVICE_SCHEME URI scheme" = "IPPFIND_SERVICE_SCHEME URI scheme";
-"IPPFIND_SERVICE_URI URI" = "IPPFIND_SERVICE_URI URI";
-"IPPFIND_TXT_* Value of TXT record key" = "IPPFIND_TXT_* Value of TXT record key";
-"ISOLatin1" = "ISOLatin1";
-"Illegal control character" = "Illegal control character";
-"Illegal main keyword string" = "Illegal main keyword string";
-"Illegal option keyword string" = "Illegal option keyword string";
-"Illegal translation string" = "Illegal translation string";
-"Illegal whitespace character" = "Illegal whitespace character";
-"Installable Options" = "Installable Options";
-"Installed" = "Installed";
-"IntelliBar Label Printer" = "IntelliBar Label Printer";
-"Intellitech" = "Intellitech";
-"Internal Server Error" = "Internal Server Error";
-"Internal error" = "Internal error";
-"Internet Postage 2-Part" = "Internet Postage 2-Part";
-"Internet Postage 3-Part" = "Internet Postage 3-Part";
-"Internet Printing Protocol" = "Internet Printing Protocol";
-"Invalid JSON data." = "Invalid JSON data.";
-"Invalid JSON web token." = "Invalid JSON web token.";
-"Invalid form data." = "Invalid form data.";
-"Invalid group tag." = "Invalid group tag.";
-"Invalid media name arguments." = "Invalid media name arguments.";
-"Invalid media size." = "Invalid media size.";
-"Invalid named IPP attribute in collection." = "Invalid named IPP attribute in collection.";
-"Invalid ppd-name value." = "Invalid ppd-name value.";
-"Invalid printer command \"%s\"." = "Invalid printer command “%s”.";
-"JCL" = "JCL";
-"JIS B0" = "JIS B0";
-"JIS B1" = "JIS B1";
-"JIS B10" = "JIS B10";
-"JIS B2" = "JIS B2";
-"JIS B3" = "JIS B3";
-"JIS B4" = "JIS B4";
-"JIS B4 Long Edge" = "JIS B4 Long Edge";
-"JIS B5" = "JIS B5";
-"JIS B5 Long Edge" = "JIS B5 Long Edge";
-"JIS B6" = "JIS B6";
-"JIS B6 Long Edge" = "JIS B6 Long Edge";
-"JIS B7" = "JIS B7";
-"JIS B8" = "JIS B8";
-"JIS B9" = "JIS B9";
-"JSON file too large." = "JSON file too large.";
-"Job #%d cannot be restarted - no files." = "Job #%d cannot be restarted - no files.";
-"Job #%d does not exist." = "Job #%d does not exist.";
-"Job #%d is already aborted - can't cancel." = "Job #%d is already aborted - can’t cancel.";
-"Job #%d is already canceled - can't cancel." = "Job #%d is already canceled - can’t cancel.";
-"Job #%d is already completed - can't cancel." = "Job #%d is already completed - can’t cancel.";
-"Job #%d is finished and cannot be altered." = "Job #%d is finished and cannot be altered.";
-"Job #%d is not complete." = "Job #%d is not complete.";
-"Job #%d is not held for authentication." = "Job #%d is not held for authentication.";
-"Job #%d is not held." = "Job #%d is not held.";
-"Job Completed" = "Job Completed";
-"Job Created" = "Job Created";
-"Job Options Changed" = "Job Options Changed";
-"Job Stopped" = "Job Stopped";
-"Job is completed and cannot be changed." = "Job is completed and cannot be changed.";
-"Job operation failed" = "Job operation failed";
-"Job state cannot be changed." = "Job state cannot be changed.";
-"Job subscriptions cannot be renewed." = "Job subscriptions cannot be renewed.";
-"Jobs" = "Jobs";
-"LPD/LPR Host or Printer" = "LPD/LPR Host or Printer";
-"LPDEST environment variable names default destination that does not exist." = "LPDEST environment variable names default destination that does not exist.";
-"Label Printer" = "Label Printer";
-"Label Top" = "Label Top";
-"Language \"%s\" not supported." = "Language “%s” not supported.";
-"Large Address" = "Large Address";
-"LaserJet Series PCL 4/5" = "LaserJet Series PCL 4/5";
-"Letter Oversize" = "Letter Oversize";
-"Letter Oversize Long Edge" = "Letter Oversize Long Edge";
-"Light" = "Light";
-"Line longer than the maximum allowed (255 characters)" = "Line longer than the maximum allowed (255 characters)";
-"List Available Printers" = "List Available Printers";
-"Listening on port %d." = "Listening on port %d.";
-"Local printer created." = "Local printer created.";
-"Long-Edge (Portrait)" = "Long-Edge (Portrait)";
-"Main Roll" = "Main Roll";
-"Manual Feed" = "Manual Feed";
-"Media Size" = "Media Size";
-"Media Source" = "Media Source";
-"Media Tracking" = "Media Tracking";
-"Media Type" = "Media Type";
-"Medium" = "Medium";
-"Memory allocation error" = "Memory allocation error";
-"Missing CloseGroup" = "Missing CloseGroup";
-"Missing CloseUI/JCLCloseUI" = "Missing CloseUI/JCLCloseUI";
-"Missing PPD-Adobe-4.x header" = "Missing PPD-Adobe-4.x header";
-"Missing asterisk in column 1" = "Missing asterisk in column 1";
-"Missing document-number attribute." = "Missing document-number attribute.";
-"Missing form variable" = "Missing form variable";
-"Missing last-document attribute in request." = "Missing last-document attribute in request.";
-"Missing media or media-col." = "Missing media or media-col.";
-"Missing media-size in media-col." = "Missing media-size in media-col.";
-"Missing notify-subscription-ids attribute." = "Missing notify-subscription-ids attribute.";
-"Missing option keyword" = "Missing option keyword";
-"Missing requesting-user-name attribute." = "Missing requesting-user-name attribute.";
-"Missing required attribute \"%s\"." = "Missing required attribute “%s”.";
-"Missing required attributes." = "Missing required attributes.";
-"Missing resource in URI" = "Missing resource in URI";
-"Missing scheme in URI" = "Missing scheme in URI";
-"Missing value string" = "Missing value string";
-"Missing x-dimension in media-size." = "Missing x-dimension in media-size.";
-"Missing y-dimension in media-size." = "Missing y-dimension in media-size.";
-"Model: name = %s\n natural_language = %s\n make-and-model = %s\n device-id = %s" = "Model: name = %s\n natural_language = %s\n make-and-model = %s\n device-id = %s";
-"Modifiers:" = "Modifiers:";
-"Modify Class" = "Modify Class";
-"Modify Printer" = "Modify Printer";
-"Move All Jobs" = "Move All Jobs";
-"Move Job" = "Move Job";
-"Moved Permanently" = "Moved Permanently";
-"NULL PPD file pointer" = "NULL PPD file pointer";
-"Name OID uses indefinite length" = "Name OID uses indefinite length";
-"Nested classes are not allowed." = "Nested classes are not allowed.";
-"Never" = "Never";
-"New credentials are not valid for name." = "New credentials are not valid for name.";
-"New credentials are older than stored credentials." = "New credentials are older than stored credentials.";
-"No" = "No";
-"No Content" = "No Content";
-"No IPP attributes." = "No IPP attributes.";
-"No PPD name" = "No PPD name";
-"No VarBind SEQUENCE" = "No VarBind SEQUENCE";
-"No active connection" = "No active connection";
-"No active connection." = "No active connection.";
-"No active jobs on %s." = "No active jobs on %s.";
-"No attributes in request." = "No attributes in request.";
-"No authentication information provided." = "No authentication information provided.";
-"No community name" = "No community name";
-"No default destination." = "No default destination.";
-"No default printer." = "No default printer.";
-"No destinations added." = "No destinations added.";
-"No device URI found in argv[0] or in DEVICE_URI environment variable." = "No device URI found in argv[0] or in DEVICE_URI environment variable.";
-"No error-index" = "No error-index";
-"No error-status" = "No error-status";
-"No file in print request." = "No file in print request.";
-"No modification time" = "No modification time";
-"No name OID" = "No name OID";
-"No pages were found." = "No pages were found.";
-"No printer name" = "No printer name";
-"No printer-uri found" = "No printer-uri found";
-"No printer-uri found for class" = "No printer-uri found for class";
-"No printer-uri in request." = "No printer-uri in request.";
-"No printer-uri-supported attribute." = "No printer-uri-supported attribute.";
-"No request URI." = "No request URI.";
-"No request protocol version." = "No request protocol version.";
-"No request sent." = "No request sent.";
-"No request-id" = "No request-id";
-"No stored credentials, not valid for name." = "No stored credentials, not valid for name.";
-"No subscription attributes in request." = "No subscription attributes in request.";
-"No subscriptions found." = "No subscriptions found.";
-"No variable-bindings SEQUENCE" = "No variable-bindings SEQUENCE";
-"No version number" = "No version number";
-"Non-continuous (Mark sensing)" = "Non-continuous (Mark sensing)";
-"Non-continuous (Web sensing)" = "Non-continuous (Web sensing)";
-"Normal" = "Normal";
-"Not Found" = "Not Found";
-"Not Implemented" = "Not Implemented";
-"Not Installed" = "Not Installed";
-"Not Modified" = "Not Modified";
-"Not Supported" = "Not Supported";
-"Not allowed to print." = "Not allowed to print.";
-"Note" = "Note";
-"OK" = "OK";
-"Off (1-Sided)" = "Off (1-Sided)";
-"Oki" = "Oki";
-"Online Help" = "Online Help";
-"Only WGS-84 coordinates are supported." = "Only WGS-84 coordinates are supported.";
-"Only local users can create a local printer." = "Only local users can create a local printer.";
-"Open of %s failed: %s" = "Open of %s failed: %s";
-"OpenGroup without a CloseGroup first" = "OpenGroup without a CloseGroup first";
-"OpenUI/JCLOpenUI without a CloseUI/JCLCloseUI first" = "OpenUI/JCLOpenUI without a CloseUI/JCLCloseUI first";
-"Operation Policy" = "Operation Policy";
-"Option \"%s\" cannot be included via %%%%IncludeFeature." = "Option “%s” cannot be included via %%%%IncludeFeature.";
-"Options Installed" = "Options Installed";
-"Options:" = "Options:";
-"Other Media" = "Other Media";
-"Other Tray" = "Other Tray";
-"Out of date PPD cache file." = "Out of date PPD cache file.";
-"Out of memory." = "Out of memory.";
-"Output Mode" = "Output Mode";
-"PCL Laser Printer" = "PCL Laser Printer";
-"PRC16K" = "PRC16K";
-"PRC16K Long Edge" = "PRC16K Long Edge";
-"PRC32K" = "PRC32K";
-"PRC32K Long Edge" = "PRC32K Long Edge";
-"PRC32K Oversize" = "PRC32K Oversize";
-"PRC32K Oversize Long Edge" = "PRC32K Oversize Long Edge";
-"PRINTER environment variable names default destination that does not exist." = "PRINTER environment variable names default destination that does not exist.";
-"Packet does not contain a Get-Response-PDU" = "Packet does not contain a Get-Response-PDU";
-"Packet does not start with SEQUENCE" = "Packet does not start with SEQUENCE";
-"ParamCustominCutInterval" = "ParamCustominCutInterval";
-"ParamCustominTearInterval" = "ParamCustominTearInterval";
-"Password for %s on %s? " = "Password for %s on %s? ";
-"Pause Class" = "Pause Class";
-"Pause Printer" = "Pause Printer";
-"Peel-Off" = "Peel-Off";
-"Photo" = "Photo";
-"Photo Labels" = "Photo Labels";
-"Plain Paper" = "Plain Paper";
-"Policies" = "Policies";
-"Port Monitor" = "Port Monitor";
-"PostScript Printer" = "PostScript Printer";
-"Postcard" = "Postcard";
-"Postcard Double" = "Postcard Double";
-"Postcard Double Long Edge" = "Postcard Double Long Edge";
-"Postcard Long Edge" = "Postcard Long Edge";
-"Preparing to print." = "Preparing to print.";
-"Print Density" = "Print Density";
-"Print Job:" = "Print Job:";
-"Print Mode" = "Print Mode";
-"Print Rate" = "Print Rate";
-"Print Self-Test Page" = "Print Self-Test Page";
-"Print Speed" = "Print Speed";
-"Print Test Page" = "Print Test Page";
-"Print and Cut" = "Print and Cut";
-"Print and Tear" = "Print and Tear";
-"Print file sent." = "Print file sent.";
-"Print job canceled at printer." = "Print job canceled at printer.";
-"Print job too large." = "Print job too large.";
-"Print job was not accepted." = "Print job was not accepted.";
-"Printer \"%s\" already exists." = "Printer “%s” already exists.";
-"Printer Added" = "Printer Added";
-"Printer Default" = "Printer Default";
-"Printer Deleted" = "Printer Deleted";
-"Printer Modified" = "Printer Modified";
-"Printer Paused" = "Printer Paused";
-"Printer Settings" = "Printer Settings";
-"Printer cannot print supplied content." = "Printer cannot print supplied content.";
-"Printer cannot print with supplied options." = "Printer cannot print with supplied options.";
-"Printer does not support required IPP attributes or document formats." = "Printer does not support required IPP attributes or document formats.";
-"Printer:" = "Printer:";
-"Printers" = "Printers";
-"Printing page %d, %u%% complete." = "Printing page %d, %u%% complete.";
-"Quarto" = "Quarto";
-"Quota limit reached." = "Quota limit reached.";
-"Rank Owner Job File(s) Total Size" = "Rank Owner Job File(s) Total Size";
-"Reject Jobs" = "Reject Jobs";
-"Remote host did not accept control file (%d)." = "Remote host did not accept control file (%d).";
-"Remote host did not accept data file (%d)." = "Remote host did not accept data file (%d).";
-"Reprint After Error" = "Reprint After Error";
-"Request Entity Too Large" = "Request Entity Too Large";
-"Resolution" = "Resolution";
-"Resume Class" = "Resume Class";
-"Resume Printer" = "Resume Printer";
-"Return Address" = "Return Address";
-"Rewind" = "Rewind";
-"SEQUENCE uses indefinite length" = "SEQUENCE uses indefinite length";
-"SSL/TLS Negotiation Error" = "SSL/TLS Negotiation Error";
-"Second Roll (DUO/Twin Only)" = "Second Roll (DUO/Twin Only)";
-"See Other" = "See Other";
-"See remote printer." = "See remote printer.";
-"Self-signed credentials are blocked." = "Self-signed credentials are blocked.";
-"Sending data to printer." = "Sending data to printer.";
-"Server Restarted" = "Server Restarted";
-"Server Security Auditing" = "Server Security Auditing";
-"Server Started" = "Server Started";
-"Server Stopped" = "Server Stopped";
-"Server credentials not set." = "Server credentials not set.";
-"Service Unavailable" = "Service Unavailable";
-"Set Allowed Users" = "Set Allowed Users";
-"Set As Server Default" = "Set As Server Default";
-"Set Class Options" = "Set Class Options";
-"Set Printer Options" = "Set Printer Options";
-"Shipping Address" = "Shipping Address";
-"Short-Edge (Landscape)" = "Short-Edge (Landscape)";
-"Special Paper" = "Special Paper";
-"Spooling job, %.0f%% complete." = "Spooling job, %.0f%% complete.";
-"Standard" = "Standard";
-// TRANSLATORS: Banner/cover sheet before the print job.
-"Starting Banner" = "Starting Banner";
-"Starting page %d." = "Starting page %d.";
-"Statement" = "Statement";
-"Subscription #%d does not exist." = "Subscription #%d does not exist.";
-"Substitutions:" = "Substitutions:";
-"Super A" = "Super A";
-"Super B" = "Super B";
-"Super B/A3" = "Super B/A3";
-"Switching Protocols" = "Switching Protocols";
-"Tabloid" = "Tabloid";
-"Tabloid Oversize" = "Tabloid Oversize";
-"Tabloid Oversize Long Edge" = "Tabloid Oversize Long Edge";
-"Tear" = "Tear";
-"Tear-Off" = "Tear-Off";
-"Tear-Off Adjust Position" = "Tear-Off Adjust Position";
-"The \"%s\" attribute is required for print jobs." = "The “%s” attribute is required for print jobs.";
-"The %s attribute cannot be provided with job-ids." = "The %s attribute cannot be provided with job-ids.";
-"The '%s' Job Status attribute cannot be supplied in a job creation request." = "The ‘%s’ Job Status attribute cannot be supplied in a job creation request.";
-"The '%s' operation attribute cannot be supplied in a Create-Job request." = "The ‘%s’ operation attribute cannot be supplied in a Create-Job request.";
-"The PPD file \"%s\" could not be found." = "The PPD file “%s” could not be found.";
-"The PPD file \"%s\" could not be opened: %s" = "The PPD file “%s” could not be opened: %s";
-"The PPD file could not be opened." = "The PPD file could not be opened.";
-"The class name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#)." = "The class name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#).";
-"The notify-lease-duration attribute cannot be used with job subscriptions." = "The notify-lease-duration attribute cannot be used with job subscriptions.";
-"The notify-user-data value is too large (%d > 63 octets)." = "The notify-user-data value is too large (%d > 63 octets).";
-"The printer configuration is incorrect or the printer no longer exists." = "The printer configuration is incorrect or the printer no longer exists.";
-"The printer did not respond." = "The printer did not respond.";
-"The printer is in use." = "The printer is in use.";
-"The printer is not connected." = "The printer is not connected.";
-"The printer is not responding." = "The printer is not responding.";
-"The printer is now connected." = "The printer is now connected.";
-"The printer is now online." = "The printer is now online.";
-"The printer is offline." = "The printer is offline.";
-"The printer is unreachable at this time." = "The printer is unreachable at this time.";
-"The printer may not exist or is unavailable at this time." = "The printer may not exist or is unavailable at this time.";
-"The printer name may only contain up to 127 printable characters and may not contain spaces, slashes (/ \\), quotes (' \"), question mark (?), or the pound sign (#)." = "The printer name may only contain up to 127 printable characters and may not contain spaces, slashes (/ \\), quotes (’ ″), question mark (?), or the pound sign (#).";
-"The printer or class does not exist." = "The printer or class does not exist.";
-"The printer or class is not shared." = "The printer or class is not shared.";
-"The printer-uri \"%s\" contains invalid characters." = "The printer-uri “%s” contains invalid characters.";
-"The printer-uri attribute is required." = "The printer-uri attribute is required.";
-"The printer-uri must be of the form \"ipp://HOSTNAME/classes/CLASSNAME\"." = "The printer-uri must be of the form “ipp://HOSTNAME/classes/CLASSNAME”.";
-"The printer-uri must be of the form \"ipp://HOSTNAME/printers/PRINTERNAME\"." = "The printer-uri must be of the form “ipp://HOSTNAME/printers/PRINTERNAME”.";
-"The web interface is currently disabled. Run \"cupsctl WebInterface=yes\" to enable it." = "The web interface is currently disabled. Run “cupsctl WebInterface=yes” to enable it.";
-"The which-jobs value \"%s\" is not supported." = "The which-jobs value “%s” is not supported.";
-"There are too many subscriptions." = "There are too many subscriptions.";
-"There was an unrecoverable USB error." = "There was an unrecoverable USB error.";
-"Thermal Transfer Media" = "Thermal Transfer Media";
-"Too many active jobs." = "Too many active jobs.";
-"Too many job-sheets values (%d > 2)." = "Too many job-sheets values (%d > 2).";
-"Too many printer-state-reasons values (%d > %d)." = "Too many printer-state-reasons values (%d > %d).";
-"Transparency" = "Transparency";
-"Tray" = "Tray";
-"Tray 1" = "Tray 1";
-"Tray 2" = "Tray 2";
-"Tray 3" = "Tray 3";
-"Tray 4" = "Tray 4";
-"Trust on first use is disabled." = "Trust on first use is disabled.";
-"URI Too Long" = "URI Too Long";
-"URI too large" = "URI too large";
-"US Fanfold" = "US Fanfold";
-"US Ledger" = "US Ledger";
-"US Legal" = "US Legal";
-"US Legal Oversize" = "US Legal Oversize";
-"US Letter" = "US Letter";
-"US Letter Long Edge" = "US Letter Long Edge";
-"US Letter Oversize" = "US Letter Oversize";
-"US Letter Oversize Long Edge" = "US Letter Oversize Long Edge";
-"US Letter Small" = "US Letter Small";
-"Unable to access cupsd.conf file" = "Unable to access cupsd.conf file";
-"Unable to access help file." = "Unable to access help file.";
-"Unable to add class" = "Unable to add class";
-"Unable to add document to print job." = "Unable to add document to print job.";
-"Unable to add extension to X.509 certificate." = "Unable to add extension to X.509 certificate.";
-"Unable to add job for destination \"%s\"." = "Unable to add job for destination “%s”.";
-"Unable to add printer" = "Unable to add printer";
-"Unable to allocate IPP attribute." = "Unable to allocate IPP attribute.";
-"Unable to allocate memory for file types." = "Unable to allocate memory for file types.";
-"Unable to allocate memory for page info" = "Unable to allocate memory for page info";
-"Unable to allocate memory for pages array" = "Unable to allocate memory for pages array";
-"Unable to allocate memory for printer: %s" = "Unable to allocate memory for printer: %s";
-"Unable to cancel print job." = "Unable to cancel print job.";
-"Unable to change printer" = "Unable to change printer";
-"Unable to change server settings" = "Unable to change server settings";
-"Unable to commit PPD file: %s" = "Unable to commit PPD file: %s";
-"Unable to compile mimeMediaType regular expression: %s." = "Unable to compile mimeMediaType regular expression: %s.";
-"Unable to compile naturalLanguage regular expression: %s." = "Unable to compile naturalLanguage regular expression: %s.";
-"Unable to configure printer options." = "Unable to configure printer options.";
-"Unable to configure private key context." = "Unable to configure private key context.";
-"Unable to connect to %s:%d: %s" = "Unable to connect to %s:%d: %s";
-"Unable to connect to host." = "Unable to connect to host.";
-"Unable to contact printer, queuing on next printer in class." = "Unable to contact printer, queuing on next printer in class.";
-"Unable to copy PPD file - %s" = "Unable to copy PPD file - %s";
-"Unable to create PPD for printer: %s" = "Unable to create PPD for printer: %s";
-"Unable to create PPD: %s" = "Unable to create PPD: %s";
-"Unable to create X.509 certificate signing request." = "Unable to create X.509 certificate signing request.";
-"Unable to create X.509 certificate." = "Unable to create X.509 certificate.";
-"Unable to create printer-uri" = "Unable to create printer-uri";
-"Unable to create printer." = "Unable to create printer.";
-"Unable to create private key context." = "Unable to create private key context.";
-"Unable to create private key." = "Unable to create private key.";
-"Unable to create server credentials." = "Unable to create server credentials.";
-"Unable to create spool directory \"%s\": %s" = "Unable to create spool directory “%s”: %s";
-"Unable to create temporary file" = "Unable to create temporary file";
-"Unable to delete class" = "Unable to delete class";
-"Unable to delete printer" = "Unable to delete printer";
-"Unable to do maintenance command" = "Unable to do maintenance command";
-"Unable to edit cupsd.conf files larger than 1MB" = "Unable to edit cupsd.conf files larger than 1MB";
-"Unable to execute command \"%s\": %s" = "Unable to execute command “%s”: %s";
-"Unable to find destination for job" = "Unable to find destination for job";
-"Unable to finish request." = "Unable to finish request.";
-"Unable to get backend exit status." = "Unable to get backend exit status.";
-"Unable to get class list" = "Unable to get class list";
-"Unable to get class status" = "Unable to get class status";
-"Unable to get list of printer drivers" = "Unable to get list of printer drivers";
-"Unable to get printer attributes" = "Unable to get printer attributes";
-"Unable to get printer list" = "Unable to get printer list";
-"Unable to get printer status" = "Unable to get printer status";
-"Unable to get printer status." = "Unable to get printer status.";
-"Unable to import X.509 certificate request." = "Unable to import X.509 certificate request.";
-"Unable to import credentials." = "Unable to import credentials.";
-"Unable to initialize private key context." = "Unable to initialize private key context.";
-"Unable to load X.509 CA certificate and private key." = "Unable to load X.509 CA certificate and private key.";
-"Unable to load help index." = "Unable to load help index.";
-"Unable to locate printer \"%s\"." = "Unable to locate printer “%s”.";
-"Unable to locate printer." = "Unable to locate printer.";
-"Unable to modify class" = "Unable to modify class";
-"Unable to modify printer" = "Unable to modify printer";
-"Unable to move job" = "Unable to move job";
-"Unable to move jobs" = "Unable to move jobs";
-"Unable to open PPD file" = "Unable to open PPD file";
-"Unable to open cupsd.conf file:" = "Unable to open cupsd.conf file:";
-"Unable to open device file" = "Unable to open device file";
-"Unable to open document #%d in job #%d." = "Unable to open document #%d in job #%d.";
-"Unable to open help file." = "Unable to open help file.";
-"Unable to open print file" = "Unable to open print file";
-"Unable to open raster file" = "Unable to open raster file";
-"Unable to print test page" = "Unable to print test page";
-"Unable to read generated PPD: %s" = "Unable to read generated PPD: %s";
-"Unable to read print data." = "Unable to read print data.";
-"Unable to read response." = "Unable to read response.";
-"Unable to reallocate IPP attribute value." = "Unable to reallocate IPP attribute value.";
-"Unable to rename job document file." = "Unable to rename job document file.";
-"Unable to resolve printer-uri." = "Unable to resolve printer-uri.";
-"Unable to run cups-driverd: %s" = "Unable to run cups-driverd: %s";
-"Unable to save PPD file: %s" = "Unable to save PPD file: %s";
-"Unable to save value for \"%s\" with a temporary printer." = "Unable to save value for “%s” with a temporary printer.";
-"Unable to see in file" = "Unable to see in file";
-"Unable to send command to printer driver" = "Unable to send command to printer driver";
-"Unable to send data to printer." = "Unable to send data to printer.";
-"Unable to set options" = "Unable to set options";
-"Unable to set server default" = "Unable to set server default";
-"Unable to start backend process." = "Unable to start backend process.";
-"Unable to upload cupsd.conf file" = "Unable to upload cupsd.conf file";
-"Unable to use legacy USB class driver." = "Unable to use legacy USB class driver.";
-"Unable to verify X.509 certificate request." = "Unable to verify X.509 certificate request.";
-"Unable to write X.509 certificate signing request." = "Unable to write X.509 certificate signing request.";
-"Unable to write X.509 certificate." = "Unable to write X.509 certificate.";
-"Unable to write print data" = "Unable to write print data";
-"Unable to write private key." = "Unable to write private key.";
-"Unable to write uncompressed print data: %s" = "Unable to write uncompressed print data: %s";
-"Unauthorized" = "Unauthorized";
-"Units" = "Units";
-"Unknown" = "Unknown";
-"Unknown choice \"%s\" for option \"%s\"." = "Unknown choice “%s” for option “%s”.";
-"Unknown encryption option value: \"%s\"." = "Unknown encryption option value: “%s”.";
-"Unknown file order: \"%s\"." = "Unknown file order: “%s”.";
-"Unknown format character: \"%c\"." = "Unknown format character: “%c”.";
-"Unknown hash algorithm." = "Unknown hash algorithm.";
-"Unknown media size name." = "Unknown media size name.";
-"Unknown option \"%s\" with value \"%s\"." = "Unknown option “%s” with value “%s”.";
-"Unknown option \"%s\"." = "Unknown option “%s”.";
-"Unknown print mode: \"%s\"." = "Unknown print mode: “%s”.";
-"Unknown printer-error-policy \"%s\"." = "Unknown printer-error-policy “%s”.";
-"Unknown printer-op-policy \"%s\"." = "Unknown printer-op-policy “%s”.";
-"Unknown request method." = "Unknown request method.";
-"Unknown request version." = "Unknown request version.";
-"Unknown scheme in URI" = "Unknown scheme in URI";
-"Unknown service name." = "Unknown service name.";
-"Unknown version option value: \"%s\"." = "Unknown version option value: “%s”.";
-"Unsupported 'compression' value \"%s\"." = "Unsupported ‘compression’ value “%s”.";
-"Unsupported 'document-format' value \"%s\"." = "Unsupported ‘document-format’ value “%s”.";
-"Unsupported 'job-hold-until' value." = "Unsupported ‘job-hold-until’ value.";
-"Unsupported 'job-name' value." = "Unsupported ‘job-name’ value.";
-"Unsupported URI scheme." = "Unsupported URI scheme.";
-"Unsupported character set \"%s\"." = "Unsupported character set “%s”.";
-"Unsupported compression \"%s\"." = "Unsupported compression “%s”.";
-"Unsupported document-format \"%s\"." = "Unsupported document-format “%s”.";
-"Unsupported document-format \"%s/%s\"." = "Unsupported document-format “%s/%s”.";
-"Unsupported format \"%s\"." = "Unsupported format “%s”.";
-"Unsupported margins." = "Unsupported margins.";
-"Unsupported media value." = "Unsupported media value.";
-"Unsupported number-up value %d, using number-up=1." = "Unsupported number-up value %d, using number-up=1.";
-"Unsupported number-up-layout value %s, using number-up-layout=lrtb." = "Unsupported number-up-layout value %s, using number-up-layout=lrtb.";
-"Unsupported page-border value %s, using page-border=none." = "Unsupported page-border value %s, using page-border=none.";
-"Unsupported raster data." = "Unsupported raster data.";
-"Unsupported value type" = "Unsupported value type";
-"Upgrade Required" = "Upgrade Required";
-"Usage: %s [options] destination(s)" = "Usage: %s [options] destination(s)";
-"Usage: %s job-id user title copies options [file]" = "Usage: %s job-id user title copies options [file]";
-"Usage: cancel [options] [id]\n cancel [options] [destination]\n cancel [options] [destination-id]" = "Usage: cancel [options] [id]\n cancel [options] [destination]\n cancel [options] [destination-id]";
-"Usage: cupsctl [options] [param=value ... paramN=valueN]" = "Usage: cupsctl [options] [param=value … paramN=valueN]";
-"Usage: cupsd [options]" = "Usage: cupsd [options]";
-"Usage: cupsfilter [ OPTIONS ] [ -- ] FILENAME" = "Usage: cupsfilter [ OPTIONS ] [ -- ] FILENAME";
-"Usage: cupstestppd [options] filename1.ppd[.gz] [... filenameN.ppd[.gz]]\n program | cupstestppd [options] -" = "Usage: cupstestppd [options] filename1.ppd[.gz] [… filenameN.ppd[.gz]]\n program | cupstestppd [options] -";
-"Usage: ippeveprinter [options] \"name\"" = "Usage: ippeveprinter [options] “name”";
-"Usage: ippfind [options] regtype[,subtype][.domain.] ... [expression]\n ippfind [options] name[.regtype[.domain.]] ... [expression]\n ippfind --help\n ippfind --version" = "Usage: ippfind [options] regtype[,subtype][.domain.] … [expression]\n ippfind [options] name[.regtype[.domain.]] … [expression]\n ippfind --help\n ippfind --version";
-"Usage: ipptool [options] URI filename [ ... filenameN ]" = "Usage: ipptool [options] URI filename [ … filenameN ]";
-"Usage: lp [options] [--] [file(s)]\n lp [options] -i id" = "Usage: lp [options] [--] [file(s)]\n lp [options] -i id";
-"Usage: lpadmin [options] -d destination\n lpadmin [options] -p destination\n lpadmin [options] -p destination -c class\n lpadmin [options] -p destination -r class\n lpadmin [options] -x destination" = "Usage: lpadmin [options] -d destination\n lpadmin [options] -p destination\n lpadmin [options] -p destination -c class\n lpadmin [options] -p destination -r class\n lpadmin [options] -x destination";
-"Usage: lpinfo [options] -m\n lpinfo [options] -v" = "Usage: lpinfo [options] -m\n lpinfo [options] -v";
-"Usage: lpmove [options] job destination\n lpmove [options] source-destination destination" = "Usage: lpmove [options] job destination\n lpmove [options] source-destination destination";
-"Usage: lpoptions [options] -d destination\n lpoptions [options] [-p destination] [-l]\n lpoptions [options] [-p destination] -o option[=value]\n lpoptions [options] -x destination" = "Usage: lpoptions [options] -d destination\n lpoptions [options] [-p destination] [-l]\n lpoptions [options] [-p destination] -o option[=value]\n lpoptions [options] -x destination";
-"Usage: lpq [options] [+interval]" = "Usage: lpq [options] [+interval]";
-"Usage: lpr [options] [file(s)]" = "Usage: lpr [options] [file(s)]";
-"Usage: lprm [options] [id]\n lprm [options] -" = "Usage: lprm [options] [id]\n lprm [options] -";
-"Usage: lpstat [options]" = "Usage: lpstat [options]";
-"Usage: ppdc [options] filename.drv [ ... filenameN.drv ]" = "Usage: ppdc [options] filename.drv [ … filenameN.drv ]";
-"Usage: ppdhtml [options] filename.drv >filename.html" = "Usage: ppdhtml [options] filename.drv >filename.html";
-"Usage: ppdi [options] filename.ppd [ ... filenameN.ppd ]" = "Usage: ppdi [options] filename.ppd [ … filenameN.ppd ]";
-"Usage: ppdmerge [options] filename.ppd [ ... filenameN.ppd ]" = "Usage: ppdmerge [options] filename.ppd [ … filenameN.ppd ]";
-"Usage: ppdpo [options] -o filename.po filename.drv [ ... filenameN.drv ]" = "Usage: ppdpo [options] -o filename.po filename.drv [ … filenameN.drv ]";
-"Usage: snmp [host-or-ip-address]" = "Usage: snmp [host-or-ip-address]";
-"Using spool directory \"%s\"." = "Using spool directory “%s”.";
-"Validation of subjectAltName in X.509 certificate request failed." = "Validation of subjectAltName in X.509 certificate request failed.";
-"Value uses indefinite length" = "Value uses indefinite length";
-"VarBind uses indefinite length" = "VarBind uses indefinite length";
