* GNUmakefile: Update.
* build-aux/announce-gen: Likewise.
* build-aux/config.guess: Likewise.
* build-aux/config.sub: Likewise.
* build-aux/git-version-gen: Likewise.
* build-aux/texinfo.tex: Likewise.
* build-aux/vc-list-files: Likewise.
* doc/make-stds.texi: Likewise.
* doc/standards.texi: Likewise.
Signed-off-by: Eric Blake <ebb9@byu.net>
+2008-08-06 Eric Blake <ebb9@byu.net>
+
+ Update some files from upstream.
+ * GNUmakefile: Update.
+ * build-aux/announce-gen: Likewise.
+ * build-aux/config.guess: Likewise.
+ * build-aux/config.sub: Likewise.
+ * build-aux/git-version-gen: Likewise.
+ * build-aux/texinfo.tex: Likewise.
+ * build-aux/vc-list-files: Likewise.
+ * doc/make-stds.texi: Likewise.
+ * doc/standards.texi: Likewise.
+
2008-08-04 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Fix AC_CONFIG_FILES([$var]) 2.62 regression.
ifneq ($(_curr-ver),$(VERSION))
ifeq ($(_curr-ver),UNKNOWN)
$(info WARNING: unable to verify if $(VERSION) is correct version)
- else ifneq (,$(_is-install-target))
- # GNU Coding Standards state that 'make install' should not cause
- # recompilation after 'make all'. But as long as changing the version
- # string alters config.h, the cost of having 'make all' always have an
- # up-to-date version is prohibitive. So, as a compromise, we merely
- # warn when installing a version string that is out of date; the user
- # should run 'autoreconf' (or something like 'make distcheck') to
- # fix the version, 'make all' to propagate it, then 'make install'.
- $(info WARNING: version string $(VERSION) is out of date; run autoreconf -f to fix it)
else
- $(info INFO: running autoreconf for new version string: $(_curr-ver))
- _dummy := $(shell cd $(srcdir) && rm -rf autom4te.cache .version \
- && $(_autoreconf))
+ ifneq (,$(_is-install-target))
+ # GNU Coding Standards state that 'make install' should not cause
+ # recompilation after 'make all'. But as long as changing the version
+ # string alters config.h, the cost of having 'make all' always have an
+ # up-to-date version is prohibitive. So, as a compromise, we merely
+ # warn when installing a version string that is out of date; the user
+ # should run 'autoreconf' (or something like 'make distcheck') to
+ # fix the version, 'make all' to propagate it, then 'make install'.
+ $(info WARNING: version string $(VERSION) is out of date; run autoreconf -f to fix it)
+ else
+ $(info INFO: running autoreconf for new version string: $(_curr-ver))
+ _dummy := $(shell cd $(srcdir) && rm -rf autom4te.cache .version \
+ && $(_autoreconf))
+ endif
endif
endif
endif
#!/usr/bin/perl -w
# Generate a release announcement message.
-my $VERSION = '2008-02-08 10:34'; # UTC
+my $VERSION = '2008-06-02 08:18'; # UTC
# The definition above must lie within the first 8 lines in order
# for the Emacs time-stamp write hook (at end) to update it.
# If you change this file with Emacs, please let the write hook
If that command fails because you don't have the required public key,
then run this command to import it:
- gpg --keyserver wwwkeys.pgp.net --recv-keys $gpg_key_id
+ gpg --keyserver keys.gnupg.net --recv-keys $gpg_key_id
and rerun the \`gpg --verify' command.
