hwmon: (pmbus/adp1050) Add support for adp1051, adp1055 and ltp8800

Introduce hardware monitoring support for the following devices:

    ADP1051: 6 PWM for I/O Voltage, I/O Current, Temperature
    ADP1055: 6 PWM for I/O Voltage, I/O Current, Power, Temperature
    LTP8800-1A/-2/-4A: 150A/135A/200A DC/DC µModule Regulator

The ADP1051 and ADP1055 are similar digital controllers for high
efficiency DC-DC power conversion while the LTP8800 is a family of
step-down μModule regulators that provides microprocessor core voltage
from 54V power distribution architecture. All of the above components
features telemetry monitoring of input/output voltage, input current,
output power, and temperature over PMBus.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Co-developed-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Signed-off-by: Cedric Encarnacion <cedricjustine.encarnacion@analog.com>
Link: https://lore.kernel.org/r/20250709-adp1051-v5-2-539254692252@analog.com
[groeck: Dropped unnecessaary spaces after type casts]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

diff --git a/Documentation/hwmon/adp1050.rst b/Documentation/hwmon/adp1050.rst
index 8fa937064886aba7098884c458265722411be553..32514084fbdca5d7fc5a8a2b0df97c7380d76516 100644 (file)
--- a/Documentation/hwmon/adp1050.rst
+++ b/Documentation/hwmon/adp1050.rst
@@ -13,6 +13,32 @@ Supported chips:
 
     Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADP1050.pdf
 
+  * Analog Devices ADP1051
+
+    Prefix: 'adp1051'
+
+    Addresses scanned: I2C 0x70 - 0x77
+
+    Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADP1051.pdf
+
+  * Analog Devices ADP1055
+
+    Prefix: 'adp1055'
+
+    Addresses scanned: I2C 0x4B - 0x77
+
+    Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADP1055.pdf
+
+  * Analog Devices LTP8800-1A/-2/-4A
+
+    Prefix: 'ltp8800'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/LTP8800-1A.pdf
+         https://www.analog.com/media/en/technical-documentation/data-sheets/LTP8800-2.pdf
+         https://www.analog.com/media/en/technical-documentation/data-sheets/LTP8800-4A.pdf
+
 Authors:
 
   - Radu Sabau <radu.sabau@analog.com>
@@ -21,14 +47,17 @@ Authors:
 Description
 -----------
 
-This driver supprts hardware monitoring for Analog Devices ADP1050 Digital
-Controller for Isolated Power Supply with PMBus interface.
+This driver supports hardware monitoring for Analog Devices ADP1050, ADP1051,
+and ADP1055 Digital Controller for Isolated Power Supply with PMBus interface,
+and the LTP8800 step-down μModule regulators.
 
-The ADP1050 is an advanced digital controller with a PMBus™
+The ADP1050, ADP1051, and ADP1055 are advanced digital controllers with PMBus™
 interface targeting high density, high efficiency dc-to-dc power
-conversion used to monitor system temperatures, voltages and currents.
-Through the PMBus interface, the device can monitor input/output voltages,
-input current and temperature.
+conversion used to monitor system temperatures, voltages and currents. The
+LTP8800 is a family of step-down μModule regulators that provides microprocessor
+core voltage from 54V power distribution architecture. Through the PMBus
+interface, the device can monitor input/output voltages, input current and
+temperature.
 
 Usage Notes
 -----------
@@ -49,16 +78,46 @@ Sysfs Attributes
 in1_label         "vin"
 in1_input         Measured input voltage
 in1_alarm        Input voltage alarm
+in1_crit          Critical maximum input voltage
+in1_crit_alarm    Input voltage high alarm
+in1_lcrit         Critical minimum input voltage
+in1_lcrit_alarm   Input voltage critical low alarm
 in2_label        "vout1"
 in2_input        Measured output voltage
 in2_crit         Critical maximum output voltage
 in2_crit_alarm    Output voltage high alarm
 in2_lcrit        Critical minimum output voltage
 in2_lcrit_alarm          Output voltage critical low alarm
+in2_max           Critical maximum output voltage
+in2_max_alarm     Output voltage critical max alarm
+in2_min           Critical minimum output voltage
+in2_min_alarm     Output voltage critical min alarm
 curr1_label      "iin"
 curr1_input      Measured input current.
 curr1_alarm      Input current alarm
+curr1_crit        Critical maximum input current
+curr1_crit_alarm  Input current high alarm
+curr2_label       "iout1"
+curr2_input       Measured output current
+curr2_alarm      Output current alarm
+curr2_crit        Critical maximum output current
+curr2_crit_alarm  Output current high alarm
+curr2_lcrit       Critical minimum output current
+curr2_lcrit_alarm Output current critical low alarm
+curr2_max         Critical maximum output current
+curr2_max_alarm   Output current critical max alarm
+power1_label      "pout1"
+power1_input      Measured output power
+power1_crit       Critical maximum output power
+power1_crit_alarm Output power high alarm
 temp1_input       Measured temperature
 temp1_crit       Critical high temperature
 temp1_crit_alarm  Chip temperature critical high alarm
+temp1_max         Critical maximum temperature
+temp1_max_alarm   Temperature critical max alarm
+temp2_input       Measured temperature
+temp2_crit        Critical high temperature
+temp2_crit_alarm  Chip temperature critical high alarm
+temp2_max         Critical maximum temperature
+temp2_max_alarm   Temperature critical max alarm
 ================= ========================================

