-From: Sebastian Gottschall <s.gottschall@newmedia-net.de>
-
-Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984 based
-chipsets with on chipset connected led's using WMI Firmware API. The LED
-device will get available named as "ath10k-phyX" at sysfs and can be controlled
-with various triggers. adds also debugfs interface for gpio control.
-
-This patch is specific for OpenWRt base, as is use old backported package
-with old wireless source. Support for QCA9984 is removed.
-Reworked to use ath10k-ct custom source
+From 8e1debd82466a3fe711784ab37e6b54e56011267 Mon Sep 17 00:00:00 2001
+From: Sebastian Gottschall <s.gottschall@dd-wrt.com>
+Date: Mon, 13 May 2024 17:22:25 +0300
+Subject: [PATCH] wifi: ath10k: add LED and GPIO controlling support for
+ various chipsets
+Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984
+based chipsets with on chipset connected led's using WMI Firmware API.
+The LED device will get available named as "ath10k-phyX" at sysfs and
+can be controlled with various triggers.
+Adds also debugfs interface for gpio control.
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
[kvalo: major reorg and cleanup]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
+[ansuel: rebase and small cleanup]
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
---
-
-v13:
-
-* only compile tested!
-
-* fix all checkpatch warnings
-
-* fix commit log
-
-* sizeof(struct ath10k_gpiocontrol) -> sizeof(*gpio)
-
-* unsigned -> unsigned int
-
-* remove GPIOLIB code, that should be added in a separate patch
-
-* rename gpio.c to leds.c
-
-* add leds.h
-
-* rename some functions:
-
- ath10k_attach_led() -> ath10k_leds_register()
- ath10k_unregister_led() -> ath10k_leds_unregister()
- ath10k_reset_led_pin() -> ath10k_leds_start()
-
-* call ath10k_leds_unregister() before ath10k_thermal_unregister() to preserve ordering
-
-* call ath10k_leds_start() only from ath10k_core_start() and not from mac.c
-
-* rename struct ath10k_gpiocontrol as anonymous function under struct
- ath10k::leds, no need for memory allocation
-
-* merge ath10k_add_led() to ath10k_attach_led(), which is it's only caller
-
-* remove #if IS_ENABLED() checks from most of places, memory savings from those were not worth it
-
-* Kconfig help text improvement and move it lower in the menu, also don't enable it by default
-
-* switch to set_brightness_blocking() so that the callback can sleep,
- then no need to use ath10k_wmi_cmd_send_nowait() and can take mutex
- to access ar->state
-
-* don't touch ath10k_wmi_pdev_get_temperature()
-
-* as QCA6174/QCA9377 are not (yet) supported don't add the command to WMI-TLV interface
-
-* remove debugfs interface, that should be added in another patch
-
-* cleanup includes
-
- ath10k-6.4/Kconfig | 10 +++
- ath10k-6.4/Makefile | 1 +
- ath10k-6.4/core.c | 22 +++++++
- ath10k-6.4/core.h | 9 ++-
- ath10k-6.4/hw.h | 1 +
- ath10k-6.4/leds.c | 103 ++++++++++++++++++++++++++++++
- ath10k-6.4/leds.h | 45 +++++++++++++
- ath10k-6.4/mac.c | 1 +
- ath10k-6.4/wmi-ops.h | 32 ++++++++++
- ath10k-6.4/wmi-tlv.c | 2 +
- ath10k-6.4/wmi.c | 54 ++++++++++++++++
- ath10k-6.4/wmi.h | 35 ++++++++++
- 12 files changed, 314 insertions(+), 1 deletion(-)
+ ath10k-6.4/Kconfig | 6 ++
+ ath10k-6.4/Makefile | 1 +
+ ath10k-6.4/core.c | 32 ++++++++
+ ath10k-6.4/core.h | 8 ++
+ ath10k-6.4/hw.h | 1 +
+ ath10k-6.4/leds.c | 90 +++++++++++++++++++++++
+ ath10k-6.4/leds.h | 34 +++++++++
+ ath10k-6.4/mac.c | 1 +
+ ath10k-6.4/wmi-ops.h | 32 ++++++++
+ ath10k-6.4/wmi-tlv.c | 2 +
+ ath10k-6.4/wmi.c | 54 ++++++++++++++
+ ath10k-6.4/wmi.h | 35 +++++++++
+ 12 files changed, 296 insertions(+)
create mode 100644 ath10k-6.4/leds.c
create mode 100644 ath10k-6.4/leds.h
--- a/ath10k-6.4/Kconfig
+++ b/ath10k-6.4/Kconfig
-@@ -67,6 +67,16 @@ config ATH10K_DEBUGFS
+@@ -67,6 +67,12 @@ config ATH10K_DEBUGFS
If unsure, say Y to make it easier to debug problems.