-"Version uses indefinite length" = "Version uses indefinite length";
-"Waiting for job to complete." = "Waiting for job to complete.";
-"Waiting for printer to become available." = "Waiting for printer to become available.";
-"Waiting for printer to finish." = "Waiting for printer to finish.";
-"Warning: This program will be removed in a future version of CUPS." = "Warning: This program will be removed in a future version of CUPS.";
-"Web Interface is Disabled" = "Web Interface is Disabled";
-"Yes" = "Yes";
-"You cannot access this page." = "You cannot access this page.";
-"You must access this page using the URL https://%s:%d%s." = "You must access this page using the URL https://%s:%d%s.";
-"Your account does not have the necessary privileges." = "Your account does not have the necessary privileges.";
-"ZPL Label Printer" = "ZPL Label Printer";
-"Zebra" = "Zebra";
-"aborted" = "aborted";
-// TRANSLATORS: Accuracy Units
-"accuracy-units" = "Accuracy Units";
-// TRANSLATORS: Millimeters
-"accuracy-units.mm" = "Millimeters";
-// TRANSLATORS: Nanometers
-"accuracy-units.nm" = "Nanometers";
-// TRANSLATORS: Micrometers
-"accuracy-units.um" = "Micrometers";
-// TRANSLATORS: Bale Output
-"baling" = "Bale Output";
-// TRANSLATORS: Bale Using
-"baling-type" = "Bale Using";
-// TRANSLATORS: Band
-"baling-type.band" = "Band";
-// TRANSLATORS: Shrink Wrap
-"baling-type.shrink-wrap" = "Shrink Wrap";
-// TRANSLATORS: Wrap
-"baling-type.wrap" = "Wrap";
-// TRANSLATORS: Bale After
-"baling-when" = "Bale After";
-// TRANSLATORS: Job
-"baling-when.after-job" = "Job";
-// TRANSLATORS: Sets
-"baling-when.after-sets" = "Sets";
-// TRANSLATORS: Bind Output
-"binding" = "Bind Output";
-// TRANSLATORS: Bind Edge
-"binding-reference-edge" = "Bind Edge";
-// TRANSLATORS: Bottom
-"binding-reference-edge.bottom" = "Bottom";
-// TRANSLATORS: Left
-"binding-reference-edge.left" = "Left";
-// TRANSLATORS: Right
-"binding-reference-edge.right" = "Right";
-// TRANSLATORS: Top
-"binding-reference-edge.top" = "Top";
-// TRANSLATORS: Binder Type
-"binding-type" = "Binder Type";
-// TRANSLATORS: Adhesive
-"binding-type.adhesive" = "Adhesive";
-// TRANSLATORS: Comb
-"binding-type.comb" = "Comb";
-// TRANSLATORS: Flat
-"binding-type.flat" = "Flat";
-// TRANSLATORS: Padding
-"binding-type.padding" = "Padding";
-// TRANSLATORS: Perfect
-"binding-type.perfect" = "Perfect";
-// TRANSLATORS: Spiral
-"binding-type.spiral" = "Spiral";
-// TRANSLATORS: Tape
-"binding-type.tape" = "Tape";
-// TRANSLATORS: Velo
-"binding-type.velo" = "Velo";
-"canceled" = "canceled";
-// TRANSLATORS: Chamber Humidity
-"chamber-humidity" = "Chamber Humidity";
-// TRANSLATORS: Chamber Temperature
-"chamber-temperature" = "Chamber Temperature";
-// TRANSLATORS: Print Job Cost
-"charge-info-message" = "Print Job Cost";
-// TRANSLATORS: Coat Sheets
-"coating" = "Coat Sheets";
-// TRANSLATORS: Add Coating To
-"coating-sides" = "Add Coating To";
-// TRANSLATORS: Back
-"coating-sides.back" = "Back";
-// TRANSLATORS: Front and Back
-"coating-sides.both" = "Front and Back";
-// TRANSLATORS: Front
-"coating-sides.front" = "Front";
-// TRANSLATORS: Type of Coating
-"coating-type" = "Type of Coating";
-// TRANSLATORS: Archival
-"coating-type.archival" = "Archival";
-// TRANSLATORS: Archival Glossy
-"coating-type.archival-glossy" = "Archival Glossy";
-// TRANSLATORS: Archival Matte
-"coating-type.archival-matte" = "Archival Matte";
-// TRANSLATORS: Archival Semi Gloss
-"coating-type.archival-semi-gloss" = "Archival Semi Gloss";
-// TRANSLATORS: Glossy
-"coating-type.glossy" = "Glossy";
-// TRANSLATORS: High Gloss
-"coating-type.high-gloss" = "High Gloss";
-// TRANSLATORS: Matte
-"coating-type.matte" = "Matte";
-// TRANSLATORS: Semi-gloss
-"coating-type.semi-gloss" = "Semi-gloss";
-// TRANSLATORS: Silicone
-"coating-type.silicone" = "Silicone";
-// TRANSLATORS: Translucent
-"coating-type.translucent" = "Translucent";
-"completed" = "completed";
-// TRANSLATORS: Print Confirmation Sheet
-"confirmation-sheet-print" = "Print Confirmation Sheet";
-// TRANSLATORS: Copies
-"copies" = "Copies";
-// TRANSLATORS: Back Cover
-"cover-back" = "Back Cover";
-// TRANSLATORS: Front Cover
-"cover-front" = "Front Cover";
-// TRANSLATORS: Cover Sheet Info
-"cover-sheet-info" = "Cover Sheet Info";
-// TRANSLATORS: Date Time
-"cover-sheet-info-supported.date-time" = "Date Time";
-// TRANSLATORS: From Name
-"cover-sheet-info-supported.from-name" = "From Name";
-// TRANSLATORS: Logo
-"cover-sheet-info-supported.logo" = "Logo";
-// TRANSLATORS: Message
-"cover-sheet-info-supported.message" = "Message";
-// TRANSLATORS: Organization
-"cover-sheet-info-supported.organization" = "Organization";
-// TRANSLATORS: Subject
-"cover-sheet-info-supported.subject" = "Subject";
-// TRANSLATORS: To Name
-"cover-sheet-info-supported.to-name" = "To Name";
-// TRANSLATORS: Printed Cover
-"cover-type" = "Printed Cover";
-// TRANSLATORS: No Cover
-"cover-type.no-cover" = "No Cover";
-// TRANSLATORS: Back Only
-"cover-type.print-back" = "Back Only";
-// TRANSLATORS: Front and Back
-"cover-type.print-both" = "Front and Back";
-// TRANSLATORS: Front Only
-"cover-type.print-front" = "Front Only";
-// TRANSLATORS: None
-"cover-type.print-none" = "None";
-// TRANSLATORS: Cover Output
-"covering" = "Cover Output";
-// TRANSLATORS: Add Cover
-"covering-name" = "Add Cover";
-// TRANSLATORS: Plain
-"covering-name.plain" = "Plain";
-// TRANSLATORS: Pre-cut
-"covering-name.pre-cut" = "Pre-cut";
-// TRANSLATORS: Pre-printed
-"covering-name.pre-printed" = "Pre-printed";
-"cups-deviced failed to execute." = "cups-deviced failed to execute.";
-"cups-driverd failed to execute." = "cups-driverd failed to execute.";
-"cups-driverd failed to get PPD file - see error_log for details." = "cups-driverd failed to get PPD file - see error_log for details.";
-"cupsctl: Cannot set %s directly." = "cupsctl: Cannot set %s directly.";
-"cupsctl: Unable to connect to server: %s" = "cupsctl: Unable to connect to server: %s";
-"cupsctl: Unknown option \"%s\"" = "cupsctl: Unknown option “%s”";
-"cupsctl: Unknown option \"-%c\"" = "cupsctl: Unknown option “-%c”";
-"cupsd: Expected config filename after \"-c\" option." = "cupsd: Expected config filename after “-c” option.";
-"cupsd: Expected cups-files.conf filename after \"-s\" option." = "cupsd: Expected cups-files.conf filename after “-s” option.";
-"cupsd: On-demand support not compiled in, running in normal mode." = "cupsd: On-demand support not compiled in, running in normal mode.";
-"cupsd: Relative cups-files.conf filename not allowed." = "cupsd: Relative cups-files.conf filename not allowed.";
-"cupsd: Unable to get current directory." = "cupsd: Unable to get current directory.";
-"cupsd: Unable to get path to cups-files.conf file." = "cupsd: Unable to get path to cups-files.conf file.";
-"cupsd: Unknown argument \"%s\" - aborting." = "cupsd: Unknown argument “%s” - aborting.";
-"cupsd: Unknown option \"%c\" - aborting." = "cupsd: Unknown option “%c” - aborting.";
-"cupsfilter: Invalid document number %d." = "cupsfilter: Invalid document number %d.";
-"cupsfilter: Invalid job ID %d." = "cupsfilter: Invalid job ID %d.";
-"cupsfilter: Only one filename can be specified." = "cupsfilter: Only one filename can be specified.";
-"cupsfilter: Unable to get job file - %s" = "cupsfilter: Unable to get job file - %s";
-"cupstestppd: The -q option is incompatible with the -v option." = "cupstestppd: The -q option is incompatible with the -v option.";
-"cupstestppd: The -v option is incompatible with the -q option." = "cupstestppd: The -v option is incompatible with the -q option.";
-// TRANSLATORS: Detailed Status Message
-"detailed-status-message" = "Detailed Status Message";
-"device for %s/%s: %s" = "device for %s/%s: %s";
-"device for %s: %s" = "device for %s: %s";
-// TRANSLATORS: Copies
-"document-copies" = "Copies";
-// TRANSLATORS: Document Privacy Attributes
-"document-privacy-attributes" = "Document Privacy Attributes";
-// TRANSLATORS: All
-"document-privacy-attributes.all" = "All";
-// TRANSLATORS: Default
-"document-privacy-attributes.default" = "Default";
-// TRANSLATORS: Document Description
-"document-privacy-attributes.document-description" = "Document Description";
-// TRANSLATORS: Document Template
-"document-privacy-attributes.document-template" = "Document Template";
-// TRANSLATORS: None
-"document-privacy-attributes.none" = "None";
-// TRANSLATORS: Document Privacy Scope
-"document-privacy-scope" = "Document Privacy Scope";
-// TRANSLATORS: All
-"document-privacy-scope.all" = "All";
-// TRANSLATORS: Default
-"document-privacy-scope.default" = "Default";
-// TRANSLATORS: None
-"document-privacy-scope.none" = "None";
-// TRANSLATORS: Owner
-"document-privacy-scope.owner" = "Owner";
-// TRANSLATORS: Document State
-"document-state" = "Document State";
-// TRANSLATORS: Detailed Document State
-"document-state-reasons" = "Detailed Document State";
-// TRANSLATORS: Aborted By System
-"document-state-reasons.aborted-by-system" = "Aborted By System";
-// TRANSLATORS: Canceled At Device
-"document-state-reasons.canceled-at-device" = "Canceled At Device";
-// TRANSLATORS: Canceled By Operator
-"document-state-reasons.canceled-by-operator" = "Canceled By Operator";
-// TRANSLATORS: Canceled By User
-"document-state-reasons.canceled-by-user" = "Canceled By User";
-// TRANSLATORS: Completed Successfully
-"document-state-reasons.completed-successfully" = "Completed Successfully";
-// TRANSLATORS: Completed With Errors
-"document-state-reasons.completed-with-errors" = "Completed With Errors";
-// TRANSLATORS: Completed With Warnings
-"document-state-reasons.completed-with-warnings" = "Completed With Warnings";
-// TRANSLATORS: Compression Error
-"document-state-reasons.compression-error" = "Compression Error";
-// TRANSLATORS: Data Insufficient
-"document-state-reasons.data-insufficient" = "Data Insufficient";
-// TRANSLATORS: Digital Signature Did Not Verify
-"document-state-reasons.digital-signature-did-not-verify" = "Digital Signature Did Not Verify";
-// TRANSLATORS: Digital Signature Type Not Supported
-"document-state-reasons.digital-signature-type-not-supported" = "Digital Signature Type Not Supported";
-// TRANSLATORS: Digital Signature Wait
-"document-state-reasons.digital-signature-wait" = "Digital Signature Wait";
-// TRANSLATORS: Document Access Error
-"document-state-reasons.document-access-error" = "Document Access Error";
-// TRANSLATORS: Document Fetchable
-"document-state-reasons.document-fetchable" = "Document Fetchable";
-// TRANSLATORS: Document Format Error
-"document-state-reasons.document-format-error" = "Document Format Error";
-// TRANSLATORS: Document Password Error
-"document-state-reasons.document-password-error" = "Document Password Error";
-// TRANSLATORS: Document Permission Error
-"document-state-reasons.document-permission-error" = "Document Permission Error";
-// TRANSLATORS: Document Security Error
-"document-state-reasons.document-security-error" = "Document Security Error";
-// TRANSLATORS: Document Unprintable Error
-"document-state-reasons.document-unprintable-error" = "Document Unprintable Error";
-// TRANSLATORS: Errors Detected
-"document-state-reasons.errors-detected" = "Errors Detected";
-// TRANSLATORS: Incoming
-"document-state-reasons.incoming" = "Incoming";
-// TRANSLATORS: Interpreting
-"document-state-reasons.interpreting" = "Interpreting";
-// TRANSLATORS: None
-"document-state-reasons.none" = "None";
-// TRANSLATORS: Outgoing
-"document-state-reasons.outgoing" = "Outgoing";
-// TRANSLATORS: Printing
-"document-state-reasons.printing" = "Printing";
-// TRANSLATORS: Processing To Stop Point
-"document-state-reasons.processing-to-stop-point" = "Processing To Stop Point";
-// TRANSLATORS: Queued
-"document-state-reasons.queued" = "Queued";
-// TRANSLATORS: Queued For Marker
-"document-state-reasons.queued-for-marker" = "Queued For Marker";
-// TRANSLATORS: Queued In Device
-"document-state-reasons.queued-in-device" = "Queued In Device";
-// TRANSLATORS: Resources Are Not Ready
-"document-state-reasons.resources-are-not-ready" = "Resources Are Not Ready";
-// TRANSLATORS: Resources Are Not Supported
-"document-state-reasons.resources-are-not-supported" = "Resources Are Not Supported";
-// TRANSLATORS: Submission Interrupted
-"document-state-reasons.submission-interrupted" = "Submission Interrupted";
-// TRANSLATORS: Transforming
-"document-state-reasons.transforming" = "Transforming";
-// TRANSLATORS: Unsupported Compression
-"document-state-reasons.unsupported-compression" = "Unsupported Compression";
-// TRANSLATORS: Unsupported Document Format
-"document-state-reasons.unsupported-document-format" = "Unsupported Document Format";
-// TRANSLATORS: Warnings Detected
-"document-state-reasons.warnings-detected" = "Warnings Detected";
-// TRANSLATORS: Pending
-"document-state.3" = "Pending";
-// TRANSLATORS: Processing
-"document-state.5" = "Processing";
-// TRANSLATORS: Stopped
-"document-state.6" = "Stopped";
-// TRANSLATORS: Canceled
-"document-state.7" = "Canceled";
-// TRANSLATORS: Aborted
-"document-state.8" = "Aborted";
-// TRANSLATORS: Completed
-"document-state.9" = "Completed";
-"error-index uses indefinite length" = "error-index uses indefinite length";
-"error-status uses indefinite length" = "error-status uses indefinite length";
-"expression --and expression\n Logical AND" = "expression --and expression\n Logical AND";
-"expression --or expression\n Logical OR" = "expression --or expression\n Logical OR";
-"expression expression Logical AND" = "expression expression Logical AND";
-// TRANSLATORS: Feed Orientation
-"feed-orientation" = "Feed Orientation";
-// TRANSLATORS: Long Edge First
-"feed-orientation.long-edge-first" = "Long Edge First";
-// TRANSLATORS: Short Edge First
-"feed-orientation.short-edge-first" = "Short Edge First";
-// TRANSLATORS: Fetch Status Code
-"fetch-status-code" = "Fetch Status Code";
-// TRANSLATORS: Finishing Template
-"finishing-template" = "Finishing Template";
-// TRANSLATORS: Bale
-"finishing-template.bale" = "Bale";
-// TRANSLATORS: Bind
-"finishing-template.bind" = "Bind";
-// TRANSLATORS: Bind Bottom
-"finishing-template.bind-bottom" = "Bind Bottom";
-// TRANSLATORS: Bind Left
-"finishing-template.bind-left" = "Bind Left";
-// TRANSLATORS: Bind Right
-"finishing-template.bind-right" = "Bind Right";
-// TRANSLATORS: Bind Top
-"finishing-template.bind-top" = "Bind Top";
-// TRANSLATORS: Booklet Maker
-"finishing-template.booklet-maker" = "Booklet Maker";
-// TRANSLATORS: Coat
-"finishing-template.coat" = "Coat";
-// TRANSLATORS: Cover
-"finishing-template.cover" = "Cover";
-// TRANSLATORS: Edge Stitch
-"finishing-template.edge-stitch" = "Edge Stitch";
-// TRANSLATORS: Edge Stitch Bottom
-"finishing-template.edge-stitch-bottom" = "Edge Stitch Bottom";
-// TRANSLATORS: Edge Stitch Left
-"finishing-template.edge-stitch-left" = "Edge Stitch Left";
-// TRANSLATORS: Edge Stitch Right
-"finishing-template.edge-stitch-right" = "Edge Stitch Right";
-// TRANSLATORS: Edge Stitch Top
-"finishing-template.edge-stitch-top" = "Edge Stitch Top";
-// TRANSLATORS: Fold
-"finishing-template.fold" = "Fold";
-// TRANSLATORS: Accordion Fold
-"finishing-template.fold-accordion" = "Accordion Fold";
-// TRANSLATORS: Double Gate Fold
-"finishing-template.fold-double-gate" = "Double Gate Fold";
-// TRANSLATORS: Engineering Z Fold
-"finishing-template.fold-engineering-z" = "Engineering Z Fold";
-// TRANSLATORS: Gate Fold
-"finishing-template.fold-gate" = "Gate Fold";
-// TRANSLATORS: Half Fold
-"finishing-template.fold-half" = "Half Fold";
-// TRANSLATORS: Half Z Fold
-"finishing-template.fold-half-z" = "Half Z Fold";
-// TRANSLATORS: Left Gate Fold
-"finishing-template.fold-left-gate" = "Left Gate Fold";
-// TRANSLATORS: Letter Fold
-"finishing-template.fold-letter" = "Letter Fold";
-// TRANSLATORS: Parallel Fold
-"finishing-template.fold-parallel" = "Parallel Fold";
-// TRANSLATORS: Poster Fold
-"finishing-template.fold-poster" = "Poster Fold";
-// TRANSLATORS: Right Gate Fold
-"finishing-template.fold-right-gate" = "Right Gate Fold";
-// TRANSLATORS: Z Fold
-"finishing-template.fold-z" = "Z Fold";
-// TRANSLATORS: JDF F10-1
-"finishing-template.jdf-f10-1" = "JDF F10-1";
-// TRANSLATORS: JDF F10-2
-"finishing-template.jdf-f10-2" = "JDF F10-2";
-// TRANSLATORS: JDF F10-3
-"finishing-template.jdf-f10-3" = "JDF F10-3";
-// TRANSLATORS: JDF F12-1
-"finishing-template.jdf-f12-1" = "JDF F12-1";
-// TRANSLATORS: JDF F12-10
-"finishing-template.jdf-f12-10" = "JDF F12-10";
-// TRANSLATORS: JDF F12-11
-"finishing-template.jdf-f12-11" = "JDF F12-11";
-// TRANSLATORS: JDF F12-12
-"finishing-template.jdf-f12-12" = "JDF F12-12";
-// TRANSLATORS: JDF F12-13
-"finishing-template.jdf-f12-13" = "JDF F12-13";
-// TRANSLATORS: JDF F12-14
-"finishing-template.jdf-f12-14" = "JDF F12-14";
-// TRANSLATORS: JDF F12-2
-"finishing-template.jdf-f12-2" = "JDF F12-2";
-// TRANSLATORS: JDF F12-3
-"finishing-template.jdf-f12-3" = "JDF F12-3";
-// TRANSLATORS: JDF F12-4
-"finishing-template.jdf-f12-4" = "JDF F12-4";
-// TRANSLATORS: JDF F12-5
-"finishing-template.jdf-f12-5" = "JDF F12-5";
-// TRANSLATORS: JDF F12-6
-"finishing-template.jdf-f12-6" = "JDF F12-6";
-// TRANSLATORS: JDF F12-7
-"finishing-template.jdf-f12-7" = "JDF F12-7";
-// TRANSLATORS: JDF F12-8
-"finishing-template.jdf-f12-8" = "JDF F12-8";
-// TRANSLATORS: JDF F12-9
-"finishing-template.jdf-f12-9" = "JDF F12-9";
-// TRANSLATORS: JDF F14-1
-"finishing-template.jdf-f14-1" = "JDF F14-1";
-// TRANSLATORS: JDF F16-1
-"finishing-template.jdf-f16-1" = "JDF F16-1";
-// TRANSLATORS: JDF F16-10
-"finishing-template.jdf-f16-10" = "JDF F16-10";
-// TRANSLATORS: JDF F16-11
-"finishing-template.jdf-f16-11" = "JDF F16-11";
-// TRANSLATORS: JDF F16-12
-"finishing-template.jdf-f16-12" = "JDF F16-12";
-// TRANSLATORS: JDF F16-13
-"finishing-template.jdf-f16-13" = "JDF F16-13";
-// TRANSLATORS: JDF F16-14
-"finishing-template.jdf-f16-14" = "JDF F16-14";
-// TRANSLATORS: JDF F16-2
-"finishing-template.jdf-f16-2" = "JDF F16-2";
-// TRANSLATORS: JDF F16-3
-"finishing-template.jdf-f16-3" = "JDF F16-3";
-// TRANSLATORS: JDF F16-4
-"finishing-template.jdf-f16-4" = "JDF F16-4";
-// TRANSLATORS: JDF F16-5
-"finishing-template.jdf-f16-5" = "JDF F16-5";
-// TRANSLATORS: JDF F16-6
-"finishing-template.jdf-f16-6" = "JDF F16-6";
-// TRANSLATORS: JDF F16-7
-"finishing-template.jdf-f16-7" = "JDF F16-7";
-// TRANSLATORS: JDF F16-8
-"finishing-template.jdf-f16-8" = "JDF F16-8";
-// TRANSLATORS: JDF F16-9
-"finishing-template.jdf-f16-9" = "JDF F16-9";
-// TRANSLATORS: JDF F18-1
-"finishing-template.jdf-f18-1" = "JDF F18-1";
-// TRANSLATORS: JDF F18-2
-"finishing-template.jdf-f18-2" = "JDF F18-2";
-// TRANSLATORS: JDF F18-3
-"finishing-template.jdf-f18-3" = "JDF F18-3";
-// TRANSLATORS: JDF F18-4
-"finishing-template.jdf-f18-4" = "JDF F18-4";
-// TRANSLATORS: JDF F18-5
-"finishing-template.jdf-f18-5" = "JDF F18-5";
-// TRANSLATORS: JDF F18-6
-"finishing-template.jdf-f18-6" = "JDF F18-6";
-// TRANSLATORS: JDF F18-7
-"finishing-template.jdf-f18-7" = "JDF F18-7";
-// TRANSLATORS: JDF F18-8
-"finishing-template.jdf-f18-8" = "JDF F18-8";
-// TRANSLATORS: JDF F18-9
-"finishing-template.jdf-f18-9" = "JDF F18-9";
-// TRANSLATORS: JDF F2-1
-"finishing-template.jdf-f2-1" = "JDF F2-1";
-// TRANSLATORS: JDF F20-1
-"finishing-template.jdf-f20-1" = "JDF F20-1";
-// TRANSLATORS: JDF F20-2
-"finishing-template.jdf-f20-2" = "JDF F20-2";
-// TRANSLATORS: JDF F24-1
-"finishing-template.jdf-f24-1" = "JDF F24-1";
-// TRANSLATORS: JDF F24-10
-"finishing-template.jdf-f24-10" = "JDF F24-10";
-// TRANSLATORS: JDF F24-11
-"finishing-template.jdf-f24-11" = "JDF F24-11";
-// TRANSLATORS: JDF F24-2
-"finishing-template.jdf-f24-2" = "JDF F24-2";
-// TRANSLATORS: JDF F24-3
-"finishing-template.jdf-f24-3" = "JDF F24-3";
-// TRANSLATORS: JDF F24-4
-"finishing-template.jdf-f24-4" = "JDF F24-4";
-// TRANSLATORS: JDF F24-5
-"finishing-template.jdf-f24-5" = "JDF F24-5";
-// TRANSLATORS: JDF F24-6
-"finishing-template.jdf-f24-6" = "JDF F24-6";
-// TRANSLATORS: JDF F24-7
-"finishing-template.jdf-f24-7" = "JDF F24-7";
-// TRANSLATORS: JDF F24-8
-"finishing-template.jdf-f24-8" = "JDF F24-8";
-// TRANSLATORS: JDF F24-9
-"finishing-template.jdf-f24-9" = "JDF F24-9";
-// TRANSLATORS: JDF F28-1
-"finishing-template.jdf-f28-1" = "JDF F28-1";
-// TRANSLATORS: JDF F32-1
-"finishing-template.jdf-f32-1" = "JDF F32-1";
-// TRANSLATORS: JDF F32-2
-"finishing-template.jdf-f32-2" = "JDF F32-2";
-// TRANSLATORS: JDF F32-3
-"finishing-template.jdf-f32-3" = "JDF F32-3";
-// TRANSLATORS: JDF F32-4
-"finishing-template.jdf-f32-4" = "JDF F32-4";
-// TRANSLATORS: JDF F32-5
-"finishing-template.jdf-f32-5" = "JDF F32-5";
-// TRANSLATORS: JDF F32-6
-"finishing-template.jdf-f32-6" = "JDF F32-6";
-// TRANSLATORS: JDF F32-7
-"finishing-template.jdf-f32-7" = "JDF F32-7";
-// TRANSLATORS: JDF F32-8
-"finishing-template.jdf-f32-8" = "JDF F32-8";
-// TRANSLATORS: JDF F32-9
-"finishing-template.jdf-f32-9" = "JDF F32-9";
-// TRANSLATORS: JDF F36-1
-"finishing-template.jdf-f36-1" = "JDF F36-1";
-// TRANSLATORS: JDF F36-2
-"finishing-template.jdf-f36-2" = "JDF F36-2";
-// TRANSLATORS: JDF F4-1
-"finishing-template.jdf-f4-1" = "JDF F4-1";
-// TRANSLATORS: JDF F4-2
-"finishing-template.jdf-f4-2" = "JDF F4-2";
-// TRANSLATORS: JDF F40-1
-"finishing-template.jdf-f40-1" = "JDF F40-1";
-// TRANSLATORS: JDF F48-1
-"finishing-template.jdf-f48-1" = "JDF F48-1";
-// TRANSLATORS: JDF F48-2
-"finishing-template.jdf-f48-2" = "JDF F48-2";
-// TRANSLATORS: JDF F6-1
-"finishing-template.jdf-f6-1" = "JDF F6-1";
-// TRANSLATORS: JDF F6-2
-"finishing-template.jdf-f6-2" = "JDF F6-2";
-// TRANSLATORS: JDF F6-3
-"finishing-template.jdf-f6-3" = "JDF F6-3";
-// TRANSLATORS: JDF F6-4
-"finishing-template.jdf-f6-4" = "JDF F6-4";
-// TRANSLATORS: JDF F6-5
-"finishing-template.jdf-f6-5" = "JDF F6-5";
-// TRANSLATORS: JDF F6-6
-"finishing-template.jdf-f6-6" = "JDF F6-6";
-// TRANSLATORS: JDF F6-7
-"finishing-template.jdf-f6-7" = "JDF F6-7";
-// TRANSLATORS: JDF F6-8
-"finishing-template.jdf-f6-8" = "JDF F6-8";
-// TRANSLATORS: JDF F64-1
-"finishing-template.jdf-f64-1" = "JDF F64-1";
-// TRANSLATORS: JDF F64-2
-"finishing-template.jdf-f64-2" = "JDF F64-2";
-// TRANSLATORS: JDF F8-1
-"finishing-template.jdf-f8-1" = "JDF F8-1";
-// TRANSLATORS: JDF F8-2
-"finishing-template.jdf-f8-2" = "JDF F8-2";
-// TRANSLATORS: JDF F8-3
-"finishing-template.jdf-f8-3" = "JDF F8-3";
-// TRANSLATORS: JDF F8-4
-"finishing-template.jdf-f8-4" = "JDF F8-4";
-// TRANSLATORS: JDF F8-5
-"finishing-template.jdf-f8-5" = "JDF F8-5";
-// TRANSLATORS: JDF F8-6
-"finishing-template.jdf-f8-6" = "JDF F8-6";
-// TRANSLATORS: JDF F8-7
-"finishing-template.jdf-f8-7" = "JDF F8-7";
-// TRANSLATORS: Jog Offset
-"finishing-template.jog-offset" = "Jog Offset";
-// TRANSLATORS: Laminate
-"finishing-template.laminate" = "Laminate";
-// TRANSLATORS: Punch
-"finishing-template.punch" = "Punch";
-// TRANSLATORS: Punch Bottom Left
-"finishing-template.punch-bottom-left" = "Punch Bottom Left";
-// TRANSLATORS: Punch Bottom Right
-"finishing-template.punch-bottom-right" = "Punch Bottom Right";
-// TRANSLATORS: 2-hole Punch Bottom
-"finishing-template.punch-dual-bottom" = "2-hole Punch Bottom";
-// TRANSLATORS: 2-hole Punch Left
-"finishing-template.punch-dual-left" = "2-hole Punch Left";
-// TRANSLATORS: 2-hole Punch Right
-"finishing-template.punch-dual-right" = "2-hole Punch Right";
-// TRANSLATORS: 2-hole Punch Top
-"finishing-template.punch-dual-top" = "2-hole Punch Top";
-// TRANSLATORS: Multi-hole Punch Bottom
-"finishing-template.punch-multiple-bottom" = "Multi-hole Punch Bottom";
-// TRANSLATORS: Multi-hole Punch Left
-"finishing-template.punch-multiple-left" = "Multi-hole Punch Left";
-// TRANSLATORS: Multi-hole Punch Right
-"finishing-template.punch-multiple-right" = "Multi-hole Punch Right";
-// TRANSLATORS: Multi-hole Punch Top
-"finishing-template.punch-multiple-top" = "Multi-hole Punch Top";
-// TRANSLATORS: 4-hole Punch Bottom
-"finishing-template.punch-quad-bottom" = "4-hole Punch Bottom";
-// TRANSLATORS: 4-hole Punch Left
-"finishing-template.punch-quad-left" = "4-hole Punch Left";
-// TRANSLATORS: 4-hole Punch Right
-"finishing-template.punch-quad-right" = "4-hole Punch Right";
-// TRANSLATORS: 4-hole Punch Top
-"finishing-template.punch-quad-top" = "4-hole Punch Top";
-// TRANSLATORS: Punch Top Left
-"finishing-template.punch-top-left" = "Punch Top Left";
-// TRANSLATORS: Punch Top Right
-"finishing-template.punch-top-right" = "Punch Top Right";
-// TRANSLATORS: 3-hole Punch Bottom
-"finishing-template.punch-triple-bottom" = "3-hole Punch Bottom";
-// TRANSLATORS: 3-hole Punch Left
-"finishing-template.punch-triple-left" = "3-hole Punch Left";
-// TRANSLATORS: 3-hole Punch Right
-"finishing-template.punch-triple-right" = "3-hole Punch Right";
-// TRANSLATORS: 3-hole Punch Top
-"finishing-template.punch-triple-top" = "3-hole Punch Top";
-// TRANSLATORS: Saddle Stitch
-"finishing-template.saddle-stitch" = "Saddle Stitch";
-// TRANSLATORS: Staple
-"finishing-template.staple" = "Staple";
-// TRANSLATORS: Staple Bottom Left
-"finishing-template.staple-bottom-left" = "Staple Bottom Left";
-// TRANSLATORS: Staple Bottom Right
-"finishing-template.staple-bottom-right" = "Staple Bottom Right";
-// TRANSLATORS: 2 Staples on Bottom
-"finishing-template.staple-dual-bottom" = "2 Staples on Bottom";
-// TRANSLATORS: 2 Staples on Left
-"finishing-template.staple-dual-left" = "2 Staples on Left";
-// TRANSLATORS: 2 Staples on Right
-"finishing-template.staple-dual-right" = "2 Staples on Right";
-// TRANSLATORS: 2 Staples on Top
-"finishing-template.staple-dual-top" = "2 Staples on Top";
-// TRANSLATORS: Staple Top Left
-"finishing-template.staple-top-left" = "Staple Top Left";
-// TRANSLATORS: Staple Top Right
-"finishing-template.staple-top-right" = "Staple Top Right";
-// TRANSLATORS: 3 Staples on Bottom
-"finishing-template.staple-triple-bottom" = "3 Staples on Bottom";
-// TRANSLATORS: 3 Staples on Left
-"finishing-template.staple-triple-left" = "3 Staples on Left";
-// TRANSLATORS: 3 Staples on Right
-"finishing-template.staple-triple-right" = "3 Staples on Right";
-// TRANSLATORS: 3 Staples on Top
-"finishing-template.staple-triple-top" = "3 Staples on Top";
-// TRANSLATORS: Trim
-"finishing-template.trim" = "Trim";
-// TRANSLATORS: Trim After Every Set
-"finishing-template.trim-after-copies" = "Trim After Every Set";
-// TRANSLATORS: Trim After Every Document
-"finishing-template.trim-after-documents" = "Trim After Every Document";
-// TRANSLATORS: Trim After Job
-"finishing-template.trim-after-job" = "Trim After Job";
-// TRANSLATORS: Trim After Every Page
-"finishing-template.trim-after-pages" = "Trim After Every Page";
-// TRANSLATORS: Trim After Every Set
-"finishing-template.trim-after-sets" = "Trim After Every Set";
-// TRANSLATORS: Trim After Every Page
-"finishing-template.trim-after-sheets" = "Trim After Every Page";
-// TRANSLATORS: Finishings
-"finishings" = "Finishings";
-// TRANSLATORS: Finishings
-"finishings-col" = "Finishings";
-// TRANSLATORS: Fold
-"finishings.10" = "Fold";
-// TRANSLATORS: Z Fold
-"finishings.100" = "Z Fold";
-// TRANSLATORS: Engineering Z Fold
-"finishings.101" = "Engineering Z Fold";
-// TRANSLATORS: Trim
-"finishings.11" = "Trim";
-// TRANSLATORS: Bale
-"finishings.12" = "Bale";
-// TRANSLATORS: Booklet Maker
-"finishings.13" = "Booklet Maker";
-// TRANSLATORS: Jog Offset
-"finishings.14" = "Jog Offset";
-// TRANSLATORS: Coat
-"finishings.15" = "Coat";
-// TRANSLATORS: Laminate
-"finishings.16" = "Laminate";
-// TRANSLATORS: Staple Top Left
-"finishings.20" = "Staple Top Left";
-// TRANSLATORS: Staple Bottom Left
-"finishings.21" = "Staple Bottom Left";
-// TRANSLATORS: Staple Top Right
-"finishings.22" = "Staple Top Right";
-// TRANSLATORS: Staple Bottom Right
-"finishings.23" = "Staple Bottom Right";
-// TRANSLATORS: Edge Stitch Left
-"finishings.24" = "Edge Stitch Left";
-// TRANSLATORS: Edge Stitch Top
-"finishings.25" = "Edge Stitch Top";
-// TRANSLATORS: Edge Stitch Right
-"finishings.26" = "Edge Stitch Right";
-// TRANSLATORS: Edge Stitch Bottom
-"finishings.27" = "Edge Stitch Bottom";
-// TRANSLATORS: 2 Staples on Left
-"finishings.28" = "2 Staples on Left";
-// TRANSLATORS: 2 Staples on Top
-"finishings.29" = "2 Staples on Top";
-// TRANSLATORS: None
-"finishings.3" = "None";
-// TRANSLATORS: 2 Staples on Right
-"finishings.30" = "2 Staples on Right";
-// TRANSLATORS: 2 Staples on Bottom
-"finishings.31" = "2 Staples on Bottom";
-// TRANSLATORS: 3 Staples on Left
-"finishings.32" = "3 Staples on Left";
-// TRANSLATORS: 3 Staples on Top
-"finishings.33" = "3 Staples on Top";
-// TRANSLATORS: 3 Staples on Right
-"finishings.34" = "3 Staples on Right";
-// TRANSLATORS: 3 Staples on Bottom
-"finishings.35" = "3 Staples on Bottom";
-// TRANSLATORS: Staple
-"finishings.4" = "Staple";
-// TRANSLATORS: Punch
-"finishings.5" = "Punch";
-// TRANSLATORS: Bind Left
-"finishings.50" = "Bind Left";
-// TRANSLATORS: Bind Top
-"finishings.51" = "Bind Top";
-// TRANSLATORS: Bind Right
-"finishings.52" = "Bind Right";
-// TRANSLATORS: Bind Bottom
-"finishings.53" = "Bind Bottom";
-// TRANSLATORS: Cover
-"finishings.6" = "Cover";
-// TRANSLATORS: Trim Pages
-"finishings.60" = "Trim Pages";
-// TRANSLATORS: Trim Documents
-"finishings.61" = "Trim Documents";
-// TRANSLATORS: Trim Copies
-"finishings.62" = "Trim Copies";
-// TRANSLATORS: Trim Job
-"finishings.63" = "Trim Job";
-// TRANSLATORS: Bind
-"finishings.7" = "Bind";
-// TRANSLATORS: Punch Top Left
-"finishings.70" = "Punch Top Left";
-// TRANSLATORS: Punch Bottom Left
-"finishings.71" = "Punch Bottom Left";
-// TRANSLATORS: Punch Top Right
-"finishings.72" = "Punch Top Right";
-// TRANSLATORS: Punch Bottom Right
-"finishings.73" = "Punch Bottom Right";
-// TRANSLATORS: 2-hole Punch Left
-"finishings.74" = "2-hole Punch Left";
-// TRANSLATORS: 2-hole Punch Top
-"finishings.75" = "2-hole Punch Top";
-// TRANSLATORS: 2-hole Punch Right
-"finishings.76" = "2-hole Punch Right";
-// TRANSLATORS: 2-hole Punch Bottom
-"finishings.77" = "2-hole Punch Bottom";
-// TRANSLATORS: 3-hole Punch Left
-"finishings.78" = "3-hole Punch Left";
-// TRANSLATORS: 3-hole Punch Top
-"finishings.79" = "3-hole Punch Top";
-// TRANSLATORS: Saddle Stitch
-"finishings.8" = "Saddle Stitch";
-// TRANSLATORS: 3-hole Punch Right
-"finishings.80" = "3-hole Punch Right";
-// TRANSLATORS: 3-hole Punch Bottom
-"finishings.81" = "3-hole Punch Bottom";
-// TRANSLATORS: 4-hole Punch Left
-"finishings.82" = "4-hole Punch Left";
-// TRANSLATORS: 4-hole Punch Top
-"finishings.83" = "4-hole Punch Top";
-// TRANSLATORS: 4-hole Punch Right
-"finishings.84" = "4-hole Punch Right";
-// TRANSLATORS: 4-hole Punch Bottom
-"finishings.85" = "4-hole Punch Bottom";
-// TRANSLATORS: Multi-hole Punch Left
-"finishings.86" = "Multi-hole Punch Left";
-// TRANSLATORS: Multi-hole Punch Top
-"finishings.87" = "Multi-hole Punch Top";
-// TRANSLATORS: Multi-hole Punch Right
-"finishings.88" = "Multi-hole Punch Right";
-// TRANSLATORS: Multi-hole Punch Bottom
-"finishings.89" = "Multi-hole Punch Bottom";
-// TRANSLATORS: Edge Stitch
-"finishings.9" = "Edge Stitch";
-// TRANSLATORS: Accordion Fold
-"finishings.90" = "Accordion Fold";
-// TRANSLATORS: Double Gate Fold
-"finishings.91" = "Double Gate Fold";
-// TRANSLATORS: Gate Fold
-"finishings.92" = "Gate Fold";
-// TRANSLATORS: Half Fold
-"finishings.93" = "Half Fold";
-// TRANSLATORS: Half Z Fold
-"finishings.94" = "Half Z Fold";
-// TRANSLATORS: Left Gate Fold
-"finishings.95" = "Left Gate Fold";
-// TRANSLATORS: Letter Fold
-"finishings.96" = "Letter Fold";
-// TRANSLATORS: Parallel Fold
-"finishings.97" = "Parallel Fold";
-// TRANSLATORS: Poster Fold
-"finishings.98" = "Poster Fold";
-// TRANSLATORS: Right Gate Fold
-"finishings.99" = "Right Gate Fold";
-// TRANSLATORS: Fold
-"folding" = "Fold";
-// TRANSLATORS: Fold Direction
-"folding-direction" = "Fold Direction";
-// TRANSLATORS: Inward
-"folding-direction.inward" = "Inward";
-// TRANSLATORS: Outward
-"folding-direction.outward" = "Outward";
-// TRANSLATORS: Fold Position
-"folding-offset" = "Fold Position";
-// TRANSLATORS: Fold Edge
-"folding-reference-edge" = "Fold Edge";
-// TRANSLATORS: Bottom
-"folding-reference-edge.bottom" = "Bottom";
-// TRANSLATORS: Left
-"folding-reference-edge.left" = "Left";
-// TRANSLATORS: Right
-"folding-reference-edge.right" = "Right";
-// TRANSLATORS: Top
-"folding-reference-edge.top" = "Top";