diff --git a/drivers/hwmon/pmbus/adp1050.c b/drivers/hwmon/pmbus/adp1050.c
index ef46c880b168bd0378030fda2397d075221f3723..1ffb189f4b6f0cd3a268895be9a61f0347a278e6 100644 (file)
--- a/drivers/hwmon/pmbus/adp1050.c
+++ b/drivers/hwmon/pmbus/adp1050.c
@@ -23,19 +23,75 @@ static struct pmbus_driver_info adp1050_info = {
                | PMBUS_HAVE_STATUS_TEMP,
 };
 
+static struct pmbus_driver_info adp1051_info = {
+       .pages = 1,
+       .format[PSC_VOLTAGE_IN] = linear,
+       .format[PSC_VOLTAGE_OUT] = linear,
+       .format[PSC_CURRENT_IN] = linear,
+       .format[PSC_TEMPERATURE] = linear,
+       .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
+               | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT
+               | PMBUS_HAVE_TEMP
+               | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
+               | PMBUS_HAVE_STATUS_INPUT
+               | PMBUS_HAVE_STATUS_TEMP,
+};
+
+static struct pmbus_driver_info adp1055_info = {
+       .pages = 1,
+       .format[PSC_VOLTAGE_IN] = linear,
+       .format[PSC_VOLTAGE_OUT] = linear,
+       .format[PSC_CURRENT_IN] = linear,
+       .format[PSC_TEMPERATURE] = linear,
+       .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
+               | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT
+               | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3
+               | PMBUS_HAVE_POUT
+               | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
+               | PMBUS_HAVE_STATUS_INPUT
+               | PMBUS_HAVE_STATUS_TEMP,
+};
+
+static struct pmbus_driver_info ltp8800_info = {
+       .pages = 1,
+       .format[PSC_VOLTAGE_IN] = linear,
+       .format[PSC_VOLTAGE_OUT] = linear,
+       .format[PSC_CURRENT_IN] = linear,
+       .format[PSC_TEMPERATURE] = linear,
+       .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
+               | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT
+               | PMBUS_HAVE_TEMP
+               | PMBUS_HAVE_POUT
+               | PMBUS_HAVE_STATUS_VOUT
+               | PMBUS_HAVE_STATUS_INPUT
+               | PMBUS_HAVE_STATUS_TEMP,
+};
+
 static int adp1050_probe(struct i2c_client *client)
 {
-       return pmbus_do_probe(client, &adp1050_info);
+       struct pmbus_driver_info *info;
+
+       info = (struct pmbus_driver_info *)i2c_get_match_data(client);
+       if (!info)
+               return -ENODEV;
+
+       return pmbus_do_probe(client, info);
 }
 
 static const struct i2c_device_id adp1050_id[] = {
-       {"adp1050"},
+       { .name = "adp1050", .driver_data = (kernel_ulong_t)&adp1050_info },
+       { .name = "adp1051", .driver_data = (kernel_ulong_t)&adp1051_info },
+       { .name = "adp1055", .driver_data = (kernel_ulong_t)&adp1055_info },
+       { .name = "ltp8800", .driver_data = (kernel_ulong_t)&ltp8800_info },
        {}
 };
 MODULE_DEVICE_TABLE(i2c, adp1050_id);
 
 static const struct of_device_id adp1050_of_match[] = {
-       { .compatible = "adi,adp1050"},
+       { .compatible = "adi,adp1050", .data = &adp1050_info },
+       { .compatible = "adi,adp1051", .data = &adp1051_info },
+       { .compatible = "adi,adp1055", .data = &adp1055_info },
+       { .compatible = "adi,ltp8800", .data = &ltp8800_info },
        {}
 };
 MODULE_DEVICE_TABLE(of, adp1050_of_match);