arm64: dts: qcom: sm8550-qrd: Enable CAMSS and S5K3M5 camera sensor

Enable CAMSS IP and Samsung S5K3M5 camera sensor on SM8550-QRD board.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20251013235500.1883847-3-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index a3f4200a1145d8633944de46dfe3221a13c8ba7c..9af2a4fd02ea5bdc0ea14b246d79b34d49e7e2d3 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -716,6 +716,52 @@
        };
 };
 
+&camss {
+       status = "okay";
+
+       vdda-phy-supply = <&vreg_l1e_0p88>;
+       vdda-pll-supply = <&vreg_l3e_1p2>;
+
+       ports {
+               port@3 {
+                       csiphy3_ep: endpoint {
+                               clock-lanes = <4>;
+                               data-lanes = <0 1 2 3>;
+                               remote-endpoint = <&cam_tele>;
+                       };
+               };
+       };
+};
+
+&cci1 {
+       status = "okay";
+};
+
+&cci1_i2c0 {
+       sensor@10 {
+               compatible = "samsung,s5k3m5";
+               reg = <0x10>;
+               clocks = <&camcc CAM_CC_MCLK3_CLK>;
+               assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>;
+               assigned-clock-rates = <24000000>;
+               reset-gpios = <&tlmm 119 GPIO_ACTIVE_LOW>;
+               pinctrl-0 = <&cam3_default>;
+               pinctrl-names = "default";
+               afvdd-supply = <&vreg_l7n_2p96>;
+               avdd-supply = <&vreg_l4m_2p8>;
+               dovdd-supply = <&vreg_l5n_1p8>;
+               dvdd-supply = <&vreg_l2m_1p056>;
+
+               port {
+                       cam_tele: endpoint {
+                               link-frequencies = /bits/ 64 <602500000>;
+                               data-lanes = <0 1 2 3>;
+                               remote-endpoint = <&csiphy3_ep>;
+                       };
+               };
+       };
+};
+
 &i2c_master_hub_0 {
        status = "okay";
 };