])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library, adds --enable-ltdl-convenience to
-# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'. Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
+# the libltdl convenience library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-convenience to the
+# configure arguments. Note that LIBLTDL and INCLTDL are not
+# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not
+# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed
+# with '${top_builddir}/' and INCLTDL will be prefixed with
+# '${top_srcdir}/' (note the single quotes!). If your package is not
+# flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
esac
- LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
- INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+ INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
])
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library, and adds --enable-ltdl-install to
-# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'. Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
+# the libltdl installable library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-install to the configure
+# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
+# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed
+# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will
+# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
+# with '${top_srcdir}/' (note the single quotes!). If your package is
+# not flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_CHECK_LIB(ltdl, main,
])
if test x"$enable_ltdl_install" = x"yes"; then
ac_configure_args="$ac_configure_args --enable-ltdl-install"
- LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
- INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+ INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
else
ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
LIBLTDL="-lltdl"
fi
])
+#serial 2
+
+dnl From Paul Eggert.
+
+AC_DEFUN(jm_AC_TYPE_UNSIGNED_LONG_LONG,
+[
+ AC_CACHE_CHECK([for unsigned long long], ac_cv_type_unsigned_long_long,
+ [AC_TRY_LINK([unsigned long long ull = 1; int i = 63;],
+ [unsigned long long ullmax = (unsigned long long) -1;
+ return ull << i | ull >> i | ullmax / ull | ullmax % ull;],
+ ac_cv_type_unsigned_long_long=yes,
+ ac_cv_type_unsigned_long_long=no)])
+ if test $ac_cv_type_unsigned_long_long = yes; then
+ AC_DEFINE(HAVE_UNSIGNED_LONG_LONG, 1,
+ [Define if you have the unsigned long long type.])
+ fi
+])
+
# From Ulrich Drepper.
# serial 1
fi
])
+#serial 5
+
+dnl From Paul Eggert.
+
+AC_PREREQ(2.13)
+
+# Define uintmax_t to `unsigned long' or `unsigned long long'
+# if <inttypes.h> does not exist.
+
+AC_DEFUN(jm_AC_TYPE_UINTMAX_T,
+[
+ AC_REQUIRE([jm_AC_HEADER_INTTYPES_H])
+ if test $jm_ac_cv_header_inttypes_h = no; then
+ AC_REQUIRE([jm_AC_TYPE_UNSIGNED_LONG_LONG])
+ test $ac_cv_type_unsigned_long_long = yes \
+ && ac_type='unsigned long long' \
+ || ac_type='unsigned long'
+ AC_DEFINE_UNQUOTED(uintmax_t, $ac_type,
+ [Define to unsigned long or unsigned long long
+ if <inttypes.h> doesn't define.])
+ fi
+])
+
+#serial 3
+
+dnl From Paul Eggert.
+
+# Define HAVE_INTTYPES_H if <inttypes.h> exists,
+# doesn't clash with <sys/types.h>, and declares uintmax_t.
+
+AC_DEFUN(jm_AC_HEADER_INTTYPES_H,
+[
+ AC_CACHE_CHECK([for inttypes.h], jm_ac_cv_header_inttypes_h,
+ [AC_TRY_COMPILE(
+ [#include <sys/types.h>
+#include <inttypes.h>],
+ [uintmax_t i = (uintmax_t) -1;],
+ jm_ac_cv_header_inttypes_h=yes,
+ jm_ac_cv_header_inttypes_h=no)])
+ if test $jm_ac_cv_header_inttypes_h = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H, 1,
+[Define if <inttypes.h> exists, doesn't clash with <sys/types.h>,
+ and declares uintmax_t. ])
+ fi
+])
+
dnl From Jim Meyering. Use this if you use the GNU error.[ch].
dnl FIXME: Migrate into libit
AC_SUBST(LIBOBJS)dnl
])
+#serial 2
+
+# Check for setlocale declaration.
+
+AC_DEFUN(gt_SETLOCALE,[
+AC_CHECK_HEADERS([locale.h])
+AC_MSG_CHECKING([for setlocale declaration])
+AC_CACHE_VAL(gt_cv_proto_setlocale, [
+AC_TRY_COMPILE([
+#include <stdlib.h>
+#include <locale.h>
+#if defined(__STDC__) || defined(__cplusplus)
+char* setlocale (int category, char* locale);
+#else
+char* setlocale();
+#endif
+], [], gt_cv_proto_setlocale_arg1="", gt_cv_proto_setlocale_arg1="const")
+gt_cv_proto_setlocale="extern char* setlocale (int, $gt_cv_proto_setlocale_arg1 char*);"])
+gt_cv_proto_setlocale=`echo "[$]gt_cv_proto_setlocale" | tr -s ' ' | sed -e 's/( /(/'`
+AC_MSG_RESULT([$]{ac_t:-
+ }[$]gt_cv_proto_setlocale)
+AC_DEFINE_UNQUOTED(SETLOCALE_CONST,$gt_cv_proto_setlocale_arg1,
+ [Define as const if the declaration of setlocale() needs const.])
+])
+
# Macro to add for using GNU gettext.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
-# serial 7
+# serial 8
-dnl Usage: AM_WITH_NLS([SYMBOL], [LIBDIR], [INCDIR]).
-dnl If SYMBOL is specified and is `no-catgets', then the catgets checks
-dnl will be disabled. You must specify this if your program uses
-dnl any of the ngettext/dngettext/dcngettext/bind_textdomain_codeset
-dnl functions, which are not supported by the catgets backend.
+dnl Usage: AM_WITH_NLS([SYMBOL], [LIBDIR]).
+dnl If SYMBOL is specified and is 'use-libtool', then a libtool library
+dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static,
+dnl depending on --{enable,disable}-{shared,static} and on the presence of
+dnl AM_DISABLE_SHARED). Otherwise, a static library
+dnl $(top_builddir)/intl/libintl.a will be created.
dnl LIBDIR is used to find the intl libraries. If empty,
dnl the value `$(top_builddir)/intl/' is used.
-dnl INCDIR is used to find the include files. If empty,
-dnl the value `intl' is used.
dnl
-dnl The result of the configuration is one of five cases:
+dnl The result of the configuration is one of three cases:
dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
dnl and used.
