# define __bool_true_false_are_defined 1
#endif
@end verbatim
+
+However, since output variables can now contain newlines, it is possible
+to construct an output variable that includes only those headers and
+definitions needed, such as:
+
+@verbatim
+AC_HEADER_STDBOOL
+AC_SUBST(stdbool)
+if test "x$ac_cv_header_stdbool_h" = xyes; then
+ stdbool='
+#include <stdbool.h>
+'
+else
+ if test "x$ac_cv_type__Bool" != xyes; then
+ stdbool='
+#ifdef __cplusplus
+typedef bool _Bool;
+#else
+typedef unsigned char _Bool;
+#endif
+'
+ else
+ stdbool='
+'
+ fi
+ stdbool=$stdbool'dnl
+# define bool _Bool
+# define false 0
+# define true 1
+# define __bool_true_false_are_defined 1
+'
+fi
+@end verbatim
@end defmac
or more @file{Makefile}s). This means that @code{AC_OUTPUT} will
replace instances of @samp{@@@var{variable}@@} in input files with the
value that the shell variable @var{variable} has when @code{AC_OUTPUT}
-is called. This value of @var{variable} should not contain literal
-newlines. (There is currently no portable way to escape literal
-newlines.)
+is called. It is now permissible for the value to contain newlines.
+The substituted value is not rescanned for more output variables;
+occurences of @samp{@@@var{variable}@@} in the value are inserted
+literally into the output file. (Actually, the surrounding @code{@@}s
+are surrounded by @code{|#_!!_#|}, and all occurences of @code{|#_!!_#|}
+are ultimately removed. If by some misfortune, you need a literal
+@code{|#_!!_#|} in your output file, use @code{|#_!|#_!!_#|!_#|}.)
If @var{value} is given, in addition assign it to @var{variable}.
@samp{@@@var{variable}@@} in output files (such as @file{Makefile.in})
with the contents of the file that the shell variable @var{variable}
names when @code{AC_OUTPUT} is called. Set the variable to
-@file{/dev/null} for cases that do not have a file to insert.
+@file{/dev/null} for cases that do not have a file to insert. This
+substitution only occurs when the @samp{@@@var{variable}@@} is on a line
+by itself, optionally surrounded by spaces and tabs. The whole line,
+including the spaces, tabs, and the terminating newline, is replaced.
This macro is useful for inserting @file{Makefile} fragments containing
special dependencies or other @code{make} directives for particular host
m4_define([AC_LIST_FILES])
m4_define([AC_LIST_FILES_COMMANDS])
-
+# _AC_SED_CMD_LIMIT
+# -----------------
+# Evaluate to an m4 number equal to the maximum number of commands to put
+# in any single sed program.
+#
+# Some seds have small command number limits, like on Digital OSF/1 and HP-UX.
+m4_define([_AC_SED_CMD_LIMIT],
+dnl One cannot portably go further than 100 commands because of HP-UX.
+[100])
# _AC_OUTPUT_FILES
# ----------------
# It has to send itself into $CONFIG_STATUS (eg, via here documents).
# Upon exit, no here document shall be opened.
m4_define([_AC_OUTPUT_FILES],
-[cat >>$CONFIG_STATUS <<_ACEOF
-
+[cat >>$CONFIG_STATUS <<\_ACEOF
#
# CONFIG_FILES section.
#
# No need to generate the scripts if there are no CONFIG_FILES.
# This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
- # Protect against being on the right side of a sed subst in config.status.
-dnl Please, pay attention that this sed code depends a lot on the shape
-dnl of the sed commands issued by AC_SUBST. So if you change one, change
-dnl the other too.
-[ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >"\$tmp/subs.sed" <<\\CEOF]
-dnl These here document variables are unquoted when configure runs
-dnl but quoted when config.status runs, so variables are expanded once.
-dnl Insert the sed substitutions of variables.
-m4_ifdef([_AC_SUBST_VARS],
- [AC_FOREACH([AC_Var], m4_defn([_AC_SUBST_VARS]),
-[s,@AC_Var@,$AC_Var,;t t
-])])dnl
+if test -n "$CONFIG_FILES"; then
+
+_ACEOF
+
+m4_pushdef([_AC_SED_CMDS], [])dnl Part of pipeline that does substitutions.
+dnl
+m4_pushdef([_AC_SED_FRAG_NUM], 0)dnl Fragment number.
+m4_pushdef([_AC_SED_CMD_NUM], 2)dnl Num of commands in current frag so far.