EOF
# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
# Free Software Foundation, Inc.
-timestamp='2008-03-12'
+timestamp='2008-04-14'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
a.out-i386-linux)
echo "${UNAME_MACHINE}-pc-linux-gnuaout"
exit ;;
- coff-i386)
- echo "${UNAME_MACHINE}-pc-linux-gnucoff"
- exit ;;
"")
# Either a pre-BFD a.out linker (linux-gnuoldld) or
# one that does not give us useful --help.
# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
# Free Software Foundation, Inc.
-timestamp='2008-03-26'
+timestamp='2008-06-16'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
basic_machine=c90-cray
os=-unicos
;;
+ cegcc)
+ basic_machine=arm-unknown
+ os=-cegcc
+ ;;
convex-c1)
basic_machine=c1-convex
os=-bsd
basic_machine=m88k-motorola
os=-sysv3
;;
+ dicos)
+ basic_machine=i686-pc
+ os=-dicos
+ ;;
djgpp)
basic_machine=i586-pc
os=-msdosdjgpp
| -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* \
+ | -chorusos* | -chorusrdb* | -cegcc* \
| -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
| -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
| -uxpv* | -beos* | -mpeix* | -udk* \
-zvmoe)
os=-zvmoe
;;
+ -dicos*)
+ os=-dicos
+ ;;
-none)
;;
*)
#!/bin/sh
# Print a version string.
-scriptversion=2008-04-03.22
+scriptversion=2008-04-08.07
# Copyright (C) 2007-2008 Free Software Foundation
#
then
: # use $v
elif test -d .git \
- && v=`git describe --abbrev=4 HEAD 2>/dev/null` \
+ && v=`git describe --abbrev=4 --match='v*' HEAD 2>/dev/null \
+ || git describe --abbrev=4 HEAD 2>/dev/null` \
&& case $v in
v[0-9]*) ;;
*) (exit 1) ;;
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2008-03-31.10}
+\def\texinfoversion{2008-04-18.10}
%
% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
\def\jmacro{j}
\def\dotless#1{%
\def\temp{#1}%
- \ifx\temp\imacro \ptexi
- \else\ifx\temp\jmacro \j
+ \ifx\temp\imacro \ifmmode\imath \else\ptexi \fi
+ \else\ifx\temp\jmacro \ifmmode\jmath \else\j \fi
\else \errmessage{@dotless can be used only with i or j}%
\fi\fi
}
\pushthisfilestack
\def\thisfile{#1}%
{%
- \makevalueexpandable % we want to expand any @value in FILE.
+ \makevalueexpandable % we want to expand any @value in FILE.
\turnoffactive % and allow special characters in the expansion
\edef\temp{\noexpand\input #1 }%
%
\mathunderscore
\let\\ = \mathbackslash
\mathactive
+ % make the texinfo accent commands work in math mode
+ \let\"=\ddot
+ \let\'=\acute
+ \let\==\bar
+ \let\^=\hat
+ \let\`=\grave
+ \let\u=\breve
+ \let\v=\check
+ \let\~=\tilde
+ \let\dotaccent=\dot
$\finishmath
}
\def\finishmath#1{#1$\endgroup} % Close the group opened by \tex.
}
}
-% @bullet and @minus need the same treatment as @math, just above.
+% Some math mode symbols.
\def\bullet{$\ptexbullet$}
-\def\minus{$-$}
+\def\geq{\ifmmode \ge\else $\ge$\fi}
+\def\leq{\ifmmode \le\else $\le$\fi}
+\def\minus{\ifmmode -\else $-$\fi}
% @dots{} outputs an ellipsis using the current font.
% We do .5em per period so that it has the same spacing in the cm
# List version-controlled file names.
# Print a version string.
-scriptversion=2008-04-03.17
+scriptversion=2008-07-11.19
# Copyright (C) 2006-2008 Free Software Foundation, Inc.
eval exec git ls-files '"$dir"' $postprocess
elif test -d .hg; then
eval exec hg locate '"$dir/*"' $postprocess
+elif test -d .bzr; then
+ test "$postprocess" = '' && postprocess="| sed 's|^\./||'"
+ eval exec bzr ls --versioned '"$dir"' $postprocess
elif test -d CVS; then
+ test "$postprocess" = '' && postprocess="| sed 's|^\./||'"
if test -x build-aux/cvsu; then
eval build-aux/cvsu --find --types=AFGM '"$dir"' $postprocess
elif (cvsu --help) >/dev/null 2>&1; then
eval awk -F/ \''{ \
if (!$1 && $3 !~ /^-/) { \
f=FILENAME; \
- sub(/CVS\/Entries/, "", f); \
+ if (f ~ /CVS\/Entries$/) \
+ f = substr(f, 0, length(f)-11); \
print f $2; \
}}'\'' \
- $(find ${*-*} -name Entries -print) /dev/null' $postprocess
+ `find "$dir" -name Entries -print` /dev/null' $postprocess
fi
else
echo "$0: Failed to determine type of version control used in `pwd`" 1>&2
Compress the tar file with @code{gzip}. For example, the actual
distribution file for GCC version 1.40 is called @file{gcc-1.40.tar.gz}.