-dnl Catalog format: GNU --> DATADIRNAME = share
+dnl Catalog format: GNU --> install in $(datadir)
dnl Catalog extension: .mo after installation, .gmo in source tree
dnl 2) GNU gettext has been found in the system's C library.
-dnl Catalog format: GNU --> DATADIRNAME = share
+dnl Catalog format: GNU --> install in $(datadir)
dnl Catalog extension: .mo after installation, .gmo in source tree
-dnl 3) An X/Open gettext has been found in the system's C library.
-dnl Catalog format: Platform dependent --> DATADIRNAME = lib
-dnl Catalog extension: .mo
-dnl 4) A catgets has been found in the system's C library.
-dnl Catalog format: Platform dependent --> DATADIRNAME = lib
-dnl Catalog extension: .cat
-dnl 5) No internationalization, always use English msgid.
+dnl 3) No internationalization, always use English msgid.
dnl Catalog format: none
dnl Catalog extension: none
+dnl The use of .gmo is historical (it was needed to avoid overwriting the
+dnl GNU format catalogs when building on a platform with an X/Open gettext),
+dnl but we keep it in order not to force irrelevant filename changes on the
+dnl maintainers.
dnl
AC_DEFUN(AM_WITH_NLS,
[AC_MSG_CHECKING([whether NLS is requested])
AC_MSG_RESULT($USE_NLS)
AC_SUBST(USE_NLS)
+ BUILD_INCLUDED_LIBINTL=no
USE_INCLUDED_LIBINTL=no
dnl If we use NLS figure out what method
if test "$USE_NLS" = "yes"; then
- AC_DEFINE(ENABLE_NLS)
+ AC_DEFINE(ENABLE_NLS, 1,
+ [Define to 1 if translation of program messages to the user's native language
+ is requested.])
AC_MSG_CHECKING([whether included gettext is requested])
AC_ARG_WITH(included-gettext,
[ --with-included-gettext use the GNU gettext library included here],
nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
dnl User does not insist on using GNU NLS library. Figure out what
- dnl to use. If gettext or catgets are available (in this order) we
- dnl use this. Else we have to fall back to GNU NLS library.
- dnl catgets is only used if permitted by option --with-catgets.
- nls_cv_header_intl=
- nls_cv_header_libgt=
+ dnl to use. If GNU gettext is available we use this. Else we have
+ dnl to fall back to GNU NLS library.
CATOBJEXT=NONE
AC_CHECK_HEADER(libintl.h,
- [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
- [AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
- gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
-
- if test "$gt_cv_func_gettext_libc" != "yes"; then
- AC_CHECK_LIB(intl, bindtextdomain,
- [AC_CACHE_CHECK([for gettext in libintl],
- gt_cv_func_gettext_libintl,
- [AC_CHECK_LIB(intl, gettext,
- gt_cv_func_gettext_libintl=yes,
- gt_cv_func_gettext_libintl=no)],
- gt_cv_func_gettext_libintl=no)])
+ [AC_CACHE_CHECK([for GNU gettext in libc], gt_cv_func_gnugettext_libc,
+ [AC_TRY_LINK([#include <libintl.h>
+extern int _nl_msg_cat_cntr;],
+ [bindtextdomain ("", "");
+return (int) gettext ("") + _nl_msg_cat_cntr],
+ gt_cv_func_gnugettext_libc=yes,
+ gt_cv_func_gnugettext_libc=no)])
+
+ if test "$gt_cv_func_gnugettext_libc" != "yes"; then
+ AC_CACHE_CHECK([for GNU gettext in libintl],
+ gt_cv_func_gnugettext_libintl,
+ [gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -lintl"
+ AC_TRY_LINK([#include <libintl.h>
+extern int _nl_msg_cat_cntr;],
+ [bindtextdomain ("", "");
+return (int) gettext ("") + _nl_msg_cat_cntr],
+ gt_cv_func_gnugettext_libintl=yes,
+ gt_cv_func_gnugettext_libintl=no)
+ LIBS="$gt_save_LIBS"])
fi
- if test "$gt_cv_func_gettext_libc" = "yes" \
- || test "$gt_cv_func_gettext_libintl" = "yes"; then
- AC_DEFINE(HAVE_GETTEXT)
+ if test "$gt_cv_func_gnugettext_libc" = "yes" \
+ || test "$gt_cv_func_gnugettext_libintl" = "yes"; then
+ AC_DEFINE(HAVE_GETTEXT, 1,
+ [Define if the GNU gettext() function is already present or preinstalled.])
AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
if test "$MSGFMT" != "no"; then
AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
- AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
- return _nl_msg_cat_cntr],
- [CATOBJEXT=.gmo
- DATADIRNAME=share],
- [CATOBJEXT=.mo
- DATADIRNAME=lib])
- INSTOBJEXT=.mo
+ CATOBJEXT=.gmo
+ fi
+ if test "$gt_cv_func_gnugettext_libintl" = "yes"; then
+ INTLLIBS="-lintl"
fi
fi
])
-ifelse([$1], no-catgets, ,[
- if test "$CATOBJEXT" = "NONE"; then
- AC_MSG_CHECKING([whether catgets can be used])
- AC_ARG_WITH(catgets,
- [ --with-catgets use catgets functions if available],
- nls_cv_use_catgets=$withval, nls_cv_use_catgets=no)
- AC_MSG_RESULT($nls_cv_use_catgets)
-
- if test "$nls_cv_use_catgets" = "yes"; then
- dnl No gettext in C library. Try catgets next.
- AC_CHECK_LIB(i, main)
- AC_CHECK_FUNC(catgets,
- [AC_DEFINE(HAVE_CATGETS)
- INTLOBJS="\$(CATOBJS)"
- AC_PATH_PROG(GENCAT, gencat, no)dnl
- if test "$GENCAT" != "no"; then
- AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
- if test "$GMSGFMT" = "no"; then
- AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)
- fi
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
- USE_INCLUDED_LIBINTL=yes
- CATOBJEXT=.cat
- INSTOBJEXT=.cat
- DATADIRNAME=lib
- INTLDEPS='ifelse([$2],[],$(top_builddir)/intl/libintl.a,[$2])'
- INTLLIBS=$INTLDEPS
- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
- nls_cv_header_intl=ifelse([$3],[],intl,[$3])/libintl.h
- nls_cv_header_libgt=ifelse([$3],[],intl,[$3])/libgettext.h
- fi])
- fi
- fi
-])
-
if test "$CATOBJEXT" = "NONE"; then
- dnl Neither gettext nor catgets in included in the C library.