-// TRANSLATORS: Font Name
-"font-name-requested" = "Font Name";
-// TRANSLATORS: Font Size
-"font-size-requested" = "Font Size";
-// TRANSLATORS: Force Front Side
-"force-front-side" = "Force Front Side";
-// TRANSLATORS: From Name
-"from-name" = "From Name";
-"held" = "held";
-"help\t\tGet help on commands." = "help\t\tGet help on commands.";
-"idle" = "idle";
-// TRANSLATORS: Imposition Template
-"imposition-template" = "Imposition Template";
-// TRANSLATORS: None
-"imposition-template.none" = "None";
-// TRANSLATORS: Signature
-"imposition-template.signature" = "Signature";
-// TRANSLATORS: Insert Page Number
-"insert-after-page-number" = "Insert Page Number";
-// TRANSLATORS: Insert Count
-"insert-count" = "Insert Count";
-// TRANSLATORS: Insert Sheet
-"insert-sheet" = "Insert Sheet";
-"ippfind: Bad regular expression: %s" = "ippfind: Bad regular expression: %s";
-"ippfind: Cannot use --and after --or." = "ippfind: Cannot use --and after --or.";
-"ippfind: Expected key name after %s." = "ippfind: Expected key name after %s.";
-"ippfind: Expected port range after %s." = "ippfind: Expected port range after %s.";
-"ippfind: Expected program after %s." = "ippfind: Expected program after %s.";
-"ippfind: Expected semi-colon after %s." = "ippfind: Expected semi-colon after %s.";
-"ippfind: Missing close brace in substitution." = "ippfind: Missing close brace in substitution.";
-"ippfind: Missing close parenthesis." = "ippfind: Missing close parenthesis.";
-"ippfind: Missing expression before \"--and\"." = "ippfind: Missing expression before “--and”.";
-"ippfind: Missing expression before \"--or\"." = "ippfind: Missing expression before “--or”.";
-"ippfind: Missing key name after %s." = "ippfind: Missing key name after %s.";
-"ippfind: Missing name after %s." = "ippfind: Missing name after %s.";
-"ippfind: Missing open parenthesis." = "ippfind: Missing open parenthesis.";
-"ippfind: Missing program after %s." = "ippfind: Missing program after %s.";
-"ippfind: Missing regular expression after %s." = "ippfind: Missing regular expression after %s.";
-"ippfind: Missing semi-colon after %s." = "ippfind: Missing semi-colon after %s.";
-"ippfind: Out of memory." = "ippfind: Out of memory.";
-"ippfind: Too many parenthesis." = "ippfind: Too many parenthesis.";
-"ippfind: Unable to execute \"%s\": %s" = "ippfind: Unable to execute “%s”: %s";
-"ippfind: Unknown variable \"{%s}\"." = "ippfind: Unknown variable “{%s}”.";
-"ipptool: \"-i\" and \"-n\" are incompatible with \"--ippserver\", \"-P\", and \"-X\"." = "ipptool: “-i” and “-n” are incompatible with “--ippserver”, “-P”, and “-X”.";
-"ipptool: \"-i\" and \"-n\" are incompatible with \"-P\" and \"-X\"." = "ipptool: “-i” and “-n” are incompatible with “-P” and “-X”.";
-"ipptool: Bad URI \"%s\"." = "ipptool: Bad URI “%s”.";
-"ipptool: Invalid seconds for \"-i\"." = "ipptool: Invalid seconds for “-i”.";
-"ipptool: May only specify a single URI." = "ipptool: May only specify a single URI.";
-"ipptool: Missing count for \"-n\"." = "ipptool: Missing count for “-n”.";
-"ipptool: Missing filename for \"--ippserver\"." = "ipptool: Missing filename for “--ippserver”.";
-"ipptool: Missing filename for \"-f\"." = "ipptool: Missing filename for “-f”.";
-"ipptool: Missing name=value for \"-d\"." = "ipptool: Missing name=value for “-d”.";
-"ipptool: Missing seconds for \"-i\"." = "ipptool: Missing seconds for “-i”.";
-"ipptool: URI required before test file." = "ipptool: URI required before test file.";
-"ipptool: Unable to allocate memory: %s" = "ipptool: Unable to allocate memory: %s";
-// TRANSLATORS: Job Account ID
-"job-account-id" = "Job Account ID";
-// TRANSLATORS: Job Account Type
-"job-account-type" = "Job Account Type";
-// TRANSLATORS: General
-"job-account-type.general" = "General";
-// TRANSLATORS: Group
-"job-account-type.group" = "Group";
-// TRANSLATORS: None
-"job-account-type.none" = "None";
-// TRANSLATORS: Job Accounting Output Bin
-"job-accounting-output-bin" = "Job Accounting Output Bin";
-// TRANSLATORS: Job Accounting Sheets
-"job-accounting-sheets" = "Job Accounting Sheets";
-// TRANSLATORS: Type of Job Accounting Sheets
-"job-accounting-sheets-type" = "Type of Job Accounting Sheets";
-// TRANSLATORS: None
-"job-accounting-sheets-type.none" = "None";
-// TRANSLATORS: Standard
-"job-accounting-sheets-type.standard" = "Standard";
-// TRANSLATORS: Job Accounting User ID
-"job-accounting-user-id" = "Job Accounting User ID";
-// TRANSLATORS: Job Cancel After
-"job-cancel-after" = "Cancel job after";
-// TRANSLATORS: Copies
-"job-copies" = "Copies";
-// TRANSLATORS: Back Cover
-"job-cover-back" = "Back Cover";
-// TRANSLATORS: Front Cover
-"job-cover-front" = "Front Cover";
-// TRANSLATORS: Delay Output Until
-"job-delay-output-until" = "Delay Output Until";
-// TRANSLATORS: Delay Output Until
-"job-delay-output-until-time" = "Delay Output Until";
-// TRANSLATORS: Daytime
-"job-delay-output-until.day-time" = "Daytime";
-// TRANSLATORS: Evening
-"job-delay-output-until.evening" = "Evening";
-// TRANSLATORS: Released
-"job-delay-output-until.indefinite" = "Released";
-// TRANSLATORS: Night
-"job-delay-output-until.night" = "Night";
-// TRANSLATORS: No Delay
-"job-delay-output-until.no-delay-output" = "No Delay";
-// TRANSLATORS: Second Shift
-"job-delay-output-until.second-shift" = "Second Shift";
-// TRANSLATORS: Third Shift
-"job-delay-output-until.third-shift" = "Third Shift";
-// TRANSLATORS: Weekend
-"job-delay-output-until.weekend" = "Weekend";
-// TRANSLATORS: On Error
-"job-error-action" = "On Error";
-// TRANSLATORS: Abort Job
-"job-error-action.abort-job" = "Abort Job";
-// TRANSLATORS: Cancel Job
-"job-error-action.cancel-job" = "Cancel Job";
-// TRANSLATORS: Continue Job
-"job-error-action.continue-job" = "Continue Job";
-// TRANSLATORS: Suspend Job
-"job-error-action.suspend-job" = "Suspend Job";
-// TRANSLATORS: Print Error Sheet
-"job-error-sheet" = "Print Error Sheet";
-// TRANSLATORS: Type of Error Sheet
-"job-error-sheet-type" = "Type of Error Sheet";
-// TRANSLATORS: None
-"job-error-sheet-type.none" = "None";
-// TRANSLATORS: Standard
-"job-error-sheet-type.standard" = "Standard";
-// TRANSLATORS: Print Error Sheet
-"job-error-sheet-when" = "Print Error Sheet";
-// TRANSLATORS: Always
-"job-error-sheet-when.always" = "Always";
-// TRANSLATORS: On Error
-"job-error-sheet-when.on-error" = "On Error";
-// TRANSLATORS: Job Finishings
-"job-finishings" = "Job Finishings";
-// TRANSLATORS: Hold Until
-"job-hold-until" = "Hold Until";
-// TRANSLATORS: Hold Until
-"job-hold-until-time" = "Hold Until";
-// TRANSLATORS: Daytime
-"job-hold-until.day-time" = "Daytime";
-// TRANSLATORS: Evening
-"job-hold-until.evening" = "Evening";
-// TRANSLATORS: Released
-"job-hold-until.indefinite" = "Released";
-// TRANSLATORS: Night
-"job-hold-until.night" = "Night";
-// TRANSLATORS: No Hold
-"job-hold-until.no-hold" = "No Hold";
-// TRANSLATORS: Second Shift
-"job-hold-until.second-shift" = "Second Shift";
-// TRANSLATORS: Third Shift
-"job-hold-until.third-shift" = "Third Shift";
-// TRANSLATORS: Weekend
-"job-hold-until.weekend" = "Weekend";
-// TRANSLATORS: Job Mandatory Attributes
-"job-mandatory-attributes" = "Job Mandatory Attributes";
-// TRANSLATORS: Title
-"job-name" = "Title";
-// TRANSLATORS: Job Pages
-"job-pages" = "Job Pages";
-// TRANSLATORS: Job Pages
-"job-pages-col" = "Job Pages";
-// TRANSLATORS: Job Phone Number
-"job-phone-number" = "Job Phone Number";
-"job-printer-uri attribute missing." = "job-printer-uri attribute missing.";
-// TRANSLATORS: Job Priority
-"job-priority" = "Job Priority";
-// TRANSLATORS: Job Privacy Attributes
-"job-privacy-attributes" = "Job Privacy Attributes";
-// TRANSLATORS: All
-"job-privacy-attributes.all" = "All";
-// TRANSLATORS: Default
-"job-privacy-attributes.default" = "Default";
-// TRANSLATORS: Job Description
-"job-privacy-attributes.job-description" = "Job Description";
-// TRANSLATORS: Job Template
-"job-privacy-attributes.job-template" = "Job Template";
-// TRANSLATORS: None
-"job-privacy-attributes.none" = "None";
-// TRANSLATORS: Job Privacy Scope
-"job-privacy-scope" = "Job Privacy Scope";
-// TRANSLATORS: All
-"job-privacy-scope.all" = "All";
-// TRANSLATORS: Default
-"job-privacy-scope.default" = "Default";
-// TRANSLATORS: None
-"job-privacy-scope.none" = "None";
-// TRANSLATORS: Owner
-"job-privacy-scope.owner" = "Owner";
-// TRANSLATORS: Job Recipient Name
-"job-recipient-name" = "Job Recipient Name";
-// TRANSLATORS: Job Retain Until
-"job-retain-until" = "Retain job until";
-// TRANSLATORS: Job Retain Until Interval
-"job-retain-until-interval" = "Retain job until interval";
-// TRANSLATORS: Job Retain Until Time
-"job-retain-until-time" = "Retain job until time";
-// TRANSLATORS: End Of Day
-"job-retain-until.end-of-day" = "End of day";
-// TRANSLATORS: End Of Month
-"job-retain-until.end-of-month" = "End of month";
-// TRANSLATORS: End Of Week
-"job-retain-until.end-of-week" = "End of week";
-// TRANSLATORS: Indefinite
-"job-retain-until.indefinite" = "Indefinitely";
-// TRANSLATORS: None
-"job-retain-until.none" = "Never";
-// TRANSLATORS: Job Save Disposition
-"job-save-disposition" = "Job Save Disposition";
-// TRANSLATORS: Job Sheet Message
-"job-sheet-message" = "Job Sheet Message";
-// TRANSLATORS: Banner Page
-"job-sheets" = "Banner Page";
-// TRANSLATORS: Banner Page
-"job-sheets-col" = "Banner Page";
-// TRANSLATORS: First Page in Document
-"job-sheets.first-print-stream-page" = "First Page in Document";
-// TRANSLATORS: Start and End Sheets
-"job-sheets.job-both-sheet" = "Start and End Sheets";
-// TRANSLATORS: End Sheet
-"job-sheets.job-end-sheet" = "End Sheet";
-// TRANSLATORS: Start Sheet
-"job-sheets.job-start-sheet" = "Start Sheet";
-// TRANSLATORS: None
-"job-sheets.none" = "None";
-// TRANSLATORS: Standard
-"job-sheets.standard" = "Standard";
-// TRANSLATORS: Job State
-"job-state" = "Job State";
-// TRANSLATORS: Job State Message
-"job-state-message" = "Job State Message";
-// TRANSLATORS: Detailed Job State
-"job-state-reasons" = "Detailed Job State";
-// TRANSLATORS: Stopping
-"job-state-reasons.aborted-by-system" = "Aborted By System";
-// TRANSLATORS: Account Authorization Failed
-"job-state-reasons.account-authorization-failed" = "Account Authorization Failed";
-// TRANSLATORS: Account Closed
-"job-state-reasons.account-closed" = "Account Closed";
-// TRANSLATORS: Account Info Needed
-"job-state-reasons.account-info-needed" = "Account Info Needed";
-// TRANSLATORS: Account Limit Reached
-"job-state-reasons.account-limit-reached" = "Account Limit Reached";
-// TRANSLATORS: Decompression error
-"job-state-reasons.compression-error" = "Compression Error";
-// TRANSLATORS: Conflicting Attributes
-"job-state-reasons.conflicting-attributes" = "Conflicting Attributes";
-// TRANSLATORS: Connected To Destination
-"job-state-reasons.connected-to-destination" = "Connected To Destination";
-// TRANSLATORS: Connecting To Destination
-"job-state-reasons.connecting-to-destination" = "Connecting To Destination";
-// TRANSLATORS: Destination Uri Failed
-"job-state-reasons.destination-uri-failed" = "Destination Uri Failed";
-// TRANSLATORS: Digital Signature Did Not Verify
-"job-state-reasons.digital-signature-did-not-verify" = "Digital Signature Did Not Verify";
-// TRANSLATORS: Digital Signature Type Not Supported
-"job-state-reasons.digital-signature-type-not-supported" = "Digital Signature Type Not Supported";
-// TRANSLATORS: Document Access Error
-"job-state-reasons.document-access-error" = "Document Access Error";
-// TRANSLATORS: Document Format Error
-"job-state-reasons.document-format-error" = "Document Format Error";
-// TRANSLATORS: Document Password Error
-"job-state-reasons.document-password-error" = "Document Password Error";
-// TRANSLATORS: Document Permission Error
-"job-state-reasons.document-permission-error" = "Document Permission Error";
-// TRANSLATORS: Document Security Error
-"job-state-reasons.document-security-error" = "Document Security Error";
-// TRANSLATORS: Document Unprintable Error
-"job-state-reasons.document-unprintable-error" = "Document Unprintable Error";
-// TRANSLATORS: Errors Detected
-"job-state-reasons.errors-detected" = "Errors Detected";
-// TRANSLATORS: Canceled at printer
-"job-state-reasons.job-canceled-at-device" = "Job Canceled At Device";
-// TRANSLATORS: Canceled by operator
-"job-state-reasons.job-canceled-by-operator" = "Job Canceled By Operator";
-// TRANSLATORS: Canceled by user
-"job-state-reasons.job-canceled-by-user" = "Job Canceled By User";
-// TRANSLATORS:
-"job-state-reasons.job-completed-successfully" = "Job Completed Successfully";
-// TRANSLATORS: Completed with errors
-"job-state-reasons.job-completed-with-errors" = "Job Completed With Errors";
-// TRANSLATORS: Completed with warnings
-"job-state-reasons.job-completed-with-warnings" = "Job Completed With Warnings";
-// TRANSLATORS: Insufficient data
-"job-state-reasons.job-data-insufficient" = "Job Data Insufficient";
-// TRANSLATORS: Job Delay Output Until Specified
-"job-state-reasons.job-delay-output-until-specified" = "Job Delay Output Until Specified";
-// TRANSLATORS: Job Digital Signature Wait
-"job-state-reasons.job-digital-signature-wait" = "Job Digital Signature Wait";
-// TRANSLATORS: Job Fetchable
-"job-state-reasons.job-fetchable" = "Job Fetchable";
-// TRANSLATORS: Job Held For Review
-"job-state-reasons.job-held-for-review" = "Job Held For Review";
-// TRANSLATORS: Job held
-"job-state-reasons.job-hold-until-specified" = "Job Hold Until Specified";
-// TRANSLATORS: Incoming
-"job-state-reasons.job-incoming" = "Job Incoming";
-// TRANSLATORS: Interpreting
-"job-state-reasons.job-interpreting" = "Job Interpreting";
-// TRANSLATORS: Outgoing
-"job-state-reasons.job-outgoing" = "Job Outgoing";
-// TRANSLATORS: Job Password Wait
-"job-state-reasons.job-password-wait" = "Job Password Wait";
-// TRANSLATORS: Job Printed Successfully
-"job-state-reasons.job-printed-successfully" = "Job Printed Successfully";
-// TRANSLATORS: Job Printed With Errors
-"job-state-reasons.job-printed-with-errors" = "Job Printed With Errors";
-// TRANSLATORS: Job Printed With Warnings
-"job-state-reasons.job-printed-with-warnings" = "Job Printed With Warnings";
-// TRANSLATORS: Printing
-"job-state-reasons.job-printing" = "Job Printing";
-// TRANSLATORS: Preparing to print
-"job-state-reasons.job-queued" = "Job Queued";
-// TRANSLATORS: Processing document
-"job-state-reasons.job-queued-for-marker" = "Job Queued For Marker";
-// TRANSLATORS: Job Release Wait
-"job-state-reasons.job-release-wait" = "Job Release Wait";
-// TRANSLATORS: Restartable
-"job-state-reasons.job-restartable" = "Job Restartable";
-// TRANSLATORS: Job Resuming
-"job-state-reasons.job-resuming" = "Job Resuming";
-// TRANSLATORS: Job Saved Successfully
-"job-state-reasons.job-saved-successfully" = "Job Saved Successfully";
-// TRANSLATORS: Job Saved With Errors
-"job-state-reasons.job-saved-with-errors" = "Job Saved With Errors";
-// TRANSLATORS: Job Saved With Warnings
-"job-state-reasons.job-saved-with-warnings" = "Job Saved With Warnings";
-// TRANSLATORS: Job Saving
-"job-state-reasons.job-saving" = "Job Saving";
-// TRANSLATORS: Job Spooling
-"job-state-reasons.job-spooling" = "Job Spooling";
-// TRANSLATORS: Job Streaming
-"job-state-reasons.job-streaming" = "Job Streaming";
-// TRANSLATORS: Suspended
-"job-state-reasons.job-suspended" = "Job Suspended";
-// TRANSLATORS: Job Suspended By Operator
-"job-state-reasons.job-suspended-by-operator" = "Job Suspended By Operator";
-// TRANSLATORS: Job Suspended By System
-"job-state-reasons.job-suspended-by-system" = "Job Suspended By System";
-// TRANSLATORS: Job Suspended By User
-"job-state-reasons.job-suspended-by-user" = "Job Suspended By User";
-// TRANSLATORS: Job Suspending
-"job-state-reasons.job-suspending" = "Job Suspending";
-// TRANSLATORS: Job Transferring
-"job-state-reasons.job-transferring" = "Job Transferring";
-// TRANSLATORS: Transforming
-"job-state-reasons.job-transforming" = "Job Transforming";
-// TRANSLATORS: None
-"job-state-reasons.none" = "None";
-// TRANSLATORS: Printer offline
-"job-state-reasons.printer-stopped" = "Printer Stopped";
-// TRANSLATORS: Printer partially stopped
-"job-state-reasons.printer-stopped-partly" = "Printer Stopped Partly";
-// TRANSLATORS: Stopping
-"job-state-reasons.processing-to-stop-point" = "Processing To Stop Point";
-// TRANSLATORS: Ready
-"job-state-reasons.queued-in-device" = "Queued In Device";
-// TRANSLATORS: Resources Are Not Ready
-"job-state-reasons.resources-are-not-ready" = "Resources Are Not Ready";
-// TRANSLATORS: Resources Are Not Supported
-"job-state-reasons.resources-are-not-supported" = "Resources Are Not Supported";
-// TRANSLATORS: Service offline
-"job-state-reasons.service-off-line" = "Service Off Line";
-// TRANSLATORS: Submission Interrupted
-"job-state-reasons.submission-interrupted" = "Submission Interrupted";
-// TRANSLATORS: Unsupported Attributes Or Values
-"job-state-reasons.unsupported-attributes-or-values" = "Unsupported Attributes Or Values";
-// TRANSLATORS: Unsupported Compression
-"job-state-reasons.unsupported-compression" = "Unsupported Compression";
-// TRANSLATORS: Unsupported Document Format
-"job-state-reasons.unsupported-document-format" = "Unsupported Document Format";
-// TRANSLATORS: Waiting For User Action
-"job-state-reasons.waiting-for-user-action" = "Waiting For User Action";
-// TRANSLATORS: Warnings Detected
-"job-state-reasons.warnings-detected" = "Warnings Detected";
-// TRANSLATORS: Pending
-"job-state.3" = "Pending";
-// TRANSLATORS: Held
-"job-state.4" = "Held";
-// TRANSLATORS: Processing
-"job-state.5" = "Processing";
-// TRANSLATORS: Stopped
-"job-state.6" = "Stopped";
-// TRANSLATORS: Canceled
-"job-state.7" = "Canceled";
-// TRANSLATORS: Aborted
-"job-state.8" = "Aborted";
-// TRANSLATORS: Completed
-"job-state.9" = "Completed";
-// TRANSLATORS: Laminate Pages
-"laminating" = "Laminate Pages";
-// TRANSLATORS: Laminate
-"laminating-sides" = "Laminate";
-// TRANSLATORS: Back Only
-"laminating-sides.back" = "Back Only";
-// TRANSLATORS: Front and Back
-"laminating-sides.both" = "Front and Back";
-// TRANSLATORS: Front Only
-"laminating-sides.front" = "Front Only";
-// TRANSLATORS: Type of Lamination
-"laminating-type" = "Type of Lamination";
-// TRANSLATORS: Archival
-"laminating-type.archival" = "Archival";
-// TRANSLATORS: Glossy
-"laminating-type.glossy" = "Glossy";
-// TRANSLATORS: High Gloss
-"laminating-type.high-gloss" = "High Gloss";
-// TRANSLATORS: Matte
-"laminating-type.matte" = "Matte";
-// TRANSLATORS: Semi-gloss
-"laminating-type.semi-gloss" = "Semi-gloss";
-// TRANSLATORS: Translucent
-"laminating-type.translucent" = "Translucent";
-// TRANSLATORS: Logo
-"logo" = "Logo";
-"lpadmin: Class name can only contain printable characters." = "lpadmin: Class name can only contain printable characters.";
-"lpadmin: Expected PPD after \"-%c\" option." = "lpadmin: Expected PPD after “-%c” option.";
-"lpadmin: Expected allow/deny:userlist after \"-u\" option." = "lpadmin: Expected allow/deny:userlist after “-u” option.";
-"lpadmin: Expected class after \"-r\" option." = "lpadmin: Expected class after “-r” option.";
-"lpadmin: Expected class name after \"-c\" option." = "lpadmin: Expected class name after “-c” option.";
-"lpadmin: Expected description after \"-D\" option." = "lpadmin: Expected description after “-D” option.";
-"lpadmin: Expected device URI after \"-v\" option." = "lpadmin: Expected device URI after “-v” option.";
-"lpadmin: Expected file type(s) after \"-I\" option." = "lpadmin: Expected file type(s) after “-I” option.";
-"lpadmin: Expected hostname after \"-h\" option." = "lpadmin: Expected hostname after “-h” option.";
-"lpadmin: Expected location after \"-L\" option." = "lpadmin: Expected location after “-L” option.";
-"lpadmin: Expected model after \"-m\" option." = "lpadmin: Expected model after “-m” option.";
-"lpadmin: Expected name after \"-R\" option." = "lpadmin: Expected name after “-R” option.";
-"lpadmin: Expected name=value after \"-o\" option." = "lpadmin: Expected name=value after “-o” option.";
-"lpadmin: Expected printer after \"-p\" option." = "lpadmin: Expected printer after “-p” option.";
-"lpadmin: Expected printer name after \"-d\" option." = "lpadmin: Expected printer name after “-d” option.";
-"lpadmin: Expected printer or class after \"-x\" option." = "lpadmin: Expected printer or class after “-x” option.";
-"lpadmin: No member names were seen." = "lpadmin: No member names were seen.";
-"lpadmin: Printer %s is already a member of class %s." = "lpadmin: Printer %s is already a member of class %s.";
-"lpadmin: Printer %s is not a member of class %s." = "lpadmin: Printer %s is not a member of class %s.";
-"lpadmin: Printer drivers are deprecated and will stop working in a future version of CUPS." = "lpadmin: Printer drivers are deprecated and will stop working in a future version of CUPS.";
-"lpadmin: Printer name can only contain printable characters." = "lpadmin: Printer name can only contain printable characters.";
-"lpadmin: Raw queues are deprecated and will stop working in a future version of CUPS." = "lpadmin: Raw queues are deprecated and will stop working in a future version of CUPS.";
-"lpadmin: Raw queues are no longer supported on macOS." = "lpadmin: Raw queues are no longer supported on macOS.";
-"lpadmin: System V interface scripts are no longer supported for security reasons." = "lpadmin: System V interface scripts are no longer supported for security reasons.";
-"lpadmin: Unable to add a printer to the class:\n You must specify a printer name first." = "lpadmin: Unable to add a printer to the class:\n You must specify a printer name first.";
-"lpadmin: Unable to connect to server: %s" = "lpadmin: Unable to connect to server: %s";
-"lpadmin: Unable to create temporary file" = "lpadmin: Unable to create temporary file";
-"lpadmin: Unable to delete option:\n You must specify a printer name first." = "lpadmin: Unable to delete option:\n You must specify a printer name first.";
-"lpadmin: Unable to open PPD \"%s\": %s" = "lpadmin: Unable to open PPD “%s”: %s";
-"lpadmin: Unable to open PPD \"%s\": %s on line %d." = "lpadmin: Unable to open PPD “%s”: %s on line %d.";
-"lpadmin: Unable to remove a printer from the class:\n You must specify a printer name first." = "lpadmin: Unable to remove a printer from the class:\n You must specify a printer name first.";
-"lpadmin: Unable to set the printer options:\n You must specify a printer name first." = "lpadmin: Unable to set the printer options:\n You must specify a printer name first.";
-"lpadmin: Unknown allow/deny option \"%s\"." = "lpadmin: Unknown allow/deny option “%s”.";
-"lpadmin: Unknown argument \"%s\"." = "lpadmin: Unknown argument “%s”.";
-"lpadmin: Unknown option \"%c\"." = "lpadmin: Unknown option “%c”.";
-"lpadmin: Use the 'everywhere' model for shared printers." = "lpadmin: Use the ‘everywhere’ model for shared printers.";
-"lpadmin: Warning - content type list ignored." = "lpadmin: Warning - content type list ignored.";
-"lpc> " = "lpc> ";
-"lpinfo: Expected 1284 device ID string after \"--device-id\"." = "lpinfo: Expected 1284 device ID string after “--device-id”.";
-"lpinfo: Expected language after \"--language\"." = "lpinfo: Expected language after “--language”.";
-"lpinfo: Expected make and model after \"--make-and-model\"." = "lpinfo: Expected make and model after “--make-and-model”.";
-"lpinfo: Expected product string after \"--product\"." = "lpinfo: Expected product string after “--product”.";
-"lpinfo: Expected scheme list after \"--exclude-schemes\"." = "lpinfo: Expected scheme list after “--exclude-schemes”.";
-"lpinfo: Expected scheme list after \"--include-schemes\"." = "lpinfo: Expected scheme list after “--include-schemes”.";
-"lpinfo: Expected timeout after \"--timeout\"." = "lpinfo: Expected timeout after “--timeout”.";
-"lpmove: Unable to connect to server: %s" = "lpmove: Unable to connect to server: %s";
-"lpmove: Unknown argument \"%s\"." = "lpmove: Unknown argument “%s”.";
-"lpoptions: No printers." = "lpoptions: No printers.";
-"lpoptions: Unable to add printer or instance: %s" = "lpoptions: Unable to add printer or instance: %s";
-"lpoptions: Unable to get PPD file for %s: %s" = "lpoptions: Unable to get PPD file for %s: %s";
-"lpoptions: Unable to open PPD file for %s." = "lpoptions: Unable to open PPD file for %s.";
-"lpoptions: Unknown printer or class." = "lpoptions: Unknown printer or class.";
-"lpstat: error - %s environment variable names non-existent destination \"%s\"." = "lpstat: error - %s environment variable names non-existent destination \"%s\".";
-// TRANSLATORS: Amount of Material
-"material-amount" = "Amount of Material";
-// TRANSLATORS: Amount Units
-"material-amount-units" = "Amount Units";
-// TRANSLATORS: Grams
-"material-amount-units.g" = "Grams";
-// TRANSLATORS: Kilograms
-"material-amount-units.kg" = "Kilograms";
-// TRANSLATORS: Liters
-"material-amount-units.l" = "Liters";
-// TRANSLATORS: Meters
-"material-amount-units.m" = "Meters";
-// TRANSLATORS: Milliliters
-"material-amount-units.ml" = "Milliliters";
-// TRANSLATORS: Millimeters
-"material-amount-units.mm" = "Millimeters";
-// TRANSLATORS: Material Color
-"material-color" = "Material Color";
-// TRANSLATORS: Material Diameter
-"material-diameter" = "Material Diameter";
-// TRANSLATORS: Material Diameter Tolerance
-"material-diameter-tolerance" = "Material Diameter Tolerance";
-// TRANSLATORS: Material Fill Density
-"material-fill-density" = "Material Fill Density";
-// TRANSLATORS: Material Name
-"material-name" = "Material Name";
-// TRANSLATORS: Material Nozzle Diameter
-"material-nozzle-diameter" = "Material Nozzle Diameter";
-// TRANSLATORS: Use Material For
-"material-purpose" = "Use Material For";
-// TRANSLATORS: Everything
-"material-purpose.all" = "Everything";
-// TRANSLATORS: Base
-"material-purpose.base" = "Base";
-// TRANSLATORS: In-fill
-"material-purpose.in-fill" = "In-fill";
-// TRANSLATORS: Shell
-"material-purpose.shell" = "Shell";
-// TRANSLATORS: Supports
-"material-purpose.support" = "Supports";
-// TRANSLATORS: Feed Rate
-"material-rate" = "Feed Rate";
-// TRANSLATORS: Feed Rate Units
-"material-rate-units" = "Feed Rate Units";
-// TRANSLATORS: Milligrams per second
-"material-rate-units.mg_second" = "Milligrams per second";
-// TRANSLATORS: Milliliters per second
-"material-rate-units.ml_second" = "Milliliters per second";
-// TRANSLATORS: Millimeters per second
-"material-rate-units.mm_second" = "Millimeters per second";
-// TRANSLATORS: Material Retraction
-"material-retraction" = "Material Retraction";
-// TRANSLATORS: Material Shell Thickness
-"material-shell-thickness" = "Material Shell Thickness";
-// TRANSLATORS: Material Temperature
-"material-temperature" = "Material Temperature";
-// TRANSLATORS: Material Type
-"material-type" = "Material Type";
-// TRANSLATORS: ABS
-"material-type.abs" = "ABS";
-// TRANSLATORS: Carbon Fiber ABS
-"material-type.abs-carbon-fiber" = "Carbon Fiber ABS";
-// TRANSLATORS: Carbon Nanotube ABS
-"material-type.abs-carbon-nanotube" = "Carbon Nanotube ABS";
-// TRANSLATORS: Chocolate
-"material-type.chocolate" = "Chocolate";
-// TRANSLATORS: Gold
-"material-type.gold" = "Gold";
-// TRANSLATORS: Nylon
-"material-type.nylon" = "Nylon";
-// TRANSLATORS: Pet
-"material-type.pet" = "Pet";
-// TRANSLATORS: Photopolymer
-"material-type.photopolymer" = "Photopolymer";
-// TRANSLATORS: PLA
-"material-type.pla" = "PLA";
-// TRANSLATORS: Conductive PLA
-"material-type.pla-conductive" = "Conductive PLA";
-// TRANSLATORS: Pla Dissolvable
-"material-type.pla-dissolvable" = "Pla Dissolvable";
-// TRANSLATORS: Flexible PLA
-"material-type.pla-flexible" = "Flexible PLA";
-// TRANSLATORS: Magnetic PLA
-"material-type.pla-magnetic" = "Magnetic PLA";
-// TRANSLATORS: Steel PLA
-"material-type.pla-steel" = "Steel PLA";
-// TRANSLATORS: Stone PLA
-"material-type.pla-stone" = "Stone PLA";
-// TRANSLATORS: Wood PLA
-"material-type.pla-wood" = "Wood PLA";
-// TRANSLATORS: Polycarbonate
-"material-type.polycarbonate" = "Polycarbonate";
-// TRANSLATORS: Dissolvable PVA
-"material-type.pva-dissolvable" = "Dissolvable PVA";
-// TRANSLATORS: Silver
-"material-type.silver" = "Silver";
-// TRANSLATORS: Titanium
-"material-type.titanium" = "Titanium";
-// TRANSLATORS: Wax
-"material-type.wax" = "Wax";
-// TRANSLATORS: Materials
-"materials-col" = "Materials";
-// TRANSLATORS: Media
-"media" = "Media";
-// TRANSLATORS: Back Coating of Media
-"media-back-coating" = "Back Coating of Media";
-// TRANSLATORS: Glossy
-"media-back-coating.glossy" = "Glossy";
-// TRANSLATORS: High Gloss
-"media-back-coating.high-gloss" = "High Gloss";
-// TRANSLATORS: Matte
-"media-back-coating.matte" = "Matte";
-// TRANSLATORS: None
-"media-back-coating.none" = "None";
-// TRANSLATORS: Satin
-"media-back-coating.satin" = "Satin";
-// TRANSLATORS: Semi-gloss
-"media-back-coating.semi-gloss" = "Semi-gloss";
-// TRANSLATORS: Media Bottom Margin
-"media-bottom-margin" = "Media Bottom Margin";
-// TRANSLATORS: Media
-"media-col" = "Media";
-// TRANSLATORS: Media Color
-"media-color" = "Media Color";
-// TRANSLATORS: Black
-"media-color.black" = "Black";
-// TRANSLATORS: Blue
-"media-color.blue" = "Blue";
-// TRANSLATORS: Brown
-"media-color.brown" = "Brown";
-// TRANSLATORS: Buff
-"media-color.buff" = "Buff";
-// TRANSLATORS: Clear Black
-"media-color.clear-black" = "Clear Black";
-// TRANSLATORS: Clear Blue
-"media-color.clear-blue" = "Clear Blue";
-// TRANSLATORS: Clear Brown
-"media-color.clear-brown" = "Clear Brown";
-// TRANSLATORS: Clear Buff
-"media-color.clear-buff" = "Clear Buff";
-// TRANSLATORS: Clear Cyan
-"media-color.clear-cyan" = "Clear Cyan";
-// TRANSLATORS: Clear Gold
-"media-color.clear-gold" = "Clear Gold";
-// TRANSLATORS: Clear Goldenrod
-"media-color.clear-goldenrod" = "Clear Goldenrod";
-// TRANSLATORS: Clear Gray
-"media-color.clear-gray" = "Clear Gray";
-// TRANSLATORS: Clear Green
-"media-color.clear-green" = "Clear Green";
-// TRANSLATORS: Clear Ivory
-"media-color.clear-ivory" = "Clear Ivory";
-// TRANSLATORS: Clear Magenta
-"media-color.clear-magenta" = "Clear Magenta";
-// TRANSLATORS: Clear Multi Color
-"media-color.clear-multi-color" = "Clear Multi Color";
-// TRANSLATORS: Clear Mustard
-"media-color.clear-mustard" = "Clear Mustard";
-// TRANSLATORS: Clear Orange
-"media-color.clear-orange" = "Clear Orange";
-// TRANSLATORS: Clear Pink
-"media-color.clear-pink" = "Clear Pink";
-// TRANSLATORS: Clear Red
-"media-color.clear-red" = "Clear Red";
-// TRANSLATORS: Clear Silver
-"media-color.clear-silver" = "Clear Silver";
-// TRANSLATORS: Clear Turquoise
-"media-color.clear-turquoise" = "Clear Turquoise";
-// TRANSLATORS: Clear Violet
-"media-color.clear-violet" = "Clear Violet";
-// TRANSLATORS: Clear White
-"media-color.clear-white" = "Clear White";
-// TRANSLATORS: Clear Yellow
-"media-color.clear-yellow" = "Clear Yellow";
-// TRANSLATORS: Cyan
-"media-color.cyan" = "Cyan";
-// TRANSLATORS: Dark Blue
-"media-color.dark-blue" = "Dark Blue";
-// TRANSLATORS: Dark Brown
-"media-color.dark-brown" = "Dark Brown";
-// TRANSLATORS: Dark Buff
-"media-color.dark-buff" = "Dark Buff";
-// TRANSLATORS: Dark Cyan
-"media-color.dark-cyan" = "Dark Cyan";
-// TRANSLATORS: Dark Gold
-"media-color.dark-gold" = "Dark Gold";
-// TRANSLATORS: Dark Goldenrod
-"media-color.dark-goldenrod" = "Dark Goldenrod";
-// TRANSLATORS: Dark Gray
-"media-color.dark-gray" = "Dark Gray";
-// TRANSLATORS: Dark Green
-"media-color.dark-green" = "Dark Green";
-// TRANSLATORS: Dark Ivory
-"media-color.dark-ivory" = "Dark Ivory";
-// TRANSLATORS: Dark Magenta
-"media-color.dark-magenta" = "Dark Magenta";
-// TRANSLATORS: Dark Mustard
-"media-color.dark-mustard" = "Dark Mustard";
-// TRANSLATORS: Dark Orange
-"media-color.dark-orange" = "Dark Orange";
-// TRANSLATORS: Dark Pink
-"media-color.dark-pink" = "Dark Pink";
-// TRANSLATORS: Dark Red
-"media-color.dark-red" = "Dark Red";
-// TRANSLATORS: Dark Silver
-"media-color.dark-silver" = "Dark Silver";
-// TRANSLATORS: Dark Turquoise
-"media-color.dark-turquoise" = "Dark Turquoise";
-// TRANSLATORS: Dark Violet
-"media-color.dark-violet" = "Dark Violet";
-// TRANSLATORS: Dark Yellow
-"media-color.dark-yellow" = "Dark Yellow";
-// TRANSLATORS: Gold
-"media-color.gold" = "Gold";
-// TRANSLATORS: Goldenrod
-"media-color.goldenrod" = "Goldenrod";
-// TRANSLATORS: Gray