+It is ok to support other free compression formats as well, such as
+@code{bzip2} and @code{lzma}.
The @code{dist} target should explicitly depend on all non-source files
that are in the distribution, to make sure they are up to date in the
@setfilename standards.info
@settitle GNU Coding Standards
@c This date is automagically updated when you save this file:
-@set lastupdate February 23, 2008
+@set lastupdate July 25, 2008
@c %**end of header
@dircategory GNU organization
is written in that language, too. The Emacs editor pioneered this
technique.
-@cindex GUILE
-The standard extensibility interpreter for GNU software is GUILE
+@cindex Guile
+@cindex GNOME and Guile
+The standard extensibility interpreter for GNU software is Guile
(@uref{http://www.gnu.org/@/software/@/guile/}), which implements the
-language Scheme (an especially clean and simple dialect of Lisp). We
-don't reject programs written in other ``scripting languages'' such as
-Perl and Python, but using GUILE is very important for the overall
-consistency of the GNU system.
+language Scheme (an especially clean and simple dialect of Lisp).
+Guile also includes bindings for GTK+/GNOME, making it practical to
+write modern GUI functionality within Guile. We don't reject programs
+written in other ``scripting languages'' such as Perl and Python, but
+using Guile is very important for the overall consistency of the GNU
+system.
+
@node Compatibility
@section Compatibility with Other Implementations
GNU GPL with the exception for Guile; for example, GPLv3+/Guile means
the GNU GPL version 3 or later, with the extra exception for Guile.
+@item GPL/Ada
GNU GPL with the exception for Ada.
@item Apache
@samp{-v} in @code{gawk}.
@item assume-new
-@samp{-W} in Make.
+@samp{-W} in @code{make}.
@item assume-old
-@samp{-o} in Make.
+@samp{-o} in @code{make}.
@item auto-check
@samp{-a} in @code{recode}.
@samp{-d} in @code{touch}.
@item debug
-@samp{-d} in Make and @code{m4};
+@samp{-d} in @code{make} and @code{m4};
@samp{-t} in Bison.
@item define
@samp{-X} in @code{strip}.
@item dry-run
-@samp{-n} in Make.
+@samp{-n} in @code{make}.
@item ed
@samp{-e} in @code{diff}.
@samp{-N} in @code{diff}.
@item environment-overrides
-@samp{-e} in Make.
+@samp{-e} in @code{make}.
@item eof
@samp{-e} in @code{xargs}.
@samp{-E} in @code{m4}.
@item file
-@samp{-f} in @code{info}, @code{gawk}, Make, @code{mt}, and @code{tar};
-@samp{-n} in @code{sed};
-@samp{-r} in @code{touch}.
+@samp{-f} in @code{gawk}, @code{info}, @code{make}, @code{mt},
+@code{sed}, and @code{tar}.
@item field-separator
@samp{-F} in @code{gawk}.
@samp{-i} in @code{diff} and @code{wdiff}.
@item ignore-errors
-@samp{-i} in Make.
+@samp{-i} in @code{make}.
@item ignore-file
@samp{-i} in @code{ptx}.
@samp{-I} in @code{m4}.
@item include-dir
-@samp{-I} in Make.
+@samp{-I} in @code{make}.
@item incremental
@samp{-G} in @code{tar}.
Used in @code{date}
@item jobs
-@samp{-j} in Make.
+@samp{-j} in @code{make}.
@item just-print
-@samp{-n} in Make.
+@samp{-n} in @code{make}.
@item keep-going
-@samp{-k} in Make.
+@samp{-k} in @code{make}.
@item keep-files
@samp{-k} in @code{csplit}.