+ dnl GNU gettext is not found in the C library.
dnl Fall back on GNU gettext library.
nls_cv_use_gnu_gettext=yes
fi
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
AC_SUBST(MSGFMT)
+ BUILD_INCLUDED_LIBINTL=yes
USE_INCLUDED_LIBINTL=yes
CATOBJEXT=.gmo
- INSTOBJEXT=.mo
- DATADIRNAME=share
- INTLDEPS='ifelse([$2],[],$(top_builddir)/intl/libintl.a,[$2])'
- INTLLIBS=$INTLDEPS
- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
- nls_cv_header_intl=ifelse([$3],[],intl,[$3])/libintl.h
- nls_cv_header_libgt=ifelse([$3],[],intl,[$3])/libgettext.h
+ INTLLIBS='ifelse([$2],[],$(top_builddir)/intl,[$2])/libintl.ifelse([$1], use-libtool, [l], [])a'
+ LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
fi
dnl Test whether we really found GNU xgettext.
# We need to process the po/ directory.
POSUB=po
- else
- DATADIRNAME=share
- nls_cv_header_intl=ifelse([$3],[],intl,[$3])/libintl.h
- nls_cv_header_libgt=ifelse([$3],[],intl,[$3])/libgettext.h
fi
- AC_LINK_FILES($nls_cv_header_libgt, $nls_cv_header_intl)
AC_OUTPUT_COMMANDS(
- [case "$CONFIG_FILES" in *po/Makefile.in*)
+ [case " $CONFIG_FILES " in *" po/Makefile.in "*)
sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
esac])
- # If this is used in GNU gettext we have to set USE_NLS to `yes'
- # because some of the sources are only built for this goal.
+ # If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
+ # to 'yes' because some of the testsuite requires it.
if test "$PACKAGE" = gettext; then
- USE_NLS=yes
- USE_INCLUDED_LIBINTL=yes
+ BUILD_INCLUDED_LIBINTL=yes
fi
dnl These rules are solely for the distribution goal. While doing this
done
dnl Make all variables we use known to autoconf.
+ AC_SUBST(BUILD_INCLUDED_LIBINTL)
AC_SUBST(USE_INCLUDED_LIBINTL)
AC_SUBST(CATALOGS)
AC_SUBST(CATOBJEXT)
- AC_SUBST(DATADIRNAME)
AC_SUBST(GMOFILES)
- AC_SUBST(INSTOBJEXT)
- AC_SUBST(INTLDEPS)
AC_SUBST(INTLLIBS)
AC_SUBST(INTLOBJS)
AC_SUBST(POFILES)
AC_SUBST(POSUB)
+
+ dnl For backward compatibility. Some configure.ins may be using this.
+ nls_cv_header_intl=
+ nls_cv_header_libgt=
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ DATADIRNAME=share
+ AC_SUBST(DATADIRNAME)
])
dnl Usage: Just like AM_WITH_NLS, which see.
else
AC_MSG_CHECKING(for catalogs to be installed)
NEW_LINGUAS=
- for lang in ${LINGUAS=$ALL_LINGUAS}; do
- case "$ALL_LINGUAS" in
- *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
- esac
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ for desiredlang in ${LINGUAS-$ALL_LINGUAS}; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ NEW_LINGUAS="$NEW_LINGUAS $presentlang"
+ fi
done
LINGUAS=$NEW_LINGUAS
AC_MSG_RESULT($LINGUAS)
fi
fi
- dnl The reference to <locale.h> in the installed <libintl.h> file
- dnl must be resolved because we cannot expect the users of this
- dnl to define HAVE_LOCALE_H.
- if test $ac_cv_header_locale_h = yes; then
- INCLUDE_LOCALE_H="#include <locale.h>"
- else
- INCLUDE_LOCALE_H="\
-/* The system does not provide the header <locale.h>. Take care yourself. */"
- fi
- AC_SUBST(INCLUDE_LOCALE_H)
-
- test -d intl || mkdir intl
- if test "$CATOBJEXT" = ".cat"; then
- dnl Only the X/Open catalog format is supported.
- dnl Transform the SED scripts while copying because some dumb SEDs
- dnl cannot handle comments.
- sed -e '/^#/d' $srcdir/intl/po2msg.sin > intl/po2msg.sed
- fi
- dnl po2tbl.sed is always needed.
- sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
- $srcdir/intl/po2tbl.sin > intl/po2tbl.sed
-
- dnl In the intl/Makefile.in we have a special dependency which makes
- dnl only sense for gettext. We comment this out for non-gettext
- dnl packages.
- if test "$PACKAGE" = "gettext"; then
- GT_NO="#NO#"
- GT_YES=
- else
- GT_NO=
- GT_YES="#YES#"
- fi
- AC_SUBST(GT_NO)
- AC_SUBST(GT_YES)
-
dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
dnl find the mkinstalldirs script in another subdir but $(top_srcdir).
dnl Try to locate is.
fi
AC_SUBST(MKINSTALLDIRS)
- dnl *** For now the libtool support in intl/Makefile is not for real.
- l=
- AC_SUBST(l)
+ dnl Enable libtool support if the surrounding package wishes it.
+ INTL_LIBTOOL_SUFFIX_PREFIX=ifelse([$1], use-libtool, [l], [])
+ AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX)
dnl Generate list of files to be processed by xgettext which will
dnl be included in po/Makefile. But only do this if the po directory
])
if test "$am_cv_func_iconv" = yes; then
AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.])