-"media-color.gray" = "Gray";
-// TRANSLATORS: Green
-"media-color.green" = "Green";
-// TRANSLATORS: Ivory
-"media-color.ivory" = "Ivory";
-// TRANSLATORS: Light Black
-"media-color.light-black" = "Light Black";
-// TRANSLATORS: Light Blue
-"media-color.light-blue" = "Light Blue";
-// TRANSLATORS: Light Brown
-"media-color.light-brown" = "Light Brown";
-// TRANSLATORS: Light Buff
-"media-color.light-buff" = "Light Buff";
-// TRANSLATORS: Light Cyan
-"media-color.light-cyan" = "Light Cyan";
-// TRANSLATORS: Light Gold
-"media-color.light-gold" = "Light Gold";
-// TRANSLATORS: Light Goldenrod
-"media-color.light-goldenrod" = "Light Goldenrod";
-// TRANSLATORS: Light Gray
-"media-color.light-gray" = "Light Gray";
-// TRANSLATORS: Light Green
-"media-color.light-green" = "Light Green";
-// TRANSLATORS: Light Ivory
-"media-color.light-ivory" = "Light Ivory";
-// TRANSLATORS: Light Magenta
-"media-color.light-magenta" = "Light Magenta";
-// TRANSLATORS: Light Mustard
-"media-color.light-mustard" = "Light Mustard";
-// TRANSLATORS: Light Orange
-"media-color.light-orange" = "Light Orange";
-// TRANSLATORS: Light Pink
-"media-color.light-pink" = "Light Pink";
-// TRANSLATORS: Light Red
-"media-color.light-red" = "Light Red";
-// TRANSLATORS: Light Silver
-"media-color.light-silver" = "Light Silver";
-// TRANSLATORS: Light Turquoise
-"media-color.light-turquoise" = "Light Turquoise";
-// TRANSLATORS: Light Violet
-"media-color.light-violet" = "Light Violet";
-// TRANSLATORS: Light Yellow
-"media-color.light-yellow" = "Light Yellow";
-// TRANSLATORS: Magenta
-"media-color.magenta" = "Magenta";
-// TRANSLATORS: Multi-color
-"media-color.multi-color" = "Multi-color";
-// TRANSLATORS: Mustard
-"media-color.mustard" = "Mustard";
-// TRANSLATORS: No Color
-"media-color.no-color" = "No Color";
-// TRANSLATORS: Orange
-"media-color.orange" = "Orange";
-// TRANSLATORS: Pink
-"media-color.pink" = "Pink";
-// TRANSLATORS: Red
-"media-color.red" = "Red";
-// TRANSLATORS: Silver
-"media-color.silver" = "Silver";
-// TRANSLATORS: Turquoise
-"media-color.turquoise" = "Turquoise";
-// TRANSLATORS: Violet
-"media-color.violet" = "Violet";
-// TRANSLATORS: White
-"media-color.white" = "White";
-// TRANSLATORS: Yellow
-"media-color.yellow" = "Yellow";
-// TRANSLATORS: Front Coating of Media
-"media-front-coating" = "Front Coating of Media";
-// TRANSLATORS: Media Grain
-"media-grain" = "Media Grain";
-// TRANSLATORS: Cross-Feed Direction
-"media-grain.x-direction" = "Cross-Feed Direction";
-// TRANSLATORS: Feed Direction
-"media-grain.y-direction" = "Feed Direction";
-// TRANSLATORS: Media Hole Count
-"media-hole-count" = "Media Hole Count";
-// TRANSLATORS: Media Info
-"media-info" = "Media Info";
-// TRANSLATORS: Force Media
-"media-input-tray-check" = "Force Media";
-// TRANSLATORS: Media Left Margin
-"media-left-margin" = "Media Left Margin";
-// TRANSLATORS: Pre-printed Media
-"media-pre-printed" = "Pre-printed Media";
-// TRANSLATORS: Blank
-"media-pre-printed.blank" = "Blank";
-// TRANSLATORS: Letterhead
-"media-pre-printed.letter-head" = "Letterhead";
-// TRANSLATORS: Pre-printed
-"media-pre-printed.pre-printed" = "Pre-printed";
-// TRANSLATORS: Recycled Media
-"media-recycled" = "Recycled Media";
-// TRANSLATORS: None
-"media-recycled.none" = "None";
-// TRANSLATORS: Standard
-"media-recycled.standard" = "Standard";
-// TRANSLATORS: Media Right Margin
-"media-right-margin" = "Media Right Margin";
-// TRANSLATORS: Media Dimensions
-"media-size" = "Media Dimensions";
-// TRANSLATORS: Media Name
-"media-size-name" = "Media Name";
-// TRANSLATORS: Media Source
-"media-source" = "Media Source";
-// TRANSLATORS: Alternate
-"media-source.alternate" = "Alternate";
-// TRANSLATORS: Alternate Roll
-"media-source.alternate-roll" = "Alternate Roll";
-// TRANSLATORS: Automatic
-"media-source.auto" = "Automatic";
-// TRANSLATORS: Bottom
-"media-source.bottom" = "Bottom";
-// TRANSLATORS: By-pass Tray
-"media-source.by-pass-tray" = "By-pass Tray";
-// TRANSLATORS: Center
-"media-source.center" = "Center";
-// TRANSLATORS: Disc
-"media-source.disc" = "Disc";
-// TRANSLATORS: Envelope
-"media-source.envelope" = "Envelope";
-// TRANSLATORS: Hagaki
-"media-source.hagaki" = "Hagaki";
-// TRANSLATORS: Large Capacity
-"media-source.large-capacity" = "Large Capacity";
-// TRANSLATORS: Left
-"media-source.left" = "Left";
-// TRANSLATORS: Main
-"media-source.main" = "Main";
-// TRANSLATORS: Main Roll
-"media-source.main-roll" = "Main Roll";
-// TRANSLATORS: Manual
-"media-source.manual" = "Manual";
-// TRANSLATORS: Middle
-"media-source.middle" = "Middle";
-// TRANSLATORS: Photo
-"media-source.photo" = "Photo";
-// TRANSLATORS: Rear
-"media-source.rear" = "Rear";
-// TRANSLATORS: Right
-"media-source.right" = "Right";
-// TRANSLATORS: Roll 1
-"media-source.roll-1" = "Roll 1";
-// TRANSLATORS: Roll 10
-"media-source.roll-10" = "Roll 10";
-// TRANSLATORS: Roll 2
-"media-source.roll-2" = "Roll 2";
-// TRANSLATORS: Roll 3
-"media-source.roll-3" = "Roll 3";
-// TRANSLATORS: Roll 4
-"media-source.roll-4" = "Roll 4";
-// TRANSLATORS: Roll 5
-"media-source.roll-5" = "Roll 5";
-// TRANSLATORS: Roll 6
-"media-source.roll-6" = "Roll 6";
-// TRANSLATORS: Roll 7
-"media-source.roll-7" = "Roll 7";
-// TRANSLATORS: Roll 8
-"media-source.roll-8" = "Roll 8";
-// TRANSLATORS: Roll 9
-"media-source.roll-9" = "Roll 9";
-// TRANSLATORS: Side
-"media-source.side" = "Side";
-// TRANSLATORS: Top
-"media-source.top" = "Top";
-// TRANSLATORS: Tray 1
-"media-source.tray-1" = "Tray 1";
-// TRANSLATORS: Tray 10
-"media-source.tray-10" = "Tray 10";
-// TRANSLATORS: Tray 11
-"media-source.tray-11" = "Tray 11";
-// TRANSLATORS: Tray 12
-"media-source.tray-12" = "Tray 12";
-// TRANSLATORS: Tray 13
-"media-source.tray-13" = "Tray 13";
-// TRANSLATORS: Tray 14
-"media-source.tray-14" = "Tray 14";
-// TRANSLATORS: Tray 15
-"media-source.tray-15" = "Tray 15";
-// TRANSLATORS: Tray 16
-"media-source.tray-16" = "Tray 16";
-// TRANSLATORS: Tray 17
-"media-source.tray-17" = "Tray 17";
-// TRANSLATORS: Tray 18
-"media-source.tray-18" = "Tray 18";
-// TRANSLATORS: Tray 19
-"media-source.tray-19" = "Tray 19";
-// TRANSLATORS: Tray 2
-"media-source.tray-2" = "Tray 2";
-// TRANSLATORS: Tray 20
-"media-source.tray-20" = "Tray 20";
-// TRANSLATORS: Tray 3
-"media-source.tray-3" = "Tray 3";
-// TRANSLATORS: Tray 4
-"media-source.tray-4" = "Tray 4";
-// TRANSLATORS: Tray 5
-"media-source.tray-5" = "Tray 5";
-// TRANSLATORS: Tray 6
-"media-source.tray-6" = "Tray 6";
-// TRANSLATORS: Tray 7
-"media-source.tray-7" = "Tray 7";
-// TRANSLATORS: Tray 8
-"media-source.tray-8" = "Tray 8";
-// TRANSLATORS: Tray 9
-"media-source.tray-9" = "Tray 9";
-// TRANSLATORS: Media Thickness
-"media-thickness" = "Media Thickness";
-// TRANSLATORS: Media Tooth (Texture)
-"media-tooth" = "Media Tooth (Texture)";
-// TRANSLATORS: Antique
-"media-tooth.antique" = "Antique";
-// TRANSLATORS: Extra Smooth
-"media-tooth.calendared" = "Extra Smooth";
-// TRANSLATORS: Coarse
-"media-tooth.coarse" = "Coarse";
-// TRANSLATORS: Fine
-"media-tooth.fine" = "Fine";
-// TRANSLATORS: Linen
-"media-tooth.linen" = "Linen";
-// TRANSLATORS: Medium
-"media-tooth.medium" = "Medium";
-// TRANSLATORS: Smooth
-"media-tooth.smooth" = "Smooth";
-// TRANSLATORS: Stipple
-"media-tooth.stipple" = "Stipple";
-// TRANSLATORS: Rough
-"media-tooth.uncalendared" = "Rough";
-// TRANSLATORS: Vellum
-"media-tooth.vellum" = "Vellum";
-// TRANSLATORS: Media Top Margin
-"media-top-margin" = "Media Top Margin";
-// TRANSLATORS: Media Type
-"media-type" = "Media Type";
-// TRANSLATORS: Aluminum
-"media-type.aluminum" = "Aluminum";
-// TRANSLATORS: Automatic
-"media-type.auto" = "Automatic";
-// TRANSLATORS: Back Print Film
-"media-type.back-print-film" = "Back Print Film";
-// TRANSLATORS: Cardboard
-"media-type.cardboard" = "Cardboard";
-// TRANSLATORS: Cardstock
-"media-type.cardstock" = "Cardstock";
-// TRANSLATORS: CD
-"media-type.cd" = "CD";
-// TRANSLATORS: Photo Advanced Paper
-"media-type.com.hp.advanced-photo" = "Photo Advanced Paper";
-// TRANSLATORS: Brochure Glossy Paper
-"media-type.com.hp.brochure-glossy" = "Brochure Glossy Paper";
-// TRANSLATORS: Brochure Matte Paper
-"media-type.com.hp.brochure-matte" = "Brochure Matte Paper";
-// TRANSLATORS: Matte Coverstock
-"media-type.com.hp.cover-matte" = "Matte Coverstock";
-// TRANSLATORS: EcoSMART Lite Paper
-"media-type.com.hp.ecosmart-lite" = "EcoSMART Lite Paper";
-// TRANSLATORS: Everyday Glossy Paper
-"media-type.com.hp.everyday-glossy" = "Everyday Glossy Paper";
-// TRANSLATORS: Everyday Matte Paper
-"media-type.com.hp.everyday-matte" = "Everyday Matte Paper";
-// TRANSLATORS: Extra Heavyweight Paper
-"media-type.com.hp.extra-heavy" = "Extra Heavyweight Paper";
-// TRANSLATORS: Intermediate Paper
-"media-type.com.hp.intermediate" = "Intermediate Paper";
-// TRANSLATORS: Mid-Weight Paper
-"media-type.com.hp.mid-weight" = "Mid-Weight Paper";
-// TRANSLATORS: Inkjet Premium Paper
-"media-type.com.hp.premium-inkjet" = "Inkjet Premium Paper";
-// TRANSLATORS: Photo Premium Paper
-"media-type.com.hp.premium-photo" = "Photo Premium Paper";
-// TRANSLATORS: Premium Matte Presentation Paper
-"media-type.com.hp.premium-presentation-matte" = "Premium Matte Presentation Paper";
-// TRANSLATORS: Continuous
-"media-type.continuous" = "Continuous";
-// TRANSLATORS: Continuous Long
-"media-type.continuous-long" = "Continuous Long";
-// TRANSLATORS: Continuous Short
-"media-type.continuous-short" = "Continuous Short";
-// TRANSLATORS: Corrugated Board
-"media-type.corrugated-board" = "Corrugated Board";
-// TRANSLATORS: Optical Disc
-"media-type.disc" = "Optical Disc";
-// TRANSLATORS: Glossy Optical Disc
-"media-type.disc-glossy" = "Glossy Optical Disc";
-// TRANSLATORS: High Gloss Optical Disc
-"media-type.disc-high-gloss" = "High Gloss Optical Disc";
-// TRANSLATORS: Matte Optical Disc
-"media-type.disc-matte" = "Matte Optical Disc";
-// TRANSLATORS: Satin Optical Disc
-"media-type.disc-satin" = "Satin Optical Disc";
-// TRANSLATORS: Semi-Gloss Optical Disc
-"media-type.disc-semi-gloss" = "Semi-Gloss Optical Disc";
-// TRANSLATORS: Double Wall
-"media-type.double-wall" = "Double Wall";
-// TRANSLATORS: Dry Film
-"media-type.dry-film" = "Dry Film";
-// TRANSLATORS: DVD
-"media-type.dvd" = "DVD";
-// TRANSLATORS: Embossing Foil
-"media-type.embossing-foil" = "Embossing Foil";
-// TRANSLATORS: End Board
-"media-type.end-board" = "End Board";
-// TRANSLATORS: Envelope
-"media-type.envelope" = "Envelope";
-// TRANSLATORS: Archival Envelope
-"media-type.envelope-archival" = "Archival Envelope";
-// TRANSLATORS: Bond Envelope
-"media-type.envelope-bond" = "Bond Envelope";
-// TRANSLATORS: Coated Envelope
-"media-type.envelope-coated" = "Coated Envelope";
-// TRANSLATORS: Cotton Envelope
-"media-type.envelope-cotton" = "Cotton Envelope";
-// TRANSLATORS: Fine Envelope
-"media-type.envelope-fine" = "Fine Envelope";
-// TRANSLATORS: Heavyweight Envelope
-"media-type.envelope-heavyweight" = "Heavyweight Envelope";
-// TRANSLATORS: Inkjet Envelope
-"media-type.envelope-inkjet" = "Inkjet Envelope";
-// TRANSLATORS: Lightweight Envelope
-"media-type.envelope-lightweight" = "Lightweight Envelope";
-// TRANSLATORS: Plain Envelope
-"media-type.envelope-plain" = "Plain Envelope";
-// TRANSLATORS: Preprinted Envelope
-"media-type.envelope-preprinted" = "Preprinted Envelope";
-// TRANSLATORS: Windowed Envelope
-"media-type.envelope-window" = "Windowed Envelope";
-// TRANSLATORS: Fabric
-"media-type.fabric" = "Fabric";
-// TRANSLATORS: Archival Fabric
-"media-type.fabric-archival" = "Archival Fabric";
-// TRANSLATORS: Glossy Fabric
-"media-type.fabric-glossy" = "Glossy Fabric";
-// TRANSLATORS: High Gloss Fabric
-"media-type.fabric-high-gloss" = "High Gloss Fabric";
-// TRANSLATORS: Matte Fabric
-"media-type.fabric-matte" = "Matte Fabric";
-// TRANSLATORS: Semi-Gloss Fabric
-"media-type.fabric-semi-gloss" = "Semi-Gloss Fabric";
-// TRANSLATORS: Waterproof Fabric
-"media-type.fabric-waterproof" = "Waterproof Fabric";
-// TRANSLATORS: Film
-"media-type.film" = "Film";
-// TRANSLATORS: Flexo Base
-"media-type.flexo-base" = "Flexo Base";
-// TRANSLATORS: Flexo Photo Polymer
-"media-type.flexo-photo-polymer" = "Flexo Photo Polymer";
-// TRANSLATORS: Flute
-"media-type.flute" = "Flute";
-// TRANSLATORS: Foil
-"media-type.foil" = "Foil";
-// TRANSLATORS: Full Cut Tabs
-"media-type.full-cut-tabs" = "Full Cut Tabs";
-// TRANSLATORS: Glass
-"media-type.glass" = "Glass";
-// TRANSLATORS: Glass Colored
-"media-type.glass-colored" = "Glass Colored";
-// TRANSLATORS: Glass Opaque
-"media-type.glass-opaque" = "Glass Opaque";
-// TRANSLATORS: Glass Surfaced
-"media-type.glass-surfaced" = "Glass Surfaced";
-// TRANSLATORS: Glass Textured
-"media-type.glass-textured" = "Glass Textured";
-// TRANSLATORS: Gravure Cylinder
-"media-type.gravure-cylinder" = "Gravure Cylinder";
-// TRANSLATORS: Image Setter Paper
-"media-type.image-setter-paper" = "Image Setter Paper";
-// TRANSLATORS: Imaging Cylinder
-"media-type.imaging-cylinder" = "Imaging Cylinder";
-// TRANSLATORS: Photo Paper Plus Glossy II
-"media-type.jp.co.canon-photo-paper-plus-glossy-ii" = "Photo Paper Plus Glossy II";
-// TRANSLATORS: Photo Paper Pro Platinum
-"media-type.jp.co.canon-photo-paper-pro-platinum" = "Photo Paper Pro Platinum";
-// TRANSLATORS: Photo Paper Plus Glossy II
-"media-type.jp.co.canon_photo-paper-plus-glossy-ii" = "Photo Paper Plus Glossy II";
-// TRANSLATORS: Photo Paper Pro Platinum
-"media-type.jp.co.canon_photo-paper-pro-platinum" = "Photo Paper Pro Platinum";
-// TRANSLATORS: Labels
-"media-type.labels" = "Labels";
-// TRANSLATORS: Colored Labels
-"media-type.labels-colored" = "Colored Labels";
-// TRANSLATORS: Glossy Labels
-"media-type.labels-glossy" = "Glossy Labels";
-// TRANSLATORS: High Gloss Labels
-"media-type.labels-high-gloss" = "High Gloss Labels";
-// TRANSLATORS: Inkjet Labels
-"media-type.labels-inkjet" = "Inkjet Labels";
-// TRANSLATORS: Matte Labels
-"media-type.labels-matte" = "Matte Labels";
-// TRANSLATORS: Permanent Labels
-"media-type.labels-permanent" = "Permanent Labels";
-// TRANSLATORS: Satin Labels
-"media-type.labels-satin" = "Satin Labels";
-// TRANSLATORS: Security Labels
-"media-type.labels-security" = "Security Labels";
-// TRANSLATORS: Semi-Gloss Labels
-"media-type.labels-semi-gloss" = "Semi-Gloss Labels";
-// TRANSLATORS: Laminating Foil
-"media-type.laminating-foil" = "Laminating Foil";
-// TRANSLATORS: Letterhead
-"media-type.letterhead" = "Letterhead";
-// TRANSLATORS: Metal
-"media-type.metal" = "Metal";
-// TRANSLATORS: Metal Glossy
-"media-type.metal-glossy" = "Metal Glossy";
-// TRANSLATORS: Metal High Gloss
-"media-type.metal-high-gloss" = "Metal High Gloss";
-// TRANSLATORS: Metal Matte
-"media-type.metal-matte" = "Metal Matte";
-// TRANSLATORS: Metal Satin
-"media-type.metal-satin" = "Metal Satin";
-// TRANSLATORS: Metal Semi Gloss
-"media-type.metal-semi-gloss" = "Metal Semi Gloss";
-// TRANSLATORS: Mounting Tape
-"media-type.mounting-tape" = "Mounting Tape";
-// TRANSLATORS: Multi Layer
-"media-type.multi-layer" = "Multi Layer";
-// TRANSLATORS: Multi Part Form
-"media-type.multi-part-form" = "Multi Part Form";
-// TRANSLATORS: Other
-"media-type.other" = "Other";
-// TRANSLATORS: Paper
-"media-type.paper" = "Paper";
-// TRANSLATORS: Photo Paper
-"media-type.photographic" = "Photo Paper";
-// TRANSLATORS: Photographic Archival
-"media-type.photographic-archival" = "Photographic Archival";
-// TRANSLATORS: Photo Film
-"media-type.photographic-film" = "Photo Film";
-// TRANSLATORS: Glossy Photo Paper
-"media-type.photographic-glossy" = "Glossy Photo Paper";
-// TRANSLATORS: High Gloss Photo Paper
-"media-type.photographic-high-gloss" = "High Gloss Photo Paper";
-// TRANSLATORS: Matte Photo Paper
-"media-type.photographic-matte" = "Matte Photo Paper";
-// TRANSLATORS: Satin Photo Paper
-"media-type.photographic-satin" = "Satin Photo Paper";
-// TRANSLATORS: Semi-Gloss Photo Paper
-"media-type.photographic-semi-gloss" = "Semi-Gloss Photo Paper";
-// TRANSLATORS: Plastic
-"media-type.plastic" = "Plastic";
-// TRANSLATORS: Plastic Archival
-"media-type.plastic-archival" = "Plastic Archival";
-// TRANSLATORS: Plastic Colored
-"media-type.plastic-colored" = "Plastic Colored";
-// TRANSLATORS: Plastic Glossy
-"media-type.plastic-glossy" = "Plastic Glossy";
-// TRANSLATORS: Plastic High Gloss
-"media-type.plastic-high-gloss" = "Plastic High Gloss";
-// TRANSLATORS: Plastic Matte
-"media-type.plastic-matte" = "Plastic Matte";
-// TRANSLATORS: Plastic Satin
-"media-type.plastic-satin" = "Plastic Satin";
-// TRANSLATORS: Plastic Semi Gloss
-"media-type.plastic-semi-gloss" = "Plastic Semi Gloss";
-// TRANSLATORS: Plate
-"media-type.plate" = "Plate";
-// TRANSLATORS: Polyester
-"media-type.polyester" = "Polyester";
-// TRANSLATORS: Pre Cut Tabs
-"media-type.pre-cut-tabs" = "Pre Cut Tabs";
-// TRANSLATORS: Roll
-"media-type.roll" = "Roll";
-// TRANSLATORS: Screen
-"media-type.screen" = "Screen";
-// TRANSLATORS: Screen Paged
-"media-type.screen-paged" = "Screen Paged";
-// TRANSLATORS: Self Adhesive
-"media-type.self-adhesive" = "Self Adhesive";
-// TRANSLATORS: Self Adhesive Film
-"media-type.self-adhesive-film" = "Self Adhesive Film";
-// TRANSLATORS: Shrink Foil
-"media-type.shrink-foil" = "Shrink Foil";
-// TRANSLATORS: Single Face
-"media-type.single-face" = "Single Face";
-// TRANSLATORS: Single Wall
-"media-type.single-wall" = "Single Wall";
-// TRANSLATORS: Sleeve
-"media-type.sleeve" = "Sleeve";
-// TRANSLATORS: Stationery
-"media-type.stationery" = "Stationery";
-// TRANSLATORS: Stationery Archival
-"media-type.stationery-archival" = "Stationery Archival";
-// TRANSLATORS: Coated Paper
-"media-type.stationery-coated" = "Coated Paper";
-// TRANSLATORS: Stationery Cotton
-"media-type.stationery-cotton" = "Stationery Cotton";
-// TRANSLATORS: Vellum Paper
-"media-type.stationery-fine" = "Vellum Paper";
-// TRANSLATORS: Heavyweight Paper
-"media-type.stationery-heavyweight" = "Heavyweight Paper";
-// TRANSLATORS: Stationery Heavyweight Coated
-"media-type.stationery-heavyweight-coated" = "Stationery Heavyweight Coated";
-// TRANSLATORS: Stationery Inkjet Paper
-"media-type.stationery-inkjet" = "Stationery Inkjet Paper";
-// TRANSLATORS: Letterhead
-"media-type.stationery-letterhead" = "Letterhead";
-// TRANSLATORS: Lightweight Paper
-"media-type.stationery-lightweight" = "Lightweight Paper";
-// TRANSLATORS: Preprinted Paper
-"media-type.stationery-preprinted" = "Preprinted Paper";
-// TRANSLATORS: Punched Paper
-"media-type.stationery-prepunched" = "Punched Paper";
-// TRANSLATORS: Tab Stock
-"media-type.tab-stock" = "Tab Stock";
-// TRANSLATORS: Tractor
-"media-type.tractor" = "Tractor";
-// TRANSLATORS: Transfer
-"media-type.transfer" = "Transfer";
-// TRANSLATORS: Transparency
-"media-type.transparency" = "Transparency";
-// TRANSLATORS: Triple Wall
-"media-type.triple-wall" = "Triple Wall";
-// TRANSLATORS: Wet Film
-"media-type.wet-film" = "Wet Film";
-// TRANSLATORS: Media Weight (grams per m²)
-"media-weight-metric" = "Media Weight (grams per m²)";
-// TRANSLATORS: 28 x 40″
-"media.asme_f_28x40in" = "28 x 40″";
-// TRANSLATORS: A4 or US Letter
-"media.choice_iso_a4_210x297mm_na_letter_8.5x11in" = "A4 or US Letter";
-// TRANSLATORS: 2a0
-"media.iso_2a0_1189x1682mm" = "2a0";
-// TRANSLATORS: A0
-"media.iso_a0_841x1189mm" = "A0";
-// TRANSLATORS: A0x3
-"media.iso_a0x3_1189x2523mm" = "A0x3";
-// TRANSLATORS: A10
-"media.iso_a10_26x37mm" = "A10";
-// TRANSLATORS: A1
-"media.iso_a1_594x841mm" = "A1";
-// TRANSLATORS: A1x3
-"media.iso_a1x3_841x1783mm" = "A1x3";
-// TRANSLATORS: A1x4
-"media.iso_a1x4_841x2378mm" = "A1x4";
-// TRANSLATORS: A2
-"media.iso_a2_420x594mm" = "A2";
-// TRANSLATORS: A2x3
-"media.iso_a2x3_594x1261mm" = "A2x3";
-// TRANSLATORS: A2x4
-"media.iso_a2x4_594x1682mm" = "A2x4";
-// TRANSLATORS: A2x5
-"media.iso_a2x5_594x2102mm" = "A2x5";
-// TRANSLATORS: A3 (Extra)
-"media.iso_a3-extra_322x445mm" = "A3 (Extra)";
-// TRANSLATORS: A3
-"media.iso_a3_297x420mm" = "A3";
-// TRANSLATORS: A3x3
-"media.iso_a3x3_420x891mm" = "A3x3";
-// TRANSLATORS: A3x4
-"media.iso_a3x4_420x1189mm" = "A3x4";
-// TRANSLATORS: A3x5
-"media.iso_a3x5_420x1486mm" = "A3x5";
-// TRANSLATORS: A3x6
-"media.iso_a3x6_420x1783mm" = "A3x6";
-// TRANSLATORS: A3x7
-"media.iso_a3x7_420x2080mm" = "A3x7";
-// TRANSLATORS: A4 (Extra)
-"media.iso_a4-extra_235.5x322.3mm" = "A4 (Extra)";
-// TRANSLATORS: A4 (Tab)
-"media.iso_a4-tab_225x297mm" = "A4 (Tab)";
-// TRANSLATORS: A4
-"media.iso_a4_210x297mm" = "A4";
-// TRANSLATORS: A4x3
-"media.iso_a4x3_297x630mm" = "A4x3";
-// TRANSLATORS: A4x4
-"media.iso_a4x4_297x841mm" = "A4x4";
-// TRANSLATORS: A4x5
-"media.iso_a4x5_297x1051mm" = "A4x5";
-// TRANSLATORS: A4x6
-"media.iso_a4x6_297x1261mm" = "A4x6";
-// TRANSLATORS: A4x7
-"media.iso_a4x7_297x1471mm" = "A4x7";
-// TRANSLATORS: A4x8
-"media.iso_a4x8_297x1682mm" = "A4x8";
-// TRANSLATORS: A4x9
-"media.iso_a4x9_297x1892mm" = "A4x9";
-// TRANSLATORS: A5 (Extra)
-"media.iso_a5-extra_174x235mm" = "A5 (Extra)";
-// TRANSLATORS: A5
-"media.iso_a5_148x210mm" = "A5";
-// TRANSLATORS: A6
-"media.iso_a6_105x148mm" = "A6";
-// TRANSLATORS: A7
-"media.iso_a7_74x105mm" = "A7";
-// TRANSLATORS: A8
-"media.iso_a8_52x74mm" = "A8";
-// TRANSLATORS: A9
-"media.iso_a9_37x52mm" = "A9";
-// TRANSLATORS: B0
-"media.iso_b0_1000x1414mm" = "B0";
-// TRANSLATORS: B10
-"media.iso_b10_31x44mm" = "B10";
-// TRANSLATORS: B1
-"media.iso_b1_707x1000mm" = "B1";
-// TRANSLATORS: B2
-"media.iso_b2_500x707mm" = "B2";
-// TRANSLATORS: B3
-"media.iso_b3_353x500mm" = "B3";
-// TRANSLATORS: B4
-"media.iso_b4_250x353mm" = "B4";
-// TRANSLATORS: B5 (Extra)
-"media.iso_b5-extra_201x276mm" = "B5 (Extra)";
-// TRANSLATORS: Envelope B5
-"media.iso_b5_176x250mm" = "Envelope B5";
-// TRANSLATORS: B6
-"media.iso_b6_125x176mm" = "B6";
-// TRANSLATORS: Envelope B6/C4
-"media.iso_b6c4_125x324mm" = "Envelope B6/C4";
-// TRANSLATORS: B7
-"media.iso_b7_88x125mm" = "B7";
-// TRANSLATORS: B8
-"media.iso_b8_62x88mm" = "B8";
-// TRANSLATORS: B9
-"media.iso_b9_44x62mm" = "B9";
-// TRANSLATORS: CEnvelope 0
-"media.iso_c0_917x1297mm" = "CEnvelope 0";
-// TRANSLATORS: CEnvelope 10
-"media.iso_c10_28x40mm" = "CEnvelope 10";
-// TRANSLATORS: CEnvelope 1
-"media.iso_c1_648x917mm" = "CEnvelope 1";
-// TRANSLATORS: CEnvelope 2
-"media.iso_c2_458x648mm" = "CEnvelope 2";
-// TRANSLATORS: CEnvelope 3
-"media.iso_c3_324x458mm" = "CEnvelope 3";
-// TRANSLATORS: CEnvelope 4
-"media.iso_c4_229x324mm" = "CEnvelope 4";
-// TRANSLATORS: CEnvelope 5
-"media.iso_c5_162x229mm" = "CEnvelope 5";
-// TRANSLATORS: CEnvelope 6
-"media.iso_c6_114x162mm" = "CEnvelope 6";
-// TRANSLATORS: CEnvelope 6c5
-"media.iso_c6c5_114x229mm" = "CEnvelope 6c5";
-// TRANSLATORS: CEnvelope 7
-"media.iso_c7_81x114mm" = "CEnvelope 7";
-// TRANSLATORS: CEnvelope 7c6
-"media.iso_c7c6_81x162mm" = "CEnvelope 7c6";
-// TRANSLATORS: CEnvelope 8
-"media.iso_c8_57x81mm" = "CEnvelope 8";
-// TRANSLATORS: CEnvelope 9
-"media.iso_c9_40x57mm" = "CEnvelope 9";
-// TRANSLATORS: Envelope DL
-"media.iso_dl_110x220mm" = "Envelope DL";
-// TRANSLATORS: Id-1
-"media.iso_id-1_53.98x85.6mm" = "Id-1";
-// TRANSLATORS: Id-3
-"media.iso_id-3_88x125mm" = "Id-3";
-// TRANSLATORS: ISO RA0
-"media.iso_ra0_860x1220mm" = "ISO RA0";
-// TRANSLATORS: ISO RA1
-"media.iso_ra1_610x860mm" = "ISO RA1";
-// TRANSLATORS: ISO RA2
-"media.iso_ra2_430x610mm" = "ISO RA2";
-// TRANSLATORS: ISO RA3
-"media.iso_ra3_305x430mm" = "ISO RA3";
-// TRANSLATORS: ISO RA4
-"media.iso_ra4_215x305mm" = "ISO RA4";
-// TRANSLATORS: ISO SRA0
-"media.iso_sra0_900x1280mm" = "ISO SRA0";
-// TRANSLATORS: ISO SRA1
-"media.iso_sra1_640x900mm" = "ISO SRA1";
-// TRANSLATORS: ISO SRA2
-"media.iso_sra2_450x640mm" = "ISO SRA2";
-// TRANSLATORS: ISO SRA3
-"media.iso_sra3_320x450mm" = "ISO SRA3";
-// TRANSLATORS: ISO SRA4
-"media.iso_sra4_225x320mm" = "ISO SRA4";
-// TRANSLATORS: JIS B0
-"media.jis_b0_1030x1456mm" = "JIS B0";
-// TRANSLATORS: JIS B10
-"media.jis_b10_32x45mm" = "JIS B10";
-// TRANSLATORS: JIS B1
-"media.jis_b1_728x1030mm" = "JIS B1";
-// TRANSLATORS: JIS B2
-"media.jis_b2_515x728mm" = "JIS B2";
-// TRANSLATORS: JIS B3
-"media.jis_b3_364x515mm" = "JIS B3";
-// TRANSLATORS: JIS B4
-"media.jis_b4_257x364mm" = "JIS B4";
-// TRANSLATORS: JIS B5
-"media.jis_b5_182x257mm" = "JIS B5";
-// TRANSLATORS: JIS B6
-"media.jis_b6_128x182mm" = "JIS B6";
-// TRANSLATORS: JIS B7
-"media.jis_b7_91x128mm" = "JIS B7";
-// TRANSLATORS: JIS B8
-"media.jis_b8_64x91mm" = "JIS B8";
-// TRANSLATORS: JIS B9
-"media.jis_b9_45x64mm" = "JIS B9";
-// TRANSLATORS: JIS Executive
-"media.jis_exec_216x330mm" = "JIS Executive";
-// TRANSLATORS: Envelope Chou 2
-"media.jpn_chou2_111.1x146mm" = "Envelope Chou 2";
-// TRANSLATORS: Envelope Chou 3
-"media.jpn_chou3_120x235mm" = "Envelope Chou 3";
-// TRANSLATORS: Envelope Chou 40
-"media.jpn_chou40_90x225mm" = "Envelope Chou 40";
-// TRANSLATORS: Envelope Chou 4
-"media.jpn_chou4_90x205mm" = "Envelope Chou 4";
-// TRANSLATORS: Hagaki
-"media.jpn_hagaki_100x148mm" = "Hagaki";
-// TRANSLATORS: Envelope Kahu
-"media.jpn_kahu_240x322.1mm" = "Envelope Kahu";
-// TRANSLATORS: 270 x 382mm
-"media.jpn_kaku1_270x382mm" = "270 x 382mm";
-// TRANSLATORS: Envelope Kahu 2
-"media.jpn_kaku2_240x332mm" = "Envelope Kahu 2";
-// TRANSLATORS: 216 x 277mm
-"media.jpn_kaku3_216x277mm" = "216 x 277mm";
-// TRANSLATORS: 197 x 267mm
-"media.jpn_kaku4_197x267mm" = "197 x 267mm";
-// TRANSLATORS: 190 x 240mm
-"media.jpn_kaku5_190x240mm" = "190 x 240mm";
-// TRANSLATORS: 142 x 205mm
-"media.jpn_kaku7_142x205mm" = "142 x 205mm";
-// TRANSLATORS: 119 x 197mm
-"media.jpn_kaku8_119x197mm" = "119 x 197mm";
-// TRANSLATORS: Oufuku Reply Postcard
-"media.jpn_oufuku_148x200mm" = "Oufuku Reply Postcard";
-// TRANSLATORS: Envelope You 4
-"media.jpn_you4_105x235mm" = "Envelope You 4";
-// TRANSLATORS: 10 x 11″
-"media.na_10x11_10x11in" = "10 x 11″";
-// TRANSLATORS: 10 x 13″
-"media.na_10x13_10x13in" = "10 x 13″";
-// TRANSLATORS: 10 x 14″
-"media.na_10x14_10x14in" = "10 x 14″";
-// TRANSLATORS: 10 x 15″
-"media.na_10x15_10x15in" = "10 x 15″";
-// TRANSLATORS: 11 x 12″
-"media.na_11x12_11x12in" = "11 x 12″";
-// TRANSLATORS: 11 x 15″
-"media.na_11x15_11x15in" = "11 x 15″";
-// TRANSLATORS: 12 x 19″
-"media.na_12x19_12x19in" = "12 x 19″";
-// TRANSLATORS: 5 x 7″
-"media.na_5x7_5x7in" = "5 x 7″";
-// TRANSLATORS: 6 x 9″
-"media.na_6x9_6x9in" = "6 x 9″";
-// TRANSLATORS: 7 x 9″
-"media.na_7x9_7x9in" = "7 x 9″";
-// TRANSLATORS: 9 x 11″
-"media.na_9x11_9x11in" = "9 x 11″";
-// TRANSLATORS: Envelope A2
-"media.na_a2_4.375x5.75in" = "Envelope A2";
-// TRANSLATORS: 9 x 12″
-"media.na_arch-a_9x12in" = "9 x 12″";
-// TRANSLATORS: 12 x 18″
-"media.na_arch-b_12x18in" = "12 x 18″";
-// TRANSLATORS: 18 x 24″
-"media.na_arch-c_18x24in" = "18 x 24″";
-// TRANSLATORS: 24 x 36″
-"media.na_arch-d_24x36in" = "24 x 36″";
-// TRANSLATORS: 26 x 38″
-"media.na_arch-e2_26x38in" = "26 x 38″";
-// TRANSLATORS: 27 x 39″
-"media.na_arch-e3_27x39in" = "27 x 39″";
-// TRANSLATORS: 36 x 48″
-"media.na_arch-e_36x48in" = "36 x 48″";
-// TRANSLATORS: 12 x 19.17″
-"media.na_b-plus_12x19.17in" = "12 x 19.17″";
-// TRANSLATORS: Envelope C5
-"media.na_c5_6.5x9.5in" = "Envelope C5";
-// TRANSLATORS: 17 x 22″
-"media.na_c_17x22in" = "17 x 22″";
-// TRANSLATORS: 22 x 34″
-"media.na_d_22x34in" = "22 x 34″";
-// TRANSLATORS: 34 x 44″
-"media.na_e_34x44in" = "34 x 44″";
-// TRANSLATORS: 11 x 14″
-"media.na_edp_11x14in" = "11 x 14″";
-// TRANSLATORS: 12 x 14″
-"media.na_eur-edp_12x14in" = "12 x 14″";
-// TRANSLATORS: Executive
-"media.na_executive_7.25x10.5in" = "Executive";
-// TRANSLATORS: 44 x 68″
-"media.na_f_44x68in" = "44 x 68″";
-// TRANSLATORS: European Fanfold
-"media.na_fanfold-eur_8.5x12in" = "European Fanfold";
-// TRANSLATORS: US Fanfold
-"media.na_fanfold-us_11x14.875in" = "US Fanfold";
-// TRANSLATORS: Foolscap
-"media.na_foolscap_8.5x13in" = "Foolscap";
-// TRANSLATORS: 8 x 13″
-"media.na_govt-legal_8x13in" = "8 x 13″";
-// TRANSLATORS: 8 x 10″
-"media.na_govt-letter_8x10in" = "8 x 10″";
-// TRANSLATORS: 3 x 5″
-"media.na_index-3x5_3x5in" = "3 x 5″";
-// TRANSLATORS: 6 x 8″
-"media.na_index-4x6-ext_6x8in" = "6 x 8″";
-// TRANSLATORS: 4 x 6″
-"media.na_index-4x6_4x6in" = "4 x 6″";
-// TRANSLATORS: 5 x 8″
-"media.na_index-5x8_5x8in" = "5 x 8″";
-// TRANSLATORS: Statement
-"media.na_invoice_5.5x8.5in" = "Statement";
-// TRANSLATORS: 11 x 17″
-"media.na_ledger_11x17in" = "11 x 17″";
-// TRANSLATORS: US Legal (Extra)
-"media.na_legal-extra_9.5x15in" = "US Legal (Extra)";
-// TRANSLATORS: US Legal
-"media.na_legal_8.5x14in" = "US Legal";
-// TRANSLATORS: US Letter (Extra)
-"media.na_letter-extra_9.5x12in" = "US Letter (Extra)";
-// TRANSLATORS: US Letter (Plus)
-"media.na_letter-plus_8.5x12.69in" = "US Letter (Plus)";
-// TRANSLATORS: US Letter
-"media.na_letter_8.5x11in" = "US Letter";
-// TRANSLATORS: Envelope Monarch
-"media.na_monarch_3.875x7.5in" = "Envelope Monarch";
-// TRANSLATORS: Envelope #10
-"media.na_number-10_4.125x9.5in" = "Envelope #10";
-// TRANSLATORS: Envelope #11
-"media.na_number-11_4.5x10.375in" = "Envelope #11";
-// TRANSLATORS: Envelope #12
-"media.na_number-12_4.75x11in" = "Envelope #12";
-// TRANSLATORS: Envelope #14
-"media.na_number-14_5x11.5in" = "Envelope #14";
-// TRANSLATORS: Envelope #9
-"media.na_number-9_3.875x8.875in" = "Envelope #9";
-// TRANSLATORS: 8.5 x 13.4″
-"media.na_oficio_8.5x13.4in" = "8.5 x 13.4″";
-// TRANSLATORS: Envelope Personal
-"media.na_personal_3.625x6.5in" = "Envelope Personal";
-// TRANSLATORS: Quarto
-"media.na_quarto_8.5x10.83in" = "Quarto";
-// TRANSLATORS: 8.94 x 14″
-"media.na_super-a_8.94x14in" = "8.94 x 14″";
-// TRANSLATORS: 13 x 19″
-"media.na_super-b_13x19in" = "13 x 19″";
-// TRANSLATORS: 30 x 42″
-"media.na_wide-format_30x42in" = "30 x 42″";
-// TRANSLATORS: 12 x 16″
-"media.oe_12x16_12x16in" = "12 x 16″";
-// TRANSLATORS: 14 x 17″
-"media.oe_14x17_14x17in" = "14 x 17″";
-// TRANSLATORS: 18 x 22″
-"media.oe_18x22_18x22in" = "18 x 22″";
-// TRANSLATORS: 17 x 24″
-"media.oe_a2plus_17x24in" = "17 x 24″";
-// TRANSLATORS: 2 x 3.5″
-"media.oe_business-card_2x3.5in" = "2 x 3.5″";
-// TRANSLATORS: 10 x 12″
-"media.oe_photo-10r_10x12in" = "10 x 12″";
-// TRANSLATORS: 20 x 24″
-"media.oe_photo-20r_20x24in" = "20 x 24″";
-// TRANSLATORS: 3.5 x 5″
-"media.oe_photo-l_3.5x5in" = "3.5 x 5″";
-// TRANSLATORS: 10 x 15″
-"media.oe_photo-s10r_10x15in" = "10 x 15″";
-// TRANSLATORS: 4 x 4″
-"media.oe_square-photo_4x4in" = "4 x 4″";
-// TRANSLATORS: 5 x 5″
-"media.oe_square-photo_5x5in" = "5 x 5″";
-// TRANSLATORS: 184 x 260mm
-"media.om_16k_184x260mm" = "184 x 260mm";
-// TRANSLATORS: 195 x 270mm
-"media.om_16k_195x270mm" = "195 x 270mm";
-// TRANSLATORS: 55 x 85mm
-"media.om_business-card_55x85mm" = "55 x 85mm";
-// TRANSLATORS: 55 x 91mm
-"media.om_business-card_55x91mm" = "55 x 91mm";
-// TRANSLATORS: 54 x 86mm
-"media.om_card_54x86mm" = "54 x 86mm";
-// TRANSLATORS: 275 x 395mm
-"media.om_dai-pa-kai_275x395mm" = "275 x 395mm";
-// TRANSLATORS: 89 x 119mm
-"media.om_dsc-photo_89x119mm" = "89 x 119mm";
-// TRANSLATORS: Folio
-"media.om_folio-sp_215x315mm" = "Folio";
-// TRANSLATORS: Folio (Special)
-"media.om_folio_210x330mm" = "Folio (Special)";
-// TRANSLATORS: Envelope Invitation
-"media.om_invite_220x220mm" = "Envelope Invitation";
-// TRANSLATORS: Envelope Italian
-"media.om_italian_110x230mm" = "Envelope Italian";
-// TRANSLATORS: 198 x 275mm
-"media.om_juuro-ku-kai_198x275mm" = "198 x 275mm";
-// TRANSLATORS: 200 x 300
-"media.om_large-photo_200x300" = "200 x 300";
-// TRANSLATORS: 130 x 180mm
-"media.om_medium-photo_130x180mm" = "130 x 180mm";
-// TRANSLATORS: 267 x 389mm
-"media.om_pa-kai_267x389mm" = "267 x 389mm";
-// TRANSLATORS: Envelope Postfix
-"media.om_postfix_114x229mm" = "Envelope Postfix";
-// TRANSLATORS: 100 x 150mm
-"media.om_small-photo_100x150mm" = "100 x 150mm";
-// TRANSLATORS: 89 x 89mm
-"media.om_square-photo_89x89mm" = "89 x 89mm";
-// TRANSLATORS: 100 x 200mm
-"media.om_wide-photo_100x200mm" = "100 x 200mm";
-// TRANSLATORS: Envelope Chinese #10
-"media.prc_10_324x458mm" = "Envelope Chinese #10";
-// TRANSLATORS: Chinese 16k
-"media.prc_16k_146x215mm" = "Chinese 16k";
-// TRANSLATORS: Envelope Chinese #1
-"media.prc_1_102x165mm" = "Envelope Chinese #1";
-// TRANSLATORS: Envelope Chinese #2
-"media.prc_2_102x176mm" = "Envelope Chinese #2";
-// TRANSLATORS: Chinese 32k
-"media.prc_32k_97x151mm" = "Chinese 32k";
-// TRANSLATORS: Envelope Chinese #3
-"media.prc_3_125x176mm" = "Envelope Chinese #3";