+m4_pushdef([_AC_SED_DELIM_NUM], 0)dnl Expected number of delimiters in file.
+m4_pushdef([_AC_SED_FRAG], [])dnl The constant part of the current fragment.
+dnl
m4_ifdef([_AC_SUBST_FILES],
- [AC_FOREACH([AC_Var], m4_defn([_AC_SUBST_FILES]),
-[/@AC_Var@/r $AC_Var
-s,@AC_Var@,,;t t
-])])dnl
-CEOF
+[# Create sed commands to just substitute file output variables.
+
+AC_FOREACH([_AC_Var], m4_defn([_AC_SUBST_FILES]),
+[dnl End fragments at beginning of loop so that last fragment is not ended.
+m4_if(1,m4_eval(_AC_SED_CMD_NUM+4>_AC_SED_CMD_LIMIT),
+[dnl Fragment is full and not the last one, so no need for the final un-escape.
+dnl Increment fragment number.
+m4_define([_AC_SED_FRAG_NUM],m4_incr(_AC_SED_FRAG_NUM))dnl
+dnl Record that this fragment will need to be used.
+m4_define([_AC_SED_CMDS],
+m4_defn([_AC_SED_CMDS])[| sed -f "$tmp/subs-]_AC_SED_FRAG_NUM[.sed" ])dnl
+[cat >>$CONFIG_STATUS <<_ACEOF
+cat >"$tmp/subs-]_AC_SED_FRAG_NUM[.sed" <\CEOF
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+]m4_defn(_AC_SED_FRAG)dnl
+[CEOF
_ACEOF
+]m4_define([_AC_SED_CMD_NUM], 2)m4_define([_AC_SED_FRAG])dnl
+])dnl Last fragment ended.
+m4_define([_AC_SED_CMD_NUM], m4_eval(_AC_SED_CMD_NUM+4))dnl
+m4_define([_AC_SED_FRAG],
+m4_defn([_AC_SED_FRAG])dnl
+[/^[ ]*@]_AC_Var[@[ ]*$/{ r $]_AC_Var[
+d; }
+])dnl
+])dnl
+# Remaining file output variables are in a fragment that also has non-file
+# output varibles.
- cat >>$CONFIG_STATUS <<\_ACEOF
- # Split the substitutions into bite-sized pieces for seds with
- # small command number limits, like on Digital OSF/1 and HP-UX.
-dnl One cannot portably go further than 100 commands because of HP-UX.
-dnl Here, there are 2 cmd per line, and two cmd are added later.
- ac_max_sed_lines=48
- ac_sed_frag=1 # Number of current file.
- ac_beg=1 # First line for current file.
- ac_end=$ac_max_sed_lines # Line after last line for current file.
- ac_more_lines=:
- ac_sed_cmds=
- while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" "$tmp/subs.sed" >"$tmp/subs.frag"
- else
- sed "${ac_end}q" "$tmp/subs.sed" >"$tmp/subs.frag"
- fi
- if test ! -s "$tmp/subs.frag"; then
- ac_more_lines=false
- else
- # The purpose of the label and of the branching condition is to
- # speed up the sed processing (if there are no `@' at all, there
- # is no need to browse any of the substitutions).
- # These are the two extra sed commands mentioned above.
- (echo [':t
- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b'] && cat "$tmp/subs.frag") >"$tmp/subs-$ac_sed_frag.sed"
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f '$tmp/subs-$ac_sed_frag.sed'"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f '$tmp/subs-$ac_sed_frag.sed'"
- fi
- ac_sed_frag=`expr $ac_sed_frag + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_lines`
- fi
- done
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
+])
+dnl
+m4_define([_AC_SED_FRAG],[
+]m4_defn([_AC_SED_FRAG]))dnl
+AC_FOREACH([_AC_Var],
+m4_ifdef([_AC_SUBST_VARS],[m4_defn([_AC_SUBST_VARS]) ])[@END@],
+[m4_if(_AC_SED_DELIM_NUM,0,
+[m4_if(_AC_Var,[@END@],
+[dnl The whole of the last fragment would be the final deletion of `|#_!!_#|'.
+m4_define([_AC_SED_CMDS],m4_defn([_AC_SED_CMDS])[| sed 's/|#_!!_#|//g' ])],
+[
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ cat >conf$$subs.sed <<_ACEOF
+])])dnl
+m4_if(_AC_Var,[ac_delim],
+[dnl Just to be on the safe side, claim that $ac_delim is the empty string.