+ AC_MSG_CHECKING([for iconv declaration])
+ AC_CACHE_VAL(am_cv_proto_iconv, [
+ AC_TRY_COMPILE([
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t* outbytesleft);
+#else
+size_t iconv();
+#endif
+], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const")
+ am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t* outbytesleft);"])
+ am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+ AC_MSG_RESULT([$]{ac_t:-
+ }[$]am_cv_proto_iconv)
+ AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1,
+ [Define as const if the declaration of iconv() needs const.])
fi
LIBICONV=
if test "$am_cv_lib_iconv" = yes; then
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
-# serial 1
+# serial 2
AC_DEFUN(AM_LC_MESSAGES,
[if test $ac_cv_header_locale_h = yes; then
[AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
if test $am_cv_val_LC_MESSAGES = yes; then
- AC_DEFINE(HAVE_LC_MESSAGES)
+ AC_DEFINE(HAVE_LC_MESSAGES, 1,
+ [Define if your <locale.h> file defines LC_MESSAGES.])
fi
fi])
#! /bin/sh
-# From configure.in Revision: 1.2
+# From configure.in Revision: 1.9
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library, adds --enable-ltdl-convenience to
-# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'. Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
+# the libltdl convenience library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-convenience to the
+# configure arguments. Note that LIBLTDL and INCLTDL are not
+# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not
+# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed
+# with '${top_builddir}/' and INCLTDL will be prefixed with
+# '${top_srcdir}/' (note the single quotes!). If your package is not
+# flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library, and adds --enable-ltdl-install to
-# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'. Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
+# the libltdl installable library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-install to the configure
+# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
+# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed
+# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will
+# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
+# with '${top_srcdir}/' (note the single quotes!). If your package is
+# not flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+#serial 2
+
+
+
+
# From Ulrich Drepper.
# serial 1
+#serial 5
+
+
+
+
+# Define uintmax_t to `unsigned long' or `unsigned long long'
+# if <inttypes.h> does not exist.
+
+
+
+#serial 3
+
+
+# Define HAVE_INTTYPES_H if <inttypes.h> exists,
+# doesn't clash with <sys/types.h>, and declares uintmax_t.
+
+
+
+
+
+
+#serial 2
+
+# Check for setlocale declaration.
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
-# serial 7
+# serial 8
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
-# serial 1
+# serial 2
--disable-nls do not use Native Language Support"
ac_help="$ac_help
--with-included-gettext use the GNU gettext library included here"
-ac_help="$ac_help
- --with-catgets use catgets functions if available"
# Initialize some variables set by options.
# The variables have the same names as the options, with
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:751: checking for a BSD compatible install" >&5
+echo "configure:782: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:804: checking whether build environment is sane" >&5
+echo "configure:835: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:861: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:892: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:907: checking for working aclocal" >&5
+echo "configure:938: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:920: checking for working autoconf" >&5
+echo "configure:951: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:933: checking for working automake" >&5
+echo "configure:964: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:946: checking for working autoheader" >&5
+echo "configure:977: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:959: checking for working makeinfo" >&5
+echo "configure:990: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
-ALL_LINGUAS="da de el es fr ko nl no no@nynorsk pl pt sl sv"
+ALL_LINGUAS="da de el es fr ko nl no no@nynorsk pl pt sl sv tr"
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:981: checking for $ac_word" >&5
+echo "configure:1012: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1011: checking for $ac_word" >&5
+echo "configure:1042: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1062: checking for $ac_word" >&5
+echo "configure:1093: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1094: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1125: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1105 "configure"
+#line 1136 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1110: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1141: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1136: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1167: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1141: checking whether we are using GNU C" >&5
+echo "configure:1172: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1150: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1181: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1169: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1200: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:1276: checking host system type" >&5
+echo "configure:1307: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1297: checking build system type" >&5
+echo "configure:1328: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1317: checking for $ac_word" >&5
+echo "configure:1348: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1356: checking for ld used by GCC" >&5
+echo "configure:1387: checking for ld used by GCC" >&5
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1380: checking for GNU ld" >&5
+echo "configure:1411: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1383: checking for non-GNU ld" >&5
+echo "configure:1414: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1418: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1449: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1434: checking for BSD-compatible nm" >&5
+echo "configure:1465: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""$NM" 1>&6
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1470: checking whether ln -s works" >&5
+echo "configure:1501: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1519 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1520: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 1550 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1551: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1541: checking whether the C compiler needs -belf" >&5
+echo "configure:1572: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1546 "configure"
+#line 1577 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1553: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1584: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
-echo "configure:1656: checking for strerror in -lcposix" >&5
+echo "configure:1687: checking for strerror in -lcposix" >&5
ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcposix $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1664 "configure"
+#line 1695 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
strerror()
; return 0; }
EOF
-if { (eval echo configure:1675: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1706: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1709: checking for a BSD compatible install" >&5
+echo "configure:1740: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1766: checking for $ac_word" >&5
+echo "configure:1797: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1804: checking how to run the C preprocessor" >&5
+echo "configure:1835: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1819 "configure"
+#line 1850 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1825: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1856: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1836 "configure"
+#line 1867 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1842: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1873: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 1853 "configure"
+#line 1884 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1859: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1890: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1884: checking for ANSI C header files" >&5
+echo "configure:1915: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1889 "configure"
+#line 1920 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1897: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1928: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1914 "configure"
+#line 1945 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1932 "configure"
+#line 1963 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 1953 "configure"
+#line 1984 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:1964: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1995: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1991: checking for $ac_hdr" >&5
+echo "configure:2022: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1996 "configure"
+#line 2027 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2001: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2032: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:2029: checking for working const" >&5
+echo "configure:2060: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2034 "configure"
+#line 2065 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2083: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2114: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2104: checking for inline" >&5
+echo "configure:2135: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 2111 "configure"