-// TRANSLATORS: Envelope Chinese #4
-"media.prc_4_110x208mm" = "Envelope Chinese #4";
-// TRANSLATORS: Envelope Chinese #5
-"media.prc_5_110x220mm" = "Envelope Chinese #5";
-// TRANSLATORS: Envelope Chinese #6
-"media.prc_6_120x320mm" = "Envelope Chinese #6";
-// TRANSLATORS: Envelope Chinese #7
-"media.prc_7_160x230mm" = "Envelope Chinese #7";
-// TRANSLATORS: Envelope Chinese #8
-"media.prc_8_120x309mm" = "Envelope Chinese #8";
-// TRANSLATORS: ROC 16k
-"media.roc_16k_7.75x10.75in" = "ROC 16k";
-// TRANSLATORS: ROC 8k
-"media.roc_8k_10.75x15.5in" = "ROC 8k";
-"members of class %s:" = "members of class %s:";
-// TRANSLATORS: Multiple Document Handling
-"multiple-document-handling" = "Multiple Document Handling";
-// TRANSLATORS: Separate Documents Collated Copies
-"multiple-document-handling.separate-documents-collated-copies" = "Separate Documents Collated Copies";
-// TRANSLATORS: Separate Documents Uncollated Copies
-"multiple-document-handling.separate-documents-uncollated-copies" = "Separate Documents Uncollated Copies";
-// TRANSLATORS: Single Document
-"multiple-document-handling.single-document" = "Single Document";
-// TRANSLATORS: Single Document New Sheet
-"multiple-document-handling.single-document-new-sheet" = "Single Document New Sheet";
-// TRANSLATORS: Multiple Object Handling
-"multiple-object-handling" = "Multiple Object Handling";
-// TRANSLATORS: Multiple Object Handling Actual
-"multiple-object-handling-actual" = "Multiple Object Handling Actual";
-// TRANSLATORS: Automatic
-"multiple-object-handling.auto" = "Automatic";
-// TRANSLATORS: Best Fit
-"multiple-object-handling.best-fit" = "Best Fit";
-// TRANSLATORS: Best Quality
-"multiple-object-handling.best-quality" = "Best Quality";
-// TRANSLATORS: Best Speed
-"multiple-object-handling.best-speed" = "Best Speed";
-// TRANSLATORS: One At A Time
-"multiple-object-handling.one-at-a-time" = "One At A Time";
-// TRANSLATORS: On Timeout
-"multiple-operation-time-out-action" = "On Timeout";
-// TRANSLATORS: Abort Job
-"multiple-operation-time-out-action.abort-job" = "Abort Job";
-// TRANSLATORS: Hold Job
-"multiple-operation-time-out-action.hold-job" = "Hold Job";
-// TRANSLATORS: Process Job
-"multiple-operation-time-out-action.process-job" = "Process Job";
-"no entries" = "no entries";
-"no system default destination" = "no system default destination";
-// TRANSLATORS: Noise Removal
-"noise-removal" = "Noise Removal";
-// TRANSLATORS: Notify Attributes
-"notify-attributes" = "Notify Attributes";
-// TRANSLATORS: Notify Charset
-"notify-charset" = "Notify Charset";
-// TRANSLATORS: Notify Events
-"notify-events" = "Notify Events";
-"notify-events not specified." = "notify-events not specified.";
-// TRANSLATORS: Document Completed
-"notify-events.document-completed" = "Document Completed";
-// TRANSLATORS: Document Config Changed
-"notify-events.document-config-changed" = "Document Config Changed";
-// TRANSLATORS: Document Created
-"notify-events.document-created" = "Document Created";
-// TRANSLATORS: Document Fetchable
-"notify-events.document-fetchable" = "Document Fetchable";
-// TRANSLATORS: Document State Changed
-"notify-events.document-state-changed" = "Document State Changed";
-// TRANSLATORS: Document Stopped
-"notify-events.document-stopped" = "Document Stopped";
-// TRANSLATORS: Job Completed
-"notify-events.job-completed" = "Job Completed";
-// TRANSLATORS: Job Config Changed
-"notify-events.job-config-changed" = "Job Config Changed";
-// TRANSLATORS: Job Created
-"notify-events.job-created" = "Job Created";
-// TRANSLATORS: Job Fetchable
-"notify-events.job-fetchable" = "Job Fetchable";
-// TRANSLATORS: Job Progress
-"notify-events.job-progress" = "Job Progress";
-// TRANSLATORS: Job State Changed
-"notify-events.job-state-changed" = "Job State Changed";
-// TRANSLATORS: Job Stopped
-"notify-events.job-stopped" = "Job Stopped";
-// TRANSLATORS: None
-"notify-events.none" = "None";
-// TRANSLATORS: Printer Config Changed
-"notify-events.printer-config-changed" = "Printer Config Changed";
-// TRANSLATORS: Printer Finishings Changed
-"notify-events.printer-finishings-changed" = "Printer Finishings Changed";
-// TRANSLATORS: Printer Media Changed
-"notify-events.printer-media-changed" = "Printer Media Changed";
-// TRANSLATORS: Printer Queue Order Changed
-"notify-events.printer-queue-order-changed" = "Printer Queue Order Changed";
-// TRANSLATORS: Printer Restarted
-"notify-events.printer-restarted" = "Printer Restarted";
-// TRANSLATORS: Printer Shutdown
-"notify-events.printer-shutdown" = "Printer Shutdown";
-// TRANSLATORS: Printer State Changed
-"notify-events.printer-state-changed" = "Printer State Changed";
-// TRANSLATORS: Printer Stopped
-"notify-events.printer-stopped" = "Printer Stopped";
-// TRANSLATORS: Notify Get Interval
-"notify-get-interval" = "Notify Get Interval";
-// TRANSLATORS: Notify Lease Duration
-"notify-lease-duration" = "Notify Lease Duration";
-// TRANSLATORS: Notify Natural Language
-"notify-natural-language" = "Notify Natural Language";
-// TRANSLATORS: Notify Pull Method
-"notify-pull-method" = "Notify Pull Method";
-// TRANSLATORS: Notify Recipient
-"notify-recipient-uri" = "Notify Recipient";
-"notify-recipient-uri URI \"%s\" is already used." = "notify-recipient-uri URI “%s” is already used.";
-"notify-recipient-uri URI \"%s\" uses unknown scheme." = "notify-recipient-uri URI \"%s\" uses unknown scheme.";
-// TRANSLATORS: Notify Sequence Numbers
-"notify-sequence-numbers" = "Notify Sequence Numbers";
-// TRANSLATORS: Notify Subscription Ids
-"notify-subscription-ids" = "Notify Subscription Ids";
-// TRANSLATORS: Notify Time Interval
-"notify-time-interval" = "Notify Time Interval";
-// TRANSLATORS: Notify User Data
-"notify-user-data" = "Notify User Data";
-// TRANSLATORS: Notify Wait
-"notify-wait" = "Notify Wait";
-// TRANSLATORS: Number Of Retries
-"number-of-retries" = "Number Of Retries";
-// TRANSLATORS: Number-Up
-"number-up" = "Number-Up";
-// TRANSLATORS: Number-Up Layout
-"number-up-layout" = "number-up-layout";
-// TRANSLATORS: Bottom-Top, Left-Right
-"number-up-layout.btlr" = "number-up-layout.btlr";
-// TRANSLATORS: Bottom-Top, Right-Left
-"number-up-layout.btrl" = "number-up-layout.btrl";
-// TRANSLATORS: Left-Right, Bottom-Top
-"number-up-layout.lrbt" = "number-up-layout.lrbt";
-// TRANSLATORS: Left-Right, Top-Bottom
-"number-up-layout.lrtb" = "number-up-layout.lrtb";
-// TRANSLATORS: Right-Left, Bottom-Top
-"number-up-layout.rlbt" = "number-up-layout.rlbt";
-// TRANSLATORS: Right-Left, Top-Bottom
-"number-up-layout.rltb" = "number-up-layout.rltb";
-// TRANSLATORS: Top-Bottom, Left-Right
-"number-up-layout.tblr" = "number-up-layout.tblr";
-// TRANSLATORS: Top-Bottom, Right-Left
-"number-up-layout.tbrl" = "number-up-layout.tbrl";
-// TRANSLATORS: Object Offset
-"object-offset" = "Object Offset";
-// TRANSLATORS: Object Size
-"object-size" = "Object Size";
-// TRANSLATORS: Organization Name
-"organization-name" = "Organization Name";
-// TRANSLATORS: Orientation
-"orientation-requested" = "Orientation";
-// TRANSLATORS: Portrait
-"orientation-requested.3" = "Portrait";
-// TRANSLATORS: Landscape
-"orientation-requested.4" = "Landscape";
-// TRANSLATORS: Reverse Landscape
-"orientation-requested.5" = "Reverse Landscape";
-// TRANSLATORS: Reverse Portrait
-"orientation-requested.6" = "Reverse Portrait";
-// TRANSLATORS: None
-"orientation-requested.7" = "None";
-// TRANSLATORS: Scanned Image Options
-"output-attributes" = "Scanned Image Options";
-// TRANSLATORS: Output Tray
-"output-bin" = "Output Tray";
-// TRANSLATORS: Automatic
-"output-bin.auto" = "Automatic";
-// TRANSLATORS: Bottom
-"output-bin.bottom" = "Bottom";
-// TRANSLATORS: Center
-"output-bin.center" = "Center";
-// TRANSLATORS: Face Down
-"output-bin.face-down" = "Face Down";
-// TRANSLATORS: Face Up
-"output-bin.face-up" = "Face Up";
-// TRANSLATORS: Large Capacity
-"output-bin.large-capacity" = "Large Capacity";
-// TRANSLATORS: Left
-"output-bin.left" = "Left";
-// TRANSLATORS: Mailbox 1
-"output-bin.mailbox-1" = "Mailbox 1";
-// TRANSLATORS: Mailbox 10
-"output-bin.mailbox-10" = "Mailbox 10";
-// TRANSLATORS: Mailbox 2
-"output-bin.mailbox-2" = "Mailbox 2";
-// TRANSLATORS: Mailbox 3
-"output-bin.mailbox-3" = "Mailbox 3";
-// TRANSLATORS: Mailbox 4
-"output-bin.mailbox-4" = "Mailbox 4";
-// TRANSLATORS: Mailbox 5
-"output-bin.mailbox-5" = "Mailbox 5";
-// TRANSLATORS: Mailbox 6
-"output-bin.mailbox-6" = "Mailbox 6";
-// TRANSLATORS: Mailbox 7
-"output-bin.mailbox-7" = "Mailbox 7";
-// TRANSLATORS: Mailbox 8
-"output-bin.mailbox-8" = "Mailbox 8";
-// TRANSLATORS: Mailbox 9
-"output-bin.mailbox-9" = "Mailbox 9";
-// TRANSLATORS: Middle
-"output-bin.middle" = "Middle";
-// TRANSLATORS: My Mailbox
-"output-bin.my-mailbox" = "My Mailbox";
-// TRANSLATORS: Rear
-"output-bin.rear" = "Rear";
-// TRANSLATORS: Right
-"output-bin.right" = "Right";
-// TRANSLATORS: Side
-"output-bin.side" = "Side";
-// TRANSLATORS: Stacker 1
-"output-bin.stacker-1" = "Stacker 1";
-// TRANSLATORS: Stacker 10
-"output-bin.stacker-10" = "Stacker 10";
-// TRANSLATORS: Stacker 2
-"output-bin.stacker-2" = "Stacker 2";
-// TRANSLATORS: Stacker 3
-"output-bin.stacker-3" = "Stacker 3";
-// TRANSLATORS: Stacker 4
-"output-bin.stacker-4" = "Stacker 4";
-// TRANSLATORS: Stacker 5
-"output-bin.stacker-5" = "Stacker 5";
-// TRANSLATORS: Stacker 6
-"output-bin.stacker-6" = "Stacker 6";
-// TRANSLATORS: Stacker 7
-"output-bin.stacker-7" = "Stacker 7";
-// TRANSLATORS: Stacker 8
-"output-bin.stacker-8" = "Stacker 8";
-// TRANSLATORS: Stacker 9
-"output-bin.stacker-9" = "Stacker 9";
-// TRANSLATORS: Top
-"output-bin.top" = "Top";
-// TRANSLATORS: Tray 1
-"output-bin.tray-1" = "Tray 1";
-// TRANSLATORS: Tray 10
-"output-bin.tray-10" = "Tray 10";
-// TRANSLATORS: Tray 2
-"output-bin.tray-2" = "Tray 2";
-// TRANSLATORS: Tray 3
-"output-bin.tray-3" = "Tray 3";
-// TRANSLATORS: Tray 4
-"output-bin.tray-4" = "Tray 4";
-// TRANSLATORS: Tray 5
-"output-bin.tray-5" = "Tray 5";
-// TRANSLATORS: Tray 6
-"output-bin.tray-6" = "Tray 6";
-// TRANSLATORS: Tray 7
-"output-bin.tray-7" = "Tray 7";
-// TRANSLATORS: Tray 8
-"output-bin.tray-8" = "Tray 8";
-// TRANSLATORS: Tray 9
-"output-bin.tray-9" = "Tray 9";
-// TRANSLATORS: Scanned Image Quality
-"output-compression-quality-factor" = "Scanned Image Quality";
-// TRANSLATORS: Page Border
-"page-border" = "page-border";
-// TRANSLATORS: Thin Double Border
-"page-border.double" = "page-border.double";
-// TRANSLATORS: Thick Double Border
-"page-border.double-thick" = "page-border.double-thick";
-// TRANSLATORS: No Border
-"page-border.none" = "page-border.none";
-// TRANSLATORS: Thin Single Border
-"page-border.single" = "page-border.single";
-// TRANSLATORS: Thick Single Border
-"page-border.single-thick" = "page-border.single-thick";
-// TRANSLATORS: Page Delivery
-"page-delivery" = "Page Delivery";
-// TRANSLATORS: Reverse Order Face-down
-"page-delivery.reverse-order-face-down" = "Reverse Order Face-down";
-// TRANSLATORS: Reverse Order Face-up
-"page-delivery.reverse-order-face-up" = "Reverse Order Face-up";
-// TRANSLATORS: Same Order Face-down
-"page-delivery.same-order-face-down" = "Same Order Face-down";
-// TRANSLATORS: Same Order Face-up
-"page-delivery.same-order-face-up" = "Same Order Face-up";
-// TRANSLATORS: System Specified
-"page-delivery.system-specified" = "System Specified";
-// TRANSLATORS: Page Order Received
-"page-order-received" = "Page Order Received";
-// TRANSLATORS: 1 To N
-"page-order-received.1-to-n-order" = "1 To N";
-// TRANSLATORS: N To 1
-"page-order-received.n-to-1-order" = "N To 1";
-// TRANSLATORS: Page Ranges
-"page-ranges" = "Page Ranges";
-// TRANSLATORS: Page Set
-"page-set" = "page-set";
-// TRANSLATORS: All Pages
-"page-set.all" = "page-set.all";
-// TRANSLATORS: Even Pages
-"page-set.even" = "page-set.even";
-// TRANSLATORS: Odd Pages
-"page-set.odd" = "page-set.odd";
-// TRANSLATORS: Pages
-"pages" = "Pages";
-// TRANSLATORS: Pages Per Subset
-"pages-per-subset" = "Pages Per Subset";
-// TRANSLATORS: Pclm Raster Back Side
-"pclm-raster-back-side" = "Pclm Raster Back Side";
-// TRANSLATORS: Flipped
-"pclm-raster-back-side.flipped" = "Flipped";
-// TRANSLATORS: Normal
-"pclm-raster-back-side.normal" = "Normal";
-// TRANSLATORS: Rotated
-"pclm-raster-back-side.rotated" = "Rotated";
-// TRANSLATORS: Pclm Source Resolution
-"pclm-source-resolution" = "Pclm Source Resolution";
-"pending" = "pending";
-// TRANSLATORS: Platform Shape
-"platform-shape" = "Platform Shape";
-// TRANSLATORS: Round
-"platform-shape.ellipse" = "Round";
-// TRANSLATORS: Rectangle
-"platform-shape.rectangle" = "Rectangle";
-// TRANSLATORS: Platform Temperature
-"platform-temperature" = "Platform Temperature";
-// TRANSLATORS: Image Position
-"position" = "position";
-// TRANSLATORS: Bottom-Center
-"position.bottom" = "position.bottom";
-// TRANSLATORS: Bottom-Left
-"position.bottom-left" = "position.bottom-left";
-// TRANSLATORS: Bottom-Right
-"position.bottom-right" = "position.bottom-right";
-// TRANSLATORS: Center
-"position.center" = "position.center";
-// TRANSLATORS: Left-Center
-"position.left" = "position.left";
-// TRANSLATORS: Right-Center
-"position.right" = "position.right";
-// TRANSLATORS: Top-Center
-"position.top" = "position.top";
-// TRANSLATORS: Top-Left
-"position.top-left" = "position.top-left";
-// TRANSLATORS: Top-Right
-"position.top-right" = "position.top-right";
-// TRANSLATORS: Post-dial String
-"post-dial-string" = "Post-dial String";
-"ppdc: Adding include directory \"%s\"." = "ppdc: Adding include directory “%s”.";
-"ppdc: Adding/updating UI text from %s." = "ppdc: Adding/updating UI text from %s.";
-"ppdc: Bad boolean value (%s) on line %d of %s." = "ppdc: Bad boolean value (%s) on line %d of %s.";
-"ppdc: Bad font attribute: %s" = "ppdc: Bad font attribute: %s";
-"ppdc: Bad resolution name \"%s\" on line %d of %s." = "ppdc: Bad resolution name “%s” on line %d of %s.";
-"ppdc: Bad status keyword %s on line %d of %s." = "ppdc: Bad status keyword %s on line %d of %s.";
-"ppdc: Bad variable substitution ($%c) on line %d of %s." = "ppdc: Bad variable substitution ($%c) on line %d of %s.";
-"ppdc: Choice found on line %d of %s with no Option." = "ppdc: Choice found on line %d of %s with no Option.";
-"ppdc: Duplicate #po for locale %s on line %d of %s." = "ppdc: Duplicate #po for locale %s on line %d of %s.";
-"ppdc: Expected a filter definition on line %d of %s." = "ppdc: Expected a filter definition on line %d of %s.";
-"ppdc: Expected a program name on line %d of %s." = "ppdc: Expected a program name on line %d of %s.";
-"ppdc: Expected boolean value on line %d of %s." = "ppdc: Expected boolean value on line %d of %s.";
-"ppdc: Expected charset after Font on line %d of %s." = "ppdc: Expected charset after Font on line %d of %s.";
-"ppdc: Expected choice code on line %d of %s." = "ppdc: Expected choice code on line %d of %s.";
-"ppdc: Expected choice name/text on line %d of %s." = "ppdc: Expected choice name/text on line %d of %s.";
-"ppdc: Expected color order for ColorModel on line %d of %s." = "ppdc: Expected color order for ColorModel on line %d of %s.";
-"ppdc: Expected colorspace for ColorModel on line %d of %s." = "ppdc: Expected colorspace for ColorModel on line %d of %s.";
-"ppdc: Expected compression for ColorModel on line %d of %s." = "ppdc: Expected compression for ColorModel on line %d of %s.";
-"ppdc: Expected constraints string for UIConstraints on line %d of %s." = "ppdc: Expected constraints string for UIConstraints on line %d of %s.";
-"ppdc: Expected driver type keyword following DriverType on line %d of %s." = "ppdc: Expected driver type keyword following DriverType on line %d of %s.";
-"ppdc: Expected duplex type after Duplex on line %d of %s." = "ppdc: Expected duplex type after Duplex on line %d of %s.";
-"ppdc: Expected encoding after Font on line %d of %s." = "ppdc: Expected encoding after Font on line %d of %s.";
-"ppdc: Expected filename after #po %s on line %d of %s." = "ppdc: Expected filename after #po %s on line %d of %s.";
-"ppdc: Expected group name/text on line %d of %s." = "ppdc: Expected group name/text on line %d of %s.";
-"ppdc: Expected include filename on line %d of %s." = "ppdc: Expected include filename on line %d of %s.";
-"ppdc: Expected integer on line %d of %s." = "ppdc: Expected integer on line %d of %s.";
-"ppdc: Expected locale after #po on line %d of %s." = "ppdc: Expected locale after #po on line %d of %s.";
-"ppdc: Expected name after %s on line %d of %s." = "ppdc: Expected name after %s on line %d of %s.";
-"ppdc: Expected name after FileName on line %d of %s." = "ppdc: Expected name after FileName on line %d of %s.";
-"ppdc: Expected name after Font on line %d of %s." = "ppdc: Expected name after Font on line %d of %s.";
-"ppdc: Expected name after Manufacturer on line %d of %s." = "ppdc: Expected name after Manufacturer on line %d of %s.";
-"ppdc: Expected name after MediaSize on line %d of %s." = "ppdc: Expected name after MediaSize on line %d of %s.";
-"ppdc: Expected name after ModelName on line %d of %s." = "ppdc: Expected name after ModelName on line %d of %s.";
-"ppdc: Expected name after PCFileName on line %d of %s." = "ppdc: Expected name after PCFileName on line %d of %s.";
-"ppdc: Expected name/text after %s on line %d of %s." = "ppdc: Expected name/text after %s on line %d of %s.";
-"ppdc: Expected name/text after Installable on line %d of %s." = "ppdc: Expected name/text after Installable on line %d of %s.";
-"ppdc: Expected name/text after Resolution on line %d of %s." = "ppdc: Expected name/text after Resolution on line %d of %s.";
-"ppdc: Expected name/text combination for ColorModel on line %d of %s." = "ppdc: Expected name/text combination for ColorModel on line %d of %s.";
-"ppdc: Expected option name/text on line %d of %s." = "ppdc: Expected option name/text on line %d of %s.";
-"ppdc: Expected option section on line %d of %s." = "ppdc: Expected option section on line %d of %s.";
-"ppdc: Expected option type on line %d of %s." = "ppdc: Expected option type on line %d of %s.";
-"ppdc: Expected override field after Resolution on line %d of %s." = "ppdc: Expected override field after Resolution on line %d of %s.";
-"ppdc: Expected quoted string on line %d of %s." = "ppdc: Expected quoted string on line %d of %s.";
-"ppdc: Expected real number on line %d of %s." = "ppdc: Expected real number on line %d of %s.";
-"ppdc: Expected resolution/mediatype following ColorProfile on line %d of %s." = "ppdc: Expected resolution/mediatype following ColorProfile on line %d of %s.";
-"ppdc: Expected resolution/mediatype following SimpleColorProfile on line %d of %s." = "ppdc: Expected resolution/mediatype following SimpleColorProfile on line %d of %s.";
-"ppdc: Expected selector after %s on line %d of %s." = "ppdc: Expected selector after %s on line %d of %s.";
-"ppdc: Expected status after Font on line %d of %s." = "ppdc: Expected status after Font on line %d of %s.";
-"ppdc: Expected string after Copyright on line %d of %s." = "ppdc: Expected string after Copyright on line %d of %s.";
-"ppdc: Expected string after Version on line %d of %s." = "ppdc: Expected string after Version on line %d of %s.";
-"ppdc: Expected two option names on line %d of %s." = "ppdc: Expected two option names on line %d of %s.";
-"ppdc: Expected value after %s on line %d of %s." = "ppdc: Expected value after %s on line %d of %s.";
-"ppdc: Expected version after Font on line %d of %s." = "ppdc: Expected version after Font on line %d of %s.";
-"ppdc: Invalid #include/#po filename \"%s\"." = "ppdc: Invalid #include/#po filename “%s”.";
-"ppdc: Invalid cost for filter on line %d of %s." = "ppdc: Invalid cost for filter on line %d of %s.";
-"ppdc: Invalid empty MIME type for filter on line %d of %s." = "ppdc: Invalid empty MIME type for filter on line %d of %s.";
-"ppdc: Invalid empty program name for filter on line %d of %s." = "ppdc: Invalid empty program name for filter on line %d of %s.";
-"ppdc: Invalid option section \"%s\" on line %d of %s." = "ppdc: Invalid option section “%s” on line %d of %s.";
-"ppdc: Invalid option type \"%s\" on line %d of %s." = "ppdc: Invalid option type “%s” on line %d of %s.";
-"ppdc: Loading driver information file \"%s\"." = "ppdc: Loading driver information file “%s”.";
-"ppdc: Loading messages for locale \"%s\"." = "ppdc: Loading messages for locale “%s”.";
-"ppdc: Loading messages from \"%s\"." = "ppdc: Loading messages from “%s”.";
-"ppdc: Missing #endif at end of \"%s\"." = "ppdc: Missing #endif at end of “%s”.";
-"ppdc: Missing #if on line %d of %s." = "ppdc: Missing #if on line %d of %s.";
-"ppdc: Need a msgid line before any translation strings on line %d of %s." = "ppdc: Need a msgid line before any translation strings on line %d of %s.";
-"ppdc: No message catalog provided for locale %s." = "ppdc: No message catalog provided for locale %s.";
-"ppdc: Option %s defined in two different groups on line %d of %s." = "ppdc: Option %s defined in two different groups on line %d of %s.";
-"ppdc: Option %s redefined with a different type on line %d of %s." = "ppdc: Option %s redefined with a different type on line %d of %s.";
-"ppdc: Option constraint must *name on line %d of %s." = "ppdc: Option constraint must *name on line %d of %s.";
-"ppdc: Too many nested #if's on line %d of %s." = "ppdc: Too many nested #if’s on line %d of %s.";
-"ppdc: Unable to create PPD file \"%s\" - %s." = "ppdc: Unable to create PPD file “%s” - %s.";
-"ppdc: Unable to create output directory %s: %s" = "ppdc: Unable to create output directory %s: %s";
-"ppdc: Unable to create output pipes: %s" = "ppdc: Unable to create output pipes: %s";
-"ppdc: Unable to execute cupstestppd: %s" = "ppdc: Unable to execute cupstestppd: %s";
-"ppdc: Unable to find #po file %s on line %d of %s." = "ppdc: Unable to find #po file %s on line %d of %s.";
-"ppdc: Unable to find include file \"%s\" on line %d of %s." = "ppdc: Unable to find include file “%s” on line %d of %s.";
-"ppdc: Unable to find localization for \"%s\" - %s" = "ppdc: Unable to find localization for “%s” - %s";
-"ppdc: Unable to load localization file \"%s\" - %s" = "ppdc: Unable to load localization file “%s” - %s";
-"ppdc: Unable to open %s: %s" = "ppdc: Unable to open %s: %s";
-"ppdc: Undefined variable (%s) on line %d of %s." = "ppdc: Undefined variable (%s) on line %d of %s.";
-"ppdc: Unexpected text on line %d of %s." = "ppdc: Unexpected text on line %d of %s.";
-"ppdc: Unknown driver type %s on line %d of %s." = "ppdc: Unknown driver type %s on line %d of %s.";
-"ppdc: Unknown duplex type \"%s\" on line %d of %s." = "ppdc: Unknown duplex type “%s” on line %d of %s.";
-"ppdc: Unknown media size \"%s\" on line %d of %s." = "ppdc: Unknown media size “%s” on line %d of %s.";
-"ppdc: Unknown message catalog format for \"%s\"." = "ppdc: Unknown message catalog format for “%s”.";
-"ppdc: Unknown token \"%s\" seen on line %d of %s." = "ppdc: Unknown token “%s” seen on line %d of %s.";
-"ppdc: Unknown trailing characters in real number \"%s\" on line %d of %s." = "ppdc: Unknown trailing characters in real number “%s” on line %d of %s.";
-"ppdc: Unterminated string starting with %c on line %d of %s." = "ppdc: Unterminated string starting with %c on line %d of %s.";
-"ppdc: Warning - overlapping filename \"%s\"." = "ppdc: Warning - overlapping filename “%s”.";
-"ppdc: Writing %s." = "ppdc: Writing %s.";
-"ppdc: Writing PPD files to directory \"%s\"." = "ppdc: Writing PPD files to directory “%s”.";
-"ppdmerge: Bad LanguageVersion \"%s\" in %s." = "ppdmerge: Bad LanguageVersion “%s” in %s.";
-"ppdmerge: Ignoring PPD file %s." = "ppdmerge: Ignoring PPD file %s.";
-"ppdmerge: Unable to backup %s to %s - %s" = "ppdmerge: Unable to backup %s to %s - %s";
-// TRANSLATORS: Pre-dial String
-"pre-dial-string" = "Pre-dial String";
-// TRANSLATORS: Number-Up Layout
-"presentation-direction-number-up" = "Number-Up Layout";
-// TRANSLATORS: Top-bottom, Right-left
-"presentation-direction-number-up.tobottom-toleft" = "Top-bottom, Right-left";
-// TRANSLATORS: Top-bottom, Left-right
-"presentation-direction-number-up.tobottom-toright" = "Top-bottom, Left-right";
-// TRANSLATORS: Right-left, Top-bottom
-"presentation-direction-number-up.toleft-tobottom" = "Right-left, Top-bottom";
-// TRANSLATORS: Right-left, Bottom-top
-"presentation-direction-number-up.toleft-totop" = "Right-left, Bottom-top";
-// TRANSLATORS: Left-right, Top-bottom
-"presentation-direction-number-up.toright-tobottom" = "Left-right, Top-bottom";
-// TRANSLATORS: Left-right, Bottom-top
-"presentation-direction-number-up.toright-totop" = "Left-right, Bottom-top";
-// TRANSLATORS: Bottom-top, Right-left
-"presentation-direction-number-up.totop-toleft" = "Bottom-top, Right-left";
-// TRANSLATORS: Bottom-top, Left-right
-"presentation-direction-number-up.totop-toright" = "Bottom-top, Left-right";
-// TRANSLATORS: Print Accuracy
-"print-accuracy" = "Print Accuracy";
-// TRANSLATORS: Print Base
-"print-base" = "Print Base";
-// TRANSLATORS: Print Base Actual
-"print-base-actual" = "Print Base Actual";
-// TRANSLATORS: Brim
-"print-base.brim" = "Brim";
-// TRANSLATORS: None
-"print-base.none" = "None";
-// TRANSLATORS: Raft
-"print-base.raft" = "Raft";
-// TRANSLATORS: Skirt
-"print-base.skirt" = "Skirt";
-// TRANSLATORS: Standard
-"print-base.standard" = "Standard";
-// TRANSLATORS: Print Color Mode
-"print-color-mode" = "Print Color Mode";
-// TRANSLATORS: Automatic
-"print-color-mode.auto" = "Automatic";
-// TRANSLATORS: Auto Monochrome
-"print-color-mode.auto-monochrome" = "Auto Monochrome";
-// TRANSLATORS: Text
-"print-color-mode.bi-level" = "Text";
-// TRANSLATORS: Color
-"print-color-mode.color" = "Color";
-// TRANSLATORS: Highlight
-"print-color-mode.highlight" = "Highlight";
-// TRANSLATORS: Monochrome
-"print-color-mode.monochrome" = "Monochrome";
-// TRANSLATORS: Process Text
-"print-color-mode.process-bi-level" = "Process Text";
-// TRANSLATORS: Process Monochrome
-"print-color-mode.process-monochrome" = "Process Monochrome";
-// TRANSLATORS: Print Optimization
-"print-content-optimize" = "Print Optimization";
-// TRANSLATORS: Print Content Optimize Actual
-"print-content-optimize-actual" = "Print Optimization";
-// TRANSLATORS: Automatic
-"print-content-optimize.auto" = "Automatic";
-// TRANSLATORS: Graphics
-"print-content-optimize.graphic" = "Graphics";
-// TRANSLATORS: Graphics
-"print-content-optimize.graphics" = "Graphics";
-// TRANSLATORS: Photo
-"print-content-optimize.photo" = "Photo";
-// TRANSLATORS: Text
-"print-content-optimize.text" = "Text";
-// TRANSLATORS: Text and Graphics
-"print-content-optimize.text-and-graphic" = "Text and Graphics";
-// TRANSLATORS: Text And Graphics
-"print-content-optimize.text-and-graphics" = "Text and Graphics";
-// TRANSLATORS: Print Objects
-"print-objects" = "Print Objects";
-// TRANSLATORS: Print Quality
-"print-quality" = "Print Quality";
-// TRANSLATORS: Draft
-"print-quality.3" = "Draft";
-// TRANSLATORS: Normal
-"print-quality.4" = "Normal";
-// TRANSLATORS: High
-"print-quality.5" = "High";
-// TRANSLATORS: Print Rendering Intent
-"print-rendering-intent" = "Print Rendering Intent";
-// TRANSLATORS: Absolute
-"print-rendering-intent.absolute" = "Absolute";
-// TRANSLATORS: Automatic
-"print-rendering-intent.auto" = "Automatic";
-// TRANSLATORS: Perceptual
-"print-rendering-intent.perceptual" = "Perceptual";
-// TRANSLATORS: Relative
-"print-rendering-intent.relative" = "Relative";
-// TRANSLATORS: Relative w/Black Point Compensation
-"print-rendering-intent.relative-bpc" = "Relative w/Black Point Compensation";
-// TRANSLATORS: Saturation
-"print-rendering-intent.saturation" = "Saturation";
-// TRANSLATORS: Print Scaling
-"print-scaling" = "Print Scaling";
-// TRANSLATORS: Automatic
-"print-scaling.auto" = "Automatic";
-// TRANSLATORS: Auto-fit
-"print-scaling.auto-fit" = "Auto-fit";
-// TRANSLATORS: Fill
-"print-scaling.fill" = "Fill";
-// TRANSLATORS: Fit
-"print-scaling.fit" = "Fit";
-// TRANSLATORS: None
-"print-scaling.none" = "None";
-// TRANSLATORS: Print Supports
-"print-supports" = "Print Supports";
-// TRANSLATORS: Print Supports Actual
-"print-supports-actual" = "Print Supports Actual";
-// TRANSLATORS: With Specified Material
-"print-supports.material" = "With Specified Material";
-// TRANSLATORS: None
-"print-supports.none" = "None";
-// TRANSLATORS: Standard
-"print-supports.standard" = "Standard";
-"printer %s disabled since %s -" = "printer %s disabled since %s -";
-"printer %s is holding new jobs. enabled since %s" = "printer %s is holding new jobs. enabled since %s";
-"printer %s is idle. enabled since %s" = "printer %s is idle. enabled since %s";
-"printer %s now printing %s-%d. enabled since %s" = "printer %s now printing %s-%d. enabled since %s";
-"printer %s/%s disabled since %s -" = "printer %s/%s disabled since %s -";
-"printer %s/%s is idle. enabled since %s" = "printer %s/%s is idle. enabled since %s";
-"printer %s/%s now printing %s-%d. enabled since %s" = "printer %s/%s now printing %s-%d. enabled since %s";
-// TRANSLATORS: Printer Kind
-"printer-kind" = "Printer Kind";
-// TRANSLATORS: Disc
-"printer-kind.disc" = "Disc";
-// TRANSLATORS: Document
-"printer-kind.document" = "Document";
-// TRANSLATORS: Envelope
-"printer-kind.envelope" = "Envelope";
-// TRANSLATORS: Label
-"printer-kind.label" = "Label";
-// TRANSLATORS: Large Format
-"printer-kind.large-format" = "Large format";
-// TRANSLATORS: Photo
-"printer-kind.photo" = "Photo";
-// TRANSLATORS: Postcard
-"printer-kind.postcard" = "Postcard";
-// TRANSLATORS: Receipt
-"printer-kind.receipt" = "Receipt";
-// TRANSLATORS: Roll
-"printer-kind.roll" = "Roll";
-// TRANSLATORS: Message From Operator
-"printer-message-from-operator" = "Message From Operator";
-// TRANSLATORS: Print Resolution
-"printer-resolution" = "Print Resolution";
-// TRANSLATORS: Printer State
-"printer-state" = "Printer State";
-// TRANSLATORS: Detailed Printer State
-"printer-state-reasons" = "Detailed Printer State";
-// TRANSLATORS: Old Alerts Have Been Removed
-"printer-state-reasons.alert-removal-of-binary-change-entry" = "Old Alerts Have Been Removed";
-// TRANSLATORS: Bander Added
-"printer-state-reasons.bander-added" = "Bander Added";
-// TRANSLATORS: Bander Almost Empty
-"printer-state-reasons.bander-almost-empty" = "Bander Almost Empty";
-// TRANSLATORS: Bander Almost Full
-"printer-state-reasons.bander-almost-full" = "Bander Almost Full";
-// TRANSLATORS: Bander At Limit
-"printer-state-reasons.bander-at-limit" = "Bander At Limit";
-// TRANSLATORS: Bander Closed
-"printer-state-reasons.bander-closed" = "Bander Closed";
-// TRANSLATORS: Bander Configuration Change
-"printer-state-reasons.bander-configuration-change" = "Bander Configuration Change";
-// TRANSLATORS: Bander Cover Closed
-"printer-state-reasons.bander-cover-closed" = "Bander Cover Closed";
-// TRANSLATORS: Bander Cover Open
-"printer-state-reasons.bander-cover-open" = "Bander Cover Open";
-// TRANSLATORS: Bander Empty
-"printer-state-reasons.bander-empty" = "Bander Empty";
-// TRANSLATORS: Bander Full
-"printer-state-reasons.bander-full" = "Bander Full";
-// TRANSLATORS: Bander Interlock Closed
-"printer-state-reasons.bander-interlock-closed" = "Bander Interlock Closed";
-// TRANSLATORS: Bander Interlock Open
-"printer-state-reasons.bander-interlock-open" = "Bander Interlock Open";
-// TRANSLATORS: Bander Jam
-"printer-state-reasons.bander-jam" = "Bander Jam";
-// TRANSLATORS: Bander Life Almost Over
-"printer-state-reasons.bander-life-almost-over" = "Bander Life Almost Over";
-// TRANSLATORS: Bander Life Over
-"printer-state-reasons.bander-life-over" = "Bander Life Over";
-// TRANSLATORS: Bander Memory Exhausted
-"printer-state-reasons.bander-memory-exhausted" = "Bander Memory Exhausted";
-// TRANSLATORS: Bander Missing
-"printer-state-reasons.bander-missing" = "Bander Missing";
-// TRANSLATORS: Bander Motor Failure
-"printer-state-reasons.bander-motor-failure" = "Bander Motor Failure";
-// TRANSLATORS: Bander Near Limit
-"printer-state-reasons.bander-near-limit" = "Bander Near Limit";
-// TRANSLATORS: Bander Offline
-"printer-state-reasons.bander-offline" = "Bander Offline";
-// TRANSLATORS: Bander Opened
-"printer-state-reasons.bander-opened" = "Bander Opened";
-// TRANSLATORS: Bander Over Temperature
-"printer-state-reasons.bander-over-temperature" = "Bander Over Temperature";
-// TRANSLATORS: Bander Power Saver
