Found via `codespell -q 3 -S "./CREDITS,*.po" -L abd,asent,atleast,cachable,childrens,contentn,crypted,dne,durationm,enew,exten,inout,leapyear,mye,nd,oclock,offsetp,ot,parm,parms,preceeding,pris,ptd,requestor,re-use,re-used,re-uses,ser,siz,slanguage,slin,thirdparty,varn,varns,ues`
* \brief release all members on the doomed pris list
* \since 13.0
*
- * Called priodically by the monitor threads to release spans marked for
+ * Called periodically by the monitor threads to release spans marked for
* removal.
*/
static void release_doomed_pris(void)
AST_APP_ARG(group); /* channel/group token */
//AST_APP_ARG(ext); /* extension token */
//AST_APP_ARG(opts); /* options token */
- //AST_APP_ARG(other); /* Any remining unused arguments */
+ //AST_APP_ARG(other); /* Any remaining unused arguments */
);
pvt = priv;
AST_APP_ARG(group); /* channel/group token */
AST_APP_ARG(ext); /* extension token */
//AST_APP_ARG(opts); /* options token */
- AST_APP_ARG(other); /* Any remining unused arguments */
+ AST_APP_ARG(other); /* Any remaining unused arguments */
);
ast_mutex_lock(&p->lock);
p->subs[SUB_REAL].inthreeway = 0;
}
} else if (idx == SUB_CALLWAIT) {
- /* Ditch the holding callwait call, and immediately make it availabe */
+ /* Ditch the holding callwait call, and immediately make it available */
if (p->subs[SUB_CALLWAIT].inthreeway) {
/* This is actually part of a three way, placed on hold. Place the third part
on music on hold now */
(*cp == 2) ? "MATE" : "ON", (int) *cp, ast_channel_name(chan));
dahdi_ec_disable(p);
/* otherwise, turn it on */
- if (!p->didtdd) { /* if havent done it yet */
+ if (!p->didtdd) { /* if haven't done it yet */
unsigned char mybuf[41000];/*! \todo XXX This is an abuse of the stack!! */
unsigned char *buf;
int size, res, fd, len;
(p->polarity == POLARITY_REV) &&
((ast_channel_state(ast) == AST_STATE_UP) || (ast_channel_state(ast) == AST_STATE_RING)) ) {
/* Added log_debug information below to provide a better indication of what is going on */
- ast_debug(1, "Polarity Reversal event occured - DEBUG 1: channel %d, state %u, pol= %d, aonp= %d, honp= %d, pdelay= %d, tv= %" PRIi64 "\n", p->channel, ast_channel_state(ast), p->polarity, p->answeronpolarityswitch, p->hanguponpolarityswitch, p->polarityonanswerdelay, ast_tvdiff_ms(ast_tvnow(), p->polaritydelaytv) );
+ ast_debug(1, "Polarity Reversal event occurred - DEBUG 1: channel %d, state %u, pol= %d, aonp= %d, honp= %d, pdelay= %d, tv= %" PRIi64 "\n", p->channel, ast_channel_state(ast), p->polarity, p->answeronpolarityswitch, p->hanguponpolarityswitch, p->polarityonanswerdelay, ast_tvdiff_ms(ast_tvnow(), p->polaritydelaytv) );
if (ast_tvdiff_ms(ast_tvnow(), p->polaritydelaytv) > p->polarityonanswerdelay) {
ast_debug(1, "Polarity Reversal detected and now Hanging up on channel %d\n", p->channel);
ast_debug(1, "Ignoring Polarity switch to IDLE on channel %d, state %u\n", p->channel, ast_channel_state(ast));
}
/* Added more log_debug information below to provide a better indication of what is going on */
- ast_debug(1, "Polarity Reversal event occured - DEBUG 2: channel %d, state %u, pol= %d, aonp= %d, honp= %d, pdelay= %d, tv= %" PRIi64 "\n", p->channel, ast_channel_state(ast), p->polarity, p->answeronpolarityswitch, p->hanguponpolarityswitch, p->polarityonanswerdelay, ast_tvdiff_ms(ast_tvnow(), p->polaritydelaytv) );
+ ast_debug(1, "Polarity Reversal event occurred - DEBUG 2: channel %d, state %u, pol= %d, aonp= %d, honp= %d, pdelay= %d, tv= %" PRIi64 "\n", p->channel, ast_channel_state(ast), p->polarity, p->answeronpolarityswitch, p->hanguponpolarityswitch, p->polarityonanswerdelay, ast_tvdiff_ms(ast_tvnow(), p->polaritydelaytv) );
break;
default:
ast_debug(1, "Dunno what to do with event %d on channel %d\n", res, p->channel);
/*
* Check to see if the channel is still associated with the same
* private structure. While the Asterisk channel was unlocked
- * the following events may have occured:
+ * the following events may have occurred:
*
* 1) A masquerade may have associated the channel with another
* technology or private structure.