+config ATH10K_LEDS
-+ bool "Atheros ath10k LED support"
++ bool
+ depends on ATH10K
-+ select MAC80211_LEDS
-+ select LEDS_CLASS
-+ select NEW_LEDS
++ depends on LEDS_CLASS=y || LEDS_CLASS=MAC80211
+ default y
-+ ---help---
-+ This option is necessary, if you want LED support for chipset connected led pins. If unsure, say N.
+
config ATH10K_SPECTRAL
bool "Atheros ath10k spectral scan support"
/* Disable ath10k-ct DBGLOG output by default */
unsigned int ath10k_debug_mask = ATH10K_DBG_NO_DBGLOG;
-@@ -78,6 +79,7 @@ static const struct ath10k_hw_params ath
- .dev_id = QCA988X_2_0_DEVICE_ID,
- .bus = ATH10K_BUS_PCI,
+@@ -80,6 +81,7 @@ static const struct ath10k_hw_params ath
.name = "qca988x hw2.0",
+ .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
+ .uart_pin = 7,
+ .led_pin = 1,
+ .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+@@ -120,6 +122,7 @@ static const struct ath10k_hw_params ath
+ .name = "qca988x hw2.0 ubiquiti",
.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
++ .led_pin = 0,
.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
-@@ -159,6 +161,7 @@ static const struct ath10k_hw_params ath
- .dev_id = QCA9887_1_0_DEVICE_ID,
- .bus = ATH10K_BUS_PCI,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+@@ -161,6 +164,7 @@ static const struct ath10k_hw_params ath
.name = "qca9887 hw1.0",
-+ .led_pin = 1,
.patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
++ .led_pin = 1,
.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
-@@ -400,6 +403,7 @@ static const struct ath10k_hw_params ath
- .dev_id = QCA99X0_2_0_DEVICE_ID,
- .bus = ATH10K_BUS_PCI,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+@@ -202,6 +206,7 @@ static const struct ath10k_hw_params ath
+ .name = "qca6174 hw3.2 sdio",
+ .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
+ .uart_pin = 19,
++ .led_pin = 0,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+ .max_probe_resp_desc_thres = 0,
+@@ -238,6 +243,7 @@ static const struct ath10k_hw_params ath
+ .name = "qca6164 hw2.1",
+ .patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
+ .uart_pin = 6,
++ .led_pin = 0,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+ .max_probe_resp_desc_thres = 0,
+@@ -278,6 +284,7 @@ static const struct ath10k_hw_params ath
+ .name = "qca6174 hw2.1",
+ .patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
+ .uart_pin = 6,
++ .led_pin = 0,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+ .max_probe_resp_desc_thres = 0,
+@@ -318,6 +325,7 @@ static const struct ath10k_hw_params ath
+ .name = "qca6174 hw3.0",
+ .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
+ .uart_pin = 6,
++ .led_pin = 0,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+ .max_probe_resp_desc_thres = 0,
+@@ -358,6 +366,7 @@ static const struct ath10k_hw_params ath
+ .name = "qca6174 hw3.2",
+ .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
+ .uart_pin = 6,
++ .led_pin = 0,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+ .max_probe_resp_desc_thres = 0,
+@@ -402,6 +411,7 @@ static const struct ath10k_hw_params ath
.name = "qca99x0 hw2.0",
-+ .led_pin = 17,
.patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
++ .led_pin = 17,
.otp_exe_param = 0x00000700,
-@@ -446,6 +450,7 @@ static const struct ath10k_hw_params ath
- .dev_id = QCA9984_1_0_DEVICE_ID,
- .bus = ATH10K_BUS_PCI,
+ .continuous_frag_desc = true,
+ .cck_rate_map_rev2 = true,
+@@ -448,6 +458,7 @@ static const struct ath10k_hw_params ath
.name = "qca9984/qca9994 hw1.0",
-+ .led_pin = 17,
.patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
++ .led_pin = 17,
.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
-@@ -499,6 +504,7 @@ static const struct ath10k_hw_params ath