-"printer-state-reasons.bander-power-saver" = "Bander Power Saver";
-// TRANSLATORS: Bander Recoverable Failure
-"printer-state-reasons.bander-recoverable-failure" = "Bander Recoverable Failure";
-// TRANSLATORS: Bander Recoverable Storage
-"printer-state-reasons.bander-recoverable-storage" = "Bander Recoverable Storage";
-// TRANSLATORS: Bander Removed
-"printer-state-reasons.bander-removed" = "Bander Removed";
-// TRANSLATORS: Bander Resource Added
-"printer-state-reasons.bander-resource-added" = "Bander Resource Added";
-// TRANSLATORS: Bander Resource Removed
-"printer-state-reasons.bander-resource-removed" = "Bander Resource Removed";
-// TRANSLATORS: Bander Thermistor Failure
-"printer-state-reasons.bander-thermistor-failure" = "Bander Thermistor Failure";
-// TRANSLATORS: Bander Timing Failure
-"printer-state-reasons.bander-timing-failure" = "Bander Timing Failure";
-// TRANSLATORS: Bander Turned Off
-"printer-state-reasons.bander-turned-off" = "Bander Turned Off";
-// TRANSLATORS: Bander Turned On
-"printer-state-reasons.bander-turned-on" = "Bander Turned On";
-// TRANSLATORS: Bander Under Temperature
-"printer-state-reasons.bander-under-temperature" = "Bander Under Temperature";
-// TRANSLATORS: Bander Unrecoverable Failure
-"printer-state-reasons.bander-unrecoverable-failure" = "Bander Unrecoverable Failure";
-// TRANSLATORS: Bander Unrecoverable Storage Error
-"printer-state-reasons.bander-unrecoverable-storage-error" = "Bander Unrecoverable Storage Error";
-// TRANSLATORS: Bander Warming Up
-"printer-state-reasons.bander-warming-up" = "Bander Warming Up";
-// TRANSLATORS: Binder Added
-"printer-state-reasons.binder-added" = "Binder Added";
-// TRANSLATORS: Binder Almost Empty
-"printer-state-reasons.binder-almost-empty" = "Binder Almost Empty";
-// TRANSLATORS: Binder Almost Full
-"printer-state-reasons.binder-almost-full" = "Binder Almost Full";
-// TRANSLATORS: Binder At Limit
-"printer-state-reasons.binder-at-limit" = "Binder At Limit";
-// TRANSLATORS: Binder Closed
-"printer-state-reasons.binder-closed" = "Binder Closed";
-// TRANSLATORS: Binder Configuration Change
-"printer-state-reasons.binder-configuration-change" = "Binder Configuration Change";
-// TRANSLATORS: Binder Cover Closed
-"printer-state-reasons.binder-cover-closed" = "Binder Cover Closed";
-// TRANSLATORS: Binder Cover Open
-"printer-state-reasons.binder-cover-open" = "Binder Cover Open";
-// TRANSLATORS: Binder Empty
-"printer-state-reasons.binder-empty" = "Binder Empty";
-// TRANSLATORS: Binder Full
-"printer-state-reasons.binder-full" = "Binder Full";
-// TRANSLATORS: Binder Interlock Closed
-"printer-state-reasons.binder-interlock-closed" = "Binder Interlock Closed";
-// TRANSLATORS: Binder Interlock Open
-"printer-state-reasons.binder-interlock-open" = "Binder Interlock Open";
-// TRANSLATORS: Binder Jam
-"printer-state-reasons.binder-jam" = "Binder Jam";
-// TRANSLATORS: Binder Life Almost Over
-"printer-state-reasons.binder-life-almost-over" = "Binder Life Almost Over";
-// TRANSLATORS: Binder Life Over
-"printer-state-reasons.binder-life-over" = "Binder Life Over";
-// TRANSLATORS: Binder Memory Exhausted
-"printer-state-reasons.binder-memory-exhausted" = "Binder Memory Exhausted";
-// TRANSLATORS: Binder Missing
-"printer-state-reasons.binder-missing" = "Binder Missing";
-// TRANSLATORS: Binder Motor Failure
-"printer-state-reasons.binder-motor-failure" = "Binder Motor Failure";
-// TRANSLATORS: Binder Near Limit
-"printer-state-reasons.binder-near-limit" = "Binder Near Limit";
-// TRANSLATORS: Binder Offline
-"printer-state-reasons.binder-offline" = "Binder Offline";
-// TRANSLATORS: Binder Opened
-"printer-state-reasons.binder-opened" = "Binder Opened";
-// TRANSLATORS: Binder Over Temperature
-"printer-state-reasons.binder-over-temperature" = "Binder Over Temperature";
-// TRANSLATORS: Binder Power Saver
-"printer-state-reasons.binder-power-saver" = "Binder Power Saver";
-// TRANSLATORS: Binder Recoverable Failure
-"printer-state-reasons.binder-recoverable-failure" = "Binder Recoverable Failure";
-// TRANSLATORS: Binder Recoverable Storage
-"printer-state-reasons.binder-recoverable-storage" = "Binder Recoverable Storage";
-// TRANSLATORS: Binder Removed
-"printer-state-reasons.binder-removed" = "Binder Removed";
-// TRANSLATORS: Binder Resource Added
-"printer-state-reasons.binder-resource-added" = "Binder Resource Added";
-// TRANSLATORS: Binder Resource Removed
-"printer-state-reasons.binder-resource-removed" = "Binder Resource Removed";
-// TRANSLATORS: Binder Thermistor Failure
-"printer-state-reasons.binder-thermistor-failure" = "Binder Thermistor Failure";
-// TRANSLATORS: Binder Timing Failure
-"printer-state-reasons.binder-timing-failure" = "Binder Timing Failure";
-// TRANSLATORS: Binder Turned Off
-"printer-state-reasons.binder-turned-off" = "Binder Turned Off";
-// TRANSLATORS: Binder Turned On
-"printer-state-reasons.binder-turned-on" = "Binder Turned On";
-// TRANSLATORS: Binder Under Temperature
-"printer-state-reasons.binder-under-temperature" = "Binder Under Temperature";
-// TRANSLATORS: Binder Unrecoverable Failure
-"printer-state-reasons.binder-unrecoverable-failure" = "Binder Unrecoverable Failure";
-// TRANSLATORS: Binder Unrecoverable Storage Error
-"printer-state-reasons.binder-unrecoverable-storage-error" = "Binder Unrecoverable Storage Error";
-// TRANSLATORS: Binder Warming Up
-"printer-state-reasons.binder-warming-up" = "Binder Warming Up";
-// TRANSLATORS: Camera Failure
-"printer-state-reasons.camera-failure" = "Camera Failure";
-// TRANSLATORS: Chamber Cooling
-"printer-state-reasons.chamber-cooling" = "Chamber Cooling";
-// TRANSLATORS: Chamber Failure
-"printer-state-reasons.chamber-failure" = "Chamber Failure";
-// TRANSLATORS: Chamber Heating
-"printer-state-reasons.chamber-heating" = "Chamber Heating";
-// TRANSLATORS: Chamber Temperature High
-"printer-state-reasons.chamber-temperature-high" = "Chamber Temperature High";
-// TRANSLATORS: Chamber Temperature Low
-"printer-state-reasons.chamber-temperature-low" = "Chamber Temperature Low";
-// TRANSLATORS: Cleaner Life Almost Over
-"printer-state-reasons.cleaner-life-almost-over" = "Cleaner Life Almost Over";
-// TRANSLATORS: Cleaner Life Over
-"printer-state-reasons.cleaner-life-over" = "Cleaner Life Over";
-// TRANSLATORS: Configuration Change
-"printer-state-reasons.configuration-change" = "Configuration Change";
-// TRANSLATORS: Connecting To Device
-"printer-state-reasons.connecting-to-device" = "Connecting To Device";
-// TRANSLATORS: Cover Open
-"printer-state-reasons.cover-open" = "Cover Open";
-// TRANSLATORS: Deactivated
-"printer-state-reasons.deactivated" = "Deactivated";
-// TRANSLATORS: Developer Empty
-"printer-state-reasons.developer-empty" = "Developer Empty";
-// TRANSLATORS: Developer Low
-"printer-state-reasons.developer-low" = "Developer Low";
-// TRANSLATORS: Die Cutter Added
-"printer-state-reasons.die-cutter-added" = "Die Cutter Added";
-// TRANSLATORS: Die Cutter Almost Empty
-"printer-state-reasons.die-cutter-almost-empty" = "Die Cutter Almost Empty";
-// TRANSLATORS: Die Cutter Almost Full
-"printer-state-reasons.die-cutter-almost-full" = "Die Cutter Almost Full";
-// TRANSLATORS: Die Cutter At Limit
-"printer-state-reasons.die-cutter-at-limit" = "Die Cutter At Limit";
-// TRANSLATORS: Die Cutter Closed
-"printer-state-reasons.die-cutter-closed" = "Die Cutter Closed";
-// TRANSLATORS: Die Cutter Configuration Change
-"printer-state-reasons.die-cutter-configuration-change" = "Die Cutter Configuration Change";
-// TRANSLATORS: Die Cutter Cover Closed
-"printer-state-reasons.die-cutter-cover-closed" = "Die Cutter Cover Closed";
-// TRANSLATORS: Die Cutter Cover Open
-"printer-state-reasons.die-cutter-cover-open" = "Die Cutter Cover Open";
-// TRANSLATORS: Die Cutter Empty
-"printer-state-reasons.die-cutter-empty" = "Die Cutter Empty";
-// TRANSLATORS: Die Cutter Full
-"printer-state-reasons.die-cutter-full" = "Die Cutter Full";
-// TRANSLATORS: Die Cutter Interlock Closed
-"printer-state-reasons.die-cutter-interlock-closed" = "Die Cutter Interlock Closed";
-// TRANSLATORS: Die Cutter Interlock Open
-"printer-state-reasons.die-cutter-interlock-open" = "Die Cutter Interlock Open";
-// TRANSLATORS: Die Cutter Jam
-"printer-state-reasons.die-cutter-jam" = "Die Cutter Jam";
-// TRANSLATORS: Die Cutter Life Almost Over
-"printer-state-reasons.die-cutter-life-almost-over" = "Die Cutter Life Almost Over";
-// TRANSLATORS: Die Cutter Life Over
-"printer-state-reasons.die-cutter-life-over" = "Die Cutter Life Over";
-// TRANSLATORS: Die Cutter Memory Exhausted
-"printer-state-reasons.die-cutter-memory-exhausted" = "Die Cutter Memory Exhausted";
-// TRANSLATORS: Die Cutter Missing
-"printer-state-reasons.die-cutter-missing" = "Die Cutter Missing";
-// TRANSLATORS: Die Cutter Motor Failure
-"printer-state-reasons.die-cutter-motor-failure" = "Die Cutter Motor Failure";
-// TRANSLATORS: Die Cutter Near Limit
-"printer-state-reasons.die-cutter-near-limit" = "Die Cutter Near Limit";
-// TRANSLATORS: Die Cutter Offline
-"printer-state-reasons.die-cutter-offline" = "Die Cutter Offline";
-// TRANSLATORS: Die Cutter Opened
-"printer-state-reasons.die-cutter-opened" = "Die Cutter Opened";
-// TRANSLATORS: Die Cutter Over Temperature
-"printer-state-reasons.die-cutter-over-temperature" = "Die Cutter Over Temperature";
-// TRANSLATORS: Die Cutter Power Saver
-"printer-state-reasons.die-cutter-power-saver" = "Die Cutter Power Saver";
-// TRANSLATORS: Die Cutter Recoverable Failure
-"printer-state-reasons.die-cutter-recoverable-failure" = "Die Cutter Recoverable Failure";
-// TRANSLATORS: Die Cutter Recoverable Storage
-"printer-state-reasons.die-cutter-recoverable-storage" = "Die Cutter Recoverable Storage";
-// TRANSLATORS: Die Cutter Removed
-"printer-state-reasons.die-cutter-removed" = "Die Cutter Removed";
-// TRANSLATORS: Die Cutter Resource Added
-"printer-state-reasons.die-cutter-resource-added" = "Die Cutter Resource Added";
-// TRANSLATORS: Die Cutter Resource Removed
-"printer-state-reasons.die-cutter-resource-removed" = "Die Cutter Resource Removed";
-// TRANSLATORS: Die Cutter Thermistor Failure
-"printer-state-reasons.die-cutter-thermistor-failure" = "Die Cutter Thermistor Failure";
-// TRANSLATORS: Die Cutter Timing Failure
-"printer-state-reasons.die-cutter-timing-failure" = "Die Cutter Timing Failure";
-// TRANSLATORS: Die Cutter Turned Off
-"printer-state-reasons.die-cutter-turned-off" = "Die Cutter Turned Off";
-// TRANSLATORS: Die Cutter Turned On
-"printer-state-reasons.die-cutter-turned-on" = "Die Cutter Turned On";
-// TRANSLATORS: Die Cutter Under Temperature
-"printer-state-reasons.die-cutter-under-temperature" = "Die Cutter Under Temperature";
-// TRANSLATORS: Die Cutter Unrecoverable Failure
-"printer-state-reasons.die-cutter-unrecoverable-failure" = "Die Cutter Unrecoverable Failure";
-// TRANSLATORS: Die Cutter Unrecoverable Storage Error
-"printer-state-reasons.die-cutter-unrecoverable-storage-error" = "Die Cutter Unrecoverable Storage Error";
-// TRANSLATORS: Die Cutter Warming Up
-"printer-state-reasons.die-cutter-warming-up" = "Die Cutter Warming Up";
-// TRANSLATORS: Door Open
-"printer-state-reasons.door-open" = "Door Open";
-// TRANSLATORS: Extruder Cooling
-"printer-state-reasons.extruder-cooling" = "Extruder Cooling";
-// TRANSLATORS: Extruder Failure
-"printer-state-reasons.extruder-failure" = "Extruder Failure";
-// TRANSLATORS: Extruder Heating
-"printer-state-reasons.extruder-heating" = "Extruder Heating";
-// TRANSLATORS: Extruder Jam
-"printer-state-reasons.extruder-jam" = "Extruder Jam";
-// TRANSLATORS: Extruder Temperature High
-"printer-state-reasons.extruder-temperature-high" = "Extruder Temperature High";
-// TRANSLATORS: Extruder Temperature Low
-"printer-state-reasons.extruder-temperature-low" = "Extruder Temperature Low";
-// TRANSLATORS: Fan Failure
-"printer-state-reasons.fan-failure" = "Fan Failure";
-// TRANSLATORS: Fax Modem Life Almost Over
-"printer-state-reasons.fax-modem-life-almost-over" = "Fax Modem Life Almost Over";
-// TRANSLATORS: Fax Modem Life Over
-"printer-state-reasons.fax-modem-life-over" = "Fax Modem Life Over";
-// TRANSLATORS: Fax Modem Missing
-"printer-state-reasons.fax-modem-missing" = "Fax Modem Missing";
-// TRANSLATORS: Fax Modem Turned Off
-"printer-state-reasons.fax-modem-turned-off" = "Fax Modem Turned Off";
-// TRANSLATORS: Fax Modem Turned On
-"printer-state-reasons.fax-modem-turned-on" = "Fax Modem Turned On";
-// TRANSLATORS: Folder Added
-"printer-state-reasons.folder-added" = "Folder Added";
-// TRANSLATORS: Folder Almost Empty
-"printer-state-reasons.folder-almost-empty" = "Folder Almost Empty";
-// TRANSLATORS: Folder Almost Full
-"printer-state-reasons.folder-almost-full" = "Folder Almost Full";
-// TRANSLATORS: Folder At Limit
-"printer-state-reasons.folder-at-limit" = "Folder At Limit";
-// TRANSLATORS: Folder Closed
-"printer-state-reasons.folder-closed" = "Folder Closed";
-// TRANSLATORS: Folder Configuration Change
-"printer-state-reasons.folder-configuration-change" = "Folder Configuration Change";
-// TRANSLATORS: Folder Cover Closed
-"printer-state-reasons.folder-cover-closed" = "Folder Cover Closed";
-// TRANSLATORS: Folder Cover Open
-"printer-state-reasons.folder-cover-open" = "Folder Cover Open";
-// TRANSLATORS: Folder Empty
-"printer-state-reasons.folder-empty" = "Folder Empty";
-// TRANSLATORS: Folder Full
-"printer-state-reasons.folder-full" = "Folder Full";
-// TRANSLATORS: Folder Interlock Closed
-"printer-state-reasons.folder-interlock-closed" = "Folder Interlock Closed";
-// TRANSLATORS: Folder Interlock Open
-"printer-state-reasons.folder-interlock-open" = "Folder Interlock Open";
-// TRANSLATORS: Folder Jam
-"printer-state-reasons.folder-jam" = "Folder Jam";
-// TRANSLATORS: Folder Life Almost Over
-"printer-state-reasons.folder-life-almost-over" = "Folder Life Almost Over";
-// TRANSLATORS: Folder Life Over
-"printer-state-reasons.folder-life-over" = "Folder Life Over";
-// TRANSLATORS: Folder Memory Exhausted
-"printer-state-reasons.folder-memory-exhausted" = "Folder Memory Exhausted";
-// TRANSLATORS: Folder Missing
-"printer-state-reasons.folder-missing" = "Folder Missing";
-// TRANSLATORS: Folder Motor Failure
-"printer-state-reasons.folder-motor-failure" = "Folder Motor Failure";
-// TRANSLATORS: Folder Near Limit
-"printer-state-reasons.folder-near-limit" = "Folder Near Limit";
-// TRANSLATORS: Folder Offline
-"printer-state-reasons.folder-offline" = "Folder Offline";
-// TRANSLATORS: Folder Opened
-"printer-state-reasons.folder-opened" = "Folder Opened";
-// TRANSLATORS: Folder Over Temperature
-"printer-state-reasons.folder-over-temperature" = "Folder Over Temperature";
-// TRANSLATORS: Folder Power Saver
-"printer-state-reasons.folder-power-saver" = "Folder Power Saver";
-// TRANSLATORS: Folder Recoverable Failure
-"printer-state-reasons.folder-recoverable-failure" = "Folder Recoverable Failure";
-// TRANSLATORS: Folder Recoverable Storage
-"printer-state-reasons.folder-recoverable-storage" = "Folder Recoverable Storage";
-// TRANSLATORS: Folder Removed
-"printer-state-reasons.folder-removed" = "Folder Removed";
-// TRANSLATORS: Folder Resource Added
-"printer-state-reasons.folder-resource-added" = "Folder Resource Added";
-// TRANSLATORS: Folder Resource Removed
-"printer-state-reasons.folder-resource-removed" = "Folder Resource Removed";
-// TRANSLATORS: Folder Thermistor Failure
-"printer-state-reasons.folder-thermistor-failure" = "Folder Thermistor Failure";
-// TRANSLATORS: Folder Timing Failure
-"printer-state-reasons.folder-timing-failure" = "Folder Timing Failure";
-// TRANSLATORS: Folder Turned Off
-"printer-state-reasons.folder-turned-off" = "Folder Turned Off";
-// TRANSLATORS: Folder Turned On
-"printer-state-reasons.folder-turned-on" = "Folder Turned On";
-// TRANSLATORS: Folder Under Temperature
-"printer-state-reasons.folder-under-temperature" = "Folder Under Temperature";
-// TRANSLATORS: Folder Unrecoverable Failure
-"printer-state-reasons.folder-unrecoverable-failure" = "Folder Unrecoverable Failure";
-// TRANSLATORS: Folder Unrecoverable Storage Error
-"printer-state-reasons.folder-unrecoverable-storage-error" = "Folder Unrecoverable Storage Error";
-// TRANSLATORS: Folder Warming Up
-"printer-state-reasons.folder-warming-up" = "Folder Warming Up";
-// TRANSLATORS: Fuser temperature high
-"printer-state-reasons.fuser-over-temp" = "Fuser Over Temp";
-// TRANSLATORS: Fuser temperature low
-"printer-state-reasons.fuser-under-temp" = "Fuser Under Temp";
-// TRANSLATORS: Hold New Jobs
-"printer-state-reasons.hold-new-jobs" = "Hold New Jobs";
-// TRANSLATORS: Identify Printer
-"printer-state-reasons.identify-printer-requested" = "Identify Printer";
-// TRANSLATORS: Imprinter Added
-"printer-state-reasons.imprinter-added" = "Imprinter Added";
-// TRANSLATORS: Imprinter Almost Empty
-"printer-state-reasons.imprinter-almost-empty" = "Imprinter Almost Empty";
-// TRANSLATORS: Imprinter Almost Full
-"printer-state-reasons.imprinter-almost-full" = "Imprinter Almost Full";
-// TRANSLATORS: Imprinter At Limit
-"printer-state-reasons.imprinter-at-limit" = "Imprinter At Limit";
-// TRANSLATORS: Imprinter Closed
-"printer-state-reasons.imprinter-closed" = "Imprinter Closed";
-// TRANSLATORS: Imprinter Configuration Change
-"printer-state-reasons.imprinter-configuration-change" = "Imprinter Configuration Change";
-// TRANSLATORS: Imprinter Cover Closed
-"printer-state-reasons.imprinter-cover-closed" = "Imprinter Cover Closed";
-// TRANSLATORS: Imprinter Cover Open
-"printer-state-reasons.imprinter-cover-open" = "Imprinter Cover Open";
-// TRANSLATORS: Imprinter Empty
-"printer-state-reasons.imprinter-empty" = "Imprinter Empty";
-// TRANSLATORS: Imprinter Full
-"printer-state-reasons.imprinter-full" = "Imprinter Full";
-// TRANSLATORS: Imprinter Interlock Closed
-"printer-state-reasons.imprinter-interlock-closed" = "Imprinter Interlock Closed";
-// TRANSLATORS: Imprinter Interlock Open
-"printer-state-reasons.imprinter-interlock-open" = "Imprinter Interlock Open";
-// TRANSLATORS: Imprinter Jam
-"printer-state-reasons.imprinter-jam" = "Imprinter Jam";
-// TRANSLATORS: Imprinter Life Almost Over
-"printer-state-reasons.imprinter-life-almost-over" = "Imprinter Life Almost Over";
-// TRANSLATORS: Imprinter Life Over
-"printer-state-reasons.imprinter-life-over" = "Imprinter Life Over";
-// TRANSLATORS: Imprinter Memory Exhausted
-"printer-state-reasons.imprinter-memory-exhausted" = "Imprinter Memory Exhausted";
-// TRANSLATORS: Imprinter Missing
-"printer-state-reasons.imprinter-missing" = "Imprinter Missing";
-// TRANSLATORS: Imprinter Motor Failure
-"printer-state-reasons.imprinter-motor-failure" = "Imprinter Motor Failure";
-// TRANSLATORS: Imprinter Near Limit
-"printer-state-reasons.imprinter-near-limit" = "Imprinter Near Limit";
-// TRANSLATORS: Imprinter Offline
-"printer-state-reasons.imprinter-offline" = "Imprinter Offline";
-// TRANSLATORS: Imprinter Opened
-"printer-state-reasons.imprinter-opened" = "Imprinter Opened";
-// TRANSLATORS: Imprinter Over Temperature
-"printer-state-reasons.imprinter-over-temperature" = "Imprinter Over Temperature";
-// TRANSLATORS: Imprinter Power Saver
-"printer-state-reasons.imprinter-power-saver" = "Imprinter Power Saver";
-// TRANSLATORS: Imprinter Recoverable Failure
-"printer-state-reasons.imprinter-recoverable-failure" = "Imprinter Recoverable Failure";
-// TRANSLATORS: Imprinter Recoverable Storage
-"printer-state-reasons.imprinter-recoverable-storage" = "Imprinter Recoverable Storage";
-// TRANSLATORS: Imprinter Removed
-"printer-state-reasons.imprinter-removed" = "Imprinter Removed";
-// TRANSLATORS: Imprinter Resource Added
-"printer-state-reasons.imprinter-resource-added" = "Imprinter Resource Added";
-// TRANSLATORS: Imprinter Resource Removed
-"printer-state-reasons.imprinter-resource-removed" = "Imprinter Resource Removed";
-// TRANSLATORS: Imprinter Thermistor Failure
-"printer-state-reasons.imprinter-thermistor-failure" = "Imprinter Thermistor Failure";
-// TRANSLATORS: Imprinter Timing Failure
-"printer-state-reasons.imprinter-timing-failure" = "Imprinter Timing Failure";
-// TRANSLATORS: Imprinter Turned Off
-"printer-state-reasons.imprinter-turned-off" = "Imprinter Turned Off";
-// TRANSLATORS: Imprinter Turned On
-"printer-state-reasons.imprinter-turned-on" = "Imprinter Turned On";
-// TRANSLATORS: Imprinter Under Temperature
-"printer-state-reasons.imprinter-under-temperature" = "Imprinter Under Temperature";
-// TRANSLATORS: Imprinter Unrecoverable Failure
-"printer-state-reasons.imprinter-unrecoverable-failure" = "Imprinter Unrecoverable Failure";
-// TRANSLATORS: Imprinter Unrecoverable Storage Error
-"printer-state-reasons.imprinter-unrecoverable-storage-error" = "Imprinter Unrecoverable Storage Error";
-// TRANSLATORS: Imprinter Warming Up
-"printer-state-reasons.imprinter-warming-up" = "Imprinter Warming Up";
-// TRANSLATORS: Input Cannot Feed Size Selected
-"printer-state-reasons.input-cannot-feed-size-selected" = "Input Cannot Feed Size Selected";
-// TRANSLATORS: Input Manual Input Request
-"printer-state-reasons.input-manual-input-request" = "Input Manual Input Request";
-// TRANSLATORS: Input Media Color Change
-"printer-state-reasons.input-media-color-change" = "Input Media Color Change";
-// TRANSLATORS: Input Media Form Parts Change
-"printer-state-reasons.input-media-form-parts-change" = "Input Media Form Parts Change";
-// TRANSLATORS: Input Media Size Change
-"printer-state-reasons.input-media-size-change" = "Input Media Size Change";
-// TRANSLATORS: Input Media Tray Failure
-"printer-state-reasons.input-media-tray-failure" = "Input Media Tray Failure";
-// TRANSLATORS: Input Media Tray Feed Error
-"printer-state-reasons.input-media-tray-feed-error" = "Input Media Tray Feed Error";
-// TRANSLATORS: Input Media Tray Jam
-"printer-state-reasons.input-media-tray-jam" = "Input Media Tray Jam";
-// TRANSLATORS: Input Media Type Change
-"printer-state-reasons.input-media-type-change" = "Input Media Type Change";
-// TRANSLATORS: Input Media Weight Change
-"printer-state-reasons.input-media-weight-change" = "Input Media Weight Change";
-// TRANSLATORS: Input Pick Roller Failure
-"printer-state-reasons.input-pick-roller-failure" = "Input Pick Roller Failure";
-// TRANSLATORS: Input Pick Roller Life Over
-"printer-state-reasons.input-pick-roller-life-over" = "Input Pick Roller Life Over";
-// TRANSLATORS: Input Pick Roller Life Warn
-"printer-state-reasons.input-pick-roller-life-warn" = "Input Pick Roller Life Warn";
-// TRANSLATORS: Input Pick Roller Missing
-"printer-state-reasons.input-pick-roller-missing" = "Input Pick Roller Missing";
-// TRANSLATORS: Input Tray Elevation Failure
-"printer-state-reasons.input-tray-elevation-failure" = "Input Tray Elevation Failure";
-// TRANSLATORS: Paper tray is missing
-"printer-state-reasons.input-tray-missing" = "Input Tray Missing";
-// TRANSLATORS: Input Tray Position Failure
-"printer-state-reasons.input-tray-position-failure" = "Input Tray Position Failure";
-// TRANSLATORS: Inserter Added
-"printer-state-reasons.inserter-added" = "Inserter Added";
-// TRANSLATORS: Inserter Almost Empty
-"printer-state-reasons.inserter-almost-empty" = "Inserter Almost Empty";
-// TRANSLATORS: Inserter Almost Full
-"printer-state-reasons.inserter-almost-full" = "Inserter Almost Full";
-// TRANSLATORS: Inserter At Limit
-"printer-state-reasons.inserter-at-limit" = "Inserter At Limit";
-// TRANSLATORS: Inserter Closed
-"printer-state-reasons.inserter-closed" = "Inserter Closed";
-// TRANSLATORS: Inserter Configuration Change
-"printer-state-reasons.inserter-configuration-change" = "Inserter Configuration Change";
-// TRANSLATORS: Inserter Cover Closed
-"printer-state-reasons.inserter-cover-closed" = "Inserter Cover Closed";
-// TRANSLATORS: Inserter Cover Open
-"printer-state-reasons.inserter-cover-open" = "Inserter Cover Open";
-// TRANSLATORS: Inserter Empty
-"printer-state-reasons.inserter-empty" = "Inserter Empty";
-// TRANSLATORS: Inserter Full
-"printer-state-reasons.inserter-full" = "Inserter Full";
-// TRANSLATORS: Inserter Interlock Closed
-"printer-state-reasons.inserter-interlock-closed" = "Inserter Interlock Closed";
-// TRANSLATORS: Inserter Interlock Open
-"printer-state-reasons.inserter-interlock-open" = "Inserter Interlock Open";
-// TRANSLATORS: Inserter Jam
-"printer-state-reasons.inserter-jam" = "Inserter Jam";
-// TRANSLATORS: Inserter Life Almost Over
-"printer-state-reasons.inserter-life-almost-over" = "Inserter Life Almost Over";
-// TRANSLATORS: Inserter Life Over
-"printer-state-reasons.inserter-life-over" = "Inserter Life Over";
-// TRANSLATORS: Inserter Memory Exhausted
-"printer-state-reasons.inserter-memory-exhausted" = "Inserter Memory Exhausted";
-// TRANSLATORS: Inserter Missing
-"printer-state-reasons.inserter-missing" = "Inserter Missing";
-// TRANSLATORS: Inserter Motor Failure
-"printer-state-reasons.inserter-motor-failure" = "Inserter Motor Failure";
-// TRANSLATORS: Inserter Near Limit
-"printer-state-reasons.inserter-near-limit" = "Inserter Near Limit";
-// TRANSLATORS: Inserter Offline
-"printer-state-reasons.inserter-offline" = "Inserter Offline";
-// TRANSLATORS: Inserter Opened
-"printer-state-reasons.inserter-opened" = "Inserter Opened";
-// TRANSLATORS: Inserter Over Temperature
-"printer-state-reasons.inserter-over-temperature" = "Inserter Over Temperature";
-// TRANSLATORS: Inserter Power Saver
-"printer-state-reasons.inserter-power-saver" = "Inserter Power Saver";
-// TRANSLATORS: Inserter Recoverable Failure
-"printer-state-reasons.inserter-recoverable-failure" = "Inserter Recoverable Failure";
-// TRANSLATORS: Inserter Recoverable Storage
-"printer-state-reasons.inserter-recoverable-storage" = "Inserter Recoverable Storage";
-// TRANSLATORS: Inserter Removed
-"printer-state-reasons.inserter-removed" = "Inserter Removed";
-// TRANSLATORS: Inserter Resource Added
-"printer-state-reasons.inserter-resource-added" = "Inserter Resource Added";
-// TRANSLATORS: Inserter Resource Removed
-"printer-state-reasons.inserter-resource-removed" = "Inserter Resource Removed";
-// TRANSLATORS: Inserter Thermistor Failure
-"printer-state-reasons.inserter-thermistor-failure" = "Inserter Thermistor Failure";
-// TRANSLATORS: Inserter Timing Failure
-"printer-state-reasons.inserter-timing-failure" = "Inserter Timing Failure";
-// TRANSLATORS: Inserter Turned Off
-"printer-state-reasons.inserter-turned-off" = "Inserter Turned Off";
-// TRANSLATORS: Inserter Turned On
-"printer-state-reasons.inserter-turned-on" = "Inserter Turned On";
-// TRANSLATORS: Inserter Under Temperature
-"printer-state-reasons.inserter-under-temperature" = "Inserter Under Temperature";
-// TRANSLATORS: Inserter Unrecoverable Failure
-"printer-state-reasons.inserter-unrecoverable-failure" = "Inserter Unrecoverable Failure";
-// TRANSLATORS: Inserter Unrecoverable Storage Error
-"printer-state-reasons.inserter-unrecoverable-storage-error" = "Inserter Unrecoverable Storage Error";
-// TRANSLATORS: Inserter Warming Up
-"printer-state-reasons.inserter-warming-up" = "Inserter Warming Up";
-// TRANSLATORS: Interlock Closed
-"printer-state-reasons.interlock-closed" = "Interlock Closed";
-// TRANSLATORS: Interlock Open
-"printer-state-reasons.interlock-open" = "Interlock Open";
-// TRANSLATORS: Interpreter Cartridge Added
-"printer-state-reasons.interpreter-cartridge-added" = "Interpreter Cartridge Added";
-// TRANSLATORS: Interpreter Cartridge Removed
-"printer-state-reasons.interpreter-cartridge-deleted" = "Interpreter Cartridge Removed";
-// TRANSLATORS: Interpreter Complex Page Encountered
-"printer-state-reasons.interpreter-complex-page-encountered" = "Interpreter Complex Page Encountered";
-// TRANSLATORS: Interpreter Memory Decrease
-"printer-state-reasons.interpreter-memory-decrease" = "Interpreter Memory Decrease";
-// TRANSLATORS: Interpreter Memory Increase
-"printer-state-reasons.interpreter-memory-increase" = "Interpreter Memory Increase";
-// TRANSLATORS: Interpreter Resource Added
-"printer-state-reasons.interpreter-resource-added" = "Interpreter Resource Added";
-// TRANSLATORS: Interpreter Resource Deleted
-"printer-state-reasons.interpreter-resource-deleted" = "Interpreter Resource Deleted";
-// TRANSLATORS: Printer resource unavailable
-"printer-state-reasons.interpreter-resource-unavailable" = "Interpreter Resource Unavailable";
-// TRANSLATORS: Lamp At End of Life
-"printer-state-reasons.lamp-at-eol" = "Lamp At End of Life";
-// TRANSLATORS: Lamp Failure
-"printer-state-reasons.lamp-failure" = "Lamp Failure";
-// TRANSLATORS: Lamp Near End of Life
-"printer-state-reasons.lamp-near-eol" = "Lamp Near End of Life";
-// TRANSLATORS: Laser At End of Life
-"printer-state-reasons.laser-at-eol" = "Laser At End of Life";
-// TRANSLATORS: Laser Failure
-"printer-state-reasons.laser-failure" = "Laser Failure";
-// TRANSLATORS: Laser Near End of Life
-"printer-state-reasons.laser-near-eol" = "Laser Near End of Life";
-// TRANSLATORS: Envelope Maker Added
-"printer-state-reasons.make-envelope-added" = "Envelope Maker Added";
-// TRANSLATORS: Envelope Maker Almost Empty
-"printer-state-reasons.make-envelope-almost-empty" = "Envelope Maker Almost Empty";
-// TRANSLATORS: Envelope Maker Almost Full
-"printer-state-reasons.make-envelope-almost-full" = "Envelope Maker Almost Full";
-// TRANSLATORS: Envelope Maker At Limit
-"printer-state-reasons.make-envelope-at-limit" = "Envelope Maker At Limit";
-// TRANSLATORS: Envelope Maker Closed
-"printer-state-reasons.make-envelope-closed" = "Envelope Maker Closed";
-// TRANSLATORS: Envelope Maker Configuration Change
-"printer-state-reasons.make-envelope-configuration-change" = "Envelope Maker Configuration Change";
-// TRANSLATORS: Envelope Maker Cover Closed
-"printer-state-reasons.make-envelope-cover-closed" = "Envelope Maker Cover Closed";
-// TRANSLATORS: Envelope Maker Cover Open
-"printer-state-reasons.make-envelope-cover-open" = "Envelope Maker Cover Open";
-// TRANSLATORS: Envelope Maker Empty
-"printer-state-reasons.make-envelope-empty" = "Envelope Maker Empty";
-// TRANSLATORS: Envelope Maker Full
-"printer-state-reasons.make-envelope-full" = "Envelope Maker Full";
-// TRANSLATORS: Envelope Maker Interlock Closed
-"printer-state-reasons.make-envelope-interlock-closed" = "Envelope Maker Interlock Closed";
-// TRANSLATORS: Envelope Maker Interlock Open
-"printer-state-reasons.make-envelope-interlock-open" = "Envelope Maker Interlock Open";
-// TRANSLATORS: Envelope Maker Jam
-"printer-state-reasons.make-envelope-jam" = "Envelope Maker Jam";
-// TRANSLATORS: Envelope Maker Life Almost Over
-"printer-state-reasons.make-envelope-life-almost-over" = "Envelope Maker Life Almost Over";
-// TRANSLATORS: Envelope Maker Life Over
-"printer-state-reasons.make-envelope-life-over" = "Envelope Maker Life Over";
-// TRANSLATORS: Envelope Maker Memory Exhausted
-"printer-state-reasons.make-envelope-memory-exhausted" = "Envelope Maker Memory Exhausted";
-// TRANSLATORS: Envelope Maker Missing
-"printer-state-reasons.make-envelope-missing" = "Envelope Maker Missing";
-// TRANSLATORS: Envelope Maker Motor Failure
-"printer-state-reasons.make-envelope-motor-failure" = "Envelope Maker Motor Failure";
-// TRANSLATORS: Envelope Maker Near Limit
-"printer-state-reasons.make-envelope-near-limit" = "Envelope Maker Near Limit";
-// TRANSLATORS: Envelope Maker Offline
-"printer-state-reasons.make-envelope-offline" = "Envelope Maker Offline";
-// TRANSLATORS: Envelope Maker Opened
-"printer-state-reasons.make-envelope-opened" = "Envelope Maker Opened";
-// TRANSLATORS: Envelope Maker Over Temperature
-"printer-state-reasons.make-envelope-over-temperature" = "Envelope Maker Over Temperature";
-// TRANSLATORS: Envelope Maker Power Saver
-"printer-state-reasons.make-envelope-power-saver" = "Envelope Maker Power Saver";
-// TRANSLATORS: Envelope Maker Recoverable Failure
-"printer-state-reasons.make-envelope-recoverable-failure" = "Envelope Maker Recoverable Failure";
-// TRANSLATORS: Envelope Maker Recoverable Storage
-"printer-state-reasons.make-envelope-recoverable-storage" = "Envelope Maker Recoverable Storage";
-// TRANSLATORS: Envelope Maker Removed
-"printer-state-reasons.make-envelope-removed" = "Envelope Maker Removed";
-// TRANSLATORS: Envelope Maker Resource Added
-"printer-state-reasons.make-envelope-resource-added" = "Envelope Maker Resource Added";