int energy;
struct timeval now;
/* State machine dtmfcid_holdoff_state allows for the line to settle
- * before checking agin for dtmf energy. Presently waits for 500 mS before checking again
+ * before checking again for dtmf energy. Presently waits for 500 mS before checking again
*/
if (1 == i->dtmfcid_holdoff_state) {
gettimeofday(&i->dtmfcid_delay, NULL);
if (tmp->use_smdi) {
tmp->smdi_iface = ast_smdi_interface_find(conf->smdi_port);
if (!(tmp->smdi_iface)) {
- ast_log(LOG_ERROR, "Invalid SMDI port specfied, disabling SMDI support\n");
+ ast_log(LOG_ERROR, "Invalid SMDI port specified, disabling SMDI support\n");
tmp->use_smdi = 0;
}
}
AST_APP_ARG(group); /* channel/group token */
//AST_APP_ARG(ext); /* extension token */
//AST_APP_ARG(opts); /* options token */
- AST_APP_ARG(other); /* Any remining unused arguments */
+ AST_APP_ARG(other); /* Any remaining unused arguments */
);
/*
e->command = "pri destroy span";
e->usage =
"Usage: pri destroy span <span>\n"
- " Destorys D-channel of span and its B-channels.\n"
+ " Destroys D-channel of span and its B-channels.\n"
" DON'T USE THIS UNLESS YOU KNOW WHAT YOU ARE DOING.\n";
return NULL;
case CLI_GENERATE:
e->command = "mfcr2 destroy link";
e->usage =
"Usage: mfcr2 destroy link <index-number>\n"
- " Destorys D-channel of link and its B-channels.\n"
+ " Destroys D-channel of link and its B-channels.\n"
" DON'T USE THIS UNLESS YOU KNOW WHAT YOU ARE DOING.\n";
return NULL;
case CLI_GENERATE:
/*! process_dahdi() - ignore keyword 'channel' and similar */
#define PROC_DAHDI_OPT_NOCHAN (1 << 0)
-/*! process_dahdi() - No warnings on non-existing cofiguration keywords */
+/*! process_dahdi() - No warnings on non-existing configuration keywords */
#define PROC_DAHDI_OPT_NOWARN (1 << 1)
static void parse_busy_pattern(struct ast_variable *v, struct ast_dsp_busy_pattern *busy_cadence)
while (c && (i < SIG_PRI_NUM_DCHANS)) {
dchannels[i] = atoi(c + 1);
if (dchannels[i] < 0) {
- ast_log(LOG_WARNING, "D-channel for trunk group %d must be a postiive number at line %d of chan_dahdi.conf\n", trunkgroup, v->lineno);
+ ast_log(LOG_WARNING, "D-channel for trunk group %d must be a positive number at line %d of chan_dahdi.conf\n", trunkgroup, v->lineno);
} else
i++;
c = strchr(c + 1, ',');
} else
ast_verb(2, "Mapped span %d to trunk group %d (logical span %d)\n", spanno, trunkgroup, logicalspan);
} else
- ast_log(LOG_WARNING, "Logical span must be a postive number, or '0' (for unspecified) at line %d of chan_dahdi.conf\n", v->lineno);
+ ast_log(LOG_WARNING, "Logical span must be a positive number, or '0' (for unspecified) at line %d of chan_dahdi.conf\n", v->lineno);
} else
- ast_log(LOG_WARNING, "Trunk group must be a postive number at line %d of chan_dahdi.conf\n", v->lineno);
+ ast_log(LOG_WARNING, "Trunk group must be a positive number at line %d of chan_dahdi.conf\n", v->lineno);
} else
ast_log(LOG_WARNING, "Missing trunk group for span map at line %d of chan_dahdi.conf\n", v->lineno);
} else
- ast_log(LOG_WARNING, "Span number must be a postive integer at line %d of chan_dahdi.conf\n", v->lineno);
+ ast_log(LOG_WARNING, "Span number must be a positive integer at line %d of chan_dahdi.conf\n", v->lineno);