+m4_define([_AC_SED_FRAG],
+m4_defn([_AC_SED_FRAG])dnl
+[s,ac_delim,|#_!!_#|,g
+])dnl
+m4_define([_AC_SED_CMD_NUM], m4_incr(_AC_SED_CMD_NUM))],
+ _AC_Var,[@END@],
+ [m4_if(1,m4_eval(_AC_SED_CMD_NUM+2<=_AC_SED_CMD_LIMIT),
+ [m4_define([_AC_SED_FRAG], [ end]m4_defn([_AC_SED_FRAG]))])],
+[m4_define([_AC_SED_CMD_NUM], m4_incr(_AC_SED_CMD_NUM))dnl
+m4_define([_AC_SED_DELIM_NUM], m4_incr(_AC_SED_DELIM_NUM))dnl
+_AC_Var!$_AC_Var$ac_delim
+])dnl
+m4_if(_AC_SED_CMD_LIMIT,
+ m4_if(_AC_Var,[@END@],_AC_SED_CMD_LIMIT,_AC_SED_CMD_NUM),
+[_ACEOF
+
+ if test `grep -c "$ac_delim\$" conf$$subs.sed` = _AC_SED_DELIM_NUM; then
+ break
+ elif $ac_last_try; then
+ AC_MSG_ERROR([could not make $CONFIG_STATUS])
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
-fi # test -n "$CONFIG_FILES"
+done
+
+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF//p' conf$$subs.sed | sort -nru | sed 1q`
+ac_eof=`expr 0$ac_eof + 1`
+dnl Increment fragment number.
+m4_define([_AC_SED_FRAG_NUM],m4_incr(_AC_SED_FRAG_NUM))dnl
+dnl Record that this fragment will need to be used.
+m4_define([_AC_SED_CMDS],
+m4_defn([_AC_SED_CMDS])[| sed -f "$tmp/subs-]_AC_SED_FRAG_NUM[.sed" ])dnl
+[cat >>$CONFIG_STATUS <<_ACEOF
+cat >"\$tmp/subs-]_AC_SED_FRAG_NUM[.sed" <<\CEOF$ac_eof
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b]m4_defn([_AC_SED_FRAG])dnl
+[_ACEOF
+sed '
+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
+s/^/s,@/; s/!/@,|#_!!_#|/
+:n
+t n
+s/'"$ac_delim"'$/,g/; t
+s/$/\\/; p
+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
+' >>$CONFIG_STATUS <conf$$subs.sed
+rm -f conf$$subs.sed
+cat >>$CONFIG_STATUS <<_ACEOF
+]m4_if(_AC_Var,[@END@],
+[m4_if(1,m4_eval(_AC_SED_CMD_NUM+2>_AC_SED_CMD_LIMIT),
+[m4_define([_AC_SED_CMDS],m4_defn([_AC_SED_CMDS])[| sed 's/|#_!!_#|//g' ])],
+[[:end
+s/|#_!!_#|//g
+]])])dnl
+CEOF$ac_eof
_ACEOF
+m4_define([_AC_SED_FRAG], [
+])m4_define([_AC_SED_DELIM_NUM], 0)m4_define([_AC_SED_CMD_NUM], 2)dnl
+
+])])dnl
+dnl
+m4_popdef([_AC_SED_FRAG_NUM])dnl
+m4_popdef([_AC_SED_CMD_NUM])dnl
+m4_popdef([_AC_SED_DELIM_NUM])dnl
+m4_popdef([_AC_SED_FRAG])dnl
+dnl
cat >>$CONFIG_STATUS <<\_ACEOF
+fi # test -n "$CONFIG_FILES"
+
for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case $ac_file in
s|@abs_top_builddir@|$ac_abs_top_builddir|;t t
AC_PROVIDE_IFELSE([AC_PROG_INSTALL], [s,@INSTALL@,$ac_INSTALL,;t t
])dnl
-dnl The parens around the eval prevent an "illegal io" in Ultrix sh.
-" $ac_file_inputs | (eval "$ac_sed_cmds") >"$tmp/out"
+" $ac_file_inputs m4_defn([_AC_SED_CMDS])>$tmp/out
+m4_popdef([_AC_SED_CMDS])dnl
rm -f "$tmp/stdin"
dnl This would break Makefile dependencies.
dnl if diff $ac_file "$tmp/out" >/dev/null 2>&1; then
projects / thirdparty / autoconf.git / commitdiff
