Add format specification

diff --git a/doc/zstd_seekable_compression_format.md b/doc/zstd_seekable_compression_format.md
new file mode 100644 (file)
index 0000000..fd0593f
--- /dev/null
+++ b/doc/zstd_seekable_compression_format.md
@@ -0,0 +1,107 @@
+# Zstandard Seekable Format
+
+### Notices
+
+Copyright (c) 2017-present Facebook, Inc.
+
+Permission is granted to copy and distribute this document
+for any purpose and without charge,
+including translations into other languages
+and incorporation into compilations,
+provided that the copyright notice and this notice are preserved,
+and that any substantive changes or deletions from the original
+are clearly marked.
+Distribution of this document is unlimited.
+
+### Version
+0.1.0 (11/04/17)
+
+## Introduction
+This document defines a format for compressed data to be stored so that subranges of the data can be efficiently decompressed without requiring the entire document to be decompressed.
+This is done by splitting up the input data into chunks,
+each of which are compressed independently,
+and so can be decompressed independently.
+Decompression then takes advantage of a provided 'seek table', which allows the decompressor to immediately jump to the desired data.  This is done in a way that is compatible with the original Zstandard format by placing the seek table in a Zstandard skippable frame.
+
+### Overall conventions
+In this document:
+- square brackets i.e. `[` and `]` are used to indicate optional fields or parameters.
+- the naming convention for identifiers is `Mixed_Case_With_Underscores`
+- All numeric fields are little-endian unless specified otherwise
+
+## Format
+
+The format consists of a number of chunks (Zstandard compressed frames and skippable frames), followed by a final skippable frame at the end containing the seek table.
+
+### Seek Table Format
+The structure of the seek table frame is as follows:
+
+|`Skippable_Magic_Number`|`Frame_Size`|`[Seek_Table_Entries]`|`Seek_Table_Footer`|
+|------------------------|------------|----------------------|-------------------|
+| 4 bytes                | 4 bytes    | 8-12 bytes each      | 9 bytes           |
+
+__`Skippable_Magic_Number`__
+
+Value : 0x184D2A5?, which means any value from 0x184D2A50 to 0x184D2A5F.
+All 16 values are valid to identify a skippable frame.
+This is for compatibility with [Zstandard skippable frames].
+
+__`Frame_Size`__
+
+The total size of the skippable frame, not including the `Skippable_Magic_Number` or `Frame_Size`.  This is for compatibility with [Zstandard skippable frames].
+
+[Zstandard skippable frames]: https://github.com/facebook/zstd/blob/master/doc/zstd_compression_format.md#skippable-frames
+
+#### `Seek_Table_Footer`
+The seek table footer format is as follows:
+
+|`Number_Of_Chunks`|`Seek_Table_Descriptor`|`Seekable_Magic_Number`|
+|------------------|-----------------------|-----------------------|
+| 4 bytes          | 1 byte                | 4 bytes               |
+
+__`Number_Of_Chunks`__
+
+The number of stored chunks in the data.
+
+__`Seek_Table_Descriptor`__
+
+A bitfield describing the format of the seek table.
+
+| Bit number | Field name                |
+| ---------- | ----------                |
+| 7          | `Checksum_Flag`           |
+| 6-2        | `Reserved_Bits`           |
+| 1-0        | `Unused_Bits`             |
+
+While only `Checksum_Flag` currently exists, there are 7 other bits in this field that can be used for future changes to the format,
+for example the addition of inline dictionaries.
+
+__`Checksum_Flag`__
+
+If the checksum flag is set, each of the seek table entries contains a 4 byte checksum of the uncompressed data contained in its chunk.
+
+`Reserved_Bits` are not currently used but may be used in the future for breaking changes, so a compliant decoder should ensure they are set to 0.  `Unused_Bits` may be used in the future for non-breaking changes, so a compliant decoder should not interpret these bits.
+
+#### __`Seek_Table_Entries`__
+
+`Seek_Table_Entries` consists of `Number_Of_Chunks` (one for each chunk in the data, not including the seek table frame) entries of the following form, in sequence:
+
+|`Compressed_Size`|`Decompressed_Size`|`[Checksum]`|
+|-----------------|-------------------|------------|
+| 4 bytes         | 4 bytes           | 4 bytes    |
+
+__`Compressed_Size`__
+
+The compressed size of the chunk.
+The cumulative sum of the `Compressed_Size` fields of chunks `0` to `i` gives the offset in the compressed file of chunk `i+1`.
+
+__`Decompressed_Size`__
+
+The size of the decompressed data contained in the chunk.  For skippable or otherwise empty frames, this value is 0.
+
+__`Checksum`__
+
+Only present if `Checksum_Flag` is set in the `Seek_Table_Descriptor`.  Value : the least significant 32 bits of the XXH64 digest of the uncompressed data, stored in little-endian format.
+
+## Version Changes
+- 0.1.0: initial version

diff --git a/lib/decompress/zstdseek_decompress.c b/lib/decompress/zstdseek_decompress.c
index 5e303f26b81ff8db9f33a793ff01ce1d0fea686f..92901befaaf012ebcbe97ed6df58e9cafbfd51d3 100644 (file)
--- a/lib/decompress/zstdseek_decompress.c
+++ b/lib/decompress/zstdseek_decompress.c
@@ -121,6 +121,11 @@ size_t ZSTD_seekable_loadSeekTable(ZSTD_seekable_DStream* zds, const void* src,
 
     {   BYTE const sfd = ip[-5];
         checksumFlag = sfd >> 7;
+
+        /* check reserved bits */
+        if ((checksumFlag >> 2) & 0x1f) {
+            return ERROR(corruption_detected);
+        }
     }
 
     numChunks = MEM_readLE32(ip-9);