} else {
ast_log(LOG_NOTICE, "Ignoring unknown keyword '%s' in trunkgroups\n", v->name);
}
* However, to maintain old behavior for Asterisk 1.4, these are set to
* 1 by default. When using multiple buckets, search order through these
* containers is considered random, so you will not be able to depend on
- * the order the entires are specified in iax.conf for matching order. */
+ * the order the entries are specified in iax.conf for matching order. */
#ifdef LOW_MEMORY
#define MAX_PEER_BUCKETS 17
#else
/*!
* \brief Another container of iax2_pvt structures
*
- * Active IAX2 pvt structs used during transfering a call are stored here.
+ * Active IAX2 pvt structs used during transferring a call are stored here.
*/
static struct ao2_container *iax_transfercallno_pvts;
}
/*!
- * \note This funtion calls realtime_peer -> reg_source_db -> iax2_poke_peer -> find_callno,
+ * \note This function calls realtime_peer -> reg_source_db -> iax2_poke_peer -> find_callno,
* so do not call it with a pvt lock held.
*/
static struct iax2_peer *find_peer(const char *name, int realtime)
};
ast_sockaddr_copy(&tmp_pvt.addr, addr);
- /* this works for finding normal call numbers not involving transfering */
+ /* this works for finding normal call numbers not involving transferring */
if ((pvt = ao2_find(iax_peercallno_pvts, &tmp_pvt, OBJ_POINTER))) {
if (return_locked) {
ast_mutex_lock(&iaxsl[pvt->callno]);
if ( (unsigned int)ms < p->lastsent )
ms = p->lastsent;
} else {
- /* On a dataframe, use last value + 3 (to accomodate jitter buffer shrinking) if appropriate unless
+ /* On a dataframe, use last value + 3 (to accommodate jitter buffer shrinking) if appropriate unless
it's a genuine frame */
adjust = (ms - p->lastsent);
if (genuine) {
remove_by_peercallno(pvt);
}
pvt->peercallno = peercallno;
- /*this is where the transfering call switches hash tables */
+ /*this is where the transferring call switches hash tables */
store_by_peercallno(pvt);
pvt->transferring = TRANSFER_NONE;
pvt->svoiceformat = -1;
if (ies.calltoken && ies.calltokendata) {
/* if we've gotten this far, and the calltoken ie data exists,
* then calltoken validation _MUST_ have taken place. If calltoken
- * data is provided, it is always validated reguardless of any
+ * data is provided, it is always validated regardless of any
* calltokenoptional or requirecalltoken options */
new = NEW_ALLOW_CALLTOKEN_VALIDATED;
} else {
<since>
<version>11.0.0</version>
</since>
- <synopsis>Accout code for CDR purposes</synopsis>
+ <synopsis>Account code for CDR purposes</synopsis>
</configOption>
<configOption name="allow">
<since>
}
}
-/*! \brief Internal helper function which enables video support on a sesson if possible */
+/*! \brief Internal helper function which enables video support on a session if possible */
static void jingle_enable_video(struct jingle_session *session)
{
struct ast_sockaddr tmp;
}
/* If the owner changed while everything was unlocked, no problem,
- * just start over and everthing will work. This is rare, do not be
+ * just start over and everything will work. This is rare, do not be
* confused by this loop and think this it is an expensive operation.