- .dev_id = QCA9888_2_0_DEVICE_ID,
- .bus = ATH10K_BUS_PCI,
+ .otp_exe_param = 0x00000700,
+ .continuous_frag_desc = true,
+@@ -501,6 +512,7 @@ static const struct ath10k_hw_params ath
.name = "qca9888 hw2.0",
-+ .led_pin = 17,
.patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
++ .led_pin = 17,
+ .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
+ .otp_exe_param = 0x00000700,
+ .continuous_frag_desc = true,
+@@ -551,6 +563,7 @@ static const struct ath10k_hw_params ath
+ .name = "qca9377 hw1.0",
+ .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
+ .uart_pin = 6,
++ .led_pin = 0,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+ .max_probe_resp_desc_thres = 0,
+@@ -591,6 +604,7 @@ static const struct ath10k_hw_params ath
+ .name = "qca9377 hw1.1",
+ .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
+ .uart_pin = 6,
++ .led_pin = 0,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+ .max_probe_resp_desc_thres = 0,
+@@ -633,6 +647,7 @@ static const struct ath10k_hw_params ath
+ .name = "qca9377 hw1.1 sdio",
+ .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
+ .uart_pin = 19,
++ .led_pin = 0,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+ .max_probe_resp_desc_thres = 0,
+@@ -666,6 +681,7 @@ static const struct ath10k_hw_params ath
+ .name = "qca4019 hw1.0",
+ .patch_load_addr = QCA4019_HW_1_0_PATCH_LOAD_ADDR,
+ .uart_pin = 7,
++ .led_pin = 0,
.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
-@@ -4080,6 +4086,10 @@ int ath10k_core_start(struct ath10k *ar,
+ .otp_exe_param = 0x0010000,
+ .continuous_frag_desc = true,
+@@ -711,6 +727,7 @@ static const struct ath10k_hw_params ath
+ .dev_id = 0,
+ .bus = ATH10K_BUS_SNOC,
+ .name = "wcn3990 hw1.0",
++ .led_pin = 0,
+ .continuous_frag_desc = true,
+ .tx_chain_mask = 0x7,
+ .rx_chain_mask = 0x7,
+@@ -4080,6 +4097,10 @@ int ath10k_core_start(struct ath10k *ar,
ath10k_wmi_check_apply_board_power_ctl_table(ar);
}
return 0;
err_hif_stop:
-@@ -4341,9 +4351,18 @@ static void ath10k_core_register_work(st
+@@ -4341,9 +4362,18 @@ static void ath10k_core_register_work(st
goto err_spectral_destroy;
}
err_spectral_destroy:
ath10k_spectral_destroy(ar);
err_debug_destroy:
-@@ -4403,6 +4422,8 @@ void ath10k_core_unregister(struct ath10
+@@ -4403,6 +4433,8 @@ void ath10k_core_unregister(struct ath10
if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags))
return;
/* Type of hw cycle counter wraparound logic, for more info
--- /dev/null
+++ b/ath10k-6.4/leds.c
-@@ -0,0 +1,103 @@
+@@ -0,0 +1,90 @@
++// SPDX-License-Identifier: ISC
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
+ * Copyright (c) 2018 Sebastian Gottschall <s.gottschall@dd-wrt.com>
-+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ * Copyright (c) 2018 The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/leds.h>
+
+ ar->leds.cdev.name = ar->leds.label;
+ ar->leds.cdev.brightness_set_blocking = ath10k_leds_set_brightness_blocking;
-+
-+ /* FIXME: this assignment doesn't make sense as it's NULL, remove it? */
+ ar->leds.cdev.default_trigger = ar->leds.wifi_led.default_trigger;
+
+ ret = led_classdev_register(wiphy_dev(ar->hw->wiphy), &ar->leds.cdev);
+
--- /dev/null
+++ b/ath10k-6.4/leds.h
-@@ -0,0 +1,41 @@
+@@ -0,0 +1,34 @@
++/* SPDX-License-Identifier: ISC */
+/*
-+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ * Copyright (c) 2005-2011 Atheros Communications Inc.
++ * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
++ * Copyright (c) 2018 Sebastian Gottschall <s.gottschall@dd-wrt.com>
++ * Copyright (c) 2018 The Linux Foundation. All rights reserved.
+ */
++
+#ifndef _LEDS_H_
+#define _LEDS_H_
+
projects / thirdparty / openwrt.git / commitdiff