+#line 2142 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:2118: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2149: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
echo $ac_n "checking whether backslash-a works in strings""... $ac_c" 1>&6
-echo "configure:2145: checking whether backslash-a works in strings" >&5
+echo "configure:2176: checking whether backslash-a works in strings" >&5
if eval "test \"`echo '$''{'ac_cv_c_backslash_a'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2150 "configure"
+#line 2181 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2164: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2195: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_backslash_a=yes
else
fi
+
+ echo $ac_n "checking for unsigned long long""... $ac_c" 1>&6
+echo "configure:2217: checking for unsigned long long" >&5
+if eval "test \"`echo '$''{'ac_cv_type_unsigned_long_long'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2222 "configure"
+#include "confdefs.h"
+unsigned long long ull = 1; int i = 63;
+int main() {
+unsigned long long ullmax = (unsigned long long) -1;
+ return ull << i | ull >> i | ullmax / ull | ullmax % ull;
+; return 0; }
+EOF
+if { (eval echo configure:2230: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_cv_type_unsigned_long_long=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_type_unsigned_long_long=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_type_unsigned_long_long" 1>&6
+ if test $ac_cv_type_unsigned_long_long = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_UNSIGNED_LONG_LONG 1
+EOF
+
+ fi
+
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:2185: checking for off_t" >&5
+echo "configure:2251: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2190 "configure"
+#line 2256 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:2218: checking for size_t" >&5
+echo "configure:2284: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2223 "configure"
+#line 2289 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for ptrdiff_t""... $ac_c" 1>&6
-echo "configure:2251: checking for ptrdiff_t" >&5
+echo "configure:2317: checking for ptrdiff_t" >&5
if eval "test \"`echo '$''{'am_cv_type_ptrdiff_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2256 "configure"
+#line 2322 "configure"
#include "confdefs.h"
#include <stddef.h>
int main() {
ptrdiff_t p
; return 0; }
EOF
-if { (eval echo configure:2263: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2329: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
am_cv_type_ptrdiff_t=yes
else
fi
+ echo $ac_n "checking for inttypes.h""... $ac_c" 1>&6
+echo "configure:2351: checking for inttypes.h" >&5
+if eval "test \"`echo '$''{'jm_ac_cv_header_inttypes_h'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2356 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <inttypes.h>
+int main() {
+uintmax_t i = (uintmax_t) -1;
+; return 0; }
+EOF
+if { (eval echo configure:2364: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ jm_ac_cv_header_inttypes_h=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ jm_ac_cv_header_inttypes_h=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$jm_ac_cv_header_inttypes_h" 1>&6
+ if test $jm_ac_cv_header_inttypes_h = yes; then
+ cat >> confdefs.h <<EOF
+#define HAVE_INTTYPES_H 1
+EOF
+
+ fi
+
+
+
+ if test $jm_ac_cv_header_inttypes_h = no; then
+
+ test $ac_cv_type_unsigned_long_long = yes \
+ && ac_type='unsigned long long' \
+ || ac_type='unsigned long'
+ cat >> confdefs.h <<EOF
+#define uintmax_t $ac_type
+EOF
+
+ fi
+
+
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2287: checking for working alloca.h" >&5
+echo "configure:2401: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2292 "configure"
+#line 2406 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:2299: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2413: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2320: checking for alloca" >&5
+echo "configure:2434: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2325 "configure"
+#line 2439 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:2353: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2467: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2385: checking whether alloca needs Cray hooks" >&5
+echo "configure:2499: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2390 "configure"
+#line 2504 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2415: checking for $ac_func" >&5
+echo "configure:2529: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2420 "configure"
+#line 2534 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2443: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2557: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2470: checking stack direction for C alloca" >&5
+echo "configure:2584: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 2478 "configure"
+#line 2592 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:2497: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
fi
echo $ac_n "checking for vprintf""... $ac_c" 1>&6
-echo "configure:2519: checking for vprintf" >&5
+echo "configure:2633: checking for vprintf" >&5
if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2524 "configure"
+#line 2638 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vprintf(); below. */
; return 0; }
EOF
-if { (eval echo configure:2547: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2661: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vprintf=yes"
else
if test "$ac_cv_func_vprintf" != yes; then
echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
-echo "configure:2571: checking for _doprnt" >&5
+echo "configure:2685: checking for _doprnt" >&5
if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2576 "configure"
+#line 2690 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char _doprnt(); below. */
; return 0; }
EOF
-if { (eval echo configure:2599: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2713: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func__doprnt=yes"
else
for ac_func in getcwd mblen memcpy strchr strerror uname
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2626: checking for $ac_func" >&5
+echo "configure:2740: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2631 "configure"
+#line 2745 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2654: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2768: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
strncasecmp strstr strtoul vasprintf
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2682: checking for $ac_func" >&5
+echo "configure:2796: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2687 "configure"
+#line 2801 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2710: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2824: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in getdelim
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2740: checking for $ac_func" >&5
+echo "configure:2854: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2745 "configure"
+#line 2859 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2768: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2882: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking for parse_printf_format""... $ac_c" 1>&6
-echo "configure:2795: checking for parse_printf_format" >&5
+echo "configure:2909: checking for parse_printf_format" >&5
if eval "test \"`echo '$''{'ac_cv_func_parse_printf_format'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2800 "configure"
+#line 2914 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char parse_printf_format(); below. */
; return 0; }
EOF
-if { (eval echo configure:2823: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2937: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_parse_printf_format=yes"
else
fi
echo $ac_n "checking for error_at_line""... $ac_c" 1>&6
-echo "configure:2853: checking for error_at_line" >&5
+echo "configure:2967: checking for error_at_line" >&5
if eval "test \"`echo '$''{'am_cv_lib_error_at_line'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2858 "configure"
+#line 2972 "configure"
#include "confdefs.h"
int main() {
error_at_line(0, 0, "", 0, "");
; return 0; }
EOF
-if { (eval echo configure:2865: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2979: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_lib_error_at_line=yes
else
fi
+
+for ac_hdr in locale.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:3002: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3007 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:3012: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+echo $ac_n "checking for setlocale declaration""... $ac_c" 1>&6
+echo "configure:3039: checking for setlocale declaration" >&5
+if eval "test \"`echo '$''{'gt_cv_proto_setlocale'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+cat > conftest.$ac_ext <<EOF
+#line 3045 "configure"
+#include "confdefs.h"
+
+#include <stdlib.h>
+#include <locale.h>
+#if defined(__STDC__) || defined(__cplusplus)
+char* setlocale (int category, char* locale);
+#else
+char* setlocale();
+#endif
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:3060: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ gt_cv_proto_setlocale_arg1=""
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ gt_cv_proto_setlocale_arg1="const"
+fi
+rm -f conftest*
+gt_cv_proto_setlocale="extern char* setlocale (int, $gt_cv_proto_setlocale_arg1 char*);"
+fi
+
+gt_cv_proto_setlocale=`echo "$gt_cv_proto_setlocale" | tr -s ' ' | sed -e 's/( /(/'`
+echo "$ac_t""${ac_t:-
+ }$gt_cv_proto_setlocale" 1>&6
+cat >> confdefs.h <<EOF
+#define SETLOCALE_CONST $gt_cv_proto_setlocale_arg1
+EOF
+
+
+
for ac_hdr in unistd.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2887: checking for $ac_hdr" >&5
+echo "configure:3086: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2892 "configure"