* The majority of the calls to this function will never involve multiple
* executions of this loop. */
iks_delete(iq);
}
-/*! \brief Internal function which sends a session-inititate message */
+/*! \brief Internal function which sends a session-initiate message */
static void jingle_send_session_initiate(struct jingle_session *session)
{
jingle_send_session_action(session, session->transport == JINGLE_TRANSPORT_GOOGLE_V1 ? "initiate" : "session-initiate");
}
if (aco_info_init(&cfg_info)) {
- ast_log(LOG_ERROR, "Unable to intialize configuration for chan_motif.\n");
+ ast_log(LOG_ERROR, "Unable to initialize configuration for chan_motif.\n");
goto end;
}
int callhistory; /*!< Allowed to record call history */
int sharp_dial; /*!< Execute Dial on '#' or not */
char lst_cid[TEXT_LENGTH_MAX]; /*!< Last callerID received */
- char lst_cnm[TEXT_LENGTH_MAX]; /*!< Last callername recevied */
+ char lst_cnm[TEXT_LENGTH_MAX]; /*!< Last callername received */
char call_forward[AST_MAX_EXTENSION]; /*!< Forward number */
int output; /*!< Handset, headphone or speaker */
int previous_output; /*!< Previous output */
ast_mutex_t lock;
struct sockaddr_in sin; /*!< IP address of the phone */
struct sockaddr_in sout; /*!< IP address of server */
- int timeout; /*!< time-out in ticks : resend packet if no ack was received before the timeout occured */
+ int timeout; /*!< time-out in ticks : resend packet if no ack was received before the timeout occurred */
unsigned short seq_phone; /*!< sequence number for the next packet (when we receive a request) */
unsigned short seq_server; /*!< sequence number for the next packet (when we send a request) */
unsigned short last_seq_ack; /*!< sequence number of the last ACK received */
int last_buf_available; /*!< number of a free slot */
int nb_retransmit; /*!< number of retransmission */
int state; /*!< state of the phone (see phone_state) */
- int size_buff_entry; /*!< size of the buffer used to enter datas */
- char buff_entry[16]; /*!< Buffer for temporary datas */
+ int size_buff_entry; /*!< size of the buffer used to enter data */
+ char buff_entry[16]; /*!< Buffer for temporary data */
char macaddr[18]; /*!< mac address of the phone (not always available) */
char firmware[8]; /*!< firmware of the phone (not always available) */
struct wsabuf wsabufsend[MAX_BUF_NUMBER]; /*!< Size of each paquet stored in the buffer array & pointer to this buffer */
- unsigned char buf[MAX_BUF_NUMBER][MAX_BUF_SIZE]; /*!< Buffer array used to keep the lastest non-acked paquets */
+ unsigned char buf[MAX_BUF_NUMBER][MAX_BUF_SIZE]; /*!< Buffer array used to keep the latest non-acked paquets */
struct unistim_device *device;
struct unistimsession *next;
} *sessions = NULL;
#endif
if (sendmsg(unistimsock, &msg, 0) == -1) {
- display_last_error("Error sending datas");
+ display_last_error("Error sending data");
}
#else
if (sendto(unistimsock, data, size, 0, (struct sockaddr *) addr_to, sizeof(*addr_to))
== -1)
- display_last_error("Error sending datas");
+ display_last_error("Error sending data");
#endif
}
/*#ifdef DUMP_PACKET */
if (unistimdebug) {
- ast_verb(0, "Sending datas with seq #0x%04x Using slot #%d :\n", (unsigned)pte->seq_server, buf_pos);
+ ast_verb(0, "Sending data with seq #0x%04x Using slot #%d :\n", (unsigned)pte->seq_server, buf_pos);
}
/*#endif */
send_raw_client(pte->wsabufsend[buf_pos].len, pte->wsabufsend[buf_pos].buf, &(pte->sin),
struct unistim_line *line;
struct unistim_subchannel *sub;
- ast_verb(3, "Device '%s' successfuly registered\n", pte->device->name);
+ ast_verb(3, "Device '%s' successfully registered\n", pte->device->name);
AST_LIST_LOCK(&pte->device->subs);
AST_LIST_TRAVERSE_SAFE_BEGIN(&pte->device->subs, sub, list) {
if (sub) {
- ast_log(LOG_ERROR, "Subchannel lost sice reboot. Hanged channel may apear!\n");