-// TRANSLATORS: Envelope Maker Resource Removed
-"printer-state-reasons.make-envelope-resource-removed" = "Envelope Maker Resource Removed";
-// TRANSLATORS: Envelope Maker Thermistor Failure
-"printer-state-reasons.make-envelope-thermistor-failure" = "Envelope Maker Thermistor Failure";
-// TRANSLATORS: Envelope Maker Timing Failure
-"printer-state-reasons.make-envelope-timing-failure" = "Envelope Maker Timing Failure";
-// TRANSLATORS: Envelope Maker Turned Off
-"printer-state-reasons.make-envelope-turned-off" = "Envelope Maker Turned Off";
-// TRANSLATORS: Envelope Maker Turned On
-"printer-state-reasons.make-envelope-turned-on" = "Envelope Maker Turned On";
-// TRANSLATORS: Envelope Maker Under Temperature
-"printer-state-reasons.make-envelope-under-temperature" = "Envelope Maker Under Temperature";
-// TRANSLATORS: Envelope Maker Unrecoverable Failure
-"printer-state-reasons.make-envelope-unrecoverable-failure" = "Envelope Maker Unrecoverable Failure";
-// TRANSLATORS: Envelope Maker Unrecoverable Storage Error
-"printer-state-reasons.make-envelope-unrecoverable-storage-error" = "Envelope Maker Unrecoverable Storage Error";
-// TRANSLATORS: Envelope Maker Warming Up
-"printer-state-reasons.make-envelope-warming-up" = "Envelope Maker Warming Up";
-// TRANSLATORS: Marker Adjusting Print Quality
-"printer-state-reasons.marker-adjusting-print-quality" = "Marker Adjusting Print Quality";
-// TRANSLATORS: Marker Cleaner Missing
-"printer-state-reasons.marker-cleaner-missing" = "Marker Cleaner Missing";
-// TRANSLATORS: Marker Developer Almost Empty
-"printer-state-reasons.marker-developer-almost-empty" = "Marker Developer Almost Empty";
-// TRANSLATORS: Marker Developer Empty
-"printer-state-reasons.marker-developer-empty" = "Marker Developer Empty";
-// TRANSLATORS: Marker Developer Missing
-"printer-state-reasons.marker-developer-missing" = "Marker Developer Missing";
-// TRANSLATORS: Marker Fuser Missing
-"printer-state-reasons.marker-fuser-missing" = "Marker Fuser Missing";
-// TRANSLATORS: Marker Fuser Thermistor Failure
-"printer-state-reasons.marker-fuser-thermistor-failure" = "Marker Fuser Thermistor Failure";
-// TRANSLATORS: Marker Fuser Timing Failure
-"printer-state-reasons.marker-fuser-timing-failure" = "Marker Fuser Timing Failure";
-// TRANSLATORS: Marker Ink Almost Empty
-"printer-state-reasons.marker-ink-almost-empty" = "Low ink";
-// TRANSLATORS: Marker Ink Empty
-"printer-state-reasons.marker-ink-empty" = "Ink empty";
-// TRANSLATORS: Marker Ink Missing
-"printer-state-reasons.marker-ink-missing" = "Ink missing";
-// TRANSLATORS: Marker Opc Missing
-"printer-state-reasons.marker-opc-missing" = "OPC missing";
-// TRANSLATORS: Marker Print Ribbon Almost Empty
-"printer-state-reasons.marker-print-ribbon-almost-empty" = "Print ribbon Almost Empty";
-// TRANSLATORS: Marker Print Ribbon Empty
-"printer-state-reasons.marker-print-ribbon-empty" = "Print ribbon Empty";
-// TRANSLATORS: Marker Print Ribbon Missing
-"printer-state-reasons.marker-print-ribbon-missing" = "Print ribbon missing";
-// TRANSLATORS: Marker Supply Almost Empty
-"printer-state-reasons.marker-supply-almost-empty" = "Ink/toner almost empty";
-// TRANSLATORS: Ink/toner empty
-"printer-state-reasons.marker-supply-empty" = "Ink/toner empty";
-// TRANSLATORS: Ink/toner low
-"printer-state-reasons.marker-supply-low" = "Ink/toner low";
-// TRANSLATORS: Marker Supply Missing
-"printer-state-reasons.marker-supply-missing" = "Ink/toner missing";
-// TRANSLATORS: Marker Toner Cartridge Missing
-"printer-state-reasons.marker-toner-cartridge-missing" = "Toner cartridge missing";
-// TRANSLATORS: Marker Toner Missing
-"printer-state-reasons.marker-toner-missing" = "Toner missing";
-// TRANSLATORS: Ink/toner waste bin almost full
-"printer-state-reasons.marker-waste-almost-full" = "Ink/toner waste bin almost full";
-// TRANSLATORS: Ink/toner waste bin full
-"printer-state-reasons.marker-waste-full" = "Ink/toner waste bin full";
-// TRANSLATORS: Marker Waste Ink Receptacle Almost Full
-"printer-state-reasons.marker-waste-ink-receptacle-almost-full" = "Marker Waste Ink Receptacle Almost Full";
-// TRANSLATORS: Marker Waste Ink Receptacle Full
-"printer-state-reasons.marker-waste-ink-receptacle-full" = "Marker Waste Ink Receptacle Full";
-// TRANSLATORS: Marker Waste Ink Receptacle Missing
-"printer-state-reasons.marker-waste-ink-receptacle-missing" = "Marker Waste Ink Receptacle Missing";
-// TRANSLATORS: Marker Waste Missing
-"printer-state-reasons.marker-waste-missing" = "Ink/toner waste bin missing";
-// TRANSLATORS: Marker Waste Toner Receptacle Almost Full
-"printer-state-reasons.marker-waste-toner-receptacle-almost-full" = "Marker Waste Toner Receptacle Almost Full";
-// TRANSLATORS: Marker Waste Toner Receptacle Full
-"printer-state-reasons.marker-waste-toner-receptacle-full" = "Marker Waste Toner Receptacle Full";
-// TRANSLATORS: Marker Waste Toner Receptacle Missing
-"printer-state-reasons.marker-waste-toner-receptacle-missing" = "Marker Waste Toner Receptacle Missing";
-// TRANSLATORS: Material Empty
-"printer-state-reasons.material-empty" = "Material Empty";
-// TRANSLATORS: Material Low
-"printer-state-reasons.material-low" = "Material Low";
-// TRANSLATORS: Material Needed
-"printer-state-reasons.material-needed" = "Material Needed";
-// TRANSLATORS: Media Drying
-"printer-state-reasons.media-drying" = "Media Drying";
-// TRANSLATORS: Paper tray is empty
-"printer-state-reasons.media-empty" = "Media Empty";
-// TRANSLATORS: Paper jam
-"printer-state-reasons.media-jam" = "Media Jam";
-// TRANSLATORS: Paper tray is almost empty
-"printer-state-reasons.media-low" = "Paper tray is almost empty";
-// TRANSLATORS: Load paper
-"printer-state-reasons.media-needed" = "Load paper";
-// TRANSLATORS: Media Path Cannot Do 2-Sided Printing
-"printer-state-reasons.media-path-cannot-duplex-media-selected" = "Media Path Cannot Do 2-Sided Printing";
-// TRANSLATORS: Media Path Failure
-"printer-state-reasons.media-path-failure" = "Media Path Failure";
-// TRANSLATORS: Media Path Input Empty
-"printer-state-reasons.media-path-input-empty" = "Media Path Input Empty";
-// TRANSLATORS: Media Path Input Feed Error
-"printer-state-reasons.media-path-input-feed-error" = "Media Path Input Feed Error";
-// TRANSLATORS: Media Path Input Jam
-"printer-state-reasons.media-path-input-jam" = "Media Path Input Jam";
-// TRANSLATORS: Media Path Input Request
-"printer-state-reasons.media-path-input-request" = "Media Path Input Request";
-// TRANSLATORS: Media Path Jam
-"printer-state-reasons.media-path-jam" = "Media Path Jam";
-// TRANSLATORS: Media Path Media Tray Almost Full
-"printer-state-reasons.media-path-media-tray-almost-full" = "Media Path Media Tray Almost Full";
-// TRANSLATORS: Media Path Media Tray Full
-"printer-state-reasons.media-path-media-tray-full" = "Media Path Media Tray Full";
-// TRANSLATORS: Media Path Media Tray Missing
-"printer-state-reasons.media-path-media-tray-missing" = "Media Path Media Tray Missing";
-// TRANSLATORS: Media Path Output Feed Error
-"printer-state-reasons.media-path-output-feed-error" = "Media Path Output Feed Error";
-// TRANSLATORS: Media Path Output Full
-"printer-state-reasons.media-path-output-full" = "Media Path Output Full";
-// TRANSLATORS: Media Path Output Jam
-"printer-state-reasons.media-path-output-jam" = "Media Path Output Jam";
-// TRANSLATORS: Media Path Pick Roller Failure
-"printer-state-reasons.media-path-pick-roller-failure" = "Media Path Pick Roller Failure";
-// TRANSLATORS: Media Path Pick Roller Life Over
-"printer-state-reasons.media-path-pick-roller-life-over" = "Media Path Pick Roller Life Over";
-// TRANSLATORS: Media Path Pick Roller Life Warn
-"printer-state-reasons.media-path-pick-roller-life-warn" = "Media Path Pick Roller Life Warn";
-// TRANSLATORS: Media Path Pick Roller Missing
-"printer-state-reasons.media-path-pick-roller-missing" = "Media Path Pick Roller Missing";
-// TRANSLATORS: Motor Failure
-"printer-state-reasons.motor-failure" = "Motor Failure";
-// TRANSLATORS: Printer going offline
-"printer-state-reasons.moving-to-paused" = "Moving To Paused";
-// TRANSLATORS: None
-"printer-state-reasons.none" = "None";
-// TRANSLATORS: Optical Photoconductor Life Over
-"printer-state-reasons.opc-life-over" = "Optical Photoconductor Life Over";
-// TRANSLATORS: OPC almost at end-of-life
-"printer-state-reasons.opc-near-eol" = "Optical Photoconductor Near End-of-life";
-// TRANSLATORS: Check the printer for errors
-"printer-state-reasons.other" = "Other";
-// TRANSLATORS: Output bin is almost full
-"printer-state-reasons.output-area-almost-full" = "Output Area Almost Full";
-// TRANSLATORS: Output bin is full
-"printer-state-reasons.output-area-full" = "Output Area Full";
-// TRANSLATORS: Output Mailbox Select Failure
-"printer-state-reasons.output-mailbox-select-failure" = "Output Mailbox Select Failure";
-// TRANSLATORS: Output Media Tray Failure
-"printer-state-reasons.output-media-tray-failure" = "Output Media Tray Failure";
-// TRANSLATORS: Output Media Tray Feed Error
-"printer-state-reasons.output-media-tray-feed-error" = "Output Media Tray Feed Error";
-// TRANSLATORS: Output Media Tray Jam
-"printer-state-reasons.output-media-tray-jam" = "Output Media Tray Jam";
-// TRANSLATORS: Output tray is missing
-"printer-state-reasons.output-tray-missing" = "Output Tray Missing";
-// TRANSLATORS: Paused
-"printer-state-reasons.paused" = "Paused";
-// TRANSLATORS: Perforater Added
-"printer-state-reasons.perforater-added" = "Perforater Added";
-// TRANSLATORS: Perforater Almost Empty
-"printer-state-reasons.perforater-almost-empty" = "Perforater Almost Empty";
-// TRANSLATORS: Perforater Almost Full
-"printer-state-reasons.perforater-almost-full" = "Perforater Almost Full";
-// TRANSLATORS: Perforater At Limit
-"printer-state-reasons.perforater-at-limit" = "Perforater At Limit";
-// TRANSLATORS: Perforater Closed
-"printer-state-reasons.perforater-closed" = "Perforater Closed";
-// TRANSLATORS: Perforater Configuration Change
-"printer-state-reasons.perforater-configuration-change" = "Perforater Configuration Change";
-// TRANSLATORS: Perforater Cover Closed
-"printer-state-reasons.perforater-cover-closed" = "Perforater Cover Closed";
-// TRANSLATORS: Perforater Cover Open
-"printer-state-reasons.perforater-cover-open" = "Perforater Cover Open";
-// TRANSLATORS: Perforater Empty
-"printer-state-reasons.perforater-empty" = "Perforater Empty";
-// TRANSLATORS: Perforater Full
-"printer-state-reasons.perforater-full" = "Perforater Full";
-// TRANSLATORS: Perforater Interlock Closed
-"printer-state-reasons.perforater-interlock-closed" = "Perforater Interlock Closed";
-// TRANSLATORS: Perforater Interlock Open
-"printer-state-reasons.perforater-interlock-open" = "Perforater Interlock Open";
-// TRANSLATORS: Perforater Jam
-"printer-state-reasons.perforater-jam" = "Perforater Jam";
-// TRANSLATORS: Perforater Life Almost Over
-"printer-state-reasons.perforater-life-almost-over" = "Perforater Life Almost Over";
-// TRANSLATORS: Perforater Life Over
-"printer-state-reasons.perforater-life-over" = "Perforater Life Over";
-// TRANSLATORS: Perforater Memory Exhausted
-"printer-state-reasons.perforater-memory-exhausted" = "Perforater Memory Exhausted";
-// TRANSLATORS: Perforater Missing
-"printer-state-reasons.perforater-missing" = "Perforater Missing";
-// TRANSLATORS: Perforater Motor Failure
-"printer-state-reasons.perforater-motor-failure" = "Perforater Motor Failure";
-// TRANSLATORS: Perforater Near Limit
-"printer-state-reasons.perforater-near-limit" = "Perforater Near Limit";
-// TRANSLATORS: Perforater Offline
-"printer-state-reasons.perforater-offline" = "Perforater Offline";
-// TRANSLATORS: Perforater Opened
-"printer-state-reasons.perforater-opened" = "Perforater Opened";
-// TRANSLATORS: Perforater Over Temperature
-"printer-state-reasons.perforater-over-temperature" = "Perforater Over Temperature";
-// TRANSLATORS: Perforater Power Saver
-"printer-state-reasons.perforater-power-saver" = "Perforater Power Saver";
-// TRANSLATORS: Perforater Recoverable Failure
-"printer-state-reasons.perforater-recoverable-failure" = "Perforater Recoverable Failure";
-// TRANSLATORS: Perforater Recoverable Storage
-"printer-state-reasons.perforater-recoverable-storage" = "Perforater Recoverable Storage";
-// TRANSLATORS: Perforater Removed
-"printer-state-reasons.perforater-removed" = "Perforater Removed";
-// TRANSLATORS: Perforater Resource Added
-"printer-state-reasons.perforater-resource-added" = "Perforater Resource Added";
-// TRANSLATORS: Perforater Resource Removed
-"printer-state-reasons.perforater-resource-removed" = "Perforater Resource Removed";
-// TRANSLATORS: Perforater Thermistor Failure
-"printer-state-reasons.perforater-thermistor-failure" = "Perforater Thermistor Failure";
-// TRANSLATORS: Perforater Timing Failure
-"printer-state-reasons.perforater-timing-failure" = "Perforater Timing Failure";
-// TRANSLATORS: Perforater Turned Off
-"printer-state-reasons.perforater-turned-off" = "Perforater Turned Off";
-// TRANSLATORS: Perforater Turned On
-"printer-state-reasons.perforater-turned-on" = "Perforater Turned On";
-// TRANSLATORS: Perforater Under Temperature
-"printer-state-reasons.perforater-under-temperature" = "Perforater Under Temperature";
-// TRANSLATORS: Perforater Unrecoverable Failure
-"printer-state-reasons.perforater-unrecoverable-failure" = "Perforater Unrecoverable Failure";
-// TRANSLATORS: Perforater Unrecoverable Storage Error
-"printer-state-reasons.perforater-unrecoverable-storage-error" = "Perforater Unrecoverable Storage Error";
-// TRANSLATORS: Perforater Warming Up
-"printer-state-reasons.perforater-warming-up" = "Perforater Warming Up";
-// TRANSLATORS: Platform Cooling
-"printer-state-reasons.platform-cooling" = "Platform Cooling";
-// TRANSLATORS: Platform Failure
-"printer-state-reasons.platform-failure" = "Platform Failure";
-// TRANSLATORS: Platform Heating
-"printer-state-reasons.platform-heating" = "Platform Heating";
-// TRANSLATORS: Platform Temperature High
-"printer-state-reasons.platform-temperature-high" = "Platform Temperature High";
-// TRANSLATORS: Platform Temperature Low
-"printer-state-reasons.platform-temperature-low" = "Platform Temperature Low";
-// TRANSLATORS: Power Down
-"printer-state-reasons.power-down" = "Power Down";
-// TRANSLATORS: Power Up
-"printer-state-reasons.power-up" = "Power Up";
-// TRANSLATORS: Printer Reset Manually
-"printer-state-reasons.printer-manual-reset" = "Printer Reset Manually";
-// TRANSLATORS: Printer Reset Remotely
-"printer-state-reasons.printer-nms-reset" = "Printer Reset Remotely";
-// TRANSLATORS: Printer Ready To Print
-"printer-state-reasons.printer-ready-to-print" = "Printer Ready To Print";
-// TRANSLATORS: Puncher Added
-"printer-state-reasons.puncher-added" = "Puncher Added";
-// TRANSLATORS: Puncher Almost Empty
-"printer-state-reasons.puncher-almost-empty" = "Puncher Almost Empty";
-// TRANSLATORS: Puncher Almost Full
-"printer-state-reasons.puncher-almost-full" = "Puncher Almost Full";
-// TRANSLATORS: Puncher At Limit
-"printer-state-reasons.puncher-at-limit" = "Puncher At Limit";
-// TRANSLATORS: Puncher Closed
-"printer-state-reasons.puncher-closed" = "Puncher Closed";
-// TRANSLATORS: Puncher Configuration Change
-"printer-state-reasons.puncher-configuration-change" = "Puncher Configuration Change";
-// TRANSLATORS: Puncher Cover Closed
-"printer-state-reasons.puncher-cover-closed" = "Puncher Cover Closed";
-// TRANSLATORS: Puncher Cover Open
-"printer-state-reasons.puncher-cover-open" = "Puncher Cover Open";
-// TRANSLATORS: Puncher Empty
-"printer-state-reasons.puncher-empty" = "Puncher Empty";
-// TRANSLATORS: Puncher Full
-"printer-state-reasons.puncher-full" = "Puncher Full";
-// TRANSLATORS: Puncher Interlock Closed
-"printer-state-reasons.puncher-interlock-closed" = "Puncher Interlock Closed";
-// TRANSLATORS: Puncher Interlock Open
-"printer-state-reasons.puncher-interlock-open" = "Puncher Interlock Open";
-// TRANSLATORS: Puncher Jam
-"printer-state-reasons.puncher-jam" = "Puncher Jam";
-// TRANSLATORS: Puncher Life Almost Over
-"printer-state-reasons.puncher-life-almost-over" = "Puncher Life Almost Over";
-// TRANSLATORS: Puncher Life Over
-"printer-state-reasons.puncher-life-over" = "Puncher Life Over";
-// TRANSLATORS: Puncher Memory Exhausted
-"printer-state-reasons.puncher-memory-exhausted" = "Puncher Memory Exhausted";
-// TRANSLATORS: Puncher Missing
-"printer-state-reasons.puncher-missing" = "Puncher Missing";
-// TRANSLATORS: Puncher Motor Failure
-"printer-state-reasons.puncher-motor-failure" = "Puncher Motor Failure";
-// TRANSLATORS: Puncher Near Limit
-"printer-state-reasons.puncher-near-limit" = "Puncher Near Limit";
-// TRANSLATORS: Puncher Offline
-"printer-state-reasons.puncher-offline" = "Puncher Offline";
-// TRANSLATORS: Puncher Opened
-"printer-state-reasons.puncher-opened" = "Puncher Opened";
-// TRANSLATORS: Puncher Over Temperature
-"printer-state-reasons.puncher-over-temperature" = "Puncher Over Temperature";
-// TRANSLATORS: Puncher Power Saver
-"printer-state-reasons.puncher-power-saver" = "Puncher Power Saver";
-// TRANSLATORS: Puncher Recoverable Failure
-"printer-state-reasons.puncher-recoverable-failure" = "Puncher Recoverable Failure";
-// TRANSLATORS: Puncher Recoverable Storage
-"printer-state-reasons.puncher-recoverable-storage" = "Puncher Recoverable Storage";
-// TRANSLATORS: Puncher Removed
-"printer-state-reasons.puncher-removed" = "Puncher Removed";
-// TRANSLATORS: Puncher Resource Added
-"printer-state-reasons.puncher-resource-added" = "Puncher Resource Added";
-// TRANSLATORS: Puncher Resource Removed
-"printer-state-reasons.puncher-resource-removed" = "Puncher Resource Removed";
-// TRANSLATORS: Puncher Thermistor Failure
-"printer-state-reasons.puncher-thermistor-failure" = "Puncher Thermistor Failure";
-// TRANSLATORS: Puncher Timing Failure
-"printer-state-reasons.puncher-timing-failure" = "Puncher Timing Failure";
-// TRANSLATORS: Puncher Turned Off
-"printer-state-reasons.puncher-turned-off" = "Puncher Turned Off";
-// TRANSLATORS: Puncher Turned On
-"printer-state-reasons.puncher-turned-on" = "Puncher Turned On";
-// TRANSLATORS: Puncher Under Temperature
-"printer-state-reasons.puncher-under-temperature" = "Puncher Under Temperature";
-// TRANSLATORS: Puncher Unrecoverable Failure
-"printer-state-reasons.puncher-unrecoverable-failure" = "Puncher Unrecoverable Failure";
-// TRANSLATORS: Puncher Unrecoverable Storage Error
-"printer-state-reasons.puncher-unrecoverable-storage-error" = "Puncher Unrecoverable Storage Error";
-// TRANSLATORS: Puncher Warming Up
-"printer-state-reasons.puncher-warming-up" = "Puncher Warming Up";
-// TRANSLATORS: Separation Cutter Added
-"printer-state-reasons.separation-cutter-added" = "Separation Cutter Added";
-// TRANSLATORS: Separation Cutter Almost Empty
-"printer-state-reasons.separation-cutter-almost-empty" = "Separation Cutter Almost Empty";
-// TRANSLATORS: Separation Cutter Almost Full
-"printer-state-reasons.separation-cutter-almost-full" = "Separation Cutter Almost Full";
-// TRANSLATORS: Separation Cutter At Limit
-"printer-state-reasons.separation-cutter-at-limit" = "Separation Cutter At Limit";
-// TRANSLATORS: Separation Cutter Closed
-"printer-state-reasons.separation-cutter-closed" = "Separation Cutter Closed";
-// TRANSLATORS: Separation Cutter Configuration Change
-"printer-state-reasons.separation-cutter-configuration-change" = "Separation Cutter Configuration Change";
-// TRANSLATORS: Separation Cutter Cover Closed
-"printer-state-reasons.separation-cutter-cover-closed" = "Separation Cutter Cover Closed";
-// TRANSLATORS: Separation Cutter Cover Open
-"printer-state-reasons.separation-cutter-cover-open" = "Separation Cutter Cover Open";
-// TRANSLATORS: Separation Cutter Empty
-"printer-state-reasons.separation-cutter-empty" = "Separation Cutter Empty";
-// TRANSLATORS: Separation Cutter Full
-"printer-state-reasons.separation-cutter-full" = "Separation Cutter Full";
-// TRANSLATORS: Separation Cutter Interlock Closed
-"printer-state-reasons.separation-cutter-interlock-closed" = "Separation Cutter Interlock Closed";
-// TRANSLATORS: Separation Cutter Interlock Open
-"printer-state-reasons.separation-cutter-interlock-open" = "Separation Cutter Interlock Open";
-// TRANSLATORS: Separation Cutter Jam
-"printer-state-reasons.separation-cutter-jam" = "Separation Cutter Jam";
-// TRANSLATORS: Separation Cutter Life Almost Over
-"printer-state-reasons.separation-cutter-life-almost-over" = "Separation Cutter Life Almost Over";
-// TRANSLATORS: Separation Cutter Life Over
-"printer-state-reasons.separation-cutter-life-over" = "Separation Cutter Life Over";
-// TRANSLATORS: Separation Cutter Memory Exhausted
-"printer-state-reasons.separation-cutter-memory-exhausted" = "Separation Cutter Memory Exhausted";
-// TRANSLATORS: Separation Cutter Missing
-"printer-state-reasons.separation-cutter-missing" = "Separation Cutter Missing";
-// TRANSLATORS: Separation Cutter Motor Failure
-"printer-state-reasons.separation-cutter-motor-failure" = "Separation Cutter Motor Failure";
-// TRANSLATORS: Separation Cutter Near Limit
-"printer-state-reasons.separation-cutter-near-limit" = "Separation Cutter Near Limit";
-// TRANSLATORS: Separation Cutter Offline
-"printer-state-reasons.separation-cutter-offline" = "Separation Cutter Offline";
-// TRANSLATORS: Separation Cutter Opened
-"printer-state-reasons.separation-cutter-opened" = "Separation Cutter Opened";
-// TRANSLATORS: Separation Cutter Over Temperature
-"printer-state-reasons.separation-cutter-over-temperature" = "Separation Cutter Over Temperature";
-// TRANSLATORS: Separation Cutter Power Saver
-"printer-state-reasons.separation-cutter-power-saver" = "Separation Cutter Power Saver";
-// TRANSLATORS: Separation Cutter Recoverable Failure
-"printer-state-reasons.separation-cutter-recoverable-failure" = "Separation Cutter Recoverable Failure";
-// TRANSLATORS: Separation Cutter Recoverable Storage
-"printer-state-reasons.separation-cutter-recoverable-storage" = "Separation Cutter Recoverable Storage";
-// TRANSLATORS: Separation Cutter Removed
-"printer-state-reasons.separation-cutter-removed" = "Separation Cutter Removed";
-// TRANSLATORS: Separation Cutter Resource Added
-"printer-state-reasons.separation-cutter-resource-added" = "Separation Cutter Resource Added";
-// TRANSLATORS: Separation Cutter Resource Removed
-"printer-state-reasons.separation-cutter-resource-removed" = "Separation Cutter Resource Removed";
-// TRANSLATORS: Separation Cutter Thermistor Failure
-"printer-state-reasons.separation-cutter-thermistor-failure" = "Separation Cutter Thermistor Failure";
-// TRANSLATORS: Separation Cutter Timing Failure
-"printer-state-reasons.separation-cutter-timing-failure" = "Separation Cutter Timing Failure";
-// TRANSLATORS: Separation Cutter Turned Off
-"printer-state-reasons.separation-cutter-turned-off" = "Separation Cutter Turned Off";
-// TRANSLATORS: Separation Cutter Turned On
-"printer-state-reasons.separation-cutter-turned-on" = "Separation Cutter Turned On";
-// TRANSLATORS: Separation Cutter Under Temperature
-"printer-state-reasons.separation-cutter-under-temperature" = "Separation Cutter Under Temperature";
-// TRANSLATORS: Separation Cutter Unrecoverable Failure
-"printer-state-reasons.separation-cutter-unrecoverable-failure" = "Separation Cutter Unrecoverable Failure";
-// TRANSLATORS: Separation Cutter Unrecoverable Storage Error
-"printer-state-reasons.separation-cutter-unrecoverable-storage-error" = "Separation Cutter Unrecoverable Storage Error";
-// TRANSLATORS: Separation Cutter Warming Up
-"printer-state-reasons.separation-cutter-warming-up" = "Separation Cutter Warming Up";
-// TRANSLATORS: Sheet Rotator Added
-"printer-state-reasons.sheet-rotator-added" = "Sheet Rotator Added";
-// TRANSLATORS: Sheet Rotator Almost Empty
-"printer-state-reasons.sheet-rotator-almost-empty" = "Sheet Rotator Almost Empty";
-// TRANSLATORS: Sheet Rotator Almost Full
-"printer-state-reasons.sheet-rotator-almost-full" = "Sheet Rotator Almost Full";
-// TRANSLATORS: Sheet Rotator At Limit
-"printer-state-reasons.sheet-rotator-at-limit" = "Sheet Rotator At Limit";
-// TRANSLATORS: Sheet Rotator Closed
-"printer-state-reasons.sheet-rotator-closed" = "Sheet Rotator Closed";
-// TRANSLATORS: Sheet Rotator Configuration Change
-"printer-state-reasons.sheet-rotator-configuration-change" = "Sheet Rotator Configuration Change";
-// TRANSLATORS: Sheet Rotator Cover Closed
-"printer-state-reasons.sheet-rotator-cover-closed" = "Sheet Rotator Cover Closed";
-// TRANSLATORS: Sheet Rotator Cover Open
-"printer-state-reasons.sheet-rotator-cover-open" = "Sheet Rotator Cover Open";
-// TRANSLATORS: Sheet Rotator Empty
-"printer-state-reasons.sheet-rotator-empty" = "Sheet Rotator Empty";
-// TRANSLATORS: Sheet Rotator Full
-"printer-state-reasons.sheet-rotator-full" = "Sheet Rotator Full";
-// TRANSLATORS: Sheet Rotator Interlock Closed
-"printer-state-reasons.sheet-rotator-interlock-closed" = "Sheet Rotator Interlock Closed";
-// TRANSLATORS: Sheet Rotator Interlock Open
-"printer-state-reasons.sheet-rotator-interlock-open" = "Sheet Rotator Interlock Open";
-// TRANSLATORS: Sheet Rotator Jam
-"printer-state-reasons.sheet-rotator-jam" = "Sheet Rotator Jam";
-// TRANSLATORS: Sheet Rotator Life Almost Over
-"printer-state-reasons.sheet-rotator-life-almost-over" = "Sheet Rotator Life Almost Over";
-// TRANSLATORS: Sheet Rotator Life Over
-"printer-state-reasons.sheet-rotator-life-over" = "Sheet Rotator Life Over";
-// TRANSLATORS: Sheet Rotator Memory Exhausted
-"printer-state-reasons.sheet-rotator-memory-exhausted" = "Sheet Rotator Memory Exhausted";
-// TRANSLATORS: Sheet Rotator Missing
-"printer-state-reasons.sheet-rotator-missing" = "Sheet Rotator Missing";
-// TRANSLATORS: Sheet Rotator Motor Failure
-"printer-state-reasons.sheet-rotator-motor-failure" = "Sheet Rotator Motor Failure";
-// TRANSLATORS: Sheet Rotator Near Limit
-"printer-state-reasons.sheet-rotator-near-limit" = "Sheet Rotator Near Limit";
-// TRANSLATORS: Sheet Rotator Offline
-"printer-state-reasons.sheet-rotator-offline" = "Sheet Rotator Offline";
-// TRANSLATORS: Sheet Rotator Opened
-"printer-state-reasons.sheet-rotator-opened" = "Sheet Rotator Opened";
-// TRANSLATORS: Sheet Rotator Over Temperature
-"printer-state-reasons.sheet-rotator-over-temperature" = "Sheet Rotator Over Temperature";
-// TRANSLATORS: Sheet Rotator Power Saver
-"printer-state-reasons.sheet-rotator-power-saver" = "Sheet Rotator Power Saver";
-// TRANSLATORS: Sheet Rotator Recoverable Failure
-"printer-state-reasons.sheet-rotator-recoverable-failure" = "Sheet Rotator Recoverable Failure";
-// TRANSLATORS: Sheet Rotator Recoverable Storage
-"printer-state-reasons.sheet-rotator-recoverable-storage" = "Sheet Rotator Recoverable Storage";
-// TRANSLATORS: Sheet Rotator Removed
-"printer-state-reasons.sheet-rotator-removed" = "Sheet Rotator Removed";
-// TRANSLATORS: Sheet Rotator Resource Added
-"printer-state-reasons.sheet-rotator-resource-added" = "Sheet Rotator Resource Added";
-// TRANSLATORS: Sheet Rotator Resource Removed
-"printer-state-reasons.sheet-rotator-resource-removed" = "Sheet Rotator Resource Removed";
-// TRANSLATORS: Sheet Rotator Thermistor Failure
-"printer-state-reasons.sheet-rotator-thermistor-failure" = "Sheet Rotator Thermistor Failure";
-// TRANSLATORS: Sheet Rotator Timing Failure
-"printer-state-reasons.sheet-rotator-timing-failure" = "Sheet Rotator Timing Failure";
-// TRANSLATORS: Sheet Rotator Turned Off
-"printer-state-reasons.sheet-rotator-turned-off" = "Sheet Rotator Turned Off";
-// TRANSLATORS: Sheet Rotator Turned On
-"printer-state-reasons.sheet-rotator-turned-on" = "Sheet Rotator Turned On";
-// TRANSLATORS: Sheet Rotator Under Temperature
-"printer-state-reasons.sheet-rotator-under-temperature" = "Sheet Rotator Under Temperature";
-// TRANSLATORS: Sheet Rotator Unrecoverable Failure
-"printer-state-reasons.sheet-rotator-unrecoverable-failure" = "Sheet Rotator Unrecoverable Failure";
-// TRANSLATORS: Sheet Rotator Unrecoverable Storage Error
-"printer-state-reasons.sheet-rotator-unrecoverable-storage-error" = "Sheet Rotator Unrecoverable Storage Error";
-// TRANSLATORS: Sheet Rotator Warming Up
-"printer-state-reasons.sheet-rotator-warming-up" = "Sheet Rotator Warming Up";
-// TRANSLATORS: Printer offline
-"printer-state-reasons.shutdown" = "Shutdown";
-// TRANSLATORS: Slitter Added
-"printer-state-reasons.slitter-added" = "Slitter Added";
-// TRANSLATORS: Slitter Almost Empty
-"printer-state-reasons.slitter-almost-empty" = "Slitter Almost Empty";
-// TRANSLATORS: Slitter Almost Full
-"printer-state-reasons.slitter-almost-full" = "Slitter Almost Full";
-// TRANSLATORS: Slitter At Limit
-"printer-state-reasons.slitter-at-limit" = "Slitter At Limit";
-// TRANSLATORS: Slitter Closed
-"printer-state-reasons.slitter-closed" = "Slitter Closed";
-// TRANSLATORS: Slitter Configuration Change
-"printer-state-reasons.slitter-configuration-change" = "Slitter Configuration Change";
-// TRANSLATORS: Slitter Cover Closed
-"printer-state-reasons.slitter-cover-closed" = "Slitter Cover Closed";
-// TRANSLATORS: Slitter Cover Open
-"printer-state-reasons.slitter-cover-open" = "Slitter Cover Open";
-// TRANSLATORS: Slitter Empty
-"printer-state-reasons.slitter-empty" = "Slitter Empty";
-// TRANSLATORS: Slitter Full
-"printer-state-reasons.slitter-full" = "Slitter Full";
-// TRANSLATORS: Slitter Interlock Closed
-"printer-state-reasons.slitter-interlock-closed" = "Slitter Interlock Closed";
-// TRANSLATORS: Slitter Interlock Open
-"printer-state-reasons.slitter-interlock-open" = "Slitter Interlock Open";
-// TRANSLATORS: Slitter Jam
-"printer-state-reasons.slitter-jam" = "Slitter Jam";
-// TRANSLATORS: Slitter Life Almost Over
-"printer-state-reasons.slitter-life-almost-over" = "Slitter Life Almost Over";
-// TRANSLATORS: Slitter Life Over
-"printer-state-reasons.slitter-life-over" = "Slitter Life Over";
-// TRANSLATORS: Slitter Memory Exhausted
-"printer-state-reasons.slitter-memory-exhausted" = "Slitter Memory Exhausted";
-// TRANSLATORS: Slitter Missing
-"printer-state-reasons.slitter-missing" = "Slitter Missing";
-// TRANSLATORS: Slitter Motor Failure
-"printer-state-reasons.slitter-motor-failure" = "Slitter Motor Failure";
-// TRANSLATORS: Slitter Near Limit
-"printer-state-reasons.slitter-near-limit" = "Slitter Near Limit";
-// TRANSLATORS: Slitter Offline
-"printer-state-reasons.slitter-offline" = "Slitter Offline";
-// TRANSLATORS: Slitter Opened
-"printer-state-reasons.slitter-opened" = "Slitter Opened";
-// TRANSLATORS: Slitter Over Temperature
-"printer-state-reasons.slitter-over-temperature" = "Slitter Over Temperature";
-// TRANSLATORS: Slitter Power Saver
-"printer-state-reasons.slitter-power-saver" = "Slitter Power Saver";
-// TRANSLATORS: Slitter Recoverable Failure
-"printer-state-reasons.slitter-recoverable-failure" = "Slitter Recoverable Failure";
-// TRANSLATORS: Slitter Recoverable Storage
-"printer-state-reasons.slitter-recoverable-storage" = "Slitter Recoverable Storage";
-// TRANSLATORS: Slitter Removed
-"printer-state-reasons.slitter-removed" = "Slitter Removed";
-// TRANSLATORS: Slitter Resource Added
-"printer-state-reasons.slitter-resource-added" = "Slitter Resource Added";
-// TRANSLATORS: Slitter Resource Removed
-"printer-state-reasons.slitter-resource-removed" = "Slitter Resource Removed";
-// TRANSLATORS: Slitter Thermistor Failure
-"printer-state-reasons.slitter-thermistor-failure" = "Slitter Thermistor Failure";
-// TRANSLATORS: Slitter Timing Failure
-"printer-state-reasons.slitter-timing-failure" = "Slitter Timing Failure";
-// TRANSLATORS: Slitter Turned Off
-"printer-state-reasons.slitter-turned-off" = "Slitter Turned Off";
-// TRANSLATORS: Slitter Turned On
-"printer-state-reasons.slitter-turned-on" = "Slitter Turned On";
-// TRANSLATORS: Slitter Under Temperature
-"printer-state-reasons.slitter-under-temperature" = "Slitter Under Temperature";
-// TRANSLATORS: Slitter Unrecoverable Failure
-"printer-state-reasons.slitter-unrecoverable-failure" = "Slitter Unrecoverable Failure";
-// TRANSLATORS: Slitter Unrecoverable Storage Error
-"printer-state-reasons.slitter-unrecoverable-storage-error" = "Slitter Unrecoverable Storage Error";
-// TRANSLATORS: Slitter Warming Up
-"printer-state-reasons.slitter-warming-up" = "Slitter Warming Up";