@samp{-N} in @code{ls}.
@item load-average
-@samp{-l} in Make.
+@samp{-l} in @code{make}.
@item login
Used in @code{su}.
@samp{-d} in @code{cpio}.
@item makefile
-@samp{-f} in Make.
+@samp{-f} in @code{make}.
@item mapped
Used in GDB.
@samp{-l} in @code{xargs}.
@item max-load
-@samp{-l} in Make.
+@samp{-l} in @code{make}.
@item max-procs
@samp{-P} in @code{xargs}.
@samp{-a} in @code{shar}.
@item new-file
-@samp{-W} in Make.
+@samp{-W} in @code{make}.
@item no-builtin-rules
-@samp{-r} in Make.
+@samp{-r} in @code{make}.
@item no-character-count
@samp{-w} in @code{shar}.
@samp{-2} in @code{wdiff}.
@item no-keep-going
-@samp{-S} in Make.
+@samp{-S} in @code{make}.
@item no-lines
@samp{-l} in Bison.
@samp{-o} in @code{tar}.
@item old-file
-@samp{-o} in Make.
+@samp{-o} in @code{make}.
@item one-file-system
@samp{-l} in @code{tar}, @code{cp}, and @code{du}.
@samp{-L} in @code{cmp}.
@item print-data-base
-@samp{-p} in Make.
+@samp{-p} in @code{make}.
@item print-directory
-@samp{-w} in Make.
+@samp{-w} in @code{make}.
@item print-file-name
@samp{-o} in @code{nm}.
@samp{-X} in @code{shar}.
@item question
-@samp{-q} in Make.
+@samp{-q} in @code{make}.
@item quiet
Used in many programs to inhibit the usual output. Every
Used in GDB.
@item recon
-@samp{-n} in Make.
+@samp{-n} in @code{make}.
@item record-number
@samp{-R} in @code{tar}.
Used in @code{chgrp}, @code{chown}, @code{cp}, @code{ls}, @code{diff},
and @code{rm}.
-@item reference-limit
-Used in @code{makeinfo}.
+@item reference
+@samp{-r} in @code{touch}.
@item references
@samp{-r} in @code{ptx}.
@samp{-S} in @code{shar}.
@item stop
-@samp{-S} in Make.
+@samp{-S} in @code{make}.
@item strict
@samp{-s} in @code{recode}.
@samp{-c} in @code{du}.
@item touch
-@samp{-t} in Make, @code{ranlib}, and @code{recode}.
+@samp{-t} in @code{make}, @code{ranlib}, and @code{recode}.
@item trace
@samp{-t} in @code{m4}.
@samp{-V} in @code{tar}.
@item what-if
-@samp{-W} in Make.
+@samp{-W} in @code{make}.
@item whole-size-limit
@samp{-l} in @code{shar}.
Each GNU distribution should come with a shell script named
@code{configure}. This script is given arguments which describe the
kind of machine and system you want to compile the program for.
-
The @code{configure} script must record the configuration options so
that they affect compilation.
-One way to do this is to make a link from a standard name such as
-@file{config.h} to the proper configuration file for the chosen system.
-If you use this technique, the distribution should @emph{not} contain a
-file named @file{config.h}. This is so that people won't be able to
-build the program without configuring it first.
+The description here is the specification of the interface for the
+@code{configure} script in GNU packages. Many packages implement it
+using GNU Autoconf (@pxref{Top,, Introduction, autoconf, Autoconf})
+and/or GNU Automake (@pxref{Top,, Introduction, automake, Automake}),
+but you do not have to use these tools. You can implement it any way
+you like; for instance, by making @code{configure} be a wrapper around
+a completely different configuration system.
+
+Another way for the @code{configure} script to operate is to make a
+link from a standard name such as @file{config.h} to the proper
+configuration file for the chosen system. If you use this technique,
+the distribution should @emph{not} contain a file named
+@file{config.h}. This is so that people won't be able to build the
+program without configuring it first.
Another thing that @code{configure} can do is to edit the Makefile. If
you do this, the distribution should @emph{not} contain a file named
projects / thirdparty / autoconf.git / commitdiff