+ ast_log(LOG_ERROR, "Subchannel lost sice reboot. Hanged channel may appear!\n");
AST_LIST_REMOVE_CURRENT(list);
ast_free(sub);
}
sizeof(pte->device->call_forward) - 1);
pte->device->call_forward[0] = '\0';
send_icon(TEXT_LINE0, FAV_ICON_NONE, pte);
- pte->device->output = OUTPUT_HANDSET; /* Seems to be reseted somewhere */
+ pte->device->output = OUTPUT_HANDSET; /* Seems to be reset somewhere */
show_main_page(pte);
break;
}
}
session->state = STATE_RINGING;
send_callerid_screen(session, sub);
- if (ast_strlen_zero(ast_channel_call_forward(ast))) { /* Send ring only if no call forward, otherwise short ring will apear */
+ if (ast_strlen_zero(ast_channel_call_forward(ast))) { /* Send ring only if no call forward, otherwise short ring will appear */
send_text(TEXT_LINE2, TEXT_NORMAL, session, ustmtext("is calling you.", session));
send_text_status(session, ustmtext("Accept Ignore Hangup", session));
case 0:
if ((cur < '0') && (cur > '5')) {
ast_log(LOG_WARNING,
- "sendtext failed : position must be a number beetween 0 and 5\n");
+ "sendtext failed : position must be a number between 0 and 5\n");
return 1;
}
pos = cur - '0';
case 2:
if ((cur < '3') && (cur > '6')) {
ast_log(LOG_WARNING,
- "sendtext failed : icon must be a number beetween 32 and 63 (first digit invalid)\n");
+ "sendtext failed : icon must be a number between 32 and 63 (first digit invalid)\n");
return 1;
}
icon = (cur - '0') * 10;
case 3:
if ((cur < '0') && (cur > '9')) {
ast_log(LOG_WARNING,
- "sendtext failed : icon must be a number beetween 32 and 63 (second digit invalid)\n");
+ "sendtext failed : icon must be a number between 32 and 63 (second digit invalid)\n");
return 1;
}
icon += (cur - '0');
case 4:
if (cur != '@') {
ast_log(LOG_WARNING,
- "sendtext failed : icon must be a number beetween 32 and 63 (too many digits)\n");
+ "sendtext failed : icon must be a number between 32 and 63 (too many digits)\n");
return 1;
}
tok = 5;
d = devices;
while (d) {
if (!strcmp(d->name, cat)) {
- /* Yep, we alreay have this one */
+ /* Yep, we already have this one */
if (unistimsock < 0) {
/* It's a dupe */
ast_log(LOG_WARNING, "Duplicate entry found (%s), ignoring.\n", cat);
} else if (!strcasecmp(v->name, "contrast")) {
d->contrast = atoi(v->value);
if ((d->contrast < 0) || (d->contrast > 15)) {
- ast_log(LOG_WARNING, "contrast must be beetween 0 and 15\n");
+ ast_log(LOG_WARNING, "contrast must be between 0 and 15\n");
d->contrast = 8;
}
} else if (!strcasecmp(v->name, "nat")) {
* \param env = pointer to the video environment descriptor
*
* returns:
- * - 0 on falure switching from off to on
+ * - 0 on failure switching from off to on
* - 1 on success in switching from off to on
* - 2 on success in switching from on to off
*/
p->status_index |= IS_ON;
/* print the new message in the message board */
update_device_info(env, index);
- return 1; /* open succeded */
+ return 1; /* open succeeded */
}
return 0; /* failure */
} else {
/* Some helper variables used for filling the SDL window */
int x0; /* the x coordinate of the center of the keypad */
- int x1; /* userful for calculating of the size of the parent window */
+ int x1; /* useful for calculating of the size of the parent window */
int y0; /* y coordinate of the keypad, the remote window and the local window */
int src_wins_tot_w; /* total width of the source windows */
int i;
SDL_WM_SetCaption("Asterisk console Video Output", NULL);
- /* intialize the windows for local and remote video */
+ /* initialize the windows for local and remote video */
if (set_win(gui->screen, &gui->win[WIN_REMOTE], dpy_fmt,
env->rem_dpy.w, env->rem_dpy.h, x0-kp_w/2-BORDER-env->rem_dpy.w, y0))
goto no_sdl;
* The overall descriptor, with room for config info, video source and
* received data descriptors, SDL info, etc.