-// TRANSLATORS: Spool Area Full
-"printer-state-reasons.spool-area-full" = "Spool Area Full";
-// TRANSLATORS: Stacker Added
-"printer-state-reasons.stacker-added" = "Stacker Added";
-// TRANSLATORS: Stacker Almost Empty
-"printer-state-reasons.stacker-almost-empty" = "Stacker Almost Empty";
-// TRANSLATORS: Stacker Almost Full
-"printer-state-reasons.stacker-almost-full" = "Stacker Almost Full";
-// TRANSLATORS: Stacker At Limit
-"printer-state-reasons.stacker-at-limit" = "Stacker At Limit";
-// TRANSLATORS: Stacker Closed
-"printer-state-reasons.stacker-closed" = "Stacker Closed";
-// TRANSLATORS: Stacker Configuration Change
-"printer-state-reasons.stacker-configuration-change" = "Stacker Configuration Change";
-// TRANSLATORS: Stacker Cover Closed
-"printer-state-reasons.stacker-cover-closed" = "Stacker Cover Closed";
-// TRANSLATORS: Stacker Cover Open
-"printer-state-reasons.stacker-cover-open" = "Stacker Cover Open";
-// TRANSLATORS: Stacker Empty
-"printer-state-reasons.stacker-empty" = "Stacker Empty";
-// TRANSLATORS: Stacker Full
-"printer-state-reasons.stacker-full" = "Stacker Full";
-// TRANSLATORS: Stacker Interlock Closed
-"printer-state-reasons.stacker-interlock-closed" = "Stacker Interlock Closed";
-// TRANSLATORS: Stacker Interlock Open
-"printer-state-reasons.stacker-interlock-open" = "Stacker Interlock Open";
-// TRANSLATORS: Stacker Jam
-"printer-state-reasons.stacker-jam" = "Stacker Jam";
-// TRANSLATORS: Stacker Life Almost Over
-"printer-state-reasons.stacker-life-almost-over" = "Stacker Life Almost Over";
-// TRANSLATORS: Stacker Life Over
-"printer-state-reasons.stacker-life-over" = "Stacker Life Over";
-// TRANSLATORS: Stacker Memory Exhausted
-"printer-state-reasons.stacker-memory-exhausted" = "Stacker Memory Exhausted";
-// TRANSLATORS: Stacker Missing
-"printer-state-reasons.stacker-missing" = "Stacker Missing";
-// TRANSLATORS: Stacker Motor Failure
-"printer-state-reasons.stacker-motor-failure" = "Stacker Motor Failure";
-// TRANSLATORS: Stacker Near Limit
-"printer-state-reasons.stacker-near-limit" = "Stacker Near Limit";
-// TRANSLATORS: Stacker Offline
-"printer-state-reasons.stacker-offline" = "Stacker Offline";
-// TRANSLATORS: Stacker Opened
-"printer-state-reasons.stacker-opened" = "Stacker Opened";
-// TRANSLATORS: Stacker Over Temperature
-"printer-state-reasons.stacker-over-temperature" = "Stacker Over Temperature";
-// TRANSLATORS: Stacker Power Saver
-"printer-state-reasons.stacker-power-saver" = "Stacker Power Saver";
-// TRANSLATORS: Stacker Recoverable Failure
-"printer-state-reasons.stacker-recoverable-failure" = "Stacker Recoverable Failure";
-// TRANSLATORS: Stacker Recoverable Storage
-"printer-state-reasons.stacker-recoverable-storage" = "Stacker Recoverable Storage";
-// TRANSLATORS: Stacker Removed
-"printer-state-reasons.stacker-removed" = "Stacker Removed";
-// TRANSLATORS: Stacker Resource Added
-"printer-state-reasons.stacker-resource-added" = "Stacker Resource Added";
-// TRANSLATORS: Stacker Resource Removed
-"printer-state-reasons.stacker-resource-removed" = "Stacker Resource Removed";
-// TRANSLATORS: Stacker Thermistor Failure
-"printer-state-reasons.stacker-thermistor-failure" = "Stacker Thermistor Failure";
-// TRANSLATORS: Stacker Timing Failure
-"printer-state-reasons.stacker-timing-failure" = "Stacker Timing Failure";
-// TRANSLATORS: Stacker Turned Off
-"printer-state-reasons.stacker-turned-off" = "Stacker Turned Off";
-// TRANSLATORS: Stacker Turned On
-"printer-state-reasons.stacker-turned-on" = "Stacker Turned On";
-// TRANSLATORS: Stacker Under Temperature
-"printer-state-reasons.stacker-under-temperature" = "Stacker Under Temperature";
-// TRANSLATORS: Stacker Unrecoverable Failure
-"printer-state-reasons.stacker-unrecoverable-failure" = "Stacker Unrecoverable Failure";
-// TRANSLATORS: Stacker Unrecoverable Storage Error
-"printer-state-reasons.stacker-unrecoverable-storage-error" = "Stacker Unrecoverable Storage Error";
-// TRANSLATORS: Stacker Warming Up
-"printer-state-reasons.stacker-warming-up" = "Stacker Warming Up";
-// TRANSLATORS: Stapler Added
-"printer-state-reasons.stapler-added" = "Stapler Added";
-// TRANSLATORS: Stapler Almost Empty
-"printer-state-reasons.stapler-almost-empty" = "Stapler Almost Empty";
-// TRANSLATORS: Stapler Almost Full
-"printer-state-reasons.stapler-almost-full" = "Stapler Almost Full";
-// TRANSLATORS: Stapler At Limit
-"printer-state-reasons.stapler-at-limit" = "Stapler At Limit";
-// TRANSLATORS: Stapler Closed
-"printer-state-reasons.stapler-closed" = "Stapler Closed";
-// TRANSLATORS: Stapler Configuration Change
-"printer-state-reasons.stapler-configuration-change" = "Stapler Configuration Change";
-// TRANSLATORS: Stapler Cover Closed
-"printer-state-reasons.stapler-cover-closed" = "Stapler Cover Closed";
-// TRANSLATORS: Stapler Cover Open
-"printer-state-reasons.stapler-cover-open" = "Stapler Cover Open";
-// TRANSLATORS: Stapler Empty
-"printer-state-reasons.stapler-empty" = "Stapler Empty";
-// TRANSLATORS: Stapler Full
-"printer-state-reasons.stapler-full" = "Stapler Full";
-// TRANSLATORS: Stapler Interlock Closed
-"printer-state-reasons.stapler-interlock-closed" = "Stapler Interlock Closed";
-// TRANSLATORS: Stapler Interlock Open
-"printer-state-reasons.stapler-interlock-open" = "Stapler Interlock Open";
-// TRANSLATORS: Stapler Jam
-"printer-state-reasons.stapler-jam" = "Stapler Jam";
-// TRANSLATORS: Stapler Life Almost Over
-"printer-state-reasons.stapler-life-almost-over" = "Stapler Life Almost Over";
-// TRANSLATORS: Stapler Life Over
-"printer-state-reasons.stapler-life-over" = "Stapler Life Over";
-// TRANSLATORS: Stapler Memory Exhausted
-"printer-state-reasons.stapler-memory-exhausted" = "Stapler Memory Exhausted";
-// TRANSLATORS: Stapler Missing
-"printer-state-reasons.stapler-missing" = "Stapler Missing";
-// TRANSLATORS: Stapler Motor Failure
-"printer-state-reasons.stapler-motor-failure" = "Stapler Motor Failure";
-// TRANSLATORS: Stapler Near Limit
-"printer-state-reasons.stapler-near-limit" = "Stapler Near Limit";
-// TRANSLATORS: Stapler Offline
-"printer-state-reasons.stapler-offline" = "Stapler Offline";
-// TRANSLATORS: Stapler Opened
-"printer-state-reasons.stapler-opened" = "Stapler Opened";
-// TRANSLATORS: Stapler Over Temperature
-"printer-state-reasons.stapler-over-temperature" = "Stapler Over Temperature";
-// TRANSLATORS: Stapler Power Saver
-"printer-state-reasons.stapler-power-saver" = "Stapler Power Saver";
-// TRANSLATORS: Stapler Recoverable Failure
-"printer-state-reasons.stapler-recoverable-failure" = "Stapler Recoverable Failure";
-// TRANSLATORS: Stapler Recoverable Storage
-"printer-state-reasons.stapler-recoverable-storage" = "Stapler Recoverable Storage";
-// TRANSLATORS: Stapler Removed
-"printer-state-reasons.stapler-removed" = "Stapler Removed";
-// TRANSLATORS: Stapler Resource Added
-"printer-state-reasons.stapler-resource-added" = "Stapler Resource Added";
-// TRANSLATORS: Stapler Resource Removed
-"printer-state-reasons.stapler-resource-removed" = "Stapler Resource Removed";
-// TRANSLATORS: Stapler Thermistor Failure
-"printer-state-reasons.stapler-thermistor-failure" = "Stapler Thermistor Failure";
-// TRANSLATORS: Stapler Timing Failure
-"printer-state-reasons.stapler-timing-failure" = "Stapler Timing Failure";
-// TRANSLATORS: Stapler Turned Off
-"printer-state-reasons.stapler-turned-off" = "Stapler Turned Off";
-// TRANSLATORS: Stapler Turned On
-"printer-state-reasons.stapler-turned-on" = "Stapler Turned On";
-// TRANSLATORS: Stapler Under Temperature
-"printer-state-reasons.stapler-under-temperature" = "Stapler Under Temperature";
-// TRANSLATORS: Stapler Unrecoverable Failure
-"printer-state-reasons.stapler-unrecoverable-failure" = "Stapler Unrecoverable Failure";
-// TRANSLATORS: Stapler Unrecoverable Storage Error
-"printer-state-reasons.stapler-unrecoverable-storage-error" = "Stapler Unrecoverable Storage Error";
-// TRANSLATORS: Stapler Warming Up
-"printer-state-reasons.stapler-warming-up" = "Stapler Warming Up";
-// TRANSLATORS: Stitcher Added
-"printer-state-reasons.stitcher-added" = "Stitcher Added";
-// TRANSLATORS: Stitcher Almost Empty
-"printer-state-reasons.stitcher-almost-empty" = "Stitcher Almost Empty";
-// TRANSLATORS: Stitcher Almost Full
-"printer-state-reasons.stitcher-almost-full" = "Stitcher Almost Full";
-// TRANSLATORS: Stitcher At Limit
-"printer-state-reasons.stitcher-at-limit" = "Stitcher At Limit";
-// TRANSLATORS: Stitcher Closed
-"printer-state-reasons.stitcher-closed" = "Stitcher Closed";
-// TRANSLATORS: Stitcher Configuration Change
-"printer-state-reasons.stitcher-configuration-change" = "Stitcher Configuration Change";
-// TRANSLATORS: Stitcher Cover Closed
-"printer-state-reasons.stitcher-cover-closed" = "Stitcher Cover Closed";
-// TRANSLATORS: Stitcher Cover Open
-"printer-state-reasons.stitcher-cover-open" = "Stitcher Cover Open";
-// TRANSLATORS: Stitcher Empty
-"printer-state-reasons.stitcher-empty" = "Stitcher Empty";
-// TRANSLATORS: Stitcher Full
-"printer-state-reasons.stitcher-full" = "Stitcher Full";
-// TRANSLATORS: Stitcher Interlock Closed
-"printer-state-reasons.stitcher-interlock-closed" = "Stitcher Interlock Closed";
-// TRANSLATORS: Stitcher Interlock Open
-"printer-state-reasons.stitcher-interlock-open" = "Stitcher Interlock Open";
-// TRANSLATORS: Stitcher Jam
-"printer-state-reasons.stitcher-jam" = "Stitcher Jam";
-// TRANSLATORS: Stitcher Life Almost Over
-"printer-state-reasons.stitcher-life-almost-over" = "Stitcher Life Almost Over";
-// TRANSLATORS: Stitcher Life Over
-"printer-state-reasons.stitcher-life-over" = "Stitcher Life Over";
-// TRANSLATORS: Stitcher Memory Exhausted
-"printer-state-reasons.stitcher-memory-exhausted" = "Stitcher Memory Exhausted";
-// TRANSLATORS: Stitcher Missing
-"printer-state-reasons.stitcher-missing" = "Stitcher Missing";
-// TRANSLATORS: Stitcher Motor Failure
-"printer-state-reasons.stitcher-motor-failure" = "Stitcher Motor Failure";
-// TRANSLATORS: Stitcher Near Limit
-"printer-state-reasons.stitcher-near-limit" = "Stitcher Near Limit";
-// TRANSLATORS: Stitcher Offline
-"printer-state-reasons.stitcher-offline" = "Stitcher Offline";
-// TRANSLATORS: Stitcher Opened
-"printer-state-reasons.stitcher-opened" = "Stitcher Opened";
-// TRANSLATORS: Stitcher Over Temperature
-"printer-state-reasons.stitcher-over-temperature" = "Stitcher Over Temperature";
-// TRANSLATORS: Stitcher Power Saver
-"printer-state-reasons.stitcher-power-saver" = "Stitcher Power Saver";
-// TRANSLATORS: Stitcher Recoverable Failure
-"printer-state-reasons.stitcher-recoverable-failure" = "Stitcher Recoverable Failure";
-// TRANSLATORS: Stitcher Recoverable Storage
-"printer-state-reasons.stitcher-recoverable-storage" = "Stitcher Recoverable Storage";
-// TRANSLATORS: Stitcher Removed
-"printer-state-reasons.stitcher-removed" = "Stitcher Removed";
-// TRANSLATORS: Stitcher Resource Added
-"printer-state-reasons.stitcher-resource-added" = "Stitcher Resource Added";
-// TRANSLATORS: Stitcher Resource Removed
-"printer-state-reasons.stitcher-resource-removed" = "Stitcher Resource Removed";
-// TRANSLATORS: Stitcher Thermistor Failure
-"printer-state-reasons.stitcher-thermistor-failure" = "Stitcher Thermistor Failure";
-// TRANSLATORS: Stitcher Timing Failure
-"printer-state-reasons.stitcher-timing-failure" = "Stitcher Timing Failure";
-// TRANSLATORS: Stitcher Turned Off
-"printer-state-reasons.stitcher-turned-off" = "Stitcher Turned Off";
-// TRANSLATORS: Stitcher Turned On
-"printer-state-reasons.stitcher-turned-on" = "Stitcher Turned On";
-// TRANSLATORS: Stitcher Under Temperature
-"printer-state-reasons.stitcher-under-temperature" = "Stitcher Under Temperature";
-// TRANSLATORS: Stitcher Unrecoverable Failure
-"printer-state-reasons.stitcher-unrecoverable-failure" = "Stitcher Unrecoverable Failure";
-// TRANSLATORS: Stitcher Unrecoverable Storage Error
-"printer-state-reasons.stitcher-unrecoverable-storage-error" = "Stitcher Unrecoverable Storage Error";
-// TRANSLATORS: Stitcher Warming Up
-"printer-state-reasons.stitcher-warming-up" = "Stitcher Warming Up";
-// TRANSLATORS: Partially stopped
-"printer-state-reasons.stopped-partly" = "Stopped Partly";
-// TRANSLATORS: Stopping
-"printer-state-reasons.stopping" = "Stopping";
-// TRANSLATORS: Subunit Added
-"printer-state-reasons.subunit-added" = "Subunit Added";
-// TRANSLATORS: Subunit Almost Empty
-"printer-state-reasons.subunit-almost-empty" = "Subunit Almost Empty";
-// TRANSLATORS: Subunit Almost Full
-"printer-state-reasons.subunit-almost-full" = "Subunit Almost Full";
-// TRANSLATORS: Subunit At Limit
-"printer-state-reasons.subunit-at-limit" = "Subunit At Limit";
-// TRANSLATORS: Subunit Closed
-"printer-state-reasons.subunit-closed" = "Subunit Closed";
-// TRANSLATORS: Subunit Cooling Down
-"printer-state-reasons.subunit-cooling-down" = "Subunit Cooling Down";
-// TRANSLATORS: Subunit Empty
-"printer-state-reasons.subunit-empty" = "Subunit Empty";
-// TRANSLATORS: Subunit Full
-"printer-state-reasons.subunit-full" = "Subunit Full";
-// TRANSLATORS: Subunit Life Almost Over
-"printer-state-reasons.subunit-life-almost-over" = "Subunit Life Almost Over";
-// TRANSLATORS: Subunit Life Over
-"printer-state-reasons.subunit-life-over" = "Subunit Life Over";
-// TRANSLATORS: Subunit Memory Exhausted
-"printer-state-reasons.subunit-memory-exhausted" = "Subunit Memory Exhausted";
-// TRANSLATORS: Subunit Missing
-"printer-state-reasons.subunit-missing" = "Subunit Missing";
-// TRANSLATORS: Subunit Motor Failure
-"printer-state-reasons.subunit-motor-failure" = "Subunit Motor Failure";
-// TRANSLATORS: Subunit Near Limit
-"printer-state-reasons.subunit-near-limit" = "Subunit Near Limit";
-// TRANSLATORS: Subunit Offline
-"printer-state-reasons.subunit-offline" = "Subunit Offline";
-// TRANSLATORS: Subunit Opened
-"printer-state-reasons.subunit-opened" = "Subunit Opened";
-// TRANSLATORS: Subunit Over Temperature
-"printer-state-reasons.subunit-over-temperature" = "Subunit Over Temperature";
-// TRANSLATORS: Subunit Power Saver
-"printer-state-reasons.subunit-power-saver" = "Subunit Power Saver";
-// TRANSLATORS: Subunit Recoverable Failure
-"printer-state-reasons.subunit-recoverable-failure" = "Subunit Recoverable Failure";
-// TRANSLATORS: Subunit Recoverable Storage
-"printer-state-reasons.subunit-recoverable-storage" = "Subunit Recoverable Storage";
-// TRANSLATORS: Subunit Removed
-"printer-state-reasons.subunit-removed" = "Subunit Removed";
-// TRANSLATORS: Subunit Resource Added
-"printer-state-reasons.subunit-resource-added" = "Subunit Resource Added";
-// TRANSLATORS: Subunit Resource Removed
-"printer-state-reasons.subunit-resource-removed" = "Subunit Resource Removed";
-// TRANSLATORS: Subunit Thermistor Failure
-"printer-state-reasons.subunit-thermistor-failure" = "Subunit Thermistor Failure";
-// TRANSLATORS: Subunit Timing Failure
-"printer-state-reasons.subunit-timing-Failure" = "Subunit Timing Failure";
-// TRANSLATORS: Subunit Turned Off
-"printer-state-reasons.subunit-turned-off" = "Subunit Turned Off";
-// TRANSLATORS: Subunit Turned On
-"printer-state-reasons.subunit-turned-on" = "Subunit Turned On";
-// TRANSLATORS: Subunit Under Temperature
-"printer-state-reasons.subunit-under-temperature" = "Subunit Under Temperature";
-// TRANSLATORS: Subunit Unrecoverable Failure
-"printer-state-reasons.subunit-unrecoverable-failure" = "Subunit Unrecoverable Failure";
-// TRANSLATORS: Subunit Unrecoverable Storage
-"printer-state-reasons.subunit-unrecoverable-storage" = "Subunit Unrecoverable Storage";
-// TRANSLATORS: Subunit Warming Up
-"printer-state-reasons.subunit-warming-up" = "Subunit Warming Up";
-// TRANSLATORS: Printer stopped responding
-"printer-state-reasons.timed-out" = "Timed Out";
-// TRANSLATORS: Out of toner
-"printer-state-reasons.toner-empty" = "Toner Empty";
-// TRANSLATORS: Toner low
-"printer-state-reasons.toner-low" = "Toner Low";
-// TRANSLATORS: Trimmer Added
-"printer-state-reasons.trimmer-added" = "Trimmer Added";
-// TRANSLATORS: Trimmer Almost Empty
-"printer-state-reasons.trimmer-almost-empty" = "Trimmer Almost Empty";
-// TRANSLATORS: Trimmer Almost Full
-"printer-state-reasons.trimmer-almost-full" = "Trimmer Almost Full";
-// TRANSLATORS: Trimmer At Limit
-"printer-state-reasons.trimmer-at-limit" = "Trimmer At Limit";
-// TRANSLATORS: Trimmer Closed
-"printer-state-reasons.trimmer-closed" = "Trimmer Closed";
-// TRANSLATORS: Trimmer Configuration Change
-"printer-state-reasons.trimmer-configuration-change" = "Trimmer Configuration Change";
-// TRANSLATORS: Trimmer Cover Closed
-"printer-state-reasons.trimmer-cover-closed" = "Trimmer Cover Closed";
-// TRANSLATORS: Trimmer Cover Open
-"printer-state-reasons.trimmer-cover-open" = "Trimmer Cover Open";
-// TRANSLATORS: Trimmer Empty
-"printer-state-reasons.trimmer-empty" = "Trimmer Empty";
-// TRANSLATORS: Trimmer Full
-"printer-state-reasons.trimmer-full" = "Trimmer Full";
-// TRANSLATORS: Trimmer Interlock Closed
-"printer-state-reasons.trimmer-interlock-closed" = "Trimmer Interlock Closed";
-// TRANSLATORS: Trimmer Interlock Open
-"printer-state-reasons.trimmer-interlock-open" = "Trimmer Interlock Open";
-// TRANSLATORS: Trimmer Jam
-"printer-state-reasons.trimmer-jam" = "Trimmer Jam";
-// TRANSLATORS: Trimmer Life Almost Over
-"printer-state-reasons.trimmer-life-almost-over" = "Trimmer Life Almost Over";
-// TRANSLATORS: Trimmer Life Over
-"printer-state-reasons.trimmer-life-over" = "Trimmer Life Over";
-// TRANSLATORS: Trimmer Memory Exhausted
-"printer-state-reasons.trimmer-memory-exhausted" = "Trimmer Memory Exhausted";
-// TRANSLATORS: Trimmer Missing
-"printer-state-reasons.trimmer-missing" = "Trimmer Missing";
-// TRANSLATORS: Trimmer Motor Failure
-"printer-state-reasons.trimmer-motor-failure" = "Trimmer Motor Failure";
-// TRANSLATORS: Trimmer Near Limit
-"printer-state-reasons.trimmer-near-limit" = "Trimmer Near Limit";
-// TRANSLATORS: Trimmer Offline
-"printer-state-reasons.trimmer-offline" = "Trimmer Offline";
-// TRANSLATORS: Trimmer Opened
-"printer-state-reasons.trimmer-opened" = "Trimmer Opened";
-// TRANSLATORS: Trimmer Over Temperature
-"printer-state-reasons.trimmer-over-temperature" = "Trimmer Over Temperature";
-// TRANSLATORS: Trimmer Power Saver
-"printer-state-reasons.trimmer-power-saver" = "Trimmer Power Saver";
-// TRANSLATORS: Trimmer Recoverable Failure
-"printer-state-reasons.trimmer-recoverable-failure" = "Trimmer Recoverable Failure";
-// TRANSLATORS: Trimmer Recoverable Storage
-"printer-state-reasons.trimmer-recoverable-storage" = "Trimmer Recoverable Storage";
-// TRANSLATORS: Trimmer Removed
-"printer-state-reasons.trimmer-removed" = "Trimmer Removed";
-// TRANSLATORS: Trimmer Resource Added
-"printer-state-reasons.trimmer-resource-added" = "Trimmer Resource Added";
-// TRANSLATORS: Trimmer Resource Removed
-"printer-state-reasons.trimmer-resource-removed" = "Trimmer Resource Removed";
-// TRANSLATORS: Trimmer Thermistor Failure
-"printer-state-reasons.trimmer-thermistor-failure" = "Trimmer Thermistor Failure";
-// TRANSLATORS: Trimmer Timing Failure
-"printer-state-reasons.trimmer-timing-failure" = "Trimmer Timing Failure";
-// TRANSLATORS: Trimmer Turned Off
-"printer-state-reasons.trimmer-turned-off" = "Trimmer Turned Off";
-// TRANSLATORS: Trimmer Turned On
-"printer-state-reasons.trimmer-turned-on" = "Trimmer Turned On";
-// TRANSLATORS: Trimmer Under Temperature
-"printer-state-reasons.trimmer-under-temperature" = "Trimmer Under Temperature";
-// TRANSLATORS: Trimmer Unrecoverable Failure
-"printer-state-reasons.trimmer-unrecoverable-failure" = "Trimmer Unrecoverable Failure";
-// TRANSLATORS: Trimmer Unrecoverable Storage Error
-"printer-state-reasons.trimmer-unrecoverable-storage-error" = "Trimmer Unrecoverable Storage Error";
-// TRANSLATORS: Trimmer Warming Up
-"printer-state-reasons.trimmer-warming-up" = "Trimmer Warming Up";
-// TRANSLATORS: Unknown
-"printer-state-reasons.unknown" = "Unknown";
-// TRANSLATORS: Wrapper Added
-"printer-state-reasons.wrapper-added" = "Wrapper Added";
-// TRANSLATORS: Wrapper Almost Empty
-"printer-state-reasons.wrapper-almost-empty" = "Wrapper Almost Empty";
-// TRANSLATORS: Wrapper Almost Full
-"printer-state-reasons.wrapper-almost-full" = "Wrapper Almost Full";
-// TRANSLATORS: Wrapper At Limit
-"printer-state-reasons.wrapper-at-limit" = "Wrapper At Limit";
-// TRANSLATORS: Wrapper Closed
-"printer-state-reasons.wrapper-closed" = "Wrapper Closed";
-// TRANSLATORS: Wrapper Configuration Change
-"printer-state-reasons.wrapper-configuration-change" = "Wrapper Configuration Change";
-// TRANSLATORS: Wrapper Cover Closed
-"printer-state-reasons.wrapper-cover-closed" = "Wrapper Cover Closed";
-// TRANSLATORS: Wrapper Cover Open
-"printer-state-reasons.wrapper-cover-open" = "Wrapper Cover Open";
-// TRANSLATORS: Wrapper Empty
-"printer-state-reasons.wrapper-empty" = "Wrapper Empty";
-// TRANSLATORS: Wrapper Full
-"printer-state-reasons.wrapper-full" = "Wrapper Full";
-// TRANSLATORS: Wrapper Interlock Closed
-"printer-state-reasons.wrapper-interlock-closed" = "Wrapper Interlock Closed";
-// TRANSLATORS: Wrapper Interlock Open
-"printer-state-reasons.wrapper-interlock-open" = "Wrapper Interlock Open";
-// TRANSLATORS: Wrapper Jam
-"printer-state-reasons.wrapper-jam" = "Wrapper Jam";
-// TRANSLATORS: Wrapper Life Almost Over
-"printer-state-reasons.wrapper-life-almost-over" = "Wrapper Life Almost Over";
-// TRANSLATORS: Wrapper Life Over
-"printer-state-reasons.wrapper-life-over" = "Wrapper Life Over";
-// TRANSLATORS: Wrapper Memory Exhausted
-"printer-state-reasons.wrapper-memory-exhausted" = "Wrapper Memory Exhausted";
-// TRANSLATORS: Wrapper Missing
-"printer-state-reasons.wrapper-missing" = "Wrapper Missing";
-// TRANSLATORS: Wrapper Motor Failure
-"printer-state-reasons.wrapper-motor-failure" = "Wrapper Motor Failure";
-// TRANSLATORS: Wrapper Near Limit
-"printer-state-reasons.wrapper-near-limit" = "Wrapper Near Limit";
-// TRANSLATORS: Wrapper Offline
-"printer-state-reasons.wrapper-offline" = "Wrapper Offline";
-// TRANSLATORS: Wrapper Opened
-"printer-state-reasons.wrapper-opened" = "Wrapper Opened";
-// TRANSLATORS: Wrapper Over Temperature
-"printer-state-reasons.wrapper-over-temperature" = "Wrapper Over Temperature";
-// TRANSLATORS: Wrapper Power Saver
-"printer-state-reasons.wrapper-power-saver" = "Wrapper Power Saver";
-// TRANSLATORS: Wrapper Recoverable Failure
-"printer-state-reasons.wrapper-recoverable-failure" = "Wrapper Recoverable Failure";
-// TRANSLATORS: Wrapper Recoverable Storage
-"printer-state-reasons.wrapper-recoverable-storage" = "Wrapper Recoverable Storage";
-// TRANSLATORS: Wrapper Removed
-"printer-state-reasons.wrapper-removed" = "Wrapper Removed";
-// TRANSLATORS: Wrapper Resource Added
-"printer-state-reasons.wrapper-resource-added" = "Wrapper Resource Added";
-// TRANSLATORS: Wrapper Resource Removed
-"printer-state-reasons.wrapper-resource-removed" = "Wrapper Resource Removed";
-// TRANSLATORS: Wrapper Thermistor Failure
-"printer-state-reasons.wrapper-thermistor-failure" = "Wrapper Thermistor Failure";
-// TRANSLATORS: Wrapper Timing Failure
-"printer-state-reasons.wrapper-timing-failure" = "Wrapper Timing Failure";
-// TRANSLATORS: Wrapper Turned Off
-"printer-state-reasons.wrapper-turned-off" = "Wrapper Turned Off";
-// TRANSLATORS: Wrapper Turned On
-"printer-state-reasons.wrapper-turned-on" = "Wrapper Turned On";
-// TRANSLATORS: Wrapper Under Temperature
-"printer-state-reasons.wrapper-under-temperature" = "Wrapper Under Temperature";
-// TRANSLATORS: Wrapper Unrecoverable Failure
-"printer-state-reasons.wrapper-unrecoverable-failure" = "Wrapper Unrecoverable Failure";
-// TRANSLATORS: Wrapper Unrecoverable Storage Error
-"printer-state-reasons.wrapper-unrecoverable-storage-error" = "Wrapper Unrecoverable Storage Error";
-// TRANSLATORS: Wrapper Warming Up
-"printer-state-reasons.wrapper-warming-up" = "Wrapper Warming Up";
-// TRANSLATORS: Idle
-"printer-state.3" = "Idle";
-// TRANSLATORS: Processing
-"printer-state.4" = "Processing";
-// TRANSLATORS: Stopped
-"printer-state.5" = "Stopped";
-// TRANSLATORS: Printer Uptime
-"printer-up-time" = "Printer Uptime";
-"processing" = "processing";
-// TRANSLATORS: Proof Print
-"proof-print" = "Proof Print";
-// TRANSLATORS: Proof Print Copies
-"proof-print-copies" = "Proof Print Copies";
-// TRANSLATORS: Punching
-"punching" = "Punching";
-// TRANSLATORS: Punching Locations
-"punching-locations" = "Punching Locations";
-// TRANSLATORS: Punching Offset
-"punching-offset" = "Punching Offset";
-// TRANSLATORS: Punch Edge
-"punching-reference-edge" = "Punch Edge";
-// TRANSLATORS: Bottom
-"punching-reference-edge.bottom" = "Bottom";
-// TRANSLATORS: Left
-"punching-reference-edge.left" = "Left";
-// TRANSLATORS: Right
-"punching-reference-edge.right" = "Right";
-// TRANSLATORS: Top
-"punching-reference-edge.top" = "Top";
-"request id is %s-%d (%d file(s))" = "request id is %s-%d (%d file(s))";
-"request-id uses indefinite length" = "request-id uses indefinite length";
-// TRANSLATORS: Requested Attributes
-"requested-attributes" = "Requested Attributes";
-// TRANSLATORS: Retry Interval
-"retry-interval" = "Retry Interval";
-// TRANSLATORS: Retry Timeout
-"retry-time-out" = "Retry Timeout";
-// TRANSLATORS: Save Disposition
-"save-disposition" = "Save Disposition";
-// TRANSLATORS: None
-"save-disposition.none" = "None";
-// TRANSLATORS: Print and Save
-"save-disposition.print-save" = "Print and Save";
-// TRANSLATORS: Save Only
-"save-disposition.save-only" = "Save Only";
-// TRANSLATORS: Save Document Format
-"save-document-format" = "Save Document Format";
-// TRANSLATORS: Save Info
-"save-info" = "Save Info";
-// TRANSLATORS: Save Location
-"save-location" = "Save Location";
-// TRANSLATORS: Save Name
-"save-name" = "Save Name";
-"scheduler is not running" = "scheduler is not running";
-"scheduler is running" = "scheduler is running";
-// TRANSLATORS: Separator Sheets
-"separator-sheets" = "Separator Sheets";
-// TRANSLATORS: Type of Separator Sheets
-"separator-sheets-type" = "Type of Separator Sheets";
-// TRANSLATORS: Start and End Sheets
-"separator-sheets-type.both-sheets" = "Start and End Sheets";
-// TRANSLATORS: End Sheet
-"separator-sheets-type.end-sheet" = "End Sheet";
-// TRANSLATORS: None
-"separator-sheets-type.none" = "None";
-// TRANSLATORS: Slip Sheets
-"separator-sheets-type.slip-sheets" = "Slip Sheets";
-// TRANSLATORS: Start Sheet
-"separator-sheets-type.start-sheet" = "Start Sheet";
-// TRANSLATORS: 2-Sided Printing
-"sides" = "2-Sided Printing";
-// TRANSLATORS: Off
-"sides.one-sided" = "Off";
-// TRANSLATORS: On (Portrait)
-"sides.two-sided-long-edge" = "On (Portrait)";
-// TRANSLATORS: On (Landscape)
-"sides.two-sided-short-edge" = "On (Landscape)";
-"stat of %s failed: %s" = "stat of %s failed: %s";
-"status\t\tShow status of daemon and queue." = "status\t\tShow status of daemon and queue.";
-// TRANSLATORS: Status Message
-"status-message" = "Status Message";
-// TRANSLATORS: Staple
-"stitching" = "Staple";
-// TRANSLATORS: Stitching Angle
-"stitching-angle" = "Stitching Angle";
-// TRANSLATORS: Stitching Locations
-"stitching-locations" = "Stitching Locations";
-// TRANSLATORS: Staple Method
-"stitching-method" = "Staple Method";
-// TRANSLATORS: Automatic
-"stitching-method.auto" = "Automatic";
-// TRANSLATORS: Crimp
-"stitching-method.crimp" = "Crimp";
-// TRANSLATORS: Wire
-"stitching-method.wire" = "Wire";
-// TRANSLATORS: Stitching Offset
-"stitching-offset" = "Stitching Offset";
-// TRANSLATORS: Staple Edge
-"stitching-reference-edge" = "Staple Edge";
-// TRANSLATORS: Bottom
-"stitching-reference-edge.bottom" = "Bottom";
-// TRANSLATORS: Left
-"stitching-reference-edge.left" = "Left";
-// TRANSLATORS: Right
-"stitching-reference-edge.right" = "Right";
-// TRANSLATORS: Top
-"stitching-reference-edge.top" = "Top";
-"stopped" = "stopped";
-// TRANSLATORS: Subject
-"subject" = "Subject";
-// TRANSLATORS: Subscription Privacy Attributes
-"subscription-privacy-attributes" = "Subscription Privacy Attributes";
-// TRANSLATORS: All
-"subscription-privacy-attributes.all" = "All";
-// TRANSLATORS: Default
-"subscription-privacy-attributes.default" = "Default";
-// TRANSLATORS: None
-"subscription-privacy-attributes.none" = "None";
-// TRANSLATORS: Subscription Description
-"subscription-privacy-attributes.subscription-description" = "Subscription Description";
-// TRANSLATORS: Subscription Template
-"subscription-privacy-attributes.subscription-template" = "Subscription Template";
-// TRANSLATORS: Subscription Privacy Scope
-"subscription-privacy-scope" = "Subscription Privacy Scope";
-// TRANSLATORS: All
-"subscription-privacy-scope.all" = "All";
-// TRANSLATORS: Default
-"subscription-privacy-scope.default" = "Default";
-// TRANSLATORS: None
-"subscription-privacy-scope.none" = "None";
-// TRANSLATORS: Owner
-"subscription-privacy-scope.owner" = "Owner";
-"system default destination: %s" = "system default destination: %s";
-"system default destination: %s/%s" = "system default destination: %s/%s";
-// TRANSLATORS: T33 Subaddress
-"t33-subaddress" = "T33 Subaddress";
-// TRANSLATORS: To Name
-"to-name" = "To Name";
-// TRANSLATORS: Transmission Status
-"transmission-status" = "Transmission Status";
-// TRANSLATORS: Pending
-"transmission-status.3" = "Pending";
-// TRANSLATORS: Pending Retry
-"transmission-status.4" = "Pending Retry";
-// TRANSLATORS: Processing
-"transmission-status.5" = "Processing";
-// TRANSLATORS: Canceled
-"transmission-status.7" = "Canceled";
-// TRANSLATORS: Aborted
-"transmission-status.8" = "Aborted";
-// TRANSLATORS: Completed
-"transmission-status.9" = "Completed";
-// TRANSLATORS: Cut
-"trimming" = "Cut";
-// TRANSLATORS: Cut Position
-"trimming-offset" = "Cut Position";
-// TRANSLATORS: Cut Edge
-"trimming-reference-edge" = "Cut Edge";
-// TRANSLATORS: Bottom
-"trimming-reference-edge.bottom" = "Bottom";
-// TRANSLATORS: Left
-"trimming-reference-edge.left" = "Left";
-// TRANSLATORS: Right
-"trimming-reference-edge.right" = "Right";
-// TRANSLATORS: Top
-"trimming-reference-edge.top" = "Top";
-// TRANSLATORS: Type of Cut
-"trimming-type" = "Type of Cut";
-// TRANSLATORS: Draw Line
-"trimming-type.draw-line" = "Draw Line";
-// TRANSLATORS: Full
-"trimming-type.full" = "Full";
-// TRANSLATORS: Partial
-"trimming-type.partial" = "Partial";
-// TRANSLATORS: Perforate
-"trimming-type.perforate" = "Perforate";
-// TRANSLATORS: Score
-"trimming-type.score" = "Score";
-// TRANSLATORS: Tab
-"trimming-type.tab" = "Tab";
-// TRANSLATORS: Cut After
-"trimming-when" = "Cut After";
-// TRANSLATORS: Every Document
-"trimming-when.after-documents" = "Every Document";
-// TRANSLATORS: Job
-"trimming-when.after-job" = "Job";
-// TRANSLATORS: Every Set
-"trimming-when.after-sets" = "Every Set";
-// TRANSLATORS: Every Page
-"trimming-when.after-sheets" = "Every Page";
-"unknown" = "unknown";
-"untitled" = "untitled";
-"variable-bindings uses indefinite length" = "variable-bindings uses indefinite length";
-// TRANSLATORS: X Accuracy
-"x-accuracy" = "X Accuracy";
-// TRANSLATORS: X Dimension
-"x-dimension" = "X Dimension";
-// TRANSLATORS: X Offset
-"x-offset" = "X Offset";
-// TRANSLATORS: X Origin
-"x-origin" = "X Origin";
-// TRANSLATORS: Y Accuracy
-"y-accuracy" = "Y Accuracy";
-// TRANSLATORS: Y Dimension
-"y-dimension" = "Y Dimension";
-// TRANSLATORS: Y Offset
-"y-offset" = "Y Offset";
-// TRANSLATORS: Y Origin
-"y-origin" = "Y Origin";
-// TRANSLATORS: Z Accuracy
-"z-accuracy" = "Z Accuracy";
-// TRANSLATORS: Z Dimension
-"z-dimension" = "Z Dimension";
-// TRANSLATORS: Z Offset
-"z-offset" = "Z Offset";
-"{service_domain} Domain name" = "{service_domain} Domain name";
-"{service_hostname} Fully-qualified domain name" = "{service_hostname} Fully-qualified domain name";
-"{service_name} Service instance name" = "{service_name} Service instance name";
-"{service_port} Port number" = "{service_port} Port number";
-"{service_regtype} DNS-SD registration type" = "{service_regtype} DNS-SD registration type";
-"{service_scheme} URI scheme" = "{service_scheme} URI scheme";
-"{service_uri} URI" = "{service_uri} URI";
-"{txt_*} Value of TXT record key" = "{txt_*} Value of TXT record key";
-"{} URI" = "{} URI";
-"~/.cups/lpoptions file names default destination that does not exist." = "~/.cups/lpoptions file names default destination that does not exist.";
projects / thirdparty / cups.git / commitdiff