+#line 3091 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2897: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3096: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2926: checking for $ac_func" >&5
+echo "configure:3125: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2931 "configure"
+#line 3130 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2954: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3153: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:2979: checking for working mmap" >&5
+echo "configure:3178: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 2987 "configure"
+#line 3186 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:3127: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3326: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3155: checking for $ac_hdr" >&5
+echo "configure:3354: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3160 "configure"
+#line 3359 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3165: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3364: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
__argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3196: checking for $ac_func" >&5
+echo "configure:3395: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3201 "configure"
+#line 3400 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3224: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3423: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for iconv""... $ac_c" 1>&6
-echo "configure:3251: checking for iconv" >&5
+echo "configure:3450: checking for iconv" >&5
if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
am_cv_func_iconv="no, consider installing libiconv"
am_cv_lib_iconv=no
cat > conftest.$ac_ext <<EOF
-#line 3259 "configure"
+#line 3458 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:3269: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3468: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_func_iconv=yes
else
am_save_LIBS="$LIBS"
LIBS="$LIBS -liconv"
cat > conftest.$ac_ext <<EOF
-#line 3281 "configure"
+#line 3480 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:3291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3490: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_lib_iconv=yes
am_cv_func_iconv=yes
if test "$am_cv_func_iconv" = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_ICONV 1
+EOF
+
+ echo $ac_n "checking for iconv declaration""... $ac_c" 1>&6
+echo "configure:3511: checking for iconv declaration" >&5
+ if eval "test \"`echo '$''{'am_cv_proto_iconv'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ cat > conftest.$ac_ext <<EOF
+#line 3517 "configure"
+#include "confdefs.h"
+
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t* outbytesleft);
+#else
+size_t iconv();
+#endif
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:3536: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ am_cv_proto_iconv_arg1=""
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ am_cv_proto_iconv_arg1="const"
+fi
+rm -f conftest*
+ am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t* outbytesleft);"
+fi
+
+ am_cv_proto_iconv=`echo "$am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+ echo "$ac_t""${ac_t:-
+ }$am_cv_proto_iconv" 1>&6
+ cat >> confdefs.h <<EOF
+#define ICONV_CONST $am_cv_proto_iconv_arg1
EOF
fi
echo $ac_n "checking for nl_langinfo and CODESET""... $ac_c" 1>&6
-echo "configure:3320: checking for nl_langinfo and CODESET" >&5
+echo "configure:3565: checking for nl_langinfo and CODESET" >&5
if eval "test \"`echo '$''{'am_cv_langinfo_codeset'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3325 "configure"
+#line 3570 "configure"
#include "confdefs.h"
#include <langinfo.h>
int main() {
char* cs = nl_langinfo(CODESET);
; return 0; }
EOF
-if { (eval echo configure:3332: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3577: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_langinfo_codeset=yes
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:3355: checking for LC_MESSAGES" >&5
+echo "configure:3600: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3360 "configure"
+#line 3605 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:3367: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3612: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:3388: checking whether NLS is requested" >&5
+echo "configure:3633: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
echo "$ac_t""$USE_NLS" 1>&6
+ BUILD_INCLUDED_LIBINTL=no
USE_INCLUDED_LIBINTL=no
if test "$USE_NLS" = "yes"; then
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:3408: checking whether included gettext is requested" >&5
+echo "configure:3654: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
- nls_cv_header_intl=
- nls_cv_header_libgt=
- CATOBJEXT=NONE
+ CATOBJEXT=NONE
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:3427: checking for libintl.h" >&5
+echo "configure:3671: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3432 "configure"
+#line 3676 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3437: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3681: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
- echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:3454: checking for gettext in libc" >&5
-if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
+ echo $ac_n "checking for GNU gettext in libc""... $ac_c" 1>&6
+echo "configure:3698: checking for GNU gettext in libc" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gnugettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3459 "configure"
+#line 3703 "configure"
#include "confdefs.h"
#include <libintl.h>
+extern int _nl_msg_cat_cntr;
int main() {
-return (int) gettext ("")
+bindtextdomain ("", "");
+return (int) gettext ("") + _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:3466: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3712: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- gt_cv_func_gettext_libc=yes
+ gt_cv_func_gnugettext_libc=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- gt_cv_func_gettext_libc=no
+ gt_cv_func_gnugettext_libc=no
fi
rm -f conftest*
fi
-echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
-
- if test "$gt_cv_func_gettext_libc" != "yes"; then
- echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:3482: checking for bindtextdomain in -lintl" >&5
-ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lintl $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 3490 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char bindtextdomain();
-
-int main() {
-bindtextdomain()
-; return 0; }
-EOF
-if { (eval echo configure:3501: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
+echo "$ac_t""$gt_cv_func_gnugettext_libc" 1>&6
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:3517: checking for gettext in libintl" >&5
-if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
+ if test "$gt_cv_func_gnugettext_libc" != "yes"; then
+ echo $ac_n "checking for GNU gettext in libintl""... $ac_c" 1>&6
+echo "configure:3728: checking for GNU gettext in libintl" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gnugettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- echo $ac_n "checking for gettext in -lintl""... $ac_c" 1>&6
-echo "configure:3522: checking for gettext in -lintl" >&5
-ac_lib_var=`echo intl'_'gettext | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lintl $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 3530 "configure"
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -lintl"
+ cat > conftest.$ac_ext <<EOF
+#line 3735 "configure"
#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char gettext();
-
+#include <libintl.h>
+extern int _nl_msg_cat_cntr;
int main() {
-gettext()
+bindtextdomain ("", "");
+return (int) gettext ("") + _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:3541: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3744: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
+ gt_cv_func_gnugettext_libintl=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
+ gt_cv_func_gnugettext_libintl=no
fi
rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- gt_cv_func_gettext_libintl=yes
-else
- echo "$ac_t""no" 1>&6
-gt_cv_func_gettext_libintl=no
-fi
-
-fi
-
-echo "$ac_t""$gt_cv_func_gettext_libintl" 1>&6
-else
- echo "$ac_t""no" 1>&6
+ LIBS="$gt_save_LIBS"
fi
+echo "$ac_t""$gt_cv_func_gnugettext_libintl" 1>&6
fi
- if test "$gt_cv_func_gettext_libc" = "yes" \
- || test "$gt_cv_func_gettext_libintl" = "yes"; then
+ if test "$gt_cv_func_gnugettext_libc" = "yes" \
+ || test "$gt_cv_func_gnugettext_libintl" = "yes"; then
cat >> confdefs.h <<\EOF
#define HAVE_GETTEXT 1
EOF
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3580: checking for $ac_word" >&5
+echo "configure:3769: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3614: checking for $ac_func" >&5
+echo "configure:3803: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3619 "configure"
+#line 3808 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3642: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3831: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3669: checking for $ac_word" >&5
+echo "configure:3858: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3705: checking for $ac_word" >&5
+echo "configure:3894: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- cat > conftest.$ac_ext <<EOF
-#line 3737 "configure"
-#include "confdefs.h"
-
-int main() {
-extern int _nl_msg_cat_cntr;
- return _nl_msg_cat_cntr
-; return 0; }
-EOF
-if { (eval echo configure:3745: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- CATOBJEXT=.gmo
- DATADIRNAME=share
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CATOBJEXT=.mo
- DATADIRNAME=lib
-fi
-rm -f conftest*
- INSTOBJEXT=.mo
+ CATOBJEXT=.gmo
+ fi
+ if test "$gt_cv_func_gnugettext_libintl" = "yes"; then
+ INTLLIBS="-lintl"
fi
fi
fi
-
- if test "$CATOBJEXT" = "NONE"; then
- echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6
-echo "configure:3769: checking whether catgets can be used" >&5
- # Check whether --with-catgets or --without-catgets was given.
-if test "${with_catgets+set}" = set; then
- withval="$with_catgets"
- nls_cv_use_catgets=$withval
-else
- nls_cv_use_catgets=no
-fi
-
- echo "$ac_t""$nls_cv_use_catgets" 1>&6
-
- if test "$nls_cv_use_catgets" = "yes"; then
- echo $ac_n "checking for main in -li""... $ac_c" 1>&6
-echo "configure:3782: checking for main in -li" >&5
-ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-li $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 3790 "configure"
-#include "confdefs.h"
-
-int main() {
-main()
-; return 0; }
-EOF
-if { (eval echo configure:3797: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_lib=HAVE_LIB`echo i | sed -e 's/[^a-zA-Z0-9_]/_/g' \
- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_lib 1
-EOF
-
- LIBS="-li $LIBS"
-
-else
- echo "$ac_t""no" 1>&6
-fi
-
- echo $ac_n "checking for catgets""... $ac_c" 1>&6
-echo "configure:3825: checking for catgets" >&5
-if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 3830 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char catgets(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char catgets();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_catgets) || defined (__stub___catgets)
-choke me
-#else
-catgets();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:3853: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_catgets=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_catgets=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'catgets`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_CATGETS 1
-EOF
-
- INTLOBJS="\$(CATOBJS)"
- # Extract the first word of "gencat", so it can be a program name with args.
-set dummy gencat; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3875: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GENCAT'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$GENCAT" in
- /*)
- ac_cv_path_GENCAT="$GENCAT" # Let the user override the test with a path.
- ;;
- ?:/*)
- ac_cv_path_GENCAT="$GENCAT" # Let the user override the test with a dos path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_path_GENCAT="$ac_dir/$ac_word"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GENCAT" && ac_cv_path_GENCAT="no"
- ;;
-esac
-fi
-GENCAT="$ac_cv_path_GENCAT"
-if test -n "$GENCAT"; then
- echo "$ac_t""$GENCAT" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
- if test "$GENCAT" != "no"; then
- # Extract the first word of "gmsgfmt", so it can be a program name with args.
-set dummy gmsgfmt; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3911: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$GMSGFMT" in
- /*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
- ;;
- ?:/*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="no"
- ;;
-esac
-fi
-GMSGFMT="$ac_cv_path_GMSGFMT"
-if test -n "$GMSGFMT"; then
- echo "$ac_t""$GMSGFMT" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
- if test "$GMSGFMT" = "no"; then
- # Extract the first word of "msgfmt", so it can be a program name with args.
-set dummy msgfmt; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3948: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$GMSGFMT" in
- /*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
- ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
- break
- fi
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="no"
- ;;
-esac
-fi
-GMSGFMT="$ac_cv_path_GMSGFMT"
-if test -n "$GMSGFMT"; then
- echo "$ac_t""$GMSGFMT" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
- fi
- # Extract the first word of "xgettext", so it can be a program name with args.
-set dummy xgettext; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3983: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$XGETTEXT" in
- /*)
- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
- ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
- break
- fi
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
- ;;
-esac
-fi
-XGETTEXT="$ac_cv_path_XGETTEXT"
-if test -n "$XGETTEXT"; then
- echo "$ac_t""$XGETTEXT" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
- USE_INCLUDED_LIBINTL=yes
- CATOBJEXT=.cat
- INSTOBJEXT=.cat
- DATADIRNAME=lib
- INTLDEPS='$(top_builddir)/intl/libintl.a'
- INTLLIBS=$INTLDEPS
- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
- nls_cv_header_intl=intl/libintl.h
- nls_cv_header_libgt=intl/libgettext.h
- fi
-else
- echo "$ac_t""no" 1>&6
-fi
-
- fi
- fi
-
-
if test "$CATOBJEXT" = "NONE"; then
nls_cv_use_gnu_gettext=yes
fi
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4042: checking for $ac_word" >&5
+echo "configure:3947: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4076: checking for $ac_word" >&5
+echo "configure:3981: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4112: checking for $ac_word" >&5
+echo "configure:4017: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
+ BUILD_INCLUDED_LIBINTL=yes
USE_INCLUDED_LIBINTL=yes
CATOBJEXT=.gmo
- INSTOBJEXT=.mo
- DATADIRNAME=share
- INTLDEPS='$(top_builddir)/intl/libintl.a'
- INTLLIBS=$INTLDEPS
- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
- nls_cv_header_intl=intl/libintl.h
- nls_cv_header_libgt=intl/libgettext.h
+ INTLLIBS='$(top_builddir)/intl/libintl.la'
+ LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
fi
if test "$XGETTEXT" != ":"; then
# We need to process the po/ directory.
POSUB=po
- else
- DATADIRNAME=share
- nls_cv_header_intl=intl/libintl.h
- nls_cv_header_libgt=intl/libgettext.h
fi
-
- # If this is used in GNU gettext we have to set USE_NLS to `yes'
- # because some of the sources are only built for this goal.