* This should be globally visible to all modules (grabber, vcodecs, gui)
- * and contain all configurtion info.
+ * and contain all configuration info.
*/
struct video_desc {
char codec_name[64]; /* the codec we use */
/*! \brief Try to open video sources, return 0 on success, 1 on error
* opens all video sources found in the oss.conf configuration files.
- * Saves the grabber and the datas in the device table (in the devices field
+ * Saves the grabber and the data in the device table (in the devices field
* of the descriptor referenced by v).
* Initializes the device_primary and device_secondary
* fields of v with the first devices that was
continue;
/* for each type of grabber supported... */
for (j = 0; (g = console_grabbers[j]); j++) {
- /* the grabber is opened and the informations saved in the device table */
+ /* the grabber is opened and the information saved in the device table */
g_data = g->open(v->devices[i].name, &v->loc_src_geometry, v->fps);
if (!g_data)
continue;
* \param fps = frame per seconds, for every device
*
* returns:
- * - NULL on falure
+ * - NULL on failure
* - reference to the device buffer on success
*/
static struct fbuf_t *grabber_read(struct video_device *dev, int fps)
* grabber_read on each device in the device table.
* it encodes the primary source buffer, if the picture in picture mode is
* enabled it encodes (in the buffer to split) the secondary source buffer too.
- * The encoded buffer is splitted to build the local and the remote view.
+ * The encoded buffer is split to build the local and the remote view.
* Return a list of ast_frame representing the video fragments.
* The head pointer is returned by the function, the tail pointer
* is returned as an argument.
*
* \param env = video environment descriptor
- * \param tail = tail ponter (practically a return value)
+ * \param tail = tail pointer (practically a return value)
*/
static struct ast_frame *get_video_frames(struct video_desc *env, struct ast_frame **tail)
{
*/
video_out_init(env);
- /* Writes intial status of the sources. */
+ /* Writes initial status of the sources. */
if (env->gui) {
for (i = 0; i < env->out.device_num; i++) {
print_message(env->gui->thumb_bd_array[i].board,
* \param object A pointer the object to operate on.
* \param destructor The destructor to call if the object is no longer referenced. It will be passed the pointer as an argument.
*
- * This macro unreferences an object and calls the specfied destructor if the
+ * This macro unreferences an object and calls the specified destructor if the
* object is no longer referenced. The destructor should free the object if it
* was dynamically allocated.
*/
* \param eval A statement to evaluate in the iteration loop.
*
* This is macro is a little complicated, but it may help to think of it as a
- * loop. Basically it iterates through the specfied containter as long as the
+ * loop. Basically it iterates through the specified container as long as the
* condition is met. Two variables, iterator and next, are provided for use in
* your \p eval statement. See the sample code for an example.
*
* \param container A pointer to the container to search.
* \param namestr The name to search for.
*
- * Use this function to find an object with the specfied name in a container.
+ * Use this function to find an object with the specified name in a container.
*
* \note When the returned object is no longer in use, #ASTOBJ_UNREF() should
* be used to free the additional reference created by this macro.
* \param container A pointer to the container to operate on.
* \param obj A pointer to the object to remove.
*
- * This macro iterates through a container and removes the specfied object if
+ * This macro iterates through a container and removes the specified object if
* it exists in the container.
*
* \note This macro does not destroy any objects, it simply unlinks
* \param namestr The name of the object to remove.
*
* This macro iterates through a container and removes the first object with
- * the specfied name from the container.
+ * the specified name from the container.
