95nvmf: rework parameter handling

Always add the nvmf.discover parameters to /etc/nvme/discovery
when parsing the dracut commandline, and rely on NVMe autodiscovery
when no parameters are given.
And modify the syntax to use a comma ',' as a separator for nvmf.discover
as the semicolon ':' is already used for the FC-NVMe transport address format.

Signed-off-by: Hannes Reinecke <hare@suse.de>

diff --git a/modules.d/95nvmf/module-setup.sh b/modules.d/95nvmf/module-setup.sh
index 418b5e0c2c4a7dc1a8fbae0b05e9ae0c50215734..92400c212a9bf07c8bc6c9f06a9b2875331438d2 100755 (executable)
--- a/modules.d/95nvmf/module-setup.sh
+++ b/modules.d/95nvmf/module-setup.sh
@@ -57,6 +57,31 @@ installkernel() {
 cmdline() {
     local _hostnqn
     local _hostid
+
+    gen_nvmf_cmdline() {
+        local _dev=$1
+        local trtype
+
+        [[ -L "/sys/dev/block/$_dev" ]] || return 0
+        cd -P "/sys/dev/block/$_dev" || return 0
+        if [ -f partition ] ; then
+            cd ..
+        fi
+        for d in device/nvme* ; do
+            [ -L "$d" ] || continue
+            if readlink "$d" | grep -q nvme-fabrics ; then
+                trtype=$(cat "$d"/transport)
+                break
+            fi
+        done
+
+        [ -z "$trtype" ] && return 0
+        nvme list-subsys ${PWD##*/} | while read x dev trtype traddr host_traddr state ana; do
+            [ "$trtype" != "${trtype#NQN}" ] && continue
+            echo -n " nvmf.discover=$trtype,${traddr#traddr=},${host_traddr#host_traddr=}"
+        done
+    }
+
     if [ -f /etc/nvme/hostnqn ] ; then
         _hostnqn=$(cat /etc/nvme/hostnqn)
         echo -n " nvmf.hostnqn=${_hostnqn}"
@@ -65,7 +90,12 @@ cmdline() {
         _hostid=$(cat /etc/nvme/hostid)
         echo -n " nvmf.hostid=${_hostid}"
     fi
-    echo ""
+
+    [[ $hostonly ]] || [[ $mount_needs ]] && {
+        pushd . >/dev/null
+        for_each_host_dev_and_slaves gen_nvmf_cmdline
+        popd >/dev/null
+    }
 }
 
 # called by dracut

diff --git a/modules.d/95nvmf/parse-nvmf-boot-connections.sh b/modules.d/95nvmf/parse-nvmf-boot-connections.sh
index 0ed53a8169b283f9538762d167dc069046277450..3ff731f1bbbec887fd0909c4c19d4a6fc368807e 100755 (executable)
--- a/modules.d/95nvmf/parse-nvmf-boot-connections.sh
+++ b/modules.d/95nvmf/parse-nvmf-boot-connections.sh
@@ -3,14 +3,14 @@
 # Supported formats:
 # nvmf.hostnqn=<hostnqn>
 # nvmf.hostid=<hostid>
-# nvmf.discover=<transport>:<traddr>:<host-traddr>:<trsvcid>
+# nvmf.discover=<transport>,<traddr>,<host-traddr>,<trsvcid>
 #
 # Examples:
 # nvmf.hostnqn=nqn.2014-08.org.nvmexpress:uuid:37303738-3034-584d-5137-333230423843
-# nvmf.discover=rdma:192.168.1.3::4420
-# nvmf.discover=tcp:192.168.1.3::4420
-# nvmf.discover=tcp:192.168.1.3
-# nvmf.discover=fc:auto
+# nvmf.discover=rdma,192.168.1.3,,4420
+# nvmf.discover=tcp,192.168.1.3,,4420
+# nvmf.discover=tcp,192.168.1.3
+# nvmf.discover=fc,nn-0x200400a098d85236:pn-0x201400a098d85236,nn-0x200000109b7db455:pn-0x100000109b7db455
 #
 # Note: FC does autodiscovery, so typically there is no need to
 # specify any discover parameters for FC.
@@ -25,11 +25,6 @@ fi
 
 initqueue --onetime modprobe --all -b -q nvme nvme_tcp nvme_core nvme_fabrics
 
-traddr="none"
-trtype="none"
-hosttraddr="none"
-trsvcid=4420
-
 validate_ip_conn() {
     if ! getargbool 0 rd.neednet ; then
         warn "$trtype transport requires rd.neednet=1"
@@ -59,8 +54,12 @@ validate_ip_conn() {
 }
 
 parse_nvmf_discover() {
+    traddr="none"
+    trtype="none"
+    hosttraddr="none"
+    trsvcid=4420
     OLDIFS="$IFS"
-    IFS=:
+    IFS=,
     set $1
     IFS="$OLDIFS"
 
@@ -101,7 +100,11 @@ parse_nvmf_discover() {
     if [ "$trtype" = "tcp" ]; then
         validate_ip_conn
     fi
-    echo "--transport=$trtype --traddr=$traddr --host-traddr=$hosttraddr --trsvcid=$trsvcid" >> /etc/nvme/discovery.conf
+    if [ "$trtype" = "fc" ] ; then
+        echo "--transport=$trtype --traddr=$traddr --host-traddr=$hosttraddr" >> /etc/nvme/discovery.conf
+    else
+        echo "--transport=$trtype --traddr=$traddr --host-traddr=$hosttraddr --trsvcid=$trsvcid" >> /etc/nvme/discovery.conf
+    fi
 }
 
 nvmf_hostnqn=$(getarg nvmf.hostnqn=)
@@ -122,17 +125,13 @@ done
 [ -f "/etc/nvme/hostid" ] || exit 0
 
 if [ -f "/etc/nvme/discovery.conf" ] ; then
+    /sbin/initqueue --settled --onetime --unique --name nvme-discover /usr/sbin/nvme connect-all
     if [ "$trtype" = "tcp" ] ; then
-        /sbin/initqueue --settled --onetime --unique --name nvme-discover /usr/sbin/nvme connect-all
         > /tmp/net.$ifname.did-setup
-    else
-        /sbin/initqueue --onetime --unique --name nvme-discover /usr/sbin/nvme connect-all
     fi
 else
-    if [ "$trtype" = "tcp" ] ; then
-        /sbin/initqueue --settled --onetime --unique /usr/sbin/nvme connect-all -t tcp -a $traddr -s $trsvcid
-        > /tmp/net.$ifname.did-setup
-    else
-        /sbin/initqueue --finished --unique --name nvme-fc-autoconnect echo 1 > /sys/class/fc/fc_udev_device/nvme_discovery
+    # No nvme command line arguments present, try autodiscovery
+    if [ "$trtype" = "fc" ] ; then
+        /sbin/initqueue --finished --onetime --unique --name nvme-fc-autoconnect echo 1 > /sys/class/fc/fc_udev_device/nvme_discovery
     fi
 fi