#Use this to include other text into the file.
#include: "otherfile.conf"
-# The server clause sets the main parameters.
+# The server clause sets the main parameters.
server:
# whitespace is not necessary, but looks cleaner.
# interface: 2001:DB8::5
# enable this feature to copy the source address of queries to reply.
- # Socket options are not supported on all platforms. experimental.
+ # Socket options are not supported on all platforms. experimental.
# interface-automatic: no
# port to answer queries from
# buffer size for UDP port 53 outgoing (SO_SNDBUF socket option).
# 0 is system default. Use 4m to handle spikes on very busy servers.
# so-sndbuf: 0
-
+
# use SO_REUSEPORT to distribute queries over threads.
# so-reuseport: no
-
+
# use IP_TRANSPARENT so the interface: addresses can be non-local
# and you can config non-existing IPs that are going to work later on
# ip-transparent: no
# msg-buffer-size: 65552
# the amount of memory to use for the message cache.
- # plain value in bytes or you can append k, m or G. default is "4Mb".
+ # plain value in bytes or you can append k, m or G. default is "4Mb".
# msg-cache-size: 4m
# the number of slabs to use for the message cache.
# if very busy, 50% queries run to completion, 50% get timeout in msec
# jostle-timeout: 200
-
+
# msec to wait before close of port on timeout UDP. 0 disables.
# delay-close: 0
# the amount of memory to use for the RRset cache.
- # plain value in bytes or you can append k, m or G. default is "4Mb".
+ # plain value in bytes or you can append k, m or G. default is "4Mb".
# rrset-cache-size: 4m
# the number of slabs to use for the RRset cache.
# the time to live (TTL) value for cached roundtrip times, lameness and
# EDNS version information for hosts. In seconds.
# infra-host-ttl: 900
-
+
# minimum wait time for responses, increase if uplink is long. In msec.
# infra-cache-min-rtt: 50
#
# If chroot is enabled, you should pass the configfile (from the
# commandline) as a full path from the original root. After the
- # chroot has been performed the now defunct portion of the config
- # file path is removed to be able to reread the config after a reload.
+ # chroot has been performed the now defunct portion of the config
+ # file path is removed to be able to reread the config after a reload.
#
# All other file paths (working dir, logfile, roothints, and
# key files) can be specified in several ways:
# o as an absolute path relative to the original root.
# In the last case the path is adjusted to remove the unused portion.
#
- # The pid file can be absolute and outside of the chroot, it is
+ # The pid file can be absolute and outside of the chroot, it is
# written just prior to performing the chroot and dropping permissions.
#
# Additionally, unbound may need to access /dev/random (for entropy).
# If you give "" no privileges are dropped.
# username: "@UNBOUND_USERNAME@"
- # the working directory. The relative files in this config are
+ # the working directory. The relative files in this config are
# relative to this directory. If you give "" the working directory
# is not changed.
# directory: "@UNBOUND_RUN_DIR@"
- # the log file, "" means log to stderr.
+ # the log file, "" means log to stderr.
# Use of this option sets use-syslog to "no".
# logfile: ""
- # Log to syslog(3) if yes. The log facility LOG_DAEMON is used to
+ # Log to syslog(3) if yes. The log facility LOG_DAEMON is used to
# log to, with identity "unbound". If yes, it overrides the logfile.
- # use-syslog: yes
+ # use-syslog: yes
# print UTC timestamp in ascii to logfile, default is epoch in seconds.
# log-time-ascii: no
-
+
# print one line with time, IP, name, type, class for every query.
# log-queries: no
# version: ""
# the target fetch policy.
- # series of integers describing the policy per dependency depth.
- # The number of values in the list determines the maximum dependency
+ # series of integers describing the policy per dependency depth.
+ # The number of values in the list determines the maximum dependency
# depth the recursor will pursue before giving up. Each integer means:
# -1 : fetch all targets opportunistically,
# 0: fetch on demand,
# Enclose the list of numbers between quotes ("").
# target-fetch-policy: "3 2 1 0 0"
- # Harden against very small EDNS buffer sizes.
+ # Harden against very small EDNS buffer sizes.
# harden-short-bufsize: no
# Harden against unseemly large queries.
# harden-large-queries: no
- # Harden against out of zone rrsets, to avoid spoofing attempts.
+ # Harden against out of zone rrsets, to avoid spoofing attempts.
# harden-glue: yes
# Harden against receiving dnssec-stripped data. If you turn it
- # off, failing to validate dnskey data for a trustanchor will
+ # off, failing to validate dnskey data for a trustanchor will
# trigger insecure mode for that zone (like without a trustanchor).
# Default on, which insists on dnssec data for trust-anchored zones.
# harden-dnssec-stripped: yes
# Harden the referral path by performing additional queries for
# infrastructure data. Validates the replies (if possible).
- # Default off, because the lookups burden the server. Experimental
+ # Default off, because the lookups burden the server. Experimental
# implementation of draft-wijngaards-dnsext-resolver-side-mitigation.
# harden-referral-path: no
# to validate the zone.
# harden-algo-downgrade: no
- # Sent minimum amount of information to upstream servers to enhance
+ # Sent minimum amount of information to upstream servers to enhance
# privacy. Only sent minimum required labels of the QNAME and set QTYPE
# to NS when possible.
# qname-minimisation: no
# Use 0x20-encoded random bits in the query to foil spoof attempts.
# This feature is an experimental implementation of draft dns-0x20.
# use-caps-for-id: no
-
+
# Domains (and domains in them) without support for dns-0x20 and
# the fallback fails because they keep sending different answers.
# caps-whitelist: "licdn.com"
- # Enforce privacy of these addresses. Strips them away from answers.
- # It may cause DNSSEC validation to additionally mark it as bogus.
- # Protects against 'DNS Rebinding' (uses browser as network proxy).
- # Only 'private-domain' and 'local-data' names are allowed to have
+ # Enforce privacy of these addresses. Strips them away from answers.
+ # It may cause DNSSEC validation to additionally mark it as bogus.
+ # Protects against 'DNS Rebinding' (uses browser as network proxy).
+ # Only 'private-domain' and 'local-data' names are allowed to have
# these private addresses. No default.
# private-address: 10.0.0.0/8
# private-address: 172.16.0.0/12
# Zone file format, with DS and DNSKEY entries.
# Note this gets out of date, use auto-trust-anchor-file please.
# trust-anchor-file: ""
-
+
# Trusted key for validation. DS or DNSKEY. specify the RR on a
# single line, surrounded by "". TTL is ignored. class is IN default.
# Note this gets out of date, use auto-trust-anchor-file please.
# File with trusted keys for validation. Specify more than one file
# with several entries, one file per entry. Like trust-anchor-file
- # but has a different file format. Format is BIND-9 style format,
+ # but has a different file format. Format is BIND-9 style format,
# the trusted-keys { name flag proto algo "key"; }; clauses are read.
# you need external update procedures to track changes in keys.
# trusted-keys-file: ""
# Should additional section of secure message also be kept clean of
# unsecure data. Useful to shield the users of this validator from
- # potential bogus data in the additional section. All unsigned data
+ # potential bogus data in the additional section. All unsigned data
# in the additional section is removed from secure messages.
# val-clean-additional: yes
# A message with an NSEC3 with larger count is marked insecure.
# List in ascending order the keysize and count values.
# val-nsec3-keysize-iterations: "1024 150 2048 500 4096 2500"
-
+
# instruct the auto-trust-anchor-file probing to add anchors after ttl.
# add-holddown: 2592000 # 30 days
# permit-small-holddown: no
# the amount of memory to use for the key cache.
- # plain value in bytes or you can append k, m or G. default is "4Mb".
+ # plain value in bytes or you can append k, m or G. default is "4Mb".
# key-cache-size: 4m
# the number of slabs to use for the key cache.
# key-cache-slabs: 4
# the amount of memory to use for the negative cache (used for DLV).
- # plain value in bytes or you can append k, m or G. default is "1Mb".
+ # plain value in bytes or you can append k, m or G. default is "1Mb".
# neg-cache-size: 1m
# By default, for a number of zones a small default 'nothing here'
# local-zone: "b.e.f.ip6.arpa." nodefault
# local-zone: "8.b.d.0.1.0.0.2.ip6.arpa." nodefault
# And for 64.100.in-addr.arpa. to 127.100.in-addr.arpa.
-
+
# if unbound is running service for the local host then it is useful
# to perform lan-wide lookups to the upstream, and unblock the
# long list of local-zones above. If this unbound is a dns server
# a number of locally served zones can be configured.
# local-zone: <zone> <type>
# local-data: "<resource record string>"
- # o deny serves local data (if any), else, drops queries.
+ # o deny serves local data (if any), else, drops queries.
# o refuse serves local data (if any), else, replies with error.
# o static serves local data, else, nxdomain or nodata answer.
# o transparent gives local data, but resolves normally for other names
# defaults are localhost address, reverse for 127.0.0.1 and ::1
# and nxdomain for AS112 zones. If you configure one of these zones
# the default content is omitted, or you can omit it with 'nodefault'.
- #
+ #
# If you configure local-data without specifying local-zone, by
# default a transparent local-zone is created for the data.
#
# ratelimit-size: 4m
# ratelimit cache slabs, reduces lock contention if equal to cpucount.
# ratelimit-slabs: 4
-
+
# 0 blocks when ratelimited, otherwise let 1/xth traffic through
# ratelimit-factor: 10
# Script file to load
# python-script: "@UNBOUND_SHARE_DIR@/ubmodule-tst.py"
-# Remote control config section.
+# Remote control config section.
remote-control:
# Enable remote control with unbound-control(8) here.
# set up the keys and certificates with unbound-control-setup.
# control-cert-file: "@UNBOUND_RUN_DIR@/unbound_control.pem"
# Stub zones.
-# Create entries like below, to make all queries for 'example.com' and
-# 'example.org' go to the given list of nameservers. list zero or more
-# nameservers by hostname or by ipaddress. If you set stub-prime to yes,
+# Create entries like below, to make all queries for 'example.com' and
+# 'example.org' go to the given list of nameservers. list zero or more
+# nameservers by hostname or by ipaddress. If you set stub-prime to yes,
# the list is treated as priming hints (default is no).
# With stub-first yes, it attempts without the stub if it fails.
# Consider adding domain-insecure: name and local-zone: name nodefault
projects / thirdparty / unbound.git / commitdiff