*
* \note This macro does not destroy any objects, it simply unlinks
* them. No destructors are called.
* \param container A pointer to the container to prune.
* \param destructor A destructor function to call on each marked object.
*
- * This macro iterates through the specfied container and prunes any marked
- * objects executing the specfied destructor if necessary.
+ * This macro iterates through the specified container and prunes any marked
+ * objects executing the specified destructor if necessary.
*/
#define ASTOBJ_CONTAINER_PRUNE_MARKED(container,destructor) \
do { \
/*! \brief Destroy a container.
*
- * \param container A pointer to the container to destory.
+ * \param container A pointer to the container to destroy.
*
* This macro frees up resources used by a container. It does not operate on
* the objects in the container. To unlink the objects from the container use
* \param obj A pointer to the object to dump.
*
* This macro dumps a text representation of the name, objectflags, and
- * refcount fields of an object to the specfied string buffer.
+ * refcount fields of an object to the specified string buffer.
*/
#define ASTOBJ_DUMP(s,slen,obj) \
snprintf((s),(slen),"name: %s\nobjflags: %u\nrefcount: %u\n\n", (obj)->name, (obj)->objflags, (obj)->refcount);
* \c callback function each time it is invoked.
*
* This function visits each of the elements in the IAX firmware list, calling
- * the specfied \c callback for each element. Iteration continues until the end
+ * the specified \c callback for each element. Iteration continues until the end
* of the list is reached, or the \c callback returns non-zero.
*
* The \c callback function receives a pointer to the firmware header and the
int iseqno;
/*! Retransmission ID */
int retrans;
- /*! is this packet encrypted or not. if set this varible holds encryption methods*/
+ /*! is this packet encrypted or not. if set this variable holds encryption methods*/
int encmethods;
/*! store encrypt key */
ast_aes_encrypt_key ecx;
#include "parser.h"
-#define PROV_IE_USEDHCP 1 /* Presense only */
+#define PROV_IE_USEDHCP 1 /* Presence only */
#define PROV_IE_IPADDR 2 /* 32-bit */
#define PROV_IE_SUBNET 3 /* 32-bit */
#define PROV_IE_GATEWAY 4 /* 32-bit */
</synopsis>
<syntax>
<parameter name="to" required="false">
- <para>Abritrary URI to which to send the NOTIFY. If none is specified, send inside
+ <para>Arbitrary URI to which to send the NOTIFY. If none is specified, send inside
the SIP dialog for the current channel.</para>
</parameter>
<parameter name="content" required="true">
/* Need to hold the lock for real-call, private, and call-waiting call */
analog_lock_sub_owner(p, ANALOG_SUB_CALLWAIT);
if (!p->subs[ANALOG_SUB_CALLWAIT].owner) {
- /* The call waiting call dissappeared. */
+ /* The call waiting call disappeared. */
analog_set_new_owner(p, NULL);
break;
}
analog_lock_sub_owner(p, ANALOG_SUB_CALLWAIT);
if (!p->subs[ANALOG_SUB_CALLWAIT].owner) {
/*
- * The call waiting call dissappeared.
+ * The call waiting call disappeared.
* Let's just ignore this flash-hook.
*/
ast_log(LOG_NOTICE, "Whoa, the call-waiting call disappeared.\n");
analog_lock_sub_owner(p, ANALOG_SUB_THREEWAY);
if (!p->subs[ANALOG_SUB_THREEWAY].owner) {
/*
- * The 3-way call dissappeared.
+ * The 3-way call disappeared.
* Let's just ignore this flash-hook.