+ # If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
+ # to 'yes' because some of the testsuite requires it.
if test "$PACKAGE" = gettext; then
- USE_NLS=yes
- USE_INCLUDED_LIBINTL=yes
+ BUILD_INCLUDED_LIBINTL=yes
fi
for lang in $ALL_LINGUAS; do
-
+
+ nls_cv_header_intl=
+ nls_cv_header_libgt=
+
+ DATADIRNAME=share
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:4205: checking for catalogs to be installed" >&5
+echo "configure:4104: checking for catalogs to be installed" >&5
NEW_LINGUAS=
- for lang in ${LINGUAS=$ALL_LINGUAS}; do
- case "$ALL_LINGUAS" in
- *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
- esac
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ for desiredlang in ${LINGUAS-$ALL_LINGUAS}; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ NEW_LINGUAS="$NEW_LINGUAS $presentlang"
+ fi
done
LINGUAS=$NEW_LINGUAS
echo "$ac_t""$LINGUAS" 1>&6
fi
fi
- if test $ac_cv_header_locale_h = yes; then
- INCLUDE_LOCALE_H="#include <locale.h>"
- else
- INCLUDE_LOCALE_H="\
-/* The system does not provide the header <locale.h>. Take care yourself. */"
- fi
-
-
- test -d intl || mkdir intl
- if test "$CATOBJEXT" = ".cat"; then
- sed -e '/^#/d' $srcdir/intl/po2msg.sin > intl/po2msg.sed
- fi
- sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
- $srcdir/intl/po2tbl.sin > intl/po2tbl.sed
-
- if test "$PACKAGE" = "gettext"; then
- GT_NO="#NO#"
- GT_YES=
- else
- GT_NO=
- GT_YES="#YES#"
- fi
-
-
-
MKINSTALLDIRS=
if test -n "$ac_aux_dir"; then
MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
fi
- l=
+ INTL_LIBTOOL_SUFFIX_PREFIX=l
if test -d $srcdir/po; then
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4283: checking for $ac_word" >&5
+echo "configure:4168: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_EMACS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test $EMACS != "no"; then
echo $ac_n "checking where .elc files should go""... $ac_c" 1>&6
-echo "configure:4321: checking where .elc files should go" >&5
+echo "configure:4206: checking where .elc files should go" >&5
lispdir="\$(datadir)/emacs/site-lisp"
emacs_flavor=`echo "$EMACS" | sed -e 's,^.*/,,'`
if test "x$prefix" = "xNONE"; then
trap 'rm -fr `echo "Makefile lib/Makefile intl/Makefile src/Makefile \
po/Makefile.in doc/Makefile tests/Makefile m4/Makefile \
- misc/Makefile misc/gettextize intl/intlh.inst config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+ misc/Makefile misc/gettextize config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
s%@MSGFMT@%$MSGFMT%g
s%@GMSGFMT@%$GMSGFMT%g
s%@XGETTEXT@%$XGETTEXT%g
-s%@GENCAT@%$GENCAT%g
+s%@BUILD_INCLUDED_LIBINTL@%$BUILD_INCLUDED_LIBINTL%g
s%@USE_INCLUDED_LIBINTL@%$USE_INCLUDED_LIBINTL%g
s%@CATALOGS@%$CATALOGS%g
s%@CATOBJEXT@%$CATOBJEXT%g
-s%@DATADIRNAME@%$DATADIRNAME%g
s%@GMOFILES@%$GMOFILES%g
-s%@INSTOBJEXT@%$INSTOBJEXT%g
-s%@INTLDEPS@%$INTLDEPS%g
s%@INTLLIBS@%$INTLLIBS%g
s%@INTLOBJS@%$INTLOBJS%g
s%@POFILES@%$POFILES%g
s%@POSUB@%$POSUB%g
-s%@INCLUDE_LOCALE_H@%$INCLUDE_LOCALE_H%g
-s%@GT_NO@%$GT_NO%g
-s%@GT_YES@%$GT_YES%g
+s%@DATADIRNAME@%$DATADIRNAME%g
s%@MKINSTALLDIRS@%$MKINSTALLDIRS%g
-s%@l@%$l%g
+s%@INTL_LIBTOOL_SUFFIX_PREFIX@%$INTL_LIBTOOL_SUFFIX_PREFIX%g
s%@EMACS@%$EMACS%g
s%@lispdir@%$lispdir%g
s%@ACLOCAL_VERSION@%$ACLOCAL_VERSION%g
CONFIG_FILES=\${CONFIG_FILES-"Makefile lib/Makefile intl/Makefile src/Makefile \
po/Makefile.in doc/Makefile tests/Makefile m4/Makefile \
- misc/Makefile misc/gettextize intl/intlh.inst"}
+ misc/Makefile misc/gettextize"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
fi
fi; done
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-ac_sources="$nls_cv_header_libgt"
-ac_dests="$nls_cv_header_intl"
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-srcdir=$ac_given_srcdir
-while test -n "$ac_sources"; do
- set $ac_dests; ac_dest=$1; shift; ac_dests=$*
- set $ac_sources; ac_source=$1; shift; ac_sources=$*
-
- echo "linking $srcdir/$ac_source to $ac_dest"
-
- if test ! -r $srcdir/$ac_source; then
- { echo "configure: error: $srcdir/$ac_source: File not found" 1>&2; exit 1; }
- fi
- rm -f $ac_dest
-
- # Make relative symlinks.
- # Remove last slash and all that follows it. Not all systems have dirname.
- ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'`
- if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then
- # The dest file is in a subdirectory.
- test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir"
- ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`"
- # A "../" for each directory in $ac_dest_dir_suffix.
- ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'`
- else
- ac_dest_dir_suffix= ac_dots=
- fi
-
- case "$srcdir" in
- [/$]*) ac_rel_source="$srcdir/$ac_source" ;;
- *) ac_rel_source="$ac_dots$srcdir/$ac_source" ;;
- esac
-
- # Make a symlink if possible; otherwise try a hard link.
- if ln -s $ac_rel_source $ac_dest 2>/dev/null ||
- ln $srcdir/$ac_source $ac_dest; then :
- else
- { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
- fi
-done
EOF
cat >> $CONFIG_STATUS <<EOF
EOF
cat >> $CONFIG_STATUS <<\EOF
test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
-case "$CONFIG_FILES" in *po/Makefile.in*)
+case " $CONFIG_FILES " in *" po/Makefile.in "*)
sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
esac
projects / thirdparty / gettext.git / commitdiff