*/
ast_log(LOG_NOTICE, "Whoa, the 3-way call disappeared.\n");
}
/* Added more log_debug information below to provide a better indication of what is going on */
- ast_debug(1, "Polarity Reversal event occured - DEBUG 2: channel %d, state %u, pol= %d, aonp= %d, honp= %d, pdelay= %d, tv= %" PRIi64 "\n", p->channel, ast_channel_state(ast), p->polarity, p->answeronpolarityswitch, p->hanguponpolarityswitch, p->polarityonanswerdelay, ast_tvdiff_ms(ast_tvnow(), p->polaritydelaytv) );
+ ast_debug(1, "Polarity Reversal event occurred - DEBUG 2: channel %d, state %u, pol= %d, aonp= %d, honp= %d, pdelay= %d, tv= %" PRIi64 "\n", p->channel, ast_channel_state(ast), p->polarity, p->answeronpolarityswitch, p->hanguponpolarityswitch, p->polarityonanswerdelay, ast_tvdiff_ms(ast_tvnow(), p->polaritydelaytv) );
break;
default:
ast_debug(1, "Dunno what to do with event %d on channel %d\n", res, p->channel);
sig_pri_open_media(pri->pvts[chanpos]);
} else if (pri->inband_on_proceeding) {
/*
- * XXX This is to accomodate a broken switch that sends a
+ * XXX This is to accommodate a broken switch that sends a
* PROCEEDING without any progress indication ie for
* inband audio. This should be part of the conditional
* test above to bring the voice path up.
AST_APP_ARG(group); /* channel/group token */
AST_APP_ARG(ext); /* extension token */
//AST_APP_ARG(opts); /* options token */
- AST_APP_ARG(other); /* Any remining unused arguments */
+ AST_APP_ARG(other); /* Any remaining unused arguments */
);
/* Get private copy of dial string and break it up. */
AST_APP_ARG(group); /* channel/group token */
AST_APP_ARG(ext); /* extension token */
AST_APP_ARG(opts); /* options token */
- AST_APP_ARG(other); /* Any remining unused arguments */
+ AST_APP_ARG(other); /* Any remaining unused arguments */
);
struct ast_flags opts;
char *opt_args[OPT_ARG_ARRAY_SIZE];
* if there is some error when attempting to process
* the incoming CC request.
*
- * The duty of this is to issue a propper response to a
+ * The duty of this is to issue a proper response to a
* CC request from the caller by acknowledging receipt
* of that request or rejecting it.
*/
/*! \brief Channel reset/restart state. */
enum sig_pri_reset_state resetting;
#if defined(HAVE_PRI_TRANSFER)
- /*! If non-NULL, send transfer disconnect successfull response to first call disconnecting. */
+ /*! If non-NULL, send transfer disconnect successful response to first call disconnecting. */
struct xfer_rsp_data *xfer_data;
#endif /* defined(HAVE_PRI_TRANSFER) */
int prioffset; /*!< channel number in span */
/*!
* \brief Indication of the call being a CUG call and its permissions.
* \note 0 or 1 - non-CUG call
- * \note 2 - CUG call, outgoing access alowed
- * \note 3 - CUG call, outgoing access not alowed
+ * \note 2 - CUG call, outgoing access allowed
+ * \note 3 - CUG call, outgoing access not allowed
*/
unsigned char cug_indicator;
};
/*! \brief actually call the encoder */
typedef int (*encoder_encode_f)(struct video_out_desc *v);
-/*! \brief encapsulate the bistream in RTP frames */
+/*! \brief encapsulate the bitstream in RTP frames */
typedef struct ast_frame *(*encoder_encap_f)(struct fbuf_t *, int mtu,
struct ast_frame **tail);
-/*! \brief inizialize the decoder */
+/*! \brief initialize the decoder */
typedef int (*decoder_init_f)(AVCodecContext *enc_ctx);
/*! \brief extract the bitstream from RTP frames and store in the fbuf.
* FP = 0- mode A, (only one word of header)
* FP = 10 mode B, and also means this is an I or P frame
* FP = 11 mode C, and also means this is a PB frame.
- * SBIT, EBIT nuber of bits to ignore at beginning (msbits) and end (lsbits)
+ * SBIT, EBIT number of bits to ignore at beginning (msbits) and end (lsbits)
* SRC bits 6,7,8 from the h263 PTYPE field
* I = 0 intra-coded, 1 = inter-coded (bit 9 from PTYPE)
* U = 1 for Unrestricted Motion Vector (bit 10 from PTYPE)
projects / thirdparty / asterisk.git / commitdiff